Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “L REACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Interpretation of experimental data on safety parameters from standpoint of mathematical nuclear reactor theory

The paper deals with the problem of correct processing of experimental information for unambiguous determination of current reactivity value. The methodology for reactivity determination that is based on spectral decomposition of the solution obtained for non-stationary equation of neutron transport is presented. The proposed spectral projection algorithm takes into consideration the effects related with space-time re-distribution of neutron field and thus excludes the main systematic error and increases accuracy of current reactivity values. The paper presents the results of model calculations, demonstrating the effectiveness of the proposed method. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Evaluation of the Dissolution Behavior of L-Bundle End Caps and HFIR Fuel Carriers

The H-Canyon facility is currently using the 6.1D dissolver for the dissolution of Material Test Reactor (MTR) fuel and the 6.4D dissolver for the dissolution of High Flux Isotope Reactor (HFIR) fuel using mercury-catalyzed HNO₃ dissolution flowsheets. The processing strategy for both dissolvers involves the dissolution of multiple charges of fuel per batch. After the designated heating cycle, the dissolvers are opened, and the charging wells are probed to determine if the MTR or HFIR fuel has dissolved. If undissolved fuel fragments are beyond a certain height, the dissolver must be closed and heated for an additional amount of time to dissolve the remaining material. In recent MTR fuel dissolutions, “high probes” (i.e., excessive undissolved material) were frequently observed, which resulted in extended dissolution times. The suspected cause of the high probes was the incomplete dissolution of the L-Bundle End Cap, rather than the fuel or fuel bundles. The End Cap is hypothesized to be binding in the insert well and not dropping into the acid as the L-Bundle and fuel dissolve. Once the End Cap is dislodged by the probe and drops into the acid, the dissolution rate of the End Cap appears to be significantly reduced compared to the dissolution rate of the fuel and other parts of the L-Bundle. A similar issue has also been observed with the lifting bail on the HFIR fuel carriers. During HFIR fuel dissolutions, the lifting bail on the outer carrier has resulted in high probes due to incomplete dissolution. In one case, a partially dissolved bail was caught in one of the insert well holes which prevented the probe from going to the bottom of the well.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhanced Micro-Pocket Fission Detector for High Temperature Reactors - FY17 FInal Project Report

A collaboration between the Idaho National Laboratory (INL), the Kansas State University (KSU), and the French Atomic Energy Agency, Commissariat à l'Énergie Atomique et aux Energies Alternatives, (CEA), has been initiated by the Nuclear Energy Enabling Technologies (NEET) Advanced Sensors and Instrumentation (ASI) program for developing and testing High Temperature Micro-Pocket Fission Detectors (HT MPFD), which are compact fission chambers capable of simultaneously measuring thermal neutron flux, fast neutron flux and temperature within a single package for temperatures up to 800 °C. The MPFD technology utilizes a small, multi-purpose, robust, in-core fission chambers and thermocouple. As discussed within this report, the small size, variable sensitivity, and increased accuracy of the MPFD technology represent a revolutionary improvement over current methods used to support irradiations in US Material Test Reactors (MTRs). Previous research conducted through NEET ASI1-3 has shown that the MPFD technology could be made robust and was successfully tested in a reactor core. This new project will further the MPFD technology for higher temperature regimes and other reactor applications by developing a HT MPFD suitable for temperatures up to 800 °C. This report summarizes the research progress for this three year project.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance evaluation of a completely stirred anaerobic reactor treating pig manure at a low range of mesophilic conditions

Highlights: • The biogas process can run stably at 20 °C at extremely low OLR after long-term acclimation of bacteria. • A biogas plant running at 28 °C seems as efficient as that operated at 38 °C at low OLR of 1.3 g ODM L{sup −1} d{sup −1}. • Lower temperature operation is inadvisable for the commercial biogas plant running at rather high OLR. • The estimated sludge yield at 28 °C is higher than that at 38 °C. - Abstract: Many Chinese biogas plants run in the lower range of mesophilic conditions. This study evaluated the performance of a completely stirred anaerobic reactor treating pig manure at different temperatures (20, 28 and 38 °C). The start-up phase of the reactor at 20 °C was very long and extremely poor performance was observed with increasing organic loading rate (OLR). At an OLR of 4.3 g ODM L{sup −1} d{sup −1}, methane production at 28 °C was comparable (3% less) with that at 38 °C, but the risk of acidification was high at 28 °C. At low OLR (1.3 g ODM L{sup −1} d{sup −1}), the biogas process appeared stable at 28 °C and gave same methane yields as compared to the reactor operating at 38 °C. The estimated sludge yield at 28 °C was 0.065 g VSS g{sup −1} COD{sub removed,} which was higher than that at 38 °C (0.016 g VSS g{sup −1} COD{sub removed})

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In-Pile Experiment of a New Hafnium Aluminide Composite Material to Enable Fast Neutron Testing in the Advanced Test Reactor

A new hafnium aluminide composite material is being developed as a key component in a Boosted Fast Flux Loop (BFFL) system designed to provide fast neutron flux test capability in the Advanced Test Reactor. An absorber block comprised of hafnium aluminide (Al3Hf) particles (~23% by volume) dispersed in an aluminum matrix can absorb thermal neutrons and transfer heat from the experiment to pressurized water cooling channels. However, the thermophysical properties, such as thermal conductivity, of this material and the effect of irradiation are not known. This paper describes the design of an in-pile experiment to obtain such data to enable design and optimization of the BFFL neutron filter.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Numerical Simulation of Twin Jets using LES with the Nek5000 Code

The twin jet activity, a joint effort between Texas A and M University, University of Tennessee - Knoxville, and Argonne National Laboratory, is being used to analyze the performance of various computational fluid dynamics (CFD) code packages. The twin jet water facility (TJWF) is based off a semi-classical problem of combining planar turbulent jets in a large free-shear environment or enclosure. The problem is similar to physics seen in advanced reactor designs such as in the large upper plena of a sodium fast reactor. Utilizing the experimental data sets created using laser Doppler velocimetry (LDV) and particle image velocimetry (PIV), the Nek5000 code, among others, is qualitatively compared to the experimental work. This effort is a starting point for determining the appropriate simulation techniques needed for resolving the twin jet physics.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of the multigroup cross section library for the CASL neutronics simulator MPACT: Method and procedure

The MPACT neutronics module of the Consortium for Advanced Simulation of Light Water Reactors (CASL) core simulator is a 3D whole core transport code being developed for the CASL toolset known as the Virtual Environment for Reactor Analysis (VERA). Key characteristics of the MPACT code include a subgroup method for resonance self-shielding and a whole-core transport solver with a 2D/1D synthesis method. The AMPX and SCALE code packages have been significantly improved to include intermediate resonance parameters, as well as new modules to enhance the accuracy of resonance data and scattering matrices for the Bondarenko approach and transport cross sections of hydrogen. In addition, CASL XSTools have been developed to generate the MPACT multigroup cross section library. A simple super-homogenization method for 238U has been developed to resolve reaction rate discrepancy issues caused by angle-dependent total cross sections, poor scattering matrices, and a poor resonance interference model at coarse group structure. Here, due to the limitation of computing capacity that can occur even in high performance computing, a new 51-group structure has been developed for efficient simulation that is applicable for both pressurized water reactor (PWR) and boiling water reactor (BWR) simulations. A new ENDF/B-VII.1 MPACT 51-group library has been developed using the AMPX/SCALE and XSTools code packages, and it has been verified and validated by performing various benchmark calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Measurement of prompt neutron generation time at the VIR-2M pulsed nuclear reactor

The prompt neutron generation time is measured in the core of the VIR-2M research nuclear reactor. The measurements are performed using the Babala method while the reactor is in the subcritical state. The VIR-2M reactor and the relevant experimental equipment are briefly described, and the experimental procedure and data processing technique are presented. It is shown that the prompt neutron generation time with empty experimental channels is 35 ± 1 μs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Lithium wall conditioning and surface dust detection on NSTX, and dust removal

Lithium evaporation onto National Spherical Torus Experiment (NSTX) plasma-facing components (PFCs) has resulted in improved energy confinement, and reductions in the number and amplitude of edge-localized modes (ELMs) up to the point of complete ELM suppression. The associated PFC surface chemistry has been investigated with a novel plasma-material interface probe connected to an in-vacuo surface analysis station. Analysis has demonstrated that the binding of D atoms to the polycrystalline graphite material of PFCs is fundamentally changed by lithium-in particular, deuterium atoms become weakly bonded near lithium atoms themselves bound to either oxygen or the carbon from the underlying material. Surface dust inside NSTX has been detected in real time using a highly sensitive electrostatic dust detector. In a separate experiment, electrostatic removal of dust via three concentric spiral-shaped electrodes covered by a dielectric and driven by a high-voltage three-phase waveform was evaluated for its potential application to fusion reactors.

36 MATERIALS SCIENCE↗

Material Interactions in Severe Accidents – Benchmarking the MELCOR V2.2 Eutectics Model for a BWR-3 MARK-I Station Blackout: Part I – Single Case Analysis

Here in this analysis, the two material interaction models available in the MELCOR code are benchmarked for a severe accident at a BWR under representative Fukushima Daiichi boundary conditions. This part of the benchmark investigates the impact of each material interaction model on accident progression through a detailed single case analysis. It is found that the eutectics model simulation exhibits more rapid accident progression for the duration of the accident. The slower accident progression exhibited by the interactive materials model simulation, however, allows for a greater degree of core material oxidation and hydrogen generation to occur, as well as elevated core temperatures during the ex-vessel accident phase. The eutectics model simulation exhibits more significant degradation of core components during the late in-vessel accident phase – more debris forms and relocates to the lower plenum before lower head failure. The larger debris bed observed in the eutectics model simulation also reaches higher temperatures, presenting a more significant thermal challenge to the lower head until its failure. At the end of the simulated accident scenario, however, core damage is comparable between both simulations due to significant core degradation that occurs during the ex-vessel phase in the interactive materials model simulation. A key difference between the two models’ performance is the maximum temperatures that can be reached in the core and therefore the maximum ΔT between any two components. When implementing the interactive materials model, users have the option to modify the liquefaction temperature of the ZrO 2 -interactive and UO 2 -interactive materials as a way to mimic early fuel rod failure due to material interactions. Through modification of the liquefaction of high melting point materials with significant mass, users may inadvertently limit maximum core temperatures for fuel, cladding, and debris components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Mesophilic and thermophilic anaerobic biodegradability of water hyacinth pre-treated at 80 {sup o}C

Water hyacinth (Eichornia crassipes) is a fast growing aquatic plant which causes environmental problems in continental water bodies. Harvesting and handling this plant becomes an issue, and focus has been put on the research of treatment alternatives. Amongst others, energy production through biomethanation has been proposed. The aim of this study was to assess the anaerobic biodegradability of water hyacinth under mesophilic and thermophilic conditions. The effect of a thermal sludge pre-treatment at 80 {sup o}C was also evaluated. To this end, anaerobic biodegradability tests were carried out at 35 {sup o}C and 55 {sup o}C, with raw and pre-treated water hyacinth. According to the results, the thermal pre-treatment enhanced the solubilisation of water hyacinth (i.e. increase in the soluble to total chemical oxygen demand (COD)) from 4% to 12% after 30 min. However, no significant effect was observed on the methane yields (150-190 L CH{sub 4}/kg volatile solids). Initial methane production rates for thermophilic treatments were two fold those of mesophilic ones (6-6.5 L vs. 3-3.5 L CH{sub 4}/kg COD.day). Thus, higher methane production rates might be expected from thermophilic reactors working at short retention times. The study of longer low temperature pre-treatments or pre-treatments at elevated temperatures coupled to thermophilic reactors should be considered in the future.

54 ENVIRONMENTAL SCIENCES↗

Confinement improvement by fluctuating input power

An interesting effect of the fluctuating input power on plasma confinement is reported. Specifically, the addition of the sinusoidal perturbation, Asin(wt), to constant power q{sub 0} is shown to promote the confinement, leading to the L-H transition at a lower value of q{sub 0}, as compared to the case of constant q{sub 0} without the sinusoidal perturbation. In general, higher amplitude (A) and lower frequency (w) are found to be more favorable for the L-H transition while an interesting linear relation between A and w leading to the L-H transition is established for different values of q{sub 0}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress and present status of ITER cryoline system

The cryoline system at ITER forms a very complex network localized inside the Tokamak building, on a dedicated plant bridge and in cryoplant areas. The cooling power produced in the cryoplant is distributed via these lines with a total length of about 3.7 km and interconnecting all the cold boxes of the cryogenic system as well as the cold boxes of various clients (magnets, cryopumps and thermal shield). Distinct layouts and polygonal geometry, nuclear safety and confinement requirements, difficult installation and in-service inspection/repair demand very high reliability and availability for the cryolines. The finalization of the building-embedded plates for supporting the lines, before the detailed design, has made this project technologically more challenging. The conceptual design phase has been completed and procurement arrangements have been signed with India, responsible for providing the system of cryolines and warm lines to ITER, as in kind contribution. The prototype test for the design and performance validation has been planned on a representative cryoline section. After describing the basic features and general layout of the ITER cryolines, the paper presents key design requirements, conceptual design approach, progress and status of the cryolines project as well as challenges to build such a complex cryoline system.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Simulation of site and topographic effects on ground motion in Los Alamos, NM mesas

Mesas, which consist of an elevated area of land with a flat top and steep cliffs at the sides, are one of the common geological formations present in the Los Alamos region. Previous research has shown that geological formations such as sedimentary canyons can amplify soil response during earthquakes. There have also been parametric studies to understand the response of an idealized and isolated mountain/canyon under inclined plane waves. In this study, a 2-D linear anelastic soil domain, with topography modelled after the Los Alamos region with many mesas and canyons, is considered to understand site-specific topographic effects in the presence of non-isolated topographical features. Various earthquake sources configurations ranging from point sources to finite faults with varying rupture length, dip angles and spatial slip distributions are considered. To isolate the effect of topography, three other soil domains—a homogeneous half-space, homogeneous half-space with mesas and canyons, and a computational domain with just the soil properties from the Los Alamos region on a flat soil domain is also considered. 2-D site-response analyses of these soil domains under earthquake excitation show that the free-field response of the soil can be amplified or de-amplified depending on the topography of the region and the location of the station relative to the fault. These studies also show that even relatively small mesas with height less than 100 m can significantly amplify the response (by a factor of 2 or more), which differ from the much smaller amplification factors (≤1.2) specified by standard building codes such as Eurocode-8 (2000) for topographical features with a similar slope. De-amplifications are also fairly common, especially close to the canyons. The results from this study agree qualitatively with those from the ambient vibration study conducted by Stolte et al. on a mesa from the Los Alamos region. Furthermore, such site-specific studies provide important insights into the variability of the topographic amplification factors within a region of interest. Such knowledge is important in the design of safety-related critical infrastructure located within that region.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

On-line measurement of gaseous iodine species during a PWR severe accident

A long-range remote sensing of severe accidents in nuclear power plants can be obtained by monitoring the online emission of volatile fission products such as xenon, krypton, caesium and iodine. The nuclear accident in Fukushima was ranked at level 7 of the International Nuclear Event Scale by the NISA (Nuclear and Industrial Safety Agency) according to the importance of the radionuclide release and the off-site impact. Among volatile fission products, iodine species are of high concern, since they can be released under aerosols as well as gaseous forms. Four years after the Fukushima accident, the aerosol/gaseous partition is still not clear. Since the iodine gaseous forms are less efficiently trapped by the Filtered Containment Venting Systems than aerosol forms, it is of crucial importance to monitor them on-line during a nuclear accident, in order to improve the source term assessment in such a situation. Therefore, we propose to detect and quantify these iodine gaseous forms by the use of highly sensitive optical methods. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗