Launch booster gust alleviation.
Controller design for booster gust alleviation, considering stochastic minimization problem solved by iteration yielding linear finite time controller with time-varying gains
ROCKET BOOSTER↗
SEARCH · Engineering Papers
Results for “ITER design”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Upper-surface blowing nacelle design study for a swept wing airplane at cruise conditions
A study was made to design two types of overwing nacelles for an existing wing-body at a design condition of Mach = 0.8 and C sub L = 0.2. Internal and external surface contours were developed for nacelles having either a D-shaped nozzle or a high-aspect-ratio nozzle for upper-surface blowing in the powered-lift mode of operation. The goal of the design was the development of external nacelle lines that would minimize high-speed aerodynamic interference effects. Each nacelle type was designed for both two- and four-engine airplanes using an iterative process of aerodynamic potential flow analysis. Incremental nacelle drag estimates were made for flow-through wind tunnel models of each configuration.
Gillette, W. B.↗
An algorithm for the empirical optimization of antenna arrays
A numerical technique is presented to optimize the performance of arbitrary antenna arrays under realistic conditions. An experimental-computational algorithm is formulated in which n-dimensional minimization methods are applied to measured data obtained from the antenna array. A numerical update formula is used to induce partial derivative information without requiring special perturbations of the array parameters. The algorithm provides a new design for the antenna array, and the method proceeds in an iterative fashion. Test case results are presented showing the effectiveness of the algorithm.
Blank, S.↗
Operation and maintenance requirements of the Army Remotely Piloted Vehicle (RPV)
The Remotely Piloted Vehicle (RPV) system is being developed to provide the Army with a target acquistion, target location, and laser designation capability that will significantly enhance the effectiveness of the artillery. Iterative analyses of the manpower, personnel, and training (MPT) requirements for an RPV system configured to accommodate both a daylight television and a forward looking infrared (FLIR) mission payload subsystem (FMPS) and related support subsystems are examined. Additionally, this analysis incorporates a 24 hour-a-day operational scenario. Therefore, the information presented was developed with a view towards delineating the differences (or deltas) imposed by the new requirements resulting from FMPS/24 hour operating day functions.
Source record↗
Lunar lander conceptual design: Lunar base systems study task 2.2
This study is a first look at the problem of building a lunar lander to support a small lunar surface base. One lander, which can land 25 metric tons, one way, or take a 6 metric ton crew capsule up and down is desired. A series of trade studies are used to narrow the choices and provide some general guidelines. Given a rough baseline, the systems are then reviewed. A conceptual design is then produced. The process was only carried through one iteration. Many more iterations are needed. Assumptions and groundrules are considered.
Source record↗
Direct solution for thermal stresses in a nose cap under an arbitrary axisymmetric temperature distribution
The design of a nose cap for a hypersonic vehicle is an iterative process requiring a rapid, easy to use and accurate stress analysis. The objective of this paper is to develop such a stress analysis technique from a direct solution of the thermal stress equations for a spherical shell. The nose cap structure is treated as a thin spherical shell with an axisymmetric temperature distribution. The governing differential equations are solved by expressing the stress solution to the thermoelastic equations in terms of a series of derivatives of the Legendre polynomials. The process of finding the coefficients for the series solution in terms of the temperature distribution is generalized by expressing the temperature along the shell and through the thickness as a polynomial in the spherical angle coordinate. Under this generalization the orthogonality property of the Legendre polynomials leads to a sequence of integrals involving powers of the spherical shell coordinate times the derivative of the Legendre polynomials. The coefficients of the temperature polynomial appear outside of these integrals. Thus, the integrals are evaluated only once and their values tabulated for use with any arbitrary polynomial temperature distribution.
Davis, Randall C.↗
Lunar lander conceptual design
This paper is a first look at the problems of building a lunar lander to support a small lunar surface base. A series of trade studies was performed to define the lander. The initial trades concerned choosing number of stages, payload mass, parking orbit altitude, and propellant type. Other important trades and issues included plane change capability, propellant loading and maintenance location, and reusability considerations. Given a rough baseline, the systems were then reviewed. A conceptual design was then produced. The process was carried through only one iteration. Many more iterations are needed. A transportation system using reusable, aerobraked orbital transfer vehicles (OTV's) is assumed. These OTV's are assumed to be based and maintained at a low Earth orbit (LEO) space station, optimized for transportation functions. Single- and two-stage OTV stacks are considered. The OTV's make the translunar injection (TLI), lunar orbit insertion (LOI), and trans-Earth injection (TEI) burns, as well as midcourse and perigee raise maneuvers.
Stecklein, J. M.↗
Necessary conditions for the optimality of variable rate residual vector quantizers
Residual vector quantization (RVQ), or multistage VQ, as it is also called, has recently been shown to be a competitive technique for data compression. The competitive performance of RVQ reported in results from the joint optimization of variable rate encoding and RVQ direct-sum code books. In this paper, necessary conditions for the optimality of variable rate RVQ's are derived, and an iterative descent algorithm based on a Lagrangian formulation is introduced for designing RVQ's having minimum average distortion subject to an entropy constraint. Simulation results for these entropy-constrained RVQ's (EC-RVQ's) are presented for memory less Gaussian, Laplacian, and uniform sources. A Gauss-Markov source is also considered. The performance is superior to that of entropy-constrained scalar quantizers (EC-SQ's) and practical entropy-constrained vector quantizers (EC-VQ's), and is competitive with that of some of the best source coding techniques that have appeared in the literature.
Kossentini, Faouzi↗
Reducing neural network training time with parallel processing
Obtaining optimal solutions for engineering design problems is often expensive because the process typically requires numerous iterations involving analysis and optimization programs. Previous research has shown that a near optimum solution can be obtained in less time by simulating a slow, expensive analysis with a fast, inexpensive neural network. A new approach has been developed to further reduce this time. This approach decomposes a large neural network into many smaller neural networks that can be trained in parallel. Guidelines are developed to avoid some of the pitfalls when training smaller neural networks in parallel. These guidelines allow the engineer: to determine the number of nodes on the hidden layer of the smaller neural networks; to choose the initial training weights; and to select a network configuration that will capture the interactions among the smaller neural networks. This paper presents results describing how these guidelines are developed.
Rogers, James L., Jr.↗
A Technique for Transient Thermal Testing of Thick Structures
A new open-loop heat flux control technique has been developed to conduct transient thermal testing of thick, thermally-conductive aerospace structures. This technique uses calibration of the radiant heater system power level as a function of heat flux, predicted aerodynamic heat flux, and the properties of an instrumented test article. An iterative process was used to generate open-loop heater power profiles prior to each transient thermal test. Differences between the measured and predicted surface temperatures were used to refine the heater power level command profiles through the iteration process. This iteration process has reduced the effects of environmental and test system design factors, which are normally compensated for by closed-loop temperature control, to acceptable levels. The final revised heater power profiles resulted in measured temperature time histories which deviated less than 25 F from the predicted surface temperatures.
Horn, Thomas J.↗
Avionic Pictorial Tunnel-/Pathway-/Highway-In-The-Sky Workshops
In 1994-96, Langley Research Center held a series of interactive workshops investigating highway-in-the-sky concepts, which enable precise flight path control. These workshops brought together government and industry display designers and pilots to discuss and fly various concepts in an iterative manner. The primary emphasis of the first workshops was the utility and usability of pathways and the pros and cons of various features available. The final workshops were focused on the specific applications to the eXternal Visibility System (XVS) of the NASA High-speed Research Program, which was concerned with replacement of the forward windows in a High-speed Civil Transport with electronic displays and high resolution video cameras to enable a "No-Droop" configuration. The primary concerns in the XVS application were the prevention of display clutter and obscuration of hazards, as the camera image was the primary means of traffic separation in clear visibility conditions. These concerns were not so prominent in the first workshops, which assumed a Synthetic Vision System application in which hazard locations are known and obscuration is handled easily. The resulting consensus concept has been used since in simulation and flight test activities of many Government programs. and other concepts have been influenced by the workshop discussions.
Parrish, Russell V.↗
Optimization of a Lunar Pallet Lander Reinforcement Structure Using a Genetic Algorithm
This paper presents a design automation process using optimization via a genetic algorithm to design the conceptual structure of a Lunar Pallet Lander. The goal is to determine a design that will have the primary natural frequencies at or above a target value as well as minimize the total mass. Several iterations of the process are presented. First, a concept optimization is performed to determine what class of structure would produce suitable candidate designs. From this a stiffened sheet metal approach was selected leading to optimization of beam placement through generating a two-dimensional mesh and varying the physical location of reinforcing beams. Finally, the design space is reformulated as a binary problem using 1-dimensional beam elements to truncate the design space to allow faster convergence and additional mechanical failure criteria to be included in the optimization responses. Results are presented for each design space configuration. The final flight design was derived from these results.
Burt, Adam O.↗
Sharepoint Team Site Configuration
The Data Mining project seeks to bring the capability of data visualization to NASA anomaly and problem reporting systems for the purpose of improving data trending, evaluations, and analyses. Currently NASA systems are tailored to meet the specific needs of its organizations. This tailoring has led to a variety of nomenclatures and levels of annotation for procedures, parts and anomalies making difficult the realization of the common causes for anomalies. Making significant observations and realizing the connection between these causes without a common way to view data is difficult to impossible. The Data Mining project is in its early stages of presenting a common visualization of normalized data through a web based portal. In this paper I detail what I have learned and what I have accomplished during my time as an intern toward the purpose of creating the project portal. I have gone through an iterative process of familiarization with the project and its goals, site design, research, modification and review on the road to creating a common method and location to view the visualized data created under this project.
iss↗
Assessment of Governing Heat and Mass Transfer Coefficients for Cryogenic No-Vent Top-Off Modeling
No-vent fill / no-vent top-off (NVF/NVTO) is a method to enable the trans-fer of cryogenic propellants without the need to vent. Transferring propellants inmicrogravity environments is necessary to support the long-duration space missionsplanned for the coming decades. A key developmental milestone to developing thiscapability fully is the simulation and experimentation of NVF/NVTO in 1-g settings.This work seeks to advance the former by assessing the effectiveness of different heattransfer correlations used in a 1-g non-equilibrium model. Heat transfer correlationsfor natural convection and two-phase boiling heat transfer are compared against ex-perimental results for 34 different tests. Two distinct experiments, comprised of 21tests, are presented in detail here. These tests cover a variety of different injectionmethods, receiver tank geometries, receiver tank materials, cryogenic propellants, andinitial tank states. Overall for the cases tested in this work, the model was able topredict the pressure response within the receiver tank to a mean absolute percentageerror of 25.9%. The temperature response error rate was 29.5% and 24.9% for wall-gasand two-phase nodes, respectively. Compared to the worst case correlation set tested,the pressure prediction error rate represents a 31% improvement. For the cases pre-sented in this work, the mean pressure prediction error rate was 15.5%. Future workcould evaluate the effectiveness of this model against experiments conducted withdifferent propellants or different initial conditions. In its current form, however, themodel can still be used to help reduce design and testing time for 1-g experiments,enabling the quicker iteration that is necessary to meet the technological demands offuture space missions.
No-Vent Top Off↗
Supporting Exploration Missions by Enabling Exploration Mission System Software
Future exploration missions will consist of a multitude of data sources, systems, and operators collaborating to complete mission objectives. Presently, NASA is instantiating the contractual mechanisms, such as the Exploration Extravehicular Activity Services (xEVAS) and Human Landing System (HLS) contracts, to produce these mission assets. Architectural planning is also underway to establish the networking protocols and infrastructure to digitally create and connect mission elements, such as LunaNET. However, without new horizontally integrated data systems, these advancements will be limited in their ability to get mission data appropriately integrated into the plan, train, fly, explore workflow of the flight operations workforce. Here we describe several mission system software development efforts underway that are designed to support human spaceflight missions. This paper describes the current iterations of a suite of tools to support EVA procedure authoring and execution, and mission context creation for both International Space Station (ISS) and Artemis missions. These tools have been developed iteratively and continue to be used in present-day ISS operations on orbit and in several NASA facilities such as the Neutral Buoyancy Lab (NBL) and Artemis field testing. These solutions demonstrate how software development can be aligned with ongoing operations development activities to discover the features that best support both current and future human spaceflight missions.
Matthew J. Miller↗
Approaching Complex Societal Problems Tied to Aviation
From climate change to health inequity, humankind faces complex societal challenges that aviation can both exacerbate and help to alleviate. In this paper we describe our approach to identifying and approaching complex societal challenges with existing or potential ties to aviation as part of the NASA Convergent Aeronautics Solutions (CAS) project. We detail three example challenges that we have done preliminary work on: enabling access to healthcare, supporting resilient rural communities, and ensuring supply chain wellness. Our approach to understanding and addressing such challenges involves iterative human-centered, systems-oriented, and futures-based design. We provide a discussion of cross-cutting characteristics of complex societal challenges that appear fruitful for aviation to address and detail the lessons we have learned thus far in approaching such challenges.
Elizabeth F. Rieken↗
Supporting Exploration Missions by Enabling Exploration Mission System Software
Future exploration missions will consist of a multitude of data sources, systems, and operators collaborating to complete mission objectives. Presently, NASA is instantiating the contractual mechanisms, such as the Exploration Extravehicular Activity Services (xEVAS) and Human Landing System (HLS) contracts, to produce these mission assets. Architectural planning is also underway to establish the networking protocols and infrastructure to digitally create and connect mission elements, such as LunaNET. However, without new horizontally integrated data systems, these advancements will be limited in their ability to get mission data appropriately integrated into the plan, train, fly, explore workflow of the flight operations workforce. Here we describe several mission system software development efforts underway that are designed to support human spaceflight missions. This paper describes the current iterations of a suite of tools to support EVA procedure authoring and execution, and mission context creation for both International Space Station (ISS) and Artemis missions. These tools have been developed iteratively and continue to be used in present-day ISS operations on orbit and in several NASA facilities such as the Neutral Buoyancy Lab (NBL) and Artemis field testing. These solutions demonstrate how software development can be aligned with ongoing operations development activities to discover the features that best support both current and future human spaceflight missions.
Matthew Miller↗
Quiet Clean Short-haul Experimental Engine (QCSEE) composite fan frame design report
An advanced composite frame which is flight-weight and integrates the functions of several structures was developed for the over the wing (OTW) engine and for the under the wing (UTW) engine. The composite material system selected as the basic material for the frame is Type AS graphite fiber in a Hercules 3501 epoxy resin matrix. The frame was analyzed using a finite element digital computer program. This program was used in an iterative fashion to arrive at practical thicknesses and ply orientations to achieve a final design that met all strength and stiffness requirements for critical conditions. Using this information, the detail design of each of the individual parts of the frame was completed and released. On the basis of these designs, the required tooling was designed to fabricate the various component parts of the frame. To verify the structural integrity of the critical joint areas, a full-scale test was conducted on the frame before engine testing. The testing of the frame established critical spring constants and subjected the frame to three critical load cases. The successful static load test was followed by 153 and 58 hours respectively of successful running on the UTW and OTW engines.
Mitchell, S. C.↗