Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fusion Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Plume dynamics in femtosecond laser ablation of metals

In femtosecond laser ablation the plume has two components: a faster-moving plasma part and a slower nanoparticle plume which contains most of the ablated material. This paper describes the results of experiments to comprehensively characterize the plume in laser ablation of Ni with {approx_equal}300 fs pulses at 527 nm. Both single-pulse and double-pulse irradiation was used. The laser ablation depth was measured using white light interferometry. The dynamics of the plasma part of the ablation plume was measured using Langmuir ion probes. The shape of the overall ablation plume was recorded by depositing a thin film on a transparent substrate and measuring the thickness distribution. The expansion of the plasma plume is well described by the Anismov isentropic model of plume expansion. Just above the ablation threshold, the nanoparticle plume is also well described by the Anisimov expansion model. However, at higher fluence a wider plume is formed, perhaps due to the pressure exerted by plasma. For double-pulse ablation it is observed that as the second pulse is delayed beyond {approx_equal}20 ps the ablation depth is reduced and the ion yield is increased. This behaviour is due to reheating of the nascent plasma plume produced by the first pulse. This generates a pressure pulse that acts as a tamper which impedes the fragmentation and ablation of deeper layers of material.

36 MATERIALS SCIENCE↗

Black Metals Produced by Femtosecond Laser Pulses

Using high-intensity femtosecond laser pulses for surface structuring, we produce the black metals using Au and Ti90/Al6/V4 that have absorption over 90% over a broad wavelength range from ultraviolet to infrared. The enhanced absorption of the black metals is caused by surface structures. The black metals produced here can find uses in a variety of applications.

36 MATERIALS SCIENCE↗

Laser Shock Processing of Metallic Materials: Coupling of Laser-Plasma Interaction and Material Behaviour Models for the Assessment of Key Process Issues

Profiting by the increasing availability of laser sources delivering intensities above 109 W/cm{sup 2} with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals. The main advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Although significant work from the experimental side has been contributed to explore the optimum conditions of application of the treatments and to assess their ultimate capability to provide enhanced mechanical behaviour to work-pieces of typical materials, only limited attempts have been developed in the way of full comprehension and predictive assessment of the characteristic physical processes and material transformations with a specific consideration of real material properties. In the present paper, a review on the physical issues dominating the development of LSP processes from a high intensity laser-matter interaction point of view is presented along with the theoretical and computational methods developed by the authors for their predictive assessment and practical results at laboratory scale on the application of the technique to different materials.

36 MATERIALS SCIENCE↗

Surface Modification of Material by Irradiation of Low Power Atmospheric Pressure Plasma Jet

Application of a low power atmospheric pressure plasma jet for surface modifications of acrylic, aluminum, and highly crystalline graphite has been carried out experimentally. The plasma jet was generated with batteries-driven high voltage modulator. The power consumed for the plasma generation was estimated to be 0.12 W. The plasma had hydroxyl radicals, which is known as a strong oxider from an observation of optical emission spectrum. After the irradiation of the plasma, the surfaces of acrylic and aluminum became to be hydrophilic from the compartment of contact angle of water on these surfaces. The surface of highly crystalline graphite irradiated by the plasma jet had oxygen-rich functional groups such as C-O, C = O, and O = C-O.

36 MATERIALS SCIENCE↗

Surface structuring by ultrashort laser pulses: A review of photoionization models

Photoionization models have been introduced and compared in a three-dimensional code utilizing electromagnetic wave propagation in dielectric materials such as fused silica. Ionization rates are initially compared and matched to linear and circular polarizations. Then, they are implemented in the propagation code followed by some hydrodynamic simulations. Results on the structural and optical modifications have been compared with available experimental data. Experimental damage, ablation threshold, and a theoretical damage threshold criteria have been utilized to discriminate between the different models.

36 MATERIALS SCIENCE↗

From amorphous to microcrystalline: Phase transition in rapid synthesis of hydrogenated silicon thin film in low frequency inductively coupled plasmas

Hydrogenated silicon (Si:H) thin films were fabricated on glass substrates by low frequency inductively coupled plasma-assisted chemical vapor deposition using a silane precursor with low hydrogen dilution at room temperature. The crystallinity and microstructure properties of the Si:H thin films deposited at different inductive radio-frequency (rf) power density were systematically studied by Raman spectroscopy, x-ray diffraction, and scanning electron microscopy. We found that at a low rf power density of 16.7 to 20.8 mW/cm{sup 3}, the structure of silicon thin films evolves from a completely amorphous phase to an intermediate phase containing both amorphous and microcrystalline silicon. As the power density is increased to a moderate value of 25 mW/cm{sup 3}, a highly crystallized (111)-preferred hydrogenated microcrystalline silicon ({mu}c-Si:H) film featuring a vertically aligned cone-shaped structure, is emerging. Both the crystallinity and deposition rate exhibit a monotonic increase with the increase in the rf power density, reaching a maximum value of 85% and 1.07 nm/s, respectively, at a power density of 41.7 mW/cm{sup 3}. Scanning electron microscopy reveals that continuous and dense {mu}c-Si:H films with grain size of tens to hundreds nanometers can be achieved deterministically without the formation of amorphous incubation layer, and this is of great importance for synthesis of multilayer structures in p-i-n solar cells. The formation mechanism of the {mu}c-Si:H films and the elimination of the amorphous incubation layer are explained in terms of the high electron density and the plasma-surface interactions.

36 MATERIALS SCIENCE↗

Hydrophobic treatment of organics against glass employing nonequilibrium atmospheric pressure pulsed plasmas with a mixture of CF{sub 4} and N{sub 2} gases

A hydrophobic organics surface selectively against glass was realized by employing nonequilibrium atmospheric-pressure pulsed plasmas with a mixture of CF{sub 4} and N{sub 2} gases. The organic surface was drastically altered to have a high hydrophobicity, while the glass surface itself remained hydrophilic after the plasma treatment with the addition of a small amount of CF{sub 4} to the N{sub 2} gas. After 100 CF{sub 4}/N{sub 2} plasma treatments, no thin film deposition was observed on the organic material. To investigate the characteristics of the CF{sub 4}/N{sub 2} plasma, the exhaust gas from the plasma was measured by using ion attachment mass spectroscopy (IAMS). The IAMS spectrum indicated that the amounts of CF{sub 3} and F radicals were increased drastically with increasing addition of CF{sub 4}. A mechanism of the selective surface modification was clarified on a result of surface chemical bonding with the gas phase.

36 MATERIALS SCIENCE↗

Reduced ablative Rayleigh-Taylor growth measurements in indirectly driven laminated foils

Indirectly driven, ablative Rayleigh-Taylor instability growth measurements in Ge-doped plastic foils were studied using face-on and side-on x-ray radiography. Laminated samples consisting of alternating layers of Ge-doped and undoped plastic and homogeneous Ge-doped foils were considered. We show for the first time that hydrodynamics do not depend upon structuration of the samples and that stabilization occurs in the case of laminated samples. All data were found to be in good agreement with bi-dimensional hydrosimulations based on theoretical and numerical predictions published earlier [L. Masse, Phys. Rev. Lett. 98, 245001 (2007)], encouraging new designs using laminated structures for ignition capsules.

36 MATERIALS SCIENCE↗

Optimization and Control of Plasma Doping Processes

Plasma doping (PLAD) is a well characterized alternative to beam-line technology, which has already been adopted in high volume manufacturing in the ultra high dose, low energy regime for advanced DRAM technology nodes. As semiconductor technology evolves, the demand for ever lower energy, higher dose implants will continue to grow, and the requirements for process control will become increasingly stringent. During plasma immersion ion implantation, ionized species present in the plasma are extracted and implanted into the wafer, while other processes, such as deposition, etching and sputtering, are competing in parallel. The dopant profile into the substrate results from contributions of all these mechanisms. Using the hardware and plasma composition control features present in the PLAD system to balance the contributions of the above processes, the dopant profile can be modified and dopant retention can be optimized. In this paper, we detail the process control approach used to optimize process performance for low energy, high dose implants, and validate it with plasma and wafer state data.

36 MATERIALS SCIENCE↗

Formation of Ultra-Shallow Junctions by Advanced Plasma Doping Techniques

The fabrication of advanced CMOS devices calls for production worthy doping solutions to address requirements for increasingly shallow and abrupt junctions, while maintaining high dopant activation to meet series resistance requirements. Plasma Doping (PLAD), which has already been adopted in high volume manufacturing in the ultra high dose, low energy regime for advanced DRAM technology nodes, is now being investigated for source drain extension (SDE) implants, where precise and repeatable dopant placement is critical for maintaining control over device parameters. In this article, we investigate the process performance of SDE implants carried out in a VIISta registered PLAD system using p- type dopant precursors. Key metrics, such as junction depth, profile abruptness and sheet resistance are reported for as-implanted junctions, as well as samples processed with low thermal budget anneal techniques. Device performance data demonstrating the feasibility of the approach are presented. The advanced control features in the PLAD system are critical in enabling the process performance required for SDE implants.

36 MATERIALS SCIENCE↗

The effect of He plasma treatment on properties of organosilicate glass low-k films

The effect of low-pressure He plasma on properties of nanoporous organosilicate glasses low-k films with 24% and 33% open porosity is studied. The influence of ions, VUV radiation, and metastable atoms are extracted separately using a special experimental system designed for this purpose. The low-k films treated in He plasma were exposed to O or H atoms in the downstream of high-pressure O{sub 2} or H{sub 2} rf discharge. The changes in chemical composition and structure occurring in low-k films were measured before and after all treatments. The loss probabilities of oxygen and hydrogen atoms on the low-k film surface were measured for both treated and pristine films. It is shown that the film pretreatment in He plasma leads to the noticeable densification of the top surface layer up to complete sealing all the films studied. The sealing layer prevents O atoms from deep penetration to the film bulk and carbon extraction. The sealing mechanism related to the joint impact of low-energy ions and VUV photons with metastable atoms in He plasma is discussed in detail.

36 MATERIALS SCIENCE↗

Magnetic field effect on stimulated Raman scattering of electromagnetic waves from nanoparticle lattice

The influence of a static magnetic field on the Raman scattering of a millimeter pump wave propagating through periodic nanoparticles is studied. Formulas for the growth rate of the scattered electromagnetic wave and the electrostatic wave are derived and analyzed. It is found that the growth rate for the backscattering case is larger than that of forward scattering and the growth rate is increased by the static magnetic field. A resonance in the dispersion relation of the electromagnetic wave is found as a combination of the cyclotron and plasma frequency. However, no instability was found for this lower branch of the dispersion curve.

36 MATERIALS SCIENCE↗

Nanoscale control of energy and matter in plasma-surface interactions: Toward energy- and matter-efficient nanotech

The approach to control the elementary processes of plasma-surface interactions to direct the fluxes of energy and matter at nano- and subnanometer scales is introduced. This ability is related to the solution of the grand challenge of directing energy and matter at nanoscales and is critical for the renewable energy and energy-efficient technologies for a sustainable future development. The examples of deterministic synthesis of self-organized arrays of metastable nanostructures in the size range beyond the reach of the present-day nanofabrication are considered to illustrate this possibility. By using precisely controlled and kinetically fast nanoscale transfer of energy and matter under nonequilibrium conditions and harnessing numerous plasma-specific controls of species creation, delivery to the surface, nucleation, and large-scale self-organization of nuclei and nanostructures, the arrays of metastable nanostructures can be created, arranged, stabilized, and further processed to meet the specific requirements of the envisaged applications.

36 MATERIALS SCIENCE↗

Generation of plane shocks using intense heavy ion beams: Application to Richtmyer-Meshkov instability growth studies

A design of a novel experiment that allows the generation of a well defined, steady, and strong plane shock wave employing an intense uranium ion beam that is incident on a wedge shaped compound target is presented. This technique will open up the possibility of carrying out unique high energy density physics experiments using these shock waves. One such experiment is to study the growth of Richtmyer-Meshkov instability in fluids as well as in solids, both in the linear and nonlinear regimes, as shown by detailed numerical simulations presented in this paper. The ion beam parameters used in this study correspond to those that will be available at the Facility for Antiprotons and Ion Research (FAIR) at Darmstadt.

36 MATERIALS SCIENCE↗

Combined experimental and modeling studies of microwave activated CH{sub 4}/H{sub 2}/Ar plasmas for microcrystalline, nanocrystalline, and ultrananocrystalline diamond deposition

A comprehensive study of microwave (MW) activated CH{sub 4}/H{sub 2}/Ar plasmas used for diamond chemical vapor deposition is reported, focusing particularly on the effects of gross variations in the H{sub 2}/Ar ratio in the input gas mixture (from H{sub 2}/Ar mole fraction ratios of > 10:1, through to {approx}1:99). Absolute column densities of C{sub 2}(a) and CH(X) radicals and of H(n = 2) atoms have been determined by cavity ringdown spectroscopy, as functions of height (z) above a substrate and of process conditions (CH{sub 4}, H{sub 2}, and Ar input mole fractions, total pressure, p, and input microwave power, P). Optical emission spectroscopy has also been used to explore the relative densities of electronically excited H atoms, and CH, C{sub 2}, and C{sub 3} radicals, as functions of these same process conditions. These experimental data are complemented by extensive 2D (r, z) modeling of the plasma chemistry, which provides a quantitative rationale for all of the experimental observations. Progressive replacement of H{sub 2} by Ar (at constant p and P) leads to an expanded plasma volume. Under H{sub 2}-rich conditions, > 90% of the input MW power is absorbed through rovibrational excitation of H{sub 2}. Reducing the H{sub 2} content (as in an Ar-rich plasma) leads to a reduction in the absorbed power density; the plasma necessarily expands in order to accommodate a given input power. The average power density in an Ar-rich plasma is much lower than that in an H{sub 2}-rich plasma operating at the same p and P. Progressive replacement of H{sub 2} by Ar is shown also to result in an increased electron temperature, an increased [H]/[H{sub 2}] number density ratio, but little change in the maximum gas temperature in the plasma core (which is consistently {approx}3000 K). Given the increased [H]/[H{sub 2}] ratio, the fast H-shifting (C{sub y}H{sub x} + H {r_reversible} C{sub y}H{sub x-1} + H{sub 2}; y = 1-3) reactions ensure that the core of Ar-rich plasma contains much higher relative abundances of ''product'' species like C atoms, and C{sub 2,} and C{sub 3} radicals. The effects of Ar dilution on the absorbed power dissipation pathways and the various species concentrations just above the growing diamond film are also investigated and discussed.

36 MATERIALS SCIENCE↗

Improved diamond surfaces following lift-off and plasma treatments as observed by x-ray absorption spectroscopy

We have investigated the nature of the residual damage in diamond crystals following the ion implantation/graphitization ''lift-off'' process, using near-edge x-ray absorption fine structure spectroscopy and transmission electron microscopy. A defective but crystalline interface is found, which displays dense pre-edge unoccupied states and an almost complete loss of the core-level C 1s exciton signature. This residual crystalline damage is resistant to standard chemical etching, however a hydrogen plasma treatment is found to completely recover a pristine diamond surface. Analysis and removal of residual ion-induced damage is considered crucial to the performance of many diamond device architectures.

36 MATERIALS SCIENCE↗

Plasmon hybridization in parallel nano-wire systems

We apply the plasmon hybridization method to a double-nano-wire system, providing a simple and intuitive description of the plasmon excitations in the system. We apply the two-center cylindrical coordinate system for mathematical convenience and find an explicit form of the surface plasmon oscillations, in terms of the interaction between the bare plasmon modes of the individual surfaces of the nano-wires. We present numerical results to display how the plasmon excitations of the system depend on nano-wire separation when there is no angular momentum transfer, i.e., when m = 0.

36 MATERIALS SCIENCE↗

Effect of plasma parameters on growth and field emission properties of spherical carbon nanotube tip

The effect of plasma parameters (e.g., electron density and temperature, ion density and temperature, neutral atom density and temperature) on the growth (without a catalyst), structure, and field emission properties of a spherical carbon nanotube (CNT) tip has been theoretically investigated. A theoretical model of charge neutrality, including the kinetics of electrons, positively charged ions, and neutral atoms and the energy balance of the various species in plasma, has been developed. Numerical calculations of the radius of the spherical CNT tip for different CNT number densities and plasma parameters have been carried out for the typical glow discharge plasma parameters. It is found that upon an increase in the CNT number density and plasma parameters, the radius of the spherical CNT tip decreases, and consequently the field emission factor for the spherical CNT tip increases.

36 MATERIALS SCIENCE↗