Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Observations of electrons at the lunar surface

Observations of electrons at the Apollo 12 and 15 sites by the ALSEP Solar Wind Spectrometer experiments showed qualitative differences. Measurements of photoelectron currents are compared to earlier predictions and calculations. A model describing the interaction of the solar wind and the lunar photoelectron layer is then developed. The observations at the Apollo 15 site are compared to the model. Then, Apollo 12 data are examined to determine the effects of the local lunar magnetic fields. Finally, it is predicted that electron pressure decreases upstream of the moon and in certain circumstances should cause an increase in proton density.

Goldstein, B. E.↗
NASA NTRS1977

Geomagnetic activity: Dependence on solar wind parameters

Current ideas about the interaction between the solar wind and the earth's magnetosphere are reviewed. The solar wind dynamic pressure as well as the influx of interplanetary magnetic field lines are both important for the generation of geomagnetic activity. The influence of the geometry of the situation as well as the variability of the interplanetary magnetic field are both found to be important factors. Semi-annual and universal time variations are discussed as well as the 22-year cycle in geomagnetic activity. All three are found to be explainable by the varying geometry of the interaction. Long term changes in geomagnetic activity are examined.

Svalgaard, L.↗
NASA NTRS1981

Precision timekeeping using a small passive hydrogen maser

The timekeeping ability of a prototype passive hydrogen maser which is a factor of 5 smaller in size, weight, and cost than any previously designed, was compared to UTC (NBS) based on 10 cesium frequency standards including a large primary standard, NBS-4. The frequency of the prototype was monitored as a function of source pressure, cavity temperature, microwave power, modulation width, and magnetic field. Based on these measurements, a frequency stability of better than 6 x 10 to the -15 power was expected, implying a timekeeping ability of order 0.5 ns/day. Measurements vs UTC(NBS) indicate a joint timekeeping a stability of order 1.2 ns/day. Simultaneous measurements made between NBS-4, UTC(6600), and the small passive me maser show peak to peak time variations of the small maser vs UTC(6600) was 10 ns for the full 32 days if the average rate and drift are considered. Frequency stability of the small prototype vs UTC (NBS) was to 1.1 x 10 to the -14th power for tau = 1 to 8 days.

Walls, F. L.↗
NASA NTRS1983

Measurement of coronal X-ray emission lines from Capella

The Einstein Observatory's Focal Plane Crystal Spectrometer has detected X-ray emission lines due to O VIII, Fe XVII, and Fe XX, from the binary star system Capella. Line luminosities are well fitted by an emitting plasma at a single temperature of 6.29 + or - 0.01 - 0.03 million K, and a volume emission measure of about 8.6 x 10 to the 52nd/cu cm, corresponding to the low temperature component previously observed. A high temperature component is undetectable, since the observed lines are not produced in plasma at temperatures above about 20 million K. Nearly isothermal plasma would be expected if many of the magnetically confined coronal loops have similar sizes and pressures, and a second population of longer loops would be required to account for the hotter component. An alternative interpretation of the observed X-ray line emission and upper limit is that the plasma contains a continuous distribution of emission measure versus temperature that rises sharply to 3 million K and then falls by nearly a decade to 16 million. An extrapolation of the loop sizes suggested by this alternative to hotter, longer loops may also account for the higher temperature emission.

Vedder, P. W.↗
NASA NTRS1985

On the relation between 'mixing length' and 'direct interaction approximation' theories of turbulence

The capabilities of direct interaction approximations (DIA) and weak-coupling approximations (WCA) in modeling turbulence in plasma physics studies are examined. DIA and WCA formalisms are reviewed and a DIA expression for homogeneous incompressible hydrodynamics is simplified to derive an energy spectrum in an arbitrary wavenumber space. A solution is defined for the expression when applied to long wavelength phenomena generated by an instability. The equation is further generalized to yield a transport equation for modeling the spectrum generated by homogeneous turbulence in a linearly unstable system undergoing nonlinear interaction. Finally, the technique is applied to two-dimensional turbulence in a low pressure, weakly ionized plasma embedded in a homogeneous magnetic field and experiencing instabilities caused by electron density and electric potential gradients, such as found in the ionospheric E region.

Sudan, R. N.↗
NASA NTRS1992

Wide gap, permanent magnet biased magnetic bearing system

The unique features and applications of the presented electrical permanent magnetic bearing system essentially result from three facts: (1) the only bearing rotor components are nonlaminated ferromagnetic steel collars or cylinders; (2) all radial and axial forces are transmitted via radial gaps; and (3) large radial bearing gaps can be provided with minimum electric power consumption. The large gaps allow for effective encapsulation and shielding of the rotors at elevated or low temperatures, corrosive or ultra clean atmosphere or vacuum or high pressure environment. Two significant applications are described: (1) a magnetically suspended x ray rotary anode was operated under high vacuum conditions at 100 KV anode potential, 600 C temperature at the rotor collars and speed 18000 rpm with 13 mm radial bearing gap; and (2) an improved Czochralski type crystal growth apparatus using the hot wall method for pulling GaAs single crystals of low dislocation density. Both crystal and crucible are carried and transported by magnetically suspended shafts inside a hermetically sealed housing at 800 C shaft and wall temperature. The radial magnetic bearing gap measures 24 mm.

Boden, Karl↗
NASA NTRS1991

Cosmic rays in the Small Magellanic Cloud

The SMC is investigated in order to determine whether this galaxy is in dynamic quasi-stable equilibrium between the expansive pressure of the hot cosmic ray gas, the magnetic fields, and the kinetic motion of interstellar gas and the gravitational attraction of matter. It is argued that the cosmic ray density level is three to five times smaller than that which would exist if the galaxy were in approximate dynamic equilibrium and cosmic ray sources were adequate. The scale of coupling between the cosmic rays and matter in the projected dimension that can be observed is less than 0.5 kpc, which is rather small to be consistent with a stable cosmic ray distribution. The observed matter distribution and the calculated cosmic ray density distribution are used to determine the expected gamma ray intensity distribution.

Sreekumar, P.↗
NASA NTRS1994

Physics and evolution of constant opening angle jets using a quasi-one-dimensional magnetohydrodynamic model

We discuss the significance of the assumptions of infinite conductivity and time independence in the context of an ideal MHD model for constant opening angle jets. The model is developed by projecting the MHD equations onto the jet axis. We find that for initially sub-Alfvenic flows (i.e., flows emanating from active galactic nuclei and neutron stars) wind-type solutions exist only when the field lines at the origin are wound up in a direction opposite to the direction of rotation of the compact source. We discuss the possibility that the time evolution of these outflows may be a cycle between breeze- and wind-type solutions as a result of continuous changes in the boundary conditions at the origin due to accretion. We propose that such cycles may explain the apparent one-sideness of some jets, especially the ones for which we cannot use arguments of relativistic beaming. We examine the dependence of the wind-type solutions on the following parameters describing the outflow at the origin: the degree of winding of the field lines, the value of the gas pressure, the polytropic index, the strength of the magnetic field, the value of the rotational velocity, the gravitational potential of the compact object, and the injection velocity. We compare results with results obtained previously, and discuss briefly the qualitative features and physical interpretation of the solutions for outflows emanating from neutron stars and protostars.

Koupelis, Theodoros↗
NASA NTRS1995

The Superfluid Transition of Helium-4 in the Presence of an Applied Heat Flow in 1-g and Below: Comparison between Experiment and Numerical Simulations

Reported are thermal conductivity measurements of liquid Helium-4 at saturated vapor pressure. measurements were made inside a super- conducting magnet. The thermal conductivity measurements consist of ramping the temperature at the cell top while passing a constant heat current through the cell from the bottom. Numerical results are quantitatively compared with the observed experimental behavior.

superfluid helium-4 numerical simulations thermal ↗
NASA NTRS1999

NEPP Cots Mems Programs

Explore the source record for details and available documents.

COTS Microelectromechanical Systems MEMS reliabili↗
NASA NTRS1995

Deposition of diamond-like films by ECR microwave plasma

Hard amorphous hydrogenated carbon, diamond-like films are deposited using an electron cyclotron resonance microwave plasma with a separate radio frequency power bias applied to a substrate stage. The electron cyclotron resonance microwave plasma yields low deposition pressure and creates ion species otherwise unavailable. A magnetic mirror configuration extracts special ion species from a plasma chamber. Different levels of the radio frequency power bias accelerate the ion species of the ECR plasma impinging on a substrate to form different diamond-like films. During the deposition process, a sample stage is maintained at an ambient temperature of less than 100.degree. C. No external heating is applied to the sample stage. The deposition process enables diamond-like films to be deposited on heat-sensitive substrates.

Shing, Yuh-Han↗
NASA NTRS2016

Electron Flux Models for Different Energies at Geostationary Orbit

Forecast models were derived for energetic electrons at all energy ranges sampled by the third-generation Geostationary Operational Environmental Satellites (GOES). These models were based on Multi-Input Single-Output Nonlinear Autoregressive Moving Average with Exogenous inputs methodologies. The model inputs include the solar wind velocity, density and pressure, the fraction of time that the interplanetary magnetic field (IMF) was southward, the IMF contribution of a solar wind-magnetosphere coupling function proposed by Boynton et al. (2011b), and the Dst index. As such, this study has deduced five new 1 h resolution models for the low-energy electrons measured by GOES (30-50 keV, 50-100 keV, 100-200 keV, 200-350 keV, and 350-600 keV) and extended the existing >800 keV and >2 MeV Geostationary Earth Orbit electron fluxes models to forecast at a 1 h resolution. All of these models were shown to provide accurate forecasts, with prediction efficiencies ranging between 66.9% and 82.3%.

Boynton, R. J.↗
NASA NTRS2008

Three-Dimensional Signatures of Intermittent Magnetic Reconnection in Global Simulations of Dayside Magnetosphere Dynamics

We performed high resolution global MHD simulations of THEMIS dayside crossings events in May -June 2007. We found that magnetopause surface is not in steady-state even during extended periods of steady solar wind conditions. The so-called tilted reconnection lines become unstable due to formation of pressure bubbles, strong core field flux tubes, vortices, and traveling magnetic field cavities. The topology of FTEs differ from that in two dimension cartoons representing obliquely oriented quasi-2D flux rope. The structure of FTE is changing at spatial scales of 1 -2 Re. Closely located space probes can observe completely different signatures. Branches of bent flux rope can move in opposite directions. THEMIS and Cluster observations are consistent with signatures predicted by simulations.

Kuznetsova, M.M.↗
NASA NTRS1995

Merged interaction regions and large-scale fluctuations observed by the Voyager 2 in the distant heliosphere

The merged interaction regions (MIRs) and large-scale fluctuations of the heliospheric magnetic field play a major role in the dynamics of the solar wind, the position and motion of the termination shock and heliopause, the triggering of radio emissions, and the modulation of cosmic rays. The structure of MIRs and large-scale fluctuations varies with distance from the sun and with solar activity. Here we compare Voyager 2 observations near the maximum of solar activity (1989 through 1991) with those during the declining phase of solar activity (1992 thorough 1994). Global MIRs with strong magnetic fields, preceded by a strong shock, were observed near solar maximum. During the declining phase of the solar cycle, the MIRs had significantly weaker magnetic fields. In both cases the pickup protons, identified by an analysis of pressure balanced structures, play a major role in the dynamical evolution of the MIRs beyond 30 AU. The large-scale magnetic field fluctuations have significantly greater amplitudes near solar maximum than during the declining phase of the solar cycle.

Burlaga, L. F.↗
DOE OSTI2024

Thermodynamic properties and enhancement of diamagnetism in nitrogen doped lutetium hydride synthesized at high pressure

Nitrogen doped lutetium hydride has drawn global attention in the pursuit of room-temperature superconductivity near ambient pressure and temperature. However, variable synthesis techniques and uncertainty surrounding nitrogen concentration have contributed to extensive debate within the scientific community about this material and its properties. We used a solid-state approach to synthesize nitrogen doped lutetium hydride at high pressure and temperature (HPT) and analyzed the residual starting materials to determine its nitrogen content. High temperature oxide melt solution calorimetry determined the formation enthalpy of LuH 1.96 N 0.02 (LHN) from LuH 2 and LuN to be −28.4 ± 11.4 kJ/mol. Magnetic measurements indicated diamagnetism which increased with nitrogen content. Ambient pressure conductivity measurements observed metallic behavior from 5 to 350 K, and the constant and parabolic magnetoresistance changed with increasing temperature. High pressure conductivity measurements revealed that LHN does not exhibit superconductivity up to 26.6 GPa. We compressed LHN in a diamond anvil cell to 13.7 GPa and measured the Raman signal at each step, with no evidence of any phase transition. Despite the absence of superconductivity, a color change from blue to purple to red was observed with increasing pressure. Thus, our findings confirm the thermodynamic stability of LHN, do not support superconductivity, and provide insights into the origins of its diamagnetism.

Science & Technology - Other Topics↗
DOE OSTI2022

Experimental observations of detached bow shock formation in the interaction of a laser-produced plasma with a magnetized obstacle

The magnetic field produced by planets with active dynamos, like the Earth, can exert sufficient pressure to oppose supersonic stellar wind plasmas, leading to the formation of a standing bow shock upstream of the magnetopause, or pressure-balance surface. Scaled laboratory experiments studying the interaction of an inflowing solar wind analog with a strong, external magnetic field are a promising new way to study magnetospheric physics and to complement existing models, although reaching regimes favorable for magnetized shock formation is experimentally challenging. This paper presents experimental evidence of the formation of a magnetized bow shock in the interaction of a supersonic, super-Alfvenic plasma with a strongly magnetized obstacle at the OMEGA laser facility. The solar wind analog is generated by the collision and subsequent expansion of two counterpropagating, laser-driven plasma plumes. The magnetized obstacle is a thin wire, driven with strong electrical currents. Hydrodynamic simulations using the FLASH code predict that the colliding plasma source meets the criteria for bow shock formation. Spatially resolved, optical Thomson scattering measures the electron number density, and optical emission lines provide a measurement of the plasma temperature, from which we infer the presence of a fast magnetosonic shock far upstream of the obstacle. Proton images provide a measure of large-scale features in the magnetic field topology, and reconstructed path-integrated magnetic field maps from these images suggest the formation of a bow shock upstream of the wire and as a transient magnetopause. Finally, we compare features in the reconstructed fields to two-dimensional MHD simulations of the system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Experimental observations of detached bow shock formation in the interaction of a laser-produced plasma with a magnetized obstacle

The magnetic field produced by planets with active dynamos, like the Earth, can exert sufficient pressure to oppose supersonic stellar wind plasmas, leading to the formation of a standing bow shock upstream of the magnetopause, or pressure-balance surface. Scaled laboratory experiments studying the interaction of an inflowing solar wind analog with a strong, external magnetic field are a promising new way to study magnetospheric physics and to complement existing models, although reaching regimes favorable for magnetized shock formation is experimentally challenging. This paper presents experimental evidence of the formation of a magnetized bow shock in the interaction of a supersonic, super-Alfvenic plasma with a strongly magnetized obstacle at the OMEGA laser facility. The solar wind analog is generated by the collision and subsequent expansion of two counter- propagating, laser-driven plasma plumes. The magnetized obstacle is a thin wire, driven with strong electrical currents. Hydrodynamic simulations using the FLASH code predict that the colliding plasma source meets the criteria for bow shock formation. Spatially resolved, optical Thomson scat- tering measures the electron number density, and optical emission lines provide a measurement of the plasma temperature, from which we infer the presence of a fast magnetosonic shock far upstream of the obstacle. Proton images provide a measure of large-scale features in the magnetic field topology, and reconstructed path-integrated magnetic field maps from these images suggest the formation of a bow shock upstream of the wire and as a transient magnetopause. We compare features in the reconstructed fields to two-dimensional MHD simulations of the system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗