Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Green-emitting cubic GaN/In 0.16 Ga 0.84 N/GaN quantum well with 32% internal quantum efficiency at room temperature

Structural and optical properties of a green-emitting cubic (i.e., zinc blende) GaN/In 0.16 Ga 0.84 N/GaN single quantum well structure are reported. The active layer is grown on a phase-pure (i.e., 100%) cubic GaN enabled on a 1 × 1 cm 2 U-grooved silicon (100) through aspect ratio phase trapping. Energy dispersive x-ray spectroscopy combined with room temperature cathodoluminescence reveals 522 nm green light emission at room temperature with only 16.0% ± 1.6% of indium content, which is ~30% less than the amount of indium needed in a traditional green-emitting hexagonal (i.e., wurtzite) well. Temperature-dependent behavior of the green emission, such as activation energy, s-shaped peak energy shift, and linewidth, is reported. Cathodoluminescence at 8 and 300 K reveals an internal quantum efficiency of 32.0% ± 0.6%, which is higher than any reported value for cubic wells. Altogether, phase-pure cubic active layers on phase transition cubic GaN are shown to be promising for green and longer wavelength emitters.

42 ENGINEERING↗

The influence of V-defects, leakage, and random alloy fluctuations on the carrier transport in red InGaN MQW LEDs

Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the Indium composition increases. Additionally, the larger polarization and band offset barriers between high indium content InGaN quantum wells and GaN quantum barriers increase the forward voltage. In blue and green LEDs, random alloy fluctuations and V-defects play a key role in reducing the forward voltage. When V-defects are present, either naturally or intentionally introduced, they create an alternative path for carrier injection into the MQWs through the V-defect sidewalls. This injection mechanism explains the turn-on voltages of green LEDs. However, in InGaN red LEDs, these two phenomena do not reduce the forward voltage as effectively as in blue and green LEDs, and consequently, the computed forward voltage remains significantly higher than the measured one. Furthermore, currents are observed at low voltages before the turn-on voltage (V<ℏω/e=2.0 V) of red LEDs. To address this, we introduce dislocation-induced tail states in the modeling, suggesting that leakage current through these states may play a significant role both below and at turn-on voltages. The simulation also indicates that leakage carriers below turn-on accumulate, partially diffuse in the QWs, screen the polarization-induced barrier in the low injection regime, and further reduce the forward voltage. Despite these beneficial effects, a drawback of dislocation-induced tail states is the enhanced nonradiative recombination in the dislocation line region. This study provides a detailed analysis of device injection physics in InGaN QW red LEDs and outlines potential optimization strategies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transformation of 2D group-III selenides to ultra-thin nitrides: enabling epitaxy on amorphous substrates

Here, the experimental realization of two-dimensional (2D) gallium nitride (GaN) has enabled the exploration of 2D nitride materials beyond boron nitride. Here we demonstrate one possible pathway to realizing ultra-thin nitride layers through a two-step process involving the synthesis of naturally layered, group-III chalcogenides (GIIIC) and subsequent annealing in ammonia (ammonolysis) that leads to an atomic-exchange of the chalcogen and nitrogen species in the 2D-GIIICs. The effect of nitridation differs for gallium and indium selenide, where gallium selenide undergoes structural changes and eventual formation of ultra-thin GaN, while indium selenide layers are primarily etched rather than transformed by nitridation. Further investigation of the resulting GaN films indicates that ultra-thin GaN layers grown on silicon dioxide act as effective 'seed layers' for the growth of 3D GaN on amorphous substrates.

2D materials↗

Current-induced spin polarization in InGaAs and GaAs epilayers with varying doping densities

Here, the current-induced spin polarization and momentum-dependent spin-orbit field were measured in In x Ga 1-x As epilayers with varying indium concentrations and silicon doping densities. Samples with higher indium concentrations and carrier concentrations and lower mobilities were found to have larger electrical spin generation efficiencies. Furthermore, current-induced spin polarization was detected in GaAs epilayers despite the absence of measurable spin-orbit fields, indicating that the extrinsic contributions to the spin-polarization mechanism must be considered. Theoretical calculations based on a model that includes extrinsic contributions to the spin dephasing and the spin Hall effect, in addition to the intrinsic Rashba and Dresselhaus spin-orbit coupling, are found to reproduce the experimental finding that the crystal direction with the smaller net spin-orbit field has larger electrical spin generation efficiency and are used to predict how sample parameters affect the magnitude of the current-induced spin polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron and hole contributions to normal-state transport in the superconducting system Sn 1 - x In x Te

Indium-doped SnTe has been of interest because the system can exhibit both topological sur- face states and bulk superconductivity. While the enhancement of the superconducting transition temperature is established, the character of the electronic states induced by indium doping remains poorly understood. We report a study of magneto-transport in a series of Sn 1-x In x Te single crystals with 0:1 ≤ x ≤ 0:45. From measurements of the Hall effect, we find that the dominant carrier type changes from hole-like to electron-like at x ~ 0:25; one would expect electron-like carriers if the In ions have a valence of +3. For single crystals with x = 0:45, corresponding to the highest super- conducting transition temperature, pronounced Shubnikov-de Haas oscillations are observed in the normal state. In measurements of magnetoresistance, we nd evidence for weak anti-localization (WAL). We attribute both the quantum oscillations and the WAL to bulk Dirac-like hole pockets, previously observed in photoemission studies, which coexist with the dominant electron-like carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Localization Effect in Photoelectron Transport Induced by Alloy Disorder in Nitride Semiconductor Compounds

Near-band-gap photoemission spectroscopy experiments were performed on p-GaN and p-InGaN/GaN photocathodes activated to negative electron affinity. Here, the photoemission quantum yield of the InGaN samples with more than 5% of indium drops by more than 1 order of magnitude when the temperature is decreased while it remains constant for lower indium content. This drop is attributed to a freezing of photoelectron transport in p-InGaN due to electron localization in the fluctuating potential induced by the alloy disorder. This interpretation is supported by the disappearance at low temperature of the peak in the photoemission spectrum that corresponds to the contribution of the photoelectrons relaxed at the bottom of the InGaN conduction band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Isolation of Single Donors in ZnO

The shallow donor in zinc oxide (ZnO) is a promising semiconductor spin qubit with optical access. Single indium donors are isolated in a commercial ZnO substrate using plasma focused ion beam (PFIB) milling. Quantum emitters are identified optically by spatial and frequency filtering. The indium donor assignment is based on the optical bound exciton transition energy and magnetic dependence. The emission stability of these single donors in terms of both intensity and frequency, alongside their transition linewidths less than twice the lifetime limit, highlight the promise of single In donors as optically accessible spin qubits. Here, the optical stability of single donors after FIB fabrication is promising for optical device integration required for scalable quantum technologies based on single donors in direct band gap semiconductors.

42 ENGINEERING↗

Microfluidic electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

Porous, high-surface-area electrode architectures are described that allow structural characterization of interfacial amorphous thin films with high spatial resolution under device-relevant functional electrochemical conditions using high-energy X-ray (>50 keV) scattering and pair distribution function (PDF) analysis. Porous electrodes were fabricated from glass-capillary array membranes coated with conformal transparent conductive oxide layers, consisting of either a 40 nm–50 nm crystalline indium tin oxide or a 100 nm–150 nm-thick amorphous indium zinc oxide deposited by atomic layer deposition. These porous electrodes solve the problem of insufficient interaction volumes for catalyst thin films in two-dimensional working electrode designs and provide sufficiently low scattering backgrounds to enable high-resolution signal collection from interfacial thin-film catalysts. For example, PDF measurements were readily obtained with 0.2 Å spatial resolution for amorphous cobalt oxide films with thicknesses down to 60 nm when deposited on a porous electrode with 40 µm-diameter pores. This level of resolution resolves the cobaltate domain size and structure, the presence of defect sites assigned to the domain edges, and the changes in fine structure upon redox state change that are relevant to quantitative structure–function modeling. The results suggest the opportunity to leverage the porous, electrode architectures for PDF analysis of nanometre-scale surface-supported molecular catalysts. In addition, a compact 3D-printed electrochemical cell in a three-electrode configuration is described which is designed to allow for simultaneous X-ray transmission and electrolyte flow through the porous working electrode.

36 MATERIALS SCIENCE↗

Sputtered Aluminum Oxide and p+ Amorphous Silicon Back-Contact for Improved Hole Extraction in Polycrystalline CdSexTe1-x and CdTe Photovoltaics

A thin layer of Al 2 O 3 at the back of CdSe x T e1-x /CdTe devices is shown to passivate the back interface and drastically improve surface recombination lifetimes and photoluminescent response. Despite this, such devices do not show an improvement in open-circuit voltage (VOC.) Adding a p + amorphous silicon layer behind the Al 2 O 3 bends the conduction band upward, reducing the barrier to hole extraction and improving collection. Further optimization of the Al 2 O 3 , amorphous silicon (a-Si), and indium-doped tin oxide (ITO) layers, as well as their interaction with the CdCl 2 passivation process, are necessary to translate these electro-optical improvements into gains in voltage.

14 SOLAR ENERGY↗

Conductive Adhesives for Metallization of Interdigitated Back Contact Solar Cells

The metallization and interconnection of Si solar cells to form a module is usually a multi-step process: cells are metallized individually, soldered into strings, and subsequently assembled into a module. Furthermore, the metallization process for individual cells must be compatible with the doped surfaces being contacted, which creates additional challenges when moving from diffused junctions to heterojunctions and/or passivated contact structures. To mitigate these problems and streamline module manufacturing for the case of interdigitated back contact (IBC) cell modules, we developed an approach wherein unmetallized IBC cells are bonded directly to a circuitized backsheet using a conductive adhesive (CA) that only conducts out-of-plane. The metal/CA/silicon stack is bonded by hot-pressing at 100-200 degrees C.For a CA consisting of ethylene vinyl acetate (EVA) filled with Ag-coated spheres or indium powder we find that contact resistivities in the range of 1-10 Wcm 2 are obtained, regardless of which conductive filler and which hot pressing parameters are used. XPS revealed that about 1-2 nm EVA residue bonds to the Si in these samples, suggesting the formation of an insulating barrier that is responsible for the high contact resistance. Using indium powder alone, improved contact resistivities <0.6 Wcm 2 , high shunt resistances, and an implied open-circuit voltage loss below 10 mV were obtained. Furthermore, a cost estimate is presented, indicating that substantial cost savings of up to $10/m 2 , or about $0.05/W DC , are possible through CA-based IBC module manufacturing.

14 SOLAR ENERGY↗

CdSexTe1-x/CdTe Devices with Reduced Interface Recombination Through Novel Back Contacts and Group-V Doping

Since excellent carrier lifetimes and front interface electronic quality are now achieved, rear interface recombination can limit V OC in CdSexTe1-x/CdTe solar cells. Several back-contact structures for devices were fabricated using combinations of tellurium, aluminum oxide, amorphous silicon, and indium tin oxide (ITO). Time-resolved photoluminescence was used to characterize such structures. We show increasingly improved interface passivation through the subsequent use of aluminum oxide, amorphous silicon, and ITO. Additionally, we show that arsenic-doped absorbers form a more passive interface with numerous back contact structures.

aluminum oxide↗

Review of Direct Neutron Conversion and Detection Processes

Commercial and laboratory neutron detection systems use indirect neutron response of materials like pressurized helium-3 (via nuclear reaction 3He(n, p)3H) to measure and count neutrons emanating from a source. Recently a host of semiconductors, especially a ternary semiconductor of lithium indium diselenide (6LiInSe2) and a quaternary alloy of enriched lithium-6, indium, phosphorous, and selenium (6LiInP2Se6), have shown promising neutron counting possibilities by directly converting neutrons into charge-carrying elements within the body of the semiconductor. These semiconductors have high thermal neutron capture cross sections, suitable energy bandgaps (~2.0 electron volts) for room-temperature operations, and a favorable electronic band structure for efficient electron charge transport. The article examines the semiconductor properties of these compounds in terms of their neutron counting capabilities and possible ways to extract neutron energy information from them. Lithium-6 and boron-10 (with thermal neutron absorption cross sections of 938 ± 6 and 3855 ± 26 barns, respectively) produce charged particles to be measured via indirect neutron interactions. The efficiency of indirect conversion neutron detectors is limited because of the inefficiencies in conversion mechanism. In case of direct conversion, the neutrons create charged particles in a single material for neutron capture and charge collection, increasing detection efficiency. Unlike 3He proportional counters, which provide no neutron energy information, the semiconductors can be used as neutron energy spectrometer. Fully resolved neutron energy by 6LiInP2Se6 from a plutonium-beryllium source has been reported in the literature. We will discuss the influence of these multilayered semiconductors’ crystallographic structures and growth techniques on neutron energy determination.

61 RADIATION PROTECTION AND DOSIMETRY↗

Demonstration of p-side down green light emitting diodes with high external quantum efficiencies

GaN/(In,Ga)N heterostructure based visible Light Emitting Diodes (LED) have enabled a wide range of solid-state lighting applications through excellent efficiency and power output in the shorter wavelengths (≤ 475nm) of violet/blue emission. However, the efficiency of emitters in the longer wavelength range (≥ 500nm) drops drastically due to the need to include higher Indium-content in the InGaN quantum wells. Large average polarization fields for high Indium-content quantum wells for conventional P-up structure, opposes the depletion field leading to large electrostatic barriers for both electrons and holes injection. LEDs fabricated along the N-polar direction with a p-up orientation or Ga-polar direction with p-down orientation lower such electrostatic barriers to carrier injection due to alignment of the polarization dipole field and depletion region field. This can therefore theoretically improve the electrical injection efficiency and reduce the forward voltage of operation. Such a Ga-polar p-down LED requires a bottom buried tunnel junction to avoid current spreading issues for a buried p-GaN layer. In this report, we demonstrate for the first time Ga-polar p-down green emitting LEDs using bottom tunnel junctions and having external quantum efficiencies comparable to those of equivalent p-up LEDs grown by Metal Organic Chemical Vapor Deposition (MOCVD).

36 MATERIALS SCIENCE↗

Neutron dose equivalent measured at the maze door with various openings for the jaws and MLC

Purpose: This study was undertaken to explore the effects of the jaws and the MLC openings on the neutron dose equivalent (DE) at the maze door and neutron flux at the patient plane. Methods: The neutron dose equivalent was measured at the maze entrance door of a 15 MV therapy linear accelerator room. All measurements were performed using various field sizes up to 40 cm x 40 cm. Activation detectors constructed from natural Indium (In) were exposed at Cd envelope to neutrons in order to estimate relative changes of epithermal neutron fluences in the patient plane. Results: Our study showed that the dose equivalent at the maze door is at the highest when the jaw are closed and that maximal jaws opening reduces the DE by more than 20%. The neutron dose equivalent at the maze door measured for radiation fields defined by jaws do not differ significantly from the DE measured when MLC determines the same size radiation field. The epithermal capture reaction rate measured using different jaw openings differs by approximately 10%. When an MLC leaf is inserted into a fixed geometry for one opening of the jaws, an increase of the epithermal neutron capture reaction rate in Indium activation detectors was observed. Conclusions: There is no significant difference in the neutron DE when MLC defines radiation field instead of jaws. This leads to the conclusion that the overall number of neutrons remains similar and it does not depend on how primary photon beam was stopped--by the jaws or the MLC. An increase of the fast neutron capture reaction rate when MLC leaves are inserted probably originates from the neutron scattering.

61 RADIATION PROTECTION AND DOSIMETRY↗

Three-dimensional nanoscale metal, metal oxide, and semiconductor frameworks through DNA-programmable assembly and templating

Controlling the three-dimensional (3D) nanoarchitecture of inorganic materials is imperative for enabling their novel mechanical, optical, and electronic properties. Here, by exploiting DNA-programmable assembly, we establish a general approach for realizing designed 3D ordered inorganic frameworks. Through inorganic templating of DNA frameworks by liquid- and vapor-phase infiltrations, we demonstrate successful nanofabrication of diverse classes of inorganic frameworks from metal, metal oxide and semiconductor materials, as well as their combinations, including zinc, aluminum, copper, molybdenum, tungsten, indium, tin, and platinum, and composites such as aluminum-doped zinc oxide, indium tin oxide, and platinum/aluminum-doped zinc oxide. The open 3D frameworks have features on the order of nanometers with architecture prescribed by the DNA frames and self-assembled lattice. Structural and spectroscopic studies reveal the composition and organization of diverse inorganic frameworks, as well as the optoelectronic properties of selected materials. The work paves the road toward establishing a 3D nanoscale lithography.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Materials Data on InSn2P(H3C)8 by Materials Project

InPIn(CH3)2InCH3(SnCH3)2(Sn(CH3)2)3Sn(CH3)3(CH3)10(P)2 crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of two indium phosphide molecules; two indium, methyl- molecules; twenty methane molecules; four methylstannane molecules; four phosphine molecules; two In(CH3)2 clusters; six Sn(CH3)2 clusters; and two Sn(CH3)3 clusters. In each In(CH3)2 cluster, In1+ is bonded in a 2-coordinate geometry to two C4- and one H+0.92+ atom. There are one shorter (2.42 Å) and one longer (2.77 Å) In–C bond lengths. The In–H bond length is 2.44 Å. There are two inequivalent C4- sites. In the first C4- site, C4- is bonded in a 3-coordinate geometry to one In1+ and three H+0.92+ atoms. There are a spread of C–H bond distances ranging from 1.07–1.32 Å. In the second C4- site, C4- is bonded in a 3-coordinate geometry to one In1+ and three H+0.92+ atoms. There are a spread of C–H bond distances ranging from 1.10–1.13 Å. There are six inequivalent H+0.92+ sites. In the first H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the second H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the third H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the fourth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the fifth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one In1+ and one C4- atom. In the sixth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In each Sn(CH3)2 cluster, Sn2+ is bonded in a 2-coordinate geometry to two C4- atoms. There is one shorter (1.70 Å) and one longer (2.11 Å) Sn–C bond length. There are two inequivalent C4- sites. In the first C4- site, C4- is bonded in a 4-coordinate geometry to one Sn2+ and three H+0.92+ atoms. There are a spread of C–H bond distances ranging from 0.90–1.54 Å. In the second C4- site, C4- is bonded in a distorted trigonal pyramidal geometry to one Sn2+ and three H+0.92+ atoms. There are a spread of C–H bond distances ranging from 1.08–1.54 Å. There are six inequivalent H+0.92+ sites. In the first H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the second H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the third H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the fourth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the fifth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the sixth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In each Sn(CH3)3 cluster, Sn2+ is bonded in a 5-coordinate geometry to three C4- and two H+0.92+ atoms. There are a spread of Sn–C bond distances ranging from 2.05–2.14 Å. There are one shorter (2.10 Å) and one longer (2.16 Å) Sn–H bond lengths. There are three inequivalent C4- sites. In the first C4- site, C4- is bonded in a 2-coordinate geometry to one Sn2+ and three H+0.92+ atoms. There are a spread of C–H bond distances ranging from 1.01–1.50 Å. In the second C4- site, C4- is bonded in a 4-coordinate geometry to one Sn2+ and three H+0.92+ atoms. There are a spread of C–H bond distances ranging from 1.04–1.50 Å. In the third C4- site, C4- is bonded in a 2-coordinate geometry to one Sn2+ and three H+0.92+ atoms. There are a spread of C–H bond distances ranging from 1.05–1.50 Å. There are nine inequivalent H+0.92+ sites. In the first H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the second H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the third H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one Sn2+ and one C4- atom. In the fourth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the fifth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the sixth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one Sn2+ and one C4- atom. In the seventh H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the eighth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom. In the ninth H+0.92+ site, H+0.92+ is bonded in a single-bond geometry to one C4- atom.

36 MATERIALS SCIENCE↗

A new architecture as transparent electrodes for solar and IR applications based on photonic structures via soft lithography

Transparent conducting electrodes with the combination of high optical transmission and good electrical conductivity are essential for solar energy harvesting and electric lighting devices. Currently, indium tin oxide (ITO) is used because ITO offers relatively high transparency (>80%) to visible light and low sheet resistance (R s = 10 ohms/square (Ω /2)) for electrical conduction. However, ITO is costly due to limited indium reserves, and it is brittle. These disadvantages have motivated the search for other conducting electrodes with similar or better properties. There has been research on a variety of electrode structures involving carbon nanotube networks, graphene films, nanowire and nanopatterned meshes and grids. Due to their novel characteristics in light manipulation and collection, photonic crystal structures show promise for further improvement. Here, we report on a new architecture consisting of nanoscale high aspect ratio metallic photonic structures as transparent electrodes fabricated via a combination of processes. For (Au) and silver (Ag) structures, the visible light transmission can reach as high as 80%, and the sheet resistance of the structure can be as low as 3.2Ω /2. The optical transparency of the high aspect ratio metal structures at visible wavelength range is comparable to that of ITO glass, while their sheet resistance is more than 3 times lower, which indicates a much higher electrical conductivity of the metal structures. Furthermore, the high aspect ratio metal structures have very high infrared (IR) reflection (90%) for the transverse magnetic (TM) mode, which can lead to the development of fabrication of metallic structures as IR filters for heat control applications. Investigations of interdigitated structures based on the high aspect ratio metal electrodes are ongoing to study the feasibility in smart window applications in light transmission modulation.

14 SOLAR ENERGY↗

Semi-polar GaN Materials Technology for High IQE Green LEDs

The goal of this NETL funded program was to improve the IQE in green (and longer wavelength) nitride- based LEDs structures by using semi-polar GaN planar orientations for InGaN multiple quantum well (MQW) growth. These semi-polar orientations have the advantage of significantly reducing the piezoelectric fields that distort the QW band structure and decrease electron-hole overlap. In addition, semipolar surfaces potentially provide a more open surface bonding environment for indium incorporation, thus enabling higher indium concentrations in the InGaN MQW. The goal of the proposed work was to select the optimal semi-polar orientation and explore wafer miscuts around this orientation that produced the highest quantum efficiency LEDs. At the end of this program we had hoped to have MQWs active regions at 540 nm with an IQE of 50% and an EQE of 40%, which would be approximately twice the estimated current state-of-the-art.

Koleske, Daniel D.↗