SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
News highlight intended for a new publication, the "LDRD Quarterly Highlights." The quarterly newsletter contains highlights from LDRD and SDRD programs and will be published on a LANL-hosted website. This story was previously featured on the NNSS.gov website
Recent work at the National Renewable Energy Laboratory (NREL) and throughout the bioenergy community has highlighted incentives associated with co-processing bio-intermediates in existing refineries to reduce capital costs associated with renewable fuels and chemicals production and reduce overall risk for emerging biomass conversion technologies. This presentation summarizes the techno-economic analysis results from the NREL-Petrobras collaboration that focused on refinery integration of fast pyrolysis oil through co-processing in the fluid catalytic cracking (FCC) process. The NREL-Petrobras work highlights the economic opportunity for refiners to engage in co-processing for low-carbon products and introduces the risks for refiners based on variability in crude and fossil-product markets. The NREL-Petrobras results also serve as a basis to inform policy design that reduces economic risk for refinery co-processing and repurposing opportunities. The final topics in the presentation highlight experimental capabilities and emerging analysis approaches at NREL and partner laboratories that support the development and commercial deployment of refinery utilization strategies.
The Marine Energy Advanced Materials project addresses the barriers and uncertainties facing marine renewable energy developers in using composite materials for load-bearing structures. Sponsored by the U.S. Department of Energy's Water Power Technologies Office, the multiyear project comprises of collaborators from the National Renewable Energy Laboratory (NREL), Sandia National Laboratories, Pacific Northwest National Laboratory (PNNL), Montana State University (MSU), Florida Atlantic University (FAU), and industry stakeholders. As part of the Marine Energy Advanced Materials project, marine renewable energy industry surveys and assessments were conducted to identify key materials and knowledge gaps that hinder the adoption of composite materials in marine renewable energy structures. Specific knowledge gaps highlighted for composite materials were environmental effects, fatigue strengths, and bonded and bolted interconnects (composite/composite and composite/metal). It was concluded that many of these gaps could be addressed through subcomponent validation; consequently, a program was developed at NREL with the goals of developing subcomponent validation methods for appropriate marine energy materials, which would improve the understanding of design allowables for full-scale structural components and joints. Ultimately, the aim is to reduce timelines and costs associated with full-scale structural validation efforts while also providing near-net-scale static and fatigue data of composite/metal subcomponents for marine renewable energy systems. To approach these goals, a testing program was developed at NREL to investigate a variety of materials and structural design details at the subcomponent scale to understand (a) the effects of harsh and corrosive marine energy environments and (b) the static and fatigue strengths of the complex geometries. The recent study from this testing program is perhaps the largest that has ever been conducted with respect to specimen scale and geographic diversity of underwater environmental conditions that the specimens were subjected to. A variety of specimen geometries were designed by NREL to highlight key features of multimaterial (composite/composite or metal/composite) interconnects that may be used in marine renewable energy structural designs. The designs used several different composite matrices, adhesives, and marine-grade steels, which were highlighted in the surveys as being the most appropriate for harsh marine environments. Composite panels were then manufactured at MSU, and were subsequently manufactured into test specimens by NREL. The specimens were shipped to FAU and PNNL for conditioning in ocean water tanks at various temperatures for an extended period. The specimens were then returned to NREL for structural validation. This presentation will provide an overview of recent advances within the testing program in terms of specimen design and test methods, and will discuss results and key findings of the subcomponent testing program to date at NREL.
This is a poster that was presented at the 2023 Carbon Management Research Project Review Meeting. The poster highlights primary takeaways from two reports that were recently released by NETL on retrofitting natural gas combined cycle (NGCC) and pulverized coal (PC) power plants with solvent-based carbon capture technology. The poster highlights the performance and cost of retrofitting these plants at 90 and 95% carbon capture, including consideration of cases that attempt to makeup for steam turbine derates caused by extracting steam for use in the capture process. Additionally, the poster highlights NETL's recently released carbon capture retrofit databases (CCRD) for both NGCC and PC plants. The CCRDs are public-facing tools that allow the end-user to approximate the incremental cost of CO2 capture for a user defined plant with retrofitted capture technology.
Direct air capture (DAC) technology has been developing at an accelerated rate. Independent, comprehensive, and transparent techno-economic analyses (TEAs) of DAC technologies are required to inform future development. NETL is publishing an update to the 2022 sorbent-based DAC case study report. This manuscript highlights select TEA results that will be presented in the upcoming NETL report. The analysis considers three sorbent-based DAC system configurations (direct steam temperature swing, indirect steam temperature swing, and direct steam temperature/vacuum swing) and two scenarios for providing the required electricity and steam (stand-alone system with a combined heat and power plant generating the required steam and electricity, and a purchased power case utilizing an electric boiler). Detailed sensitivity analyses are included and highlight the impact of external market factors, sorbent performance, and economies of scale. The potential for cost reductions by opting for temperature vacuum swing adsorption is highlighted. More detailed background and TEA results will be presented in the upcoming NETL report titled “Direct Air Capture Case Studies: Sorbent System (Revision 1)”.
Abstract The dimerization of small molecule acceptors (SMAs) is a promising strategy for enhancing the long‐term stability and power conversion efficiency (PCE) of organic solar cells (OSCs). However, the reported DSMAs are primarily limited to end‐linked molecular configurations, highlighting the need for further exploration of various dimer architectures. Herein, the development of two distinct core‐linked dimerized SMAs (DYF‐V and DYF‐E) are reported with tailored linker structures (vinylene and ethynyl, respectively), achieving high‐performance OSCs (PCE = 18.53%). Interestingly, a subtle change in the linker structures results in markedly different molecular properties and photovoltaic performances of the dimer acceptors. DYF‐E with an ethynyl linker exhibits more twisted backbone conformation and mitigated aggregation property compared to DYF‐V, inducing desirable blend morphologies with a polymer donor including high crystallinity, face‐on oriented packing structures, and well‐intermixed domains. Thus, the DYF‐E‐based OSCs exhibit a high PCE (17.02%), which significantly outperforms the DYF‐V‐based OSCs (PCE = 9.98%). Furthermore, the ternary OSCs based on DYF‐E achieve a higher PCE of 18.53%. Thus, this study highlights the significance of selecting an appropriate linker in core‐linked dimerized SMAs for producing high‐performance OSCs.
Searching for Kagome magnets with novel magnetic and electronic properties has been attracting significant efforts recently. Here, the magnetic, electronic, and thermoelectric properties of Fe 3 Ge single crystals with Fe atoms forming a slightly distorted Kagome lattice are reported. It is shown that Fe 3 Ge exhibits a large anomalous Hall effect and anomalous Nernst effect. The observed anomalous transverse thermoelectric conductivity $|α^A_{xz}|$ reaches ≈4.6 A m −1 K −1 , which is larger than the conventional ferromagnets and most of the topological ferromagnets reported in literature. The first-principles calculations suggest that these exceptional transport properties are dominated by the intrinsic mechanism, which highlights the significant contribution of the Berry curvature of massive Dirac gaps in the momentum space. Additionally, a topological Hall resistivity of 0.9 µΩ cm and a topological Nernst coefficient of 1.2 µV K −1 are also observed, which are presumably ascribed to the Berry phase associated with the field-induced non-zero scalar spin chirality. These features highlight the synergic effects of the Berry phases in both momentum space and real space of Fe 3 Ge, which render it an excellent candidate for room-temperature thermoelectric applications based on transverse transport.
Perovskite materials are promising contenders as the active layer in light-harvesting and light-emitting applications if their long-term stability can be sufficiently increased. Chemical and structural engineering are shown to enhance long-term stability, but the increased complexity of the material system also leads to inhomogeneous functional properties across various length scales. Thus, scanning probe and high-resolution microscopy characterization techniques are needed to reveal the role of local defects and the results promise to act as the foundation for future device improvements. Here, a look at the parameter space: technique-specific sample penetration depth versus probe size highlights a gap in current methods. High spatial resolution combined with a deep penetration depth is not yet achievable. However, multimodal measurement technique may be the key to covering this parameter space. In this perspective, current advanced spectro-microscopy methods which have been applied to perovskite materials are highlighted.
The exciton binding energy ( E b ) is a key parameter that governs the physics of many optoelectronic devices. At their best, trustworthy and precise measurements of E b challenge theoreticians to refine models, are a driving force in advancing the understanding of a material system, and lead to efficient device design. At their worst, inaccurate E b measurements lead theoreticians astray, sow confusion within the research community, and hinder device improvements by leading to poor designs. Here, this review article seeks to highlight the pros and cons of different measurement techniques used to determine E b , namely, temperature‐dependent photoluminescence, resolving Rydberg states, electroabsorption, magnetoabsorption, scanning tunneling spectroscopy, and fitting the optical absorption. Due to numerous conflicting E b values reported for halide perovskites (HP) and transition metal dichalcogenides (TMDC) monolayers, an emphasis is placed on highlighting these measurements in an attempt to reconcile the variance between different measurement techniques. It is argued that the experiments with the clearest indicators are in agreement on the following values: ≈350–450 meV for TMDC monolayers between SiO 2 and vacuum, ≈150–200 meV for hBN‐encapsulated TMDC monolayers, ≈200–300 meV for common lead‐iodide 2D HPs, and ≈10 meV for methylammonium lead iodide.
Abstract Early‐stage cost evaluation during catalyst development holds the potential to accelerate the commercialization and deployment of advanced catalytic materials for sustainable chemical processes. The modeling and assessment of manufacturing costs as early as the laboratory synthesis scale, for example, focusing on materials costs and synthesis performance metrics, can support the development of an experimental–economic feedback loop that enables rapid insight into cost drivers associated with catalyst synthesis and highlights areas that require focused research and development effort. Ultimately, this feedback loop supports the realization of an economic understanding of the overall synthetic process and highlights opportunities to reduce costs, serving as the foundation for the scale‐up of catalyst manufacturing. Herein, a case study is presented utilizing CatCost, a free and publicly available estimation tool for the evaluation of catalyst manufacturing costs, to perform a cost‐responsive optimization of the synthesis of nickel nanoparticles (Ni NPs). It is demonstrated that reagent substitutions with more cost‐effective analogs, coupled with stoichiometric optimization, afford a 58% reduction in raw materials cost without changing the product yield or properties.
Quinones are appealing targets as organic electrolytes for aqueous redox flow batteries (RFBs), but their utility continues to be constrained by limited stability under operating conditions. The present study evaluates the stability of a series water-soluble quinones, with redox potentials ranging from 605–885 mV vs. NHE, under acidic aqueous conditions (1 M H2SO4). Four of the quinones are examined as cathodic electrolytes in an aqueous RFB, paired with anthraquinone-2,7-disulfonate (AQDS) as the anodic electrolyte. The RFB data complement the solution stability measures and show that the most stable electrolyte is a tetrasubstituted quinone containing four sulfonated thioether substituents. The results highlight the importance of substituting all C–H positions of the quinone in order to maximize the quinone stability and set the stage for design of improve organic electrolytes for aqueous RFBs. The authors thank Joseph Fourie for assisting in the synthesis of compound 8. Financial support for this work was provided by the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences (SSS, TWR, JBG, CWA, YP), with supplemental contributions by the Wisconsin Alumni Research Foundation (WARF) through the WARF Accelerator Program (YQ and partial support for JBG, CWA, YP). NMR spectroscopy facilities were partially supported by the NSF (CHE-0342998 and CHE-1048642), a UW Madison Instructional Laboratory Modernization Award, and a gift from Paul J. and Margaret M. Bender.
Anaerobes thrive in the absence of oxygen and are an untapped reservoir of biotechnological potential. Therefore, bioprospecting efforts focused on anaerobic microbial diversity could rapidly uncover new enzymes, pathways, and chassis organisms to drive biotechnology innovation. Despite their potential utility, anaerobic fermenters are viewed as inefficient from a biochemical perspective because their metabolisms produce fewer ATP (~2) per molecule of glucose processed than heterotrophic respirers (~32–38 ATP). While aerobes excel at ATP generation, they are often less efficient than anaerobes at processes that compete with ATP generation for cellular resources. This perspective highlights how anaerobic adaptations are advantageous for synthetic biology and biomanufacturing applications through the engineering of microbial cell factories. We further highlight emerging applications of anaerobic bioprocessing, including the use of anaerobic metabolisms for lignocellulosic bioprocessing, human and environmental health, and value-added bioproduction.
Abstract INTRODUCTION To understand the role of neuroinflammation in Alzheimer's disease (AD), we characterized immune‐related proteins in central and peripheral biofluids. METHODS Selection of participants from the Translational Biomarker of Aging and Dementia (TRIAD) cohort with available translocator protein (TSPO) positron emission tomography (PET), cerebrospinal fluid (CSF) (n = 97), and plasma (n = 165). Biofluid samples analyzed with Olink technology (368 inflammation proteins). RESULTS Elevated proteins levels in CSF of TSPO‐positive individuals were identified. Functional enrichment analysis of CSF proteins revealed processes implicated in AD (MAPK, ERK cascades, cytokine, and leukocyte signaling). Selected candidates (CXCL1 and TNFRSF11B) showed high correlation with each other in CSF and with TSPO PET signal, but weaker associations with amyloid and tau PET. No significantly changed proteins in plasma between TSPO groups were found. DISCUSSION This explorative study identified two potential targets in CSF showing correlations with TSPO, amyloid and tau PET, suggesting a direct link between neuroinflammation, expression of these proteins and their potential implication in AD. Highlights Several proteins are elevated in CSF of TSPO PET‐positive individuals, linking them to neuroinflammation. Elevated CSF proteins were enriched in pathways such as MAPK, ERK, and cytokine signaling, linking them to the AD pathophysiology. Candidate proteins (CXCL1 and TNFRSF11B) correlated strongly with TSPO PET, particularly in brain regions known to be affected in AD. Although none of the plasma proteins remained significant after multiple comparisons correction when comparing their expression between TSPO groups, as done for CSF, candidate CSF proteins were found to correlate with plasmatic proteins, highlighting the complexity of the immune system.
Abstract Understanding the diverse electrochemical reactions occurring at electrode‐electrolyte interfaces (EEIs) is a critical challenge to developing more efficient energy conversion and storage technologies. Establishing a predictive molecular‐level understanding of solid electrolyte interphases (SEIs) is challenging due to the presence of multiple intertwined chemical and electrochemical processes occurring at battery electrodes. Similarly, chemical conversions in reactive electrochemical systems are often influenced by the heterogeneous distribution of active sites, surface defects, and catalyst particle sizes. In this mini review, we highlight an emerging field of interfacial science that isolates the impact of specific chemical species by preparing precisely‐defined EEIs and visualizing the reactivity of their individual components using single‐entity characterization techniques. We highlight the broad applicability and versatility of these methods, along with current state‐of‐the‐art instrumentation and future opportunities for these approaches to address key scientific challenges related to batteries, chemical separations, and fuel cells. We establish that controlled preparation of well‐defined electrodes combined with single entity characterization will be crucial to filling key knowledge gaps and advancing the theories used to describe and predict chemical and physical processes occurring at EEIs and accelerating new materials discovery for energy applications.
Abstract Understanding the diverse electrochemical reactions occurring at electrode‐electrolyte interfaces (EEIs) is a critical challenge to developing more efficient energy conversion and storage technologies. Establishing a predictive molecular‐level understanding of solid electrolyte interphases (SEIs) is challenging due to the presence of multiple intertwined chemical and electrochemical processes occurring at battery electrodes. Similarly, chemical conversions in reactive electrochemical systems are often influenced by the heterogeneous distribution of active sites, surface defects, and catalyst particle sizes. In this mini review, we highlight an emerging field of interfacial science that isolates the impact of specific chemical species by preparing precisely‐defined EEIs and visualizing the reactivity of their individual components using single‐entity characterization techniques. We highlight the broad applicability and versatility of these methods, along with current state‐of‐the‐art instrumentation and future opportunities for these approaches to address key scientific challenges related to batteries, chemical separations, and fuel cells. We establish that controlled preparation of well‐defined electrodes combined with single entity characterization will be crucial to filling key knowledge gaps and advancing the theories used to describe and predict chemical and physical processes occurring at EEIs and accelerating new materials discovery for energy applications.
Decarbonisation from a variety of industrial and power emission sectors highlights a marked need for capture technologies that can be optimized for different CO 2 sources and integrated into an equally diverse range of applications of captured CO 2 as a feedstock. Some capture technologies are already operated at an industrial scale but may not be optimal for all required applications. Advanced tailored sorbent-based technologies allow flexible operation and reduced costs as they offer higher capture capacities and significantly lower energy penalties than the state-of-the-art systems. To accelerate the discovery, development, and deployment of novel advanced materials, it is critically important that efforts between experimentalists, theoreticians, and process engineers are coordinated. The PrISMa project addresses this challenge by integrating materials design with process design and environmental considerations to allow for tailor-making carbon capture solutions optimally tuned for local sources and sinks. In this article, we highlight some of the recent results obtained with the PrISMa platform.
Single-atom catalysts (SACs) with isolated metal centers are attracting great research interest because of their maximized metal utilization rates and unique structures. In the last decade, significant efforts have been made to design highly efficient and costeffective SACs with applications in automobile exhaust aftertreatment. SACs have not only demonstrated their high potential for improving the catalytic performance of current automobile exhaust catalysts but also provided an ideal platform for understanding the origins of catalyst reactivity. In this review, we summarize the general strategies for promoting the reactivity of metal SACs while maintaining their thermal stability during exhaust-abatement-related reactions. Highlights are provided on well-performed SACs for CO oxidation, unburnt hydrocarbon (HC) oxidation, and the selective catalytic reduction of NOx. The reaction mechanism and structure– performance relationship of SAC during these reactions are also discussed. Finally, perspectives are given on the trending research fields for designing more efficient single-atom automobile exhaust catalysts in the future.
There is keen interest to develop new technologies to recycle the plastic poly(ethylene terephthalate) (PET). To this end, the use of PET-hydrolyzing enzymes has shown promise for PET deconstruction to its monomers, terephthalate (TPA) and ethylene glycol (EG). Here, we compare the Ideonella sakaiensis PETase wild-type enzyme to a previously reported improved variant (W159H/S238F). We compare the thermostability of each enzyme and describe a 1.45 Å resolution structure of the mutant, highlighting changes in the substrate binding cleft compared to the wild-type enzyme. Subsequently, the performance of the wild-type and variant enzyme was compared as a function of temperature, substrate morphology, and reaction mixture composition. These studies show that reaction temperature has the strongest influence on performance between the two enzymes. We also show that both enzymes achieve higher levels of PET conversion for substrates with moderate crystallinity relative to amorphous substrates. Finally, we assess the impact of product accumulation on reaction progress for the hydrolysis of both PET and bis(2-hydroxyethyl) terephthalate (BHET). Each enzyme displays different inhibition profiles to mono(2-hydroxyethyl) terephthalate (MHET) and TPA, while both are sensitive to inhibition by EG. Overall, this work highlights the importance of reaction conditions, substrate selection, and product accumulation for catalytic performance of PET-hydrolyzing enzymes, which have implications for enzyme screening in the development of enzyme-based polyester recycling.