Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fluids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

The development of an intelligent interface to a computational fluid dynamics flow-solver code

Researchers at NASA Lewis are currently developing an 'intelligent' interface to aid in the development and use of large, computational fluid dynamics flow-solver codes for studying the internal fluid behavior of aerospace propulsion systems. This paper discusses the requirements, design, and implementation of an intelligent interface to Proteus, a general purpose, three-dimensional, Navier-Stokes flow solver. The interface is called PROTAIS to denote its introduction of artificial intelligence (AI) concepts to the Proteus code.

Williams, Anthony D.↗

Fuel spray simulation with two-fluid nozzles

Two-phase interacting flow inside a two-fluid fuel atomizer was investigated and a correction of aerodynamic and liquid-surface forces with characteristic drop diameter was obtained for liquid-jet breakup in Mach 1 gas flow. Nitrogen gas mass-flux was varied from 6 to 50 g/sq cm sec by using four differently sized two-fluid atomizers with nozzle diameters varying from 0.32 to 0.56 cm. The correlation was derived by using the acoustic gas velocity, V sub c, as a basic parameter in defining and evaluating the dimensionless product of the Weber (We) and Reynolds (Re) numbers. By using the definition of WeRe, it was found that the ratio of orifice diameter to Sauter mean drop diameter could be correlated with the dimensionless ratio WeRe and the gas to liquid density ratio.

Ingebo, Robert D.↗

Transient heat and fluid flow in porous annuli

An analysis of the transient behavior of heat and fluid flow in porous annuli is reported. The problem analyzed has relevance to the design of adsorption compressors. Consideration is given to filling a porous annulus with a fluid while cooling is applied. The governing equations for the transport process considered have been solved numerically using a finite-difference method. A parametric study has been conducted to reveal the influence of the different parameters. The conditions for maximizing the mass intake are identified.

Sathe, S. B.↗

Integrated fountain effect pump device for fluid management at low gravity

A new device for fluid management at low gravity is described. The system is basically the same as the enclosed capillary device using screens, in which the screens along the gallery channels are replaced by porous plugs which are responsible for both the fluid retention and pumping of He II; in this device, no downstream pump is needed. The plugs in contact with liquid He on both sides act as a fountain-effect pumps (FEPs), while plugs exposed to vapor on one side behave as vapor-liquid phase separators (VLPSs). The total net rate of He II transfer into the receiving tank equals the mass flow rate through the FEP plugs minus the liquid loss from the VLPS plugs. The results of the performance analysis of this integrated FEP device are presented together with its schematic diagram.

Yuan, S. W. K.↗

Computational fluid dynamics - A personal view

This paper provides a personal view of computational fluid dynamics. The main theme is divided into two categories - one dealing with algorithms and engineering applications and the other with scientific investigations. The former category may be termed computational aerodynamics, with the objective of providing reliable aerodynamic or engineering predictions. The latter category is essentially basic research, where the algorithmic tools are used to unravel and elucidate fluid-dynamic phenomena hard to obtain in a laboratory. A critique of the numerical solution techniques for both compressible and incompressible flows is included. The discussion on scientific investigations deals in particular with transition and turbulence.

Hussaini, M. Y.↗

Interpretation and modeling of the averaged equations for a fluid-solid flow

A self-consistent derivation of the conservation laws is given for flows of a fluid-solid mixture. A unified analytical framework for obtaining constitutive relations is provided. This analysis uses a control volume/control surface approach that is widely used in fluid mechanics. All terms in the governing equations and the constitutive relations are written in terms of the mass-weighted averages except solid concentration. It is believed that the mass-weighted average is the natural bridge between micromechanics and constitutive relations. The derived momentum equations contain terms that differ from all existing models except that of Prosperetti and Jones (1984). However, their assumptions are not needed here. Special attention is given to the solid phase pressure. The physical basis of the previously assumed form for this pressure (Givler 1987) becomes clear. A number of related phenomena are also discussed. These include the anti-diffusion and anisotropic normal stresses. The energy equations are also different from existing models.

Shen, Hayley H.↗

Computational fluid dynamics

An overview of computational fluid dynamics (CFD) activities at the Langley Research Center is given. The role of supercomputers in CFD research, algorithm development, multigrid approaches to computational fluid flows, aerodynamics computer programs, computational grid generation, turbulence research, and studies of rarefied gas flows are among the topics that are briefly surveyed.

Source record↗

Investigation of SSME alternate high pressure fuel turbopump lift-off seal fluid and structural dynamic interaction

The Space Shuttle main engine (SSME) alternate turbopump development program (ATD) high pressure fuel turbopump (HPFTP) design utilizes an innovative lift-off seal (LOS) design that is located in close proximity to the turbine end bearing. Cooling flow exiting the bearing passes through the lift-off seal during steady state operation. The potential for fluid excitation of lift-off seal structural resonances is investigated. No fluid excitation of LOS resonances is predicted. However, if predicted LOS natural frequencies are significantly lowered by the presence of the coolant, pressure oscillations caused by synchronous whirl of the HPFTP rotor may excite a resonance.

Elrod, David A.↗

P-T condition fo deformation from fluid inclusions in mylonites

Structural petrology of fluid inclusions in deformed rocks can be used to identify inclusions entrapped during various stages of deformation. Standard thermobarometry on these inclusions can then provide estimates of the P-T (pressure-temperature) conditions of deformation. The application of this technique is illustrated using fluid inclusions in mylonites from the Quetico Fault Zone, Canada. The inferred P-T conditions fall with the P-T field of mylonitisation derived from isotopic, microstructural and phase equilibrium studies.

Mclellan, Eileen↗

Noninvasive estimation of fluid shifts between body compartments by measurement of bioelectric characteristics

Previous research has established that bioelectrical characteristics of the human body reflect fluid status to some extent. It has been previously assumed that changes in electrical resistance (R) and reactance (X) are associated with changes in total body water (TBW). The purpose of the present pilot investigation was to assess the correspondence between body R and X and changes in estimated TBW and plasma volume during a period of bedrest (simulated weightlessness). R and X were measured pre-, during, and post- a 13 day bedrest status. Although a clear relationship was not elucidated, evidence was found suggesting that R and X reflect plasma volume rather than TBW. Indirect evidence provided by previous studies which investigated other aspects of the electrical/fluid relationship, also suggests the independence of TBW and electrical properties. With further research, a bioelectrical technique for noninvasively tracking fluid changes consequent to space flight may be developed.

Bishop, Phillip A.↗

Effect of fluid countermeasures of varying osmolarity on cardiovascular responses to orthostatic stress

Current operational procedures for shuttle crewmembers include the ingestion of a fluid countermeasure approximately 2 hours before reentry into the earth's gravitational field. The ingestion of the fluid countermeasure is thought to restore plasma volume and improve orthostatic responses upon reentry. The present countermeasure consists of ingesting salt tablets and water to achieve an isotonic solution. It has yet to be determined whether this is the optimal drink to restore orthostatic tolerance. It is also not known whether the drink solution is effective in increasing plasma volume. The purpose here is to evaluate the effectiveness of drink solutions of different osmolarity on restoring plasma volume and orthostatic responses. A hypertonic drink solution was more effective in restoring plasma volume after dehydration than an isotonic solution. However, there were no differences in their effects on an orthostatic challenge. These data suggest that the plasma volume differences produced in this study were not sufficient to produce differences in the cardiovascular responses to an orthostatic challenge, or there are other changes that occur during space flight that are more important in determining orthostatic intolerance.

Davis, John E.↗

Development of an integrated BEM for hot fluid-structure interaction

One of the most difficult problems in engine structural component durability analysis is the determination of the temperatures and fluxes in the structural components directly in contact with the hot gas flow path. Currently there exists no rational analytical or numerical technique which can effectively deal with this problem. Since the temperature distribution in the structural components are strongly influenced by both the fluid flow and the deformation as well as the cooling system in the structure, the only effective way to deal with this problem is to develop an integrated solid mechanics, fluid mechanics and heat transfer analysis for this problem. Herein, the Boundary Element Method (BEM) is chosen as the basic analysis tool principally because the definition of quantities like fluxes, temperatures, displacements, and velocities are very precise on a boundary based discretization scheme. One fundamental difficulty is that a BEM analysis requires a considerable amount of analytical work which is not present in other numerical methods. During the past year, all of this analytical work was completed and a two dimensional, general purpose code was written. A portion of the work is summarized.

Dargush, G. F.↗

Cosmic rays at fluid discontinuities

Cosmic-ray transport near discontinuities in the background fluid velocity is considered. Matching conditions for the cosmic-ray distribution are derived for both shear and compressive (shock) discontinuities, keeping terms to second order in the ratio of fluid speed to energetic-particle speed. Acceleration is found at shear discontinuities, which is not present in the first-order theory, and a modification of the matching condition at shocks. If there is no particle source concentrated at a shock, the new condition reduces to that obtained from first-order theory. Monte Carlo simulations show good agreement with the theory.

Jokipii, J. R.↗

Fluid flow in solidifying monotectic alloys

Use of a two-wavelength holographic technique results in a simultaneous determination of temperature and composition profiles during directional solidification in a system with a miscibility gap. The relationships among fluid flow, phase separation, and mass transport during the solidification of the monotectic alloy are discussed. The primary sources of fluid motion in this system are buoyancy and thermocapillary forces. These forces act together when phase separation results in the formation of droplets (this occurs at the solid-liquid interface and in the bulk melt). In the absence of phase separation, buoyancy results from density gradients related to temperature and compositional gradients in the single-phase bulk melt. The effects of buoyancy are especially evident in association with water- or ethanol-rich volumes created at the solid-liquid growth interface.

Ecker, A.↗

Treatment of coupled fluid-structure interaction problems by a mixed variational principle

A general three-field variational principle is obtained for the motion of an acoustic fluid enclosed in a rigid or flexible container by the method of canonical decomposition applied to a modified form of the wave equation in the displacement potential. The general principle is specialized to a mixed two-field principle that contains the fluid displacement potential and pressure as independent fields. Semidiscrete finite-element equations of motion based on this principle are displayed.

Felippa, Carlos A.↗

Nonlinear spacial instability of a fluid sheet

The mechanism of nonlinear distortion of a fluid sheet leading to atomization is investigated numerically with the use of vortex dynamics and experimentally by means of holography. The configuration investigated consists of a planar fluid sheet emerging from a rectangular slit with and without coflowing air. The numerical model is two-dimensional, inviscid, and includes surface tension effects. The experimental results indicate the existence of well-defined three-dimensional structures. These are formed mainly by the nonlinear interaction of transverse and streamwise disturbances. The transverse disturbances are associated with the Kelvin-Helmholtz instability while the streamwise disturbances appear related to streamwise vortices possibly originating inside the nozzle.

Rangel, R. H.↗

Adaptivity and smart algorithms for fluid-structure interaction

This paper reviews new approaches in CFD which have the potential for significantly increasing current capabilities of modeling complex flow phenomena and of treating difficult problems in fluid-structure interaction. These approaches are based on the notions of adaptive methods and smart algorithms, which use instantaneous measures of the quality and other features of the numerical flowfields as a basis for making changes in the structure of the computational grid and of algorithms designed to function on the grid. The application of these new techniques to several problem classes are addressed, including problems with moving boundaries, fluid-structure interaction in high-speed turbine flows, flow in domains with receding boundaries, and related problems.

Oden, J. Tinsley↗

Effect of lower-body positive pressure on postural fluid shifts in men

The effect of the lower-body positive pressure (LBPP) on the orthostatic fluid and protein shifts were investigated in five men during combined tilt-table/antigravity suit inflation and deflation experiments. Changes in the mass densities of venous blood and plasma were measured and the values were used to calculate the densities of erythrocytes, whole-body blood, and shifted fluid. It was found that the application of 60 mm Hg LBPP during 60-deg head-up tilt prevented about half of the postural hemoconcentration occurring during passive head-up tilt.

Hinghofer-Szalkay, H.↗