Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Highly dense amorphous Nb{sub 2}O{sub 5} films with closed nanosized pores

This study is focused on tailoring the porosity of Nb{sub 2}O{sub 5} films during reactive pulsed magnetron sputtering. Dense amorphous films containing nanopores only in deeper regions have been grown at a high rate using substrate temperatures below 60 deg. C. The films exhibit a high refractive index, n{sub 400}=2.54, a low extinction coefficient, k{sub 400}{approx}6x10{sup -4}, a low mechanical stress (-90 MPa), and a negligible thermal shift. The specific depth distribution of the nanopores is believed to be the reason for the optimum trade-off between a high refractive index and low mechanical stress.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modification of magnetic properties and structure of Kr{sup +} ion-irradiated CrPt{sub 3} films for planar bit patterned media

30 keV Kr{sup +} ions were irradiated onto L1{sub 2} ordered CrPt{sub 3} (20 nm) alloy films fabricated by a magnetron sputtering deposition followed by an appropriate heat treatment, and the modification of the structure and magnetic properties of the CrPt{sub 3} films was investigated in detail. The fabricated L1{sub 2}CrPt{sub 3} (20 nm) onto a fused quartz substrate exhibited a quite large perpendicular anisotropy of 5x10{sup 6} ergs/cc, due to the large lattice distortion of 1%. The large perpendicular anisotropy decreased with increasing the ion dose, and became almost zero at the ion dose of 2x10{sup 14} ions/cm{sup 2} due to the loss of the magnetic order of CrPt{sub 3}. The suppression of the magnetic order of CrPt{sub 3} by the Kr{sup +} ion irradiation is attributed to the transformation of the structure from the L1{sub 2} phase to a disordered fcc phase, which was confirmed by x-ray diffraction analysis. Unlike the magnetization and perpendicular anisotropy, the anisotropy field of CrPt{sub 3} does not decrease significantly with the increase in the Kr{sup +} ion dose, and exhibited more than 20 kOe even at the ion dose of 1x10{sup 14} ions/cm{sup 2}. This is considered to be attributed that the lattice distortion of CrPt{sub 3} unchanged even at the Kr{sup +} ion dose of 2x10{sup 14} ions/cm{sup 2}.

36 MATERIALS SCIENCE↗

Ethanol gas sensitivity of carbon nanotip arrays/n-Si heterojunctions at room temperature

Carbon nanotip arrays were grown from silicon substrates via direct current magnetron sputtering at room temperature (RT). The simple carbon nanotip arrays/n-Si (C/Si) heterojunctions were used to detect ethanol gas at RT. The results show that the C/Si junctions have high ethanol gas sensitivity, rapid response, and high recovery speed at RT. Upon exposure to ethanol gas (0.64 g/l) at RT, the resistance of the junction decreases by 35% at a given positive voltage of 8 V. Moreover, the interface capacitance of the junction at 5 kHz can increase by about 40% rapidly when exposed to ethanol gas. The phenomena should be attributed to the change in the Fermi level of the carbon film caused by adsorbing electrons from ethanol molecules. The study shows that the C/Si junctions have potential application as ethanol gas sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The role of copper in ZnO/Cu/ZnO thin films for flexible electronics

ZnO/Cu/ZnO multilayer structures with very high conductivity have been obtained by magnetron sputtering. The Hall resistivity of the films was as low as 6.9x10{sup -5} OMEGA-cm with a carrier concentration of 1.2x10{sup 22} cm{sup -3} at the optimum copper layer thickness. The conduction mechanism has been explained in terms of metal to oxide carrier injection at low copper thickness and metal layer conduction at higher Cu thicknesses. The peak transmittance of the films is 88% and the photopic averaged transmittance is 75%. Optical transmission behavior of the films involves absorption by copper due to d-band to Fermi-surface transitions at short wavelengths and reflectance combined with scattering losses at long wavelengths. A Burstein-Moss shift in the band gap of the films is seen to take place with increase in thickness of the copper layer. The Haacke figure of merit has been calculated for the films with the best value being 8.7x10{sup -3} OMEGA{sup -1}. Pole figure results reveal that the copper midlayer acts as a hindrance to (002) ZnO texturing rather than as a seed layer. These results also confirm the mechanism of conduction. The results of the study assume further significance because annealing at 150 deg. C for up to 24 h in a reducing (Ar+5% H{sub 2}) ambient was found to have negligible effect on the properties of the films.

36 MATERIALS SCIENCE↗

Dynamic in situ observations of electrical and structural changes in thin thermoelectric (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films

Thin films of (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} were prepared by dc magnetron sputter deposition on different substrates. It is well known that thermal treatment of as-deposited p-type (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films leads to an enhancement of the power factor. Whereas up to now only the initial (as deposited) and the final (after annealing) film stages have been investigated, here, the dynamic changes of sputter-deposited film properties have been observed by in situ measurements. The enhancement of the power factor shows a significant dependence on thermal treatment. The best thermoelectric films have been prepared at a substrate temperature of 170 deg. C, with a power factor of 24.4 muW/(cm K{sup 2}). The changes in the Seebeck and Hall coefficients are caused by the enhancement in the Hall mobility after annealing. In situ x-ray diffractometry shows the generation of additional Te in dependence of the temperature. This is also confirmed by energy-dispersive x-ray microanalysis and the corresponding mapping in a scanning electron microscope. It is supposed that the locally well-defined Te enrichment is the reason for the improvement in the integral film transport properties.

36 MATERIALS SCIENCE↗

Chemical structure of the (Zn{sub 1-x},Mg{sub x})O/CuIn(S,Se){sub 2} interface in thin film solar cells

The formation of the interface between a magnetron sputtered (Zn{sub 1-x},Mg{sub x})O buffer layer and a CuIn(S,Se){sub 2} absorber in thin film solar cells has been investigated by x-ray photoelectron spectroscopy and x-ray induced Auger electron spectroscopy. Detailed analysis of the spectra shows the incorporation of Zn into the absorber surface in the initial stage of the deposition process forming ZnS and/or ZnSe bonds. As a result we find the buffer layer to be Zn-depleted near the interface.

36 MATERIALS SCIENCE↗

Selective liquid crystal molecule orientation on ion beam irradiated tantalum oxide ultrathin films

We recently achieved the homogeneous alignment of liquid crystal (LC) on amorphous Ta{sub 2}O{sub 5} layers. This study demonstrates that LC layers could be aligned either homogeneously or vertically by increasing the growth temperature of rf magnetron sputtering device and the irradiation time of the DuoPIGatron type Ar ion beam device causing uniform and dense plasma. We attained two LC orientations by observing Ta 4f and O 1s peak shifts with x-ray photoelectron spectroscopy. Moreover, the decreased thickness of layers with high-k dielectric constants helped to decrease driving LC voltages and in turn to achieve low power consumption.

36 MATERIALS SCIENCE↗

Double side electroluminescence from p-NiO/n-ZnO nanowire heterojunctions

Double side light emission devices based on p-NiO/n-ZnO nanowire heterojunctions have been fabricated on indium tin oxide substrate by radio frequency magnetron sputtering combined with hydrothermal process. According to the energy band alignment, the detected broad visible and narrow ultraviolet electroluminescence arise from defect and band edge transitions in ZnO nanowires, respectively. The unique property of the double side emission is due to the nature of the large band gap of NiO film. It provides a good opportunity for the emission of a light emitting device with different colors on the top and back sides, simultaneously.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Size and spatial homogeneity of SiGe quantum dots in amorphous silica matrix

In this paper, we present a study of structural properties of SiGe quantum dots formed in amorphous silica matrix by magnetron sputtering technique. We investigate deposition conditions leading to the formation of dense and uniformly sized quantum dots, distributed homogeneously in the matrix. X-ray and Raman spectroscopy were used to estimate the Si content. A detailed analysis based on grazing incidence small angle x-ray scattering revealed the influence of the deposition conditions on quantum dot sizes, size distributions, spatial arrangement, and concentration of quantum dots in the matrix, as well as the Si:Ge content.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adjustable resonance frequency and linewidth by Zr doping in Co thin films

Co{sub 100-x}Zr{sub x} (40 nm) thin films with different Zr compositions were grown on silicon substrates by radio frequency magnetron sputtering. The coercivity decreased with an increase in the Zr composition. A uniaxial anisotropy existed in the Co{sub 100-x}Zr{sub x} films, and the anisotropy field of the films decreased from 55 to 40 Oe with the increase of Zr composition. The resonance frequency and linewidth were decreased with the increase of the Zr composition during the permeability measurements. For samples with x=0 and 9, the magnetic anisotropy effective field and saturated field were obtained by fitting the external magnetic field dependent resonance frequency with Landau-Lifschitz-Gilbert equation. Therefore, it is an effective way to get the adjustable anisotropy field and linewidth, which is desirable for obtaining the high resonance and high permeability ferromagnetic film materials for high frequency application.

36 MATERIALS SCIENCE↗

Orientation dependence of ferroelectric behavior of BiFeO{sub 3} thin films

Multiferroic BiFeO{sub 3} (BFO) thin films with (111), (100), (110) preferred, and random orientations were deposited by radio frequency magnetron sputtering on SrRuO{sub 3}-buffered SrTiO{sub 3}(111), SrTiO{sub 3}(100), SrTiO{sub 3}(110), and Pt(111)/Ti/SiO{sub 2}/Si(100) substrates, respectively. The orientation dependences of ferroelectric and fatigue behavior of the BFO thin films were investigated. As expected, the (111)-oriented BFO thin film exhibits the highest, giant ferroelectric polarization (2P{sub r}=196.9 muC/cm{sup 2}) at 1 kHz and room temperature using positive up negative down measurement, while the (100)-oriented BFO thin film possesses an almost fatigue-free behavior up to 5.25x10{sup 7} switching cycles when measured at 100 kHz and room temperature. The observed behavior confirms that the largest spontaneous polarization direction and the fatigue endurance are (111) and (100) for BFO thin films, respectively. Regardless of the film orientation, the charge carriers that are responsible for dielectric relaxation and conductivity are oxygen vacancies (V{sub O}) .

36 MATERIALS SCIENCE↗

On the dynamic roughening transition in nanocomposite film growth

Surface roughness and dynamic growth behavior of TiC/a-C nanocomposite films deposited by nonreactive pulsed-dc (p-dc) magnetron sputtering were studied using atomic force microscopy, cross-sectional scanning, and transmission electron microscopy. From detailed analyses of surface morphology and growth conditions, it is concluded that a transition in growth mechanisms occurs, i.e., a mechanism dominated by geometric shadowing at a p-dc frequency of 100 kHz evolving to a surface diffusion mechanism driven by impact-induced atomistic downhill flow process by Ar{sup +} ions at a p-dc frequency of 350 kHz. It is shown that rapid smoothening of initially rough surfaces with rms roughness from {approx}6 to <1 nm can be effectively achieved with p-dc sputtering at 350 kHz pulse frequency, leading to a transition from a strong columnar to a columnar-free microstructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth of (001)-oriented Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films on a-plane sapphire with an MgO/ZnO bridge layer

High quality (001)-oriented Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} (BST) thin films have been grown on a-plane sapphire (1120) by rf magnetron sputtering using a double bridge layer consisting of (0001)-oriented ZnO (50 nm) and (001)-oriented MgO (10 nm) prepared by plasma-assisted molecular beam epitaxy. X-ray diffraction revealed the formation of three sets of in-plane BST domains, offset from one another by 30 deg., which is consistent with the in-plane symmetry of the MgO layer observed by in situ reflective high electron energy diffraction. The in-plane epitaxial relationship of BST, MgO, and ZnO has been determined to be BST [110]//MgO [110]//ZnO [1120] and BST [110]/MgO [110]//ZnO [1100]. Capacitance-voltage measurements performed on BST coplanar interdigitated capacitor structures revealed a high dielectric tunability of up to 84% at 1 MHz.

36 MATERIALS SCIENCE↗

Electric-field tuning of the metal-insulator transition in ultrathin films of LaNiO{sub 3}

Epitaxial ultrathin films of the metallic perovskite LaNiO{sub 3} were grown on (001) SrTiO{sub 3} substrates using off-axis rf magnetron sputtering. The film structure was characterized and their electrical properties investigated. Films thinner than 8 unit cells display a metal-insulator transition at a thickness dependent characteristic temperature. Hall measurements revealed p-type conduction, which was confirmed by electric field-effect experiments. Large changes in the transport properties and the metal-insulator transition temperature were observed for the thinnest LaNiO{sub 3} films as the carrier density was electrostatically tuned.

36 MATERIALS SCIENCE↗

Amorphous silicon as electron transport layer for colloidal semiconductor nanocrystals light emitting diode

We demonstrate the fabrication of light-emitting diodes (LEDs) made from all-inorganic colloidal semiconducting nanocrystals (NCs). The diode utilizes a sandwich structure formed by placing CdSe/CdS NCs between two layers of Si and Ag{sub x}O, which act as electron- and hole-transporting materials, respectively. The photoluminescence properties of NCs are rendered less dependent upon surface chemistry and chemical environment by growing a thick CdS shell. It also enhances stability of the NCs during the process of magnetron sputtering for silicon deposition. The resulting LED device exhibits a low turn-on voltage of 2.5 V and the maximum external quantum efficiency of nearly 0.08%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modulating microstructure and magnetic properties of BaFe{sub 12}O{sub 19} thin films by using Pt and yttria stabilized zirconia underlayers

The c-axis oriented barium ferrite thin films were prepared by radio frequency magnetron sputtering on silicon substrates with a metal underlayer Pt (111) as well as an oxide underlayer yttria stabilized zirconia (YSZ). Microstructural studies (scanning electron microscopy, atomic force microscopy, and magnetic force microscopy) showed that the magnetic grains in BaM film have a strong relationship with the grains in the underlayer. The Pt underlayer is more effective in forming micrometer-sized and multidomain magnetic grains, which have high saturation magnetization but small coercivity and remanence of the BaM film. On the contrary, the YSZ underlayer is favorable to obtain nanometer-sized and monodomain magnetic grains, which lead to a slight decrease in saturation magnetization but dramatically increase coercivity and remanence of the BaM film. Hence, with careful selection of underlayer, it is feasible to obtain suitable magnetic grain size and domain structure of BaM films to satisfy special requirements.

36 MATERIALS SCIENCE↗

Magnetic properties of graded A1/L1{sub 0} films obtained by heat treatment of FePt/CoPt multilayers

Structurally gradient layered A1/L1{sub 0} films are obtained by heat treatment of magnetron sputter deposited FePt(20 nm)/CoPt(x nm) bilayers where x=0-120 nm. The magnetic properties can be tuned by adjustment of the layer thicknesses and taking advantage of the different heat-treatment temperatures required for the ordering of the L1{sub 0} phase between FePt and CoPt.

36 MATERIALS SCIENCE↗

Highly efficient blue organic light emitting device using indium-free transparent anode Ga:ZnO with scalability for large area coating

The availability of economically-produced and environmentally-stable transparent conductive oxide (TCO) coatings is critical for the development of a variety of electronic devices requiring transparent electrodes. Such devices include liquid crystal display pixels and organic light emitting diodes (OLEDs),[1, 2] solar cell applications,[3, 4] and electrically heated windows.[5, 6] The materials fulfilling these requirements are usually wide band gap inorganic transparent conductive oxides (TCOs). Tin-doped indium oxide, or ITO, has traditionally been used for electronic TCO applications because of its low resistivity, high work function and transparency. Due to the increasing cost and limited supply of indium and its tendency to migrate in to the device, there has been increasing research interest to substitute ITO with an indium-free material. A number of alternative metal oxides and doped oxides have been evaluated as TCO materials with varying degrees of success.[7, 8] Among these alternatives to ITO, gallium-doped zinc oxide (GZO) [2, 9] and aluminium-doped zinc oxide (AZO) [10, 11] have drawn particular attention. These materials have been demonstrated to have resistivities and transparencies approaching those of the best ITO, low toxicity, and much lower materials cost. Although AZO is attractive as a TCO electrode material, GZO features a greater resistance to oxidation as a result of gallium’s greater electronegativity compared to Submitted to 2 aluminum.[12, 13

14 SOLAR ENERGY↗