Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Universal orbital and magnetic structures in infinite-layer nickelates

We conducted a comparative study of the rare-earth infinite-layer nickelate films, RNiO 2 (R = La, Pr, and Nd), using resonant inelastic x-ray scattering (RIXS). We found that the gross features of the orbital configurations are essentially the same, with minor variations in the detailed hybridization. For low-energy excitations, we unambiguously confirm the presence of damped magnetic excitations in all three compounds. By fitting to a linear spin-wave theory, comparable spin exchange coupling strengths and damping coefficients are extracted, indicating a universal magnetic structure in the infinite-layer nickelates. Interestingly, while signatures of a charge order are observed in LaNiO 2 in the quasielastic region of the RIXS spectrum, it is absent in NdNiO 2 and PrNiO 2 . Furthermore, this prompts further investigation into the universality and the origins of charge order within the infinite-layer nickelates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Optical Properties of Multilayer BaTiO{sub 3}/SiO{sub 2} Film Structures Formed by the Sol–Gel Method

Multi-layer film structures BaTiO{sub 3}/SiO{sub 2} with a thickness of ~1 μm containing up to 14 pairs of layers were synthesized by the sol–gel method with sequential heat treatment. It is shown that the synthesized structures are X-ray amorphous. The formation of bands in the transmission and reflection spectra caused by interference effects is demonstrated. A more regular structure exhibits a photon band gap (opacity band) in the visible range with main minimum at 636 nm and corresponding maximum in the reflection spectra. Dispersion characteristics of barium titanate films with different concentrations of initial sols were studied and an increase in the refractive index with an increase in the concentration of sol was demonstrated. For a sol with a concentration of 60 mg/mL, the refractive index in the spectral range of 390–1600 nm is 1.88–1.81. The prospects of sol–gel technology for the formation of BaTiO{sub 3}/SiO{sub 2} structures for nanophotonics and solar radiation converters are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Renewable energy integration and system operation challenge: control and optimization of millions of devices

The electric power infrastructure, originally designed and built on large-scale power plants, is evolving into a more resilient power generation and delivery system in which millions of smaller units of distributed energy generation resources units will be installed in sub-transmission and distribution networks. In order to control, manage and optimize the future grid, a hierarchical design is presented in this chapter which enables the distributed control on grid edge while inheriting the existing centralized control structure. This layered design of large-scale power system operation and control uses the following principle: reactive power control is treated as a primary control for voltage stability, and the real power control is primarily a grid-level control but can also be a supplementary control for voltage support in the case of insufficient reactive power control capacity. For the purpose of active control and operation at the distribution level, a recursive power network model is derived from nodal injection and branch power flow models. Based on the model, the proposed algorithms of hierarchical control, grid-edge inference and dynamic hosting allowance are developed and presented for multi-level controlled operation. And, a co-simulation architecture of integrated T&D system is presented to validate and demonstrate the feasibility and scalability of proposed algorithms.

Xu, Ying↗
DOE OSTI2022

Native lattice strain induced structural earthquake in sodium layered oxide cathodes

Abstract High-voltage operation is essential for the energy and power densities of battery cathode materials, but its stabilization remains a universal challenge. To date, the degradation origin has been mostly attributed to cycling-initiated structural deformation while the effect of native crystallographic defects induced during the sophisticated synthesis process has been significantly overlooked. Here, using in situ synchrotron X-ray probes and advanced transmission electron microscopy to probe the solid-state synthesis and charge/discharge process of sodium layered oxide cathodes, we reveal that quenching-induced native lattice strain plays an overwhelming role in the catastrophic capacity degradation of sodium layered cathodes, which runs counter to conventional perception—phase transition and cathode interfacial reactions. We observe that the spontaneous relaxation of native lattice strain is responsible for the structural earthquake (e.g., dislocation, stacking faults and fragmentation) of sodium layered cathodes during cycling, which is unexpectedly not regulated by the voltage window but is strongly coupled with charge/discharge temperature and rate. Our findings resolve the controversial understanding on the degradation origin of cathode materials and highlight the importance of eliminating intrinsic crystallographic defects to guarantee superior cycling stability at high voltages.

25 ENERGY STORAGE↗
NASA NTRS1984

Chip level modeling of LSI devices

The advent of Very Large Scale Integration (VLSI) technology has rendered the gate level model impractical for many simulation activities critical to the design automation process. As an alternative, an approach to the modeling of VLSI devices at the chip level is described, including the specification of modeling language constructs important to the modeling process. A model structure is presented in which models of the LSI devices are constructed as single entities. The modeling structure is two layered. The functional layer in this structure is used to model the input/output response of the LSI chip. A second layer, the fault mapping layer, is added, if fault simulations are required, in order to map the effects of hardware faults onto the functional layer. Modeling examples for each layer are presented. Fault modeling at the chip level is described. Approaches to realistic functional fault selection and defining fault coverage for functional faults are given. Application of the modeling techniques to single chip and bit slice microprocessors is discussed.

Armstrong, J. R.↗
DOE OSTI2025

Structure, dynamics, and electrochemistry of choline chloride/ethylene glycol eutectic solvents at an electrode surface explored by molecular dynamics simulations

Choline chloride and ethylene glycol mixtures with 1:2, 1:4, and 1:6 molar ratios on the surfaces of graphite and gold electrodes were studied using classical molecular dynamics simulations. Both neutral and charged electrodes were considered. The liquid composition, solvation structure, molecular orientation, and dynamics at the electrode surface are significantly different from those of the bulk liquid. These properties strongly depend on the electrode material and charge density, whereas they are less sensitive to the overall solvent composition. The effect of the electrode on the composition, structure, and orientation of the liquid fades beyond ∼10 Å from the surface of the electrode. This distance corresponds to about two layers of the structured solvent, despite the fact that the layered structure extends to at least five layers or about 25 Å. However, the electrode influences solvent dynamics over a longer distance. The electrochemical properties of the eutectic solvent at both electrode surfaces were also studied. The simulations captured the experimental differential capacitance shapes for both electrode systems, although the magnitudes and exact shapes differ. The simulations further revealed that the solvent in the first solvation layer can both overscreen and underscreen the electrode charges depending on the electrode material and electrode potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Interply layer degradation effects on composite structural response

Recent research activities at NASA Lewis Research Center to computationally evaluate the effects of interply layer progressive weakening (degradation) on the structural response of a composite beam are summarized. The structural responses of interest include: (1) bending, (2) buckling, (3) free vibrations, (4) periodic excitation, and (5) impact. Finite element analysis was used for the computational evaluations. The interply layer degradation effects on the various structural responses were determined and assessed as a function of the interply layer modulus varying from 1 million psi down to 1000 psi and even lower for some limiting cases. The results obtained show that the interply layer degradation has generally negligible effects on composite structural response and, therefore, structural integrity, unless the interply layer modulus degrades to about 10,000 psi or less.

Chamis, C. C.↗
NASA NTRS1984

Interply layer degradation effects on composite structural response

Recent research activities at NASA Lewis Research Center to computationally evaluate the effects of interply layer progressive weakening (degradation) on the structural response of a composite beam are summarized. The structural responses of interest include: (1) bending, (2) buckling, (3) free vibrations, (4) periodic excitation, and (5) impact. Finite element analysis was used for the computational evaluations. The interply layer degradation effects on the various structural responses were determined and assessed as a function of the interply layer modulus varying from 1 million psi down to 1000 psi and even lower for some limiting cases. The results obtained show that the interply layer degradation has generally negligible effectss on composite structural response and, therefore, structural integrity, unless the interply layer modulus degrades to about 10,000 psi or less.

Chamis, C. C.↗
DOE OSTI2017

Electronic structure of single-layer superlattices (GeC){sub 1}(SiC){sub 1}, (SnC){sub 1}(SiC){sub 1}, and (SnC){sub 1}(GeC){sub 1}

The crystal and electronic structures of GeC, SiC, and SnC crystals and superlattices based on them, GeC/SiC, SnC/SiC, and SnC/GeC, are modeled within density functional theory. The equilibrium lattice constants are obtained, the band spectra and densities of states are calculated, and the specific features of the formation of the valence band and chemical bonding in these crystals and superlattices are studied.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Structural origins of broadband emission from layered Pb–Br hybrid perovskites

Through structural and optical studies of a series of two-dimensional hybrid perovskites, we show that broadband emission upon near-ultraviolet excitation is common to (001) lead-bromide perovskites. Importantly, we find that the relative intensity of the broad emission correlates with increasing out-of-plane distortion of the Pb–(μ-Br)–Pb angle in the inorganic sheets. Temperature- and power-dependent photoluminescence data obtained on a representative (001) perovskite support an intrinsic origin to the broad emission from the bulk material, where photogenerated carriers cause excited-state lattice distortions mediated through electron–lattice coupling. In contrast, most inorganic phosphors contain extrinsic emissive dopants or emissive surface sites. The design rules established here could allow us to systematically optimize white-light emission from layered hybrid perovskites by fine-tuning the bulk crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Influence of Annealing in Freon on the Crystalline Structure of Cadmium-Telluride Layers and the Efficiency of Thin-Film Solar Cells on Their Basis

Solar cells (SCs) based on cadmium-telluride base layers, obtained by thermal evaporation and closed-space sublimation (CSS), are investigated. The base layers are activated via annealing in Freon. Structural and morphological studies are carried out to compare the recrystallization processes occurring during annealing in CdTе layers fabricated by different methods. The output parameters and light diode characteristics of the SCs are investigated, and the possibility of applying Freon annealing in the commercial production technology of thin-film CdS/CdTе SCs with base layers formed by thermal vacuum evaporation is analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1973

The turbulence structure in the plane two-stream mixing layer.

Experimental data on the turbulent structure of free shear layers is examined in incompressible air streams. Both single-point and two-point data are used to examine the large coherent structure of the mixing layer. The use of spatial scales to define this large structure is explored. Application of these scales to modeling of free shear layers to show the similarity of such flows is demonstrated. Comparison of the statistical structure with observations from shadowgraph displays of plane shear layer flows shows good qualitative and quantitative agreement.

Jones, B. G.↗
NASA NTRS1996

On the Coupling Between a Supersonic Turbulent Boundary Layer and a Flexible Structure

A mathematical model and a computer code have been developed to fully couple the vibration of an aircraft fuselage panel to the surrounding flow field, turbulent boundary layer and acoustic fluid. The turbulent boundary layer model is derived using a triple decomposition of the flow variables and applying a conditional averaging to the resulting equations. Linearized panel and acoustic equations are used. Results from this model are in good agreement with existing experimental and numerical data. It is shown that in the supersonic regime, full coupling of the flexible panel leads to lower response and radiation from the panel. This is believed to be due to an increase in acoustic damping on the panel in this regime. Increasing the Mach number increases the acoustic damping, which is in agreement with earlier work.

Frendi, Abdelkader↗
DOE OSTI2018

Extended Electronic Structure Inhomogeneity Created by Double Chain Layer Defects Surrounding Columnar Tracks in Heavy-Ion Irradiated YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}.

In YBa2Cu3O7-delta (YBCO), heavy-ion irradiation creates continuous amorphous tracks that are highly effective for vortex pinning. However, the electronic structure landscape of defects and consequently their vortex pinning roles are unclear. Here, we show double chain layer (DCL) defects which intersect the columnar tracks are additionally produced by high energy Pb ion irradiation in YBCO. The DCL defects are similar to 29 nm long, about three times the columnar defect diameter. The electronic structures of the DCL and columnar track defects were determined using atomic-resolution scanning transmission electron microscopy (STEM) and high resolution electron energy loss spectroscopy (EELS). Results show a decrease in the oxygen and copper content at the interface between the track and the YBCO matrix, resulting in interfacial strain. For the DCL defects, the STEM/EELS study revealed a localized electron doped CuO2 plane next to the DCL defect. The DCL defects thus further extend the electronic inhomogeneity into YBCO.

critical current↗
DOE OSTI2022

Elucidating the Atomic Structures of the Gel Layer Formed during Aluminoborosilicate Glass Dissolution: An Integrated Experimental and Simulation Study

The altered glasses produced during aqueous dissolution of silicate and borosilicate glasses are among the most complex structures to understand at the atomic level due to their amorphous nature, random porosity and various levels of hydration. In this study, we gained insights of the complex atomic structures of altered aluminoborosilicate glasses by combining a range of experimental and computational approaches. The altered glasses were prepared by dissolution of three glasses with varying level of alumina in acid for 7 days. A comprehensive set of experimental [elemental analysis, high-energy X-ray diffraction, 29 Si and 27 Al solid-state nuclear magnetic resonance (NMR), and O 1s X-ray photoelectron spectroscopy (XPS)] and modeling (molecular dynamics (MD) simulations using non-reactive and reactive force fields) were used to study the atomic structures of these altered glasses. Elemental analysis showed that most of the B in the pristine glasses was leached into the solution and was not contained in the altered glass. The 29 Si and 27 Al solid-state NMR spectra revealed that the altered glasses have more polymerized silicate network as compared to those in the pristine glasses due to the reformation of linkages among Si and Al oxygen polyhedral in the altered glasses. The bridging and non-bridging (or hydroxyl O) atoms in the altered glasses were also quantified from their O 1s XPS spectra. Atomic structure models of the altered glasses were constructed by using MD simulations using the reactive force field based on the compositional information obtained from experiments. Various pore structures were generated using the charge-scaling (CS) method by using different initial densities and CS temperatures; the best CS parameters of each alternated glass were then determined by comparing with the experimental structure factors obtained from high energy X-ray diffraction. Pore and the atomic structures and vibrational properties around these pore surfaces were analyzed. Furthermore, these results from this comprehensive study thus provides a realistic insight into the pore morphology, atomic structure, and vibrational properties of altered glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗