Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Finite Element Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Generalizing synthetic data-trained acoustic predictive models to real-world measurements

Acoustic Resonance Spectroscopy (ARS) is highly sensitive to structural properties such as material, geometry, and environmental conditions; as a consequence, it can noninvasively measure internal properties that are unobservable by most other methods. Because of its sensing capabilities and low implementation cost and complexity, ARS has potential as a paradigm shift in noninvasive sensing, characterization, and monitoring applications. However, extracting specific properties from ARS measurements, comprising the vibration spectrum of a test object, is challenging due to the sensitivity of the spectra to other structural changes not being measured, e.g. manufacturing tolerances, component coupling, environmental variation, etc. Neural Networks are promising tools for identifying trends in ARS measurements, but their training typically requires large datasets, which are often impractical to obtain for real-world systems. Synthetic data can be simulated efficiently, but discrepancies between synthetic and real-world data frequently lead to poor generalization when testing on the real-world data. We propose a novel ARS model training framework that enables networks trained exclusively on synthetic ARS data to generalize effectively to real-world measurements. Our approach leverages the Correlation Alignment (CORAL) technique to enforce the extraction of features common to both synthetic and real-world domains. As a case study, we demonstrate noninvasive ARS-based pressure measurements in sealed systems. Finite element method (FEM) simulations were used to generate synthetic training data across diverse vessel configurations and pressure conditions, and model performance was then tested on real-world measurements. We demonstrate that robust machine learning models for ARS can be developed without large real-world datasets, significantly broadening the applicability of ARS for noninvasive sensing. Moreover, the approach is extensible to other sensing modalities where synthetic data are abundant but real-world data are limited.

36 MATERIALS SCIENCE↗

Delamination analysis of metal-ceramic multilayer coatings subject to nanoindentation

Internal damage has been experimentally observed in aluminum (Al)/silicon carbide (SiC) multilayer coatings subject to nanoindentation loading. Post-indentation characterization has identified that delamination at the coating/substrate interface is the most prominent form of damage. In this study the finite element method is employed to study the effect of delamination on indentation-derived hardness and Young's modulus. The model features alternating Al/SiC nanolayers above a silicon (Si) substrate, in consistence with the actual material system used in earlier experiments. Cohesive elements with a traction–separation relationship are used to facilitate delamination along the coating/substrate interface. Delamination is observed numerically to be sensitive to the critical normal and shear stresses that define the cohesive traction–separation behavior. Axial tensile stress below the edge of indentation contact is found to be the largest contributor to damage initiation and evolution. Delamination results in a decrease in both indentation-derived hardness and Young's modulus. As a result, a unique finding is that delamination can occur during the unloading process of indentation, depending on the loading condition and critical tractions.

36 MATERIALS SCIENCE↗

THE DESIGN OF LAYER TIME OPTIMIZATION IN LARGE SCALE ADDITIVE MANUFACTURING WITH FIBER REINFORCED POLYMER COMPOSITES

In this study, we have developed a method to optimize a layer deposition time (a.k.a. layer time) for large-scale additive manufacturing (AM) via physics-based simulations. A long layer time leads to an over-cooled surface on which a new layer is deposited, and therefore, it may result in a weak bonding or debonding between layers, cracking, or warping. A short layer time leads to a high temperature of the structure due to insufficient cooling, and therefore, the structure may not be stiff enough and may collapse during manufacturing. Therefore, it is important to estimate the optimal layer time in additive manufacturing for a high-quality product. The temperature of a top layer right before deposition is recommended to be slightly higher than the glass temperature of the material. A temperature cooling was approximated to an exponential function of time, and the optimized layer time was obtained based on a target temperature while maintaining a minimal printing time. The material used is carbon fiber-reinforced polycarbonate (CF/PC), and the large-scale deposition system used is LSAM TM from Thermwood Corporation. Three different layer time cases were used for experiments, and a series of thermal images were obtained via an infra-red (IR) camera during the entire AM processes. AM process simulations were performed using a finite element method and the temperature profiles from the simulation were in good agreement with those from experiments. The layer time optimization was performed based on the temperature profiles from the simulations. A layer temperature with the optimal layer time was confirmed as the target temperature through simulation.

Jo, Eonyeon↗

Hydro-mechanical coupled modeling of hydraulic fracturing using the mesh fragmentation technique

The inclusion of special interface elements between standard finite elements is becoming a common technique to model discontinuities in porous media using the finite element method (FEM). Recently, it was proved that high aspect ratio (HAR) elements can reproduce very satisfactorily the main features of behavior observed in a single hydraulically-induced fracture. In this paper, the mesh fragmentation technique (MFT) is proposed to extend the application of HAR elements to simulate more general problems involving the formation of hydraulic fractures in rocks by introducing this type of element in-between the standard FE of a typical mesh. The proposed framework makes use of standard FE techniques. Therefore, it is relatively easy to upgrade an existing FE program for continuous porous media to deal with evolving discontinuities. The proposed approach is verified and validated against available analytical and numerical solutions. The crack patterns predicted by the MFT are also compared with the ones observed in the laboratory. The formation of multiple fractures is also analyzed. In all cases, the proposed technique was able to properly capture the main features of rock behavior subjected to hydraulic fracturing.

58 GEOSCIENCES↗

A Parametric, Data-Driven, Non-Intrusive Reduced-Order Model Framework for Crystal Plasticity Simulations of Voids

The influence of the internal structure at micrometer length scales on the deformation of polycrystalline materials can be effectively captured using crystal plasticity finite element methods (CPFEM). However, the complexity and nonlinearity of the deformation equations CPFEM solves demand significant computational power and resources to achieve accurate predictions, limiting its broader application. To address this challenge, we have identified a reduced-order representation of the complex data in order to establish a computationally efficient reduced-order models (ROM) and drastically reduce the computational expense of CPFEM. Specifically, in this work, we developed a parametric, data-driven, and non-intrusive ROM framework for CPFEM using proper orthogonal decomposition (POD) and sparse variational Gaussian process (SVGP) regression for single-crystal microstructures under tensile loading conditions. The developed protocol enables one to compress field into a latent/low-dimensional space described by principal component analysis (PCA) via the singular value decomposition (SVD) algorithm. As a result, the high-dimensional data are reduced to a significantly smaller amount of dimensions with POD bases and POD coefficients. Furthermore, we deployed an ensemble of SVGPs—extended from the classical Gaussian process (GP) regression for scalability and handling big data—in a massively parallel manner to train and predict latent POD coefficients using known POD bases from a set of previously obtained simulations results. Lastly, using the predicted POD coefficients, we reconstructed the full-field results and showed reasonable agreement compared with the true values obtained from running CPFEM. The developed framework is validated with a set of CPFEM simulations of a single embedded void in single-crystal aluminum alloy. While the framework is broadly applicable, this work specifically focuses on single-crystal microstructures, a single load case (e.g., tensile), and a specific void geometry (spherical).

Anisotropy↗

Finite-element-based simulations of electrodes for CO 2 cascade reduction reactions

The multielectron reduction of CO 2 to liquid fuels could be a path to scalable energy storage, but reaching this goal requires major advances in catalysis and systems engineering. Cascade catalysis, which couples sequential reactions without isolating intermediates, has emerged as a promising route to enhance selectivity and efficiency in CO 2 reduction (CO 2 R). In this review, we examine how finite-element-based simulations of continuum model [finite element method (FEM)] approaches are being used to analyze and guide CO 2 R cascade systems. We first outline the fundamentals of cascade catalysis and recent advances in catalytic materials (metallic, molecular, and hybrid architectures). We then focus on FEM developments at the electrode and device scales, emphasizing how these models capture transport phenomena, local microenvironments, and geometry-dependent effects. To clarify design principles, we present case studies of cascade electrodes organized in systems without and with integrated semiconductors. We further emphasize the integration of FEM with multiscale frameworks (density functional theory, molecular dynamics, kinetic Monte Carlo) and its role in bridging atomic-level insights with device-level performance. Finally, we identify current limitations and future prospects, including improved boundary conditions, coupling with operando experiments, and machine learning-accelerated model development. Together, these insights provide design principles for next-generation CO 2 R cascade systems for efficient solar fuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A sensitivity analysis of twinning crystal plasticity finite element model using single crystal and poly crystal Zircaloy

The popularity of crystal plasticity finite element method (CPFEM) models is increasing due to their ability to predict the mechanical response of crystalline materials such as metals and metal alloys more accurately than traditional continuum mechanics models. This is since the crystal plasticity models consider the effect of atomic structure, microstructural morphology, and properties of individual grains. These CPFEM models use a large number of material parameters in order to capture the mesoscale physics which comes with the downside of the tedious calibration process. In this paper, a CPFEM code was developed to include the twinning induced grain reorientation and subsequent crystallographic slip for HPC material. The developed code is incorporated in a large-scale, parallelized nonlinear solver WARP3D. Further, a sensitivity analysis with respect to 22 material parameters was then conducted using single crystal and polycrystal representative volume element (RVE) of Zircaloy material. Loading was applied along five different crystallographic orientations for single crystal RVE and along three directions namely, rolling (RD), transverse (TD), and normal (ND) direction for polycrystal RVE. Results obtained from the sensitivity analysis were used for the calibration of material parameters for Zircaloy. Finally, developed code along with calibrated material parameters was used to investigate the effect of the hydride phase formation in Zircaloy which is a typical case observed for nuclear applications. It was found that the volume fraction of the hydride phase has a significant impact on the mechanical properties of Zircaloy.

36 MATERIALS SCIENCE↗

Enhanced Performance of a Self-Powered Organic/Inorganic Photodetector by Pyro-Phototronic and Piezo-Phototronic Effects

Self-powered photodetectors (PDs) have long been realized by utilizing photovoltaic effect and their performances can be effectively enhanced by introducing the piezo-phototronic effect. Recently, a novel pyro-phototronic effect is invented as an alternative approach for performance enhancement of self-powered PDs. Here, a self-powered organic/inorganic PD is demonstrated and the influences of externally applied strain on the pyro-phototronic and the photovoltaic effects are thoroughly investigated. Under 325 nm 2.30 mW cm -2 UV illumination and at a -0.45% compressive strain, the PD's photocurrent is dramatically enhanced from ≈14.5 to ≈103 nA by combining the pyro-phototronic and piezo-phototronic effects together, showing a significant improvement of over 600%. Theoretical simulations have been carried out via the finite element method to propose the underlying working mechanism. Moreover, the pyro-phototronic effect can be introduced by applying a -0.45% compressive strain to greatly enhance the PD's response to 442 nm illumination, including photocurrent, rise time, and fall time. This work provides in-depth understandings about the pyro-phototronic and the piezo-phototronic effects on the performances of self-powered PD to light sources with different wavelengths and indicates huge potential of these two effects in optoelectronic devices.

36 MATERIALS SCIENCE↗

Momentum-Resolved Surface Enhanced Raman Scattering from a Nanowire-Nanoparticle Junction Cavity

Herein experimental evidence of directional surface enhanced Raman scattering from molecules situated inside a single nanowire–nanoparticle junction cavity is reported. The emission is confined to a narrow range of wavevectors perpendicular to the axis of the cavity. In addition to this, the molecules excite multiple guided modes of the nanowire which are imaged using leakage radiation Fourier microscopy. The emission wavevectors are further characterized as a function of output polarization. The excited guided modes of the wire show interesting polarization signatures. All the results are corroborated using finite element method based numerical simulations. Essentially, an important connection between gap-cavity enhanced Raman scattering and its directionality of emission is provided. The results may be relevant in understanding the cavity electrodynamics at the nanoscale and molecular coupling to extremely small gaps between a 1D and a 0D plasmonic nanostructure.

36 MATERIALS SCIENCE↗

Machine Learning for Thermal Transport Analysis of Aluminum Alloys with Precipitate Morphology

A large number of microstructural parameters and a wide range of transport physics impose challenges on thermal transport analysis of alloy. Herein, modern data science techniques are employed to overcome the challenges, pursuing effective calculation of thermal transport properties. This emerging approach is tested for precipitate-hardened aluminum (Al) alloy with consideration of precipitate morphology. The finite element method (FEM) is employed to create a database of effective thermal conductivity of hypothetical Al alloys with varying precipitate morphological and thermal transport features. Using the FEM-generated data sets, the correlation analysis is conducted to qualitatively evaluate the importance of various precipitate features. The correlation analysis identifies the surface area, average diameter, and volume fraction of precipitates as the most descriptive features for determining the thermal conductivity of alloys. Afterward machine learning (ML) models are trained to accurately predict the effective thermal conductivity. Comparing the ML predictions with effective thermal conductivity and microstructural information from experiments, precipitate thermal transport properties can be calculated, such as interfacial conductance between Al matrix and precipitate, without atomistic simulations. This research demonstrates the feasibility of data-driven approaches for effective thermal transport calculation and the promise of the FEM-generated data analysis for more comprehensive evaluation of metallic alloys.

36 MATERIALS SCIENCE↗

Reduced-order modeling for nonlocal diffusion problems

In several settings, diffusive behavior is observed to not follow the rate of spread predicted by parabolic partial differential equations (PDEs) such as the heat equation. Such behaviors, often referred to as anomalous diffusion, can be modeled using nonlocal equations for which points at a finite distance apart can interact. An example of such models is provided by fractional derivative equations. Because of the nonlocal interactions, discretized nonlocal systems have less sparsity, often significantly less, compared with corresponding discretized PDE systems. As such, the need for reduced-order surrogates that can be used to cheaply determine approximate solutions is much more acute for nonlocal models compared with that for PDEs. In this paper, we consider the construction, application, and testing of proper orthogonal decomposition (POD) reduced models for an integral equation model for nonlocal diffusion. For certain modeling parameters, the model we consider allows for discontinuous solutions and includes fractional Laplacian kernels as a special case. Preliminary computational results illustrate the potential of using POD to obtain accurate approximations of solutions of nonlocal diffusion equations at much lower costs compared with, for example, standard finite element methods. Copyright © 2016 John Wiley & Sons, Ltd.

97 MATHEMATICS AND COMPUTING↗

Sensitivity analysis of a layered piezoelectric system using ZFEM

The complex variable finite element method (ZFEM) is a numerical technique which aims to find the partial derivatives of the independent variables with respect to variation in dependent parameters declared in the physics. This is done by combining the complex Taylor series expansion within the weak formulation of the governing equation in a coupled system of linear equations forming a complex valued block matrix given by the Cauchy–Riemann matrix representation. In this work, two-dimensional linear first-order elements have been implemented in ZFEM to predict the design derivatives of the mechanical displacement field and the voltage potential field for a layered piezoelectric system in a steady-state study with Dirichlet boundary condition applied at the top and bottom edges of the geometry. This approach allows the standard FEM solution to quantify the sensitivity of the mechanical displacement and voltage potential fields with respect to small variations in the material properties through the information obtained from the computation of the derivatives. The domain is formed by a layered body with PZT-4 and PZT-5 stacked together. For result verification, the numerical solution obtained with ZFEM was compared to results from a commercial FEM package and the solution from the imaginary part was compared to the exact solution of a well-known benchmark problem. In conclusion, comparison of the results showed good agreement for both the real and imaginary parts of the solution and the largest sensitivities were found in PZT-5 specifically in C 13 , C 33 , and ε 33 .

42 ENGINEERING↗

A fully coupled two-level Schwarz preconditioner based on smoothed aggregation for the transient multigroup neutron diffusion equations

The neutron multigroup diffusion equations is an important approximation of the neutron transport equation, and has been widely used for studying the motion of neutrons and their interactions with the stationary background materials. Solving the multigroup diffusion equations faces challenging because many variables are coupled together and a lot of computing resources are required. In this paper, we focus on the development of a scalable parallel algorithm framework for the system of equations arising from the discretization of the multigroup diffusion equations using a finite element method in space and using an implicit scheme in time. The parallel agorithm framweork consists of an inexact Jacobian-free Newton for the nonlinear equations, a Krylov subspace method for the Jacobian system and a parallel Schwarz preconditioner for the acceleration of the algorithm convergence. A coarse space based on smoothed aggregation is introduced to construct a two-level method to improve the parallel performance of the Schwarz preconditioner. We numerically shown that compared with the one-level method, the proposed two-level method works significantly better in terms of the number of linear iterations and the compute time for a system of equations with millions of unknowns and a supercomputer with thousands of processors.

97 MATHEMATICS AND COMPUTING↗

Shape optimization using a NURBS-based interface-enriched generalized FEM

This study presents a gradient-based shape optimization over a fixed mesh using a non-uniform rational B-splines-based interface-enriched generalized finite element method, applicable to multi-material structures. In the proposed method, non-uniform rational B-splines are used to parameterize the design geometry precisely and compactly by a small number of design variables. An analytical shape sensitivity analysis is developed to compute derivatives of the objective and constraint functions with respect to the design variables. Subtle but important new terms involve the sensitivity of shape functions and their spatial derivatives. As a result, verification and illustrative problems are solved to demonstrate the precision and capability of the method.

42 ENGINEERING↗

A robust interface finite element formulation for modeling brittle material failure problems

Abstract Failure of many brittle materials and structures can be modeled using interface‐oriented finite elements combined with intrinsic cohesive zone models. The discontinuous Galerkin (DG) finite element method provides an innovative framework for modeling brittle crack propagation with zero‐thickness interface elements, which can accommodate extrinsic cohesive laws to avoid the artificial compliance required in intrinsic cohesive models. However, robust formulations and implementations of DG methods are critical in alleviating the well‐known convergence issues for both crack nucleation and propagation with reduced instability. This paper presents a robust interface element formulation by modifying the incomplete interior penalty Galerkin (IIPG) method, which successfully avoids the initial element interface penetration across elements that occurs prior to crack nucleation, and thereby greatly reduces the instability issue as cracks open. We further verified and validated our implementation by using a bar tension test and a beam fracturing benchmark. The robustness of our proposed interface element method was demonstrated by a micromechanics fiber/matrix debonding problem with 64 fibers embedded in a bulk matrix.

Liu, Ruijie↗

Development of a P 2 element with optimal L 2 convergence for biharmonic equation

It is well known that convergence rate of finite element approximation is suboptimal in the L 2 norm for solving biharmonic equations when P 2 or Q 2 element is used. The goal of this paper is to derive a weak Galerkin (WG) P 2 element with the L 2 optimal convergence rate by assuming the exact solution sufficiently smooth. In addition, our new WG finite element method can be applied to general mesh such as hybrid mesh, polygonal mesh or mesh with hanging node. The numerical experiments have been conducted on different meshes including hybrid meshes with mixed of pentagon and rectangle and mixed of hexagon and triangle.

Mu, Lin↗

A Poisson–Nernst–Planck Model of Ion Transport and Interface Segregation in Metal–Insulator–Semiconductor Structures and Solar Cells

A numerical model that describes the transport of mobile ionic species in metal–insulator–semiconductor (MIS) and photovoltaic (PV) devices subject to temperature and voltage stress is presented. The finite element method (FEM) is used to solve the Nernst–Planck equation while imposing Poisson's equation self-consistently as a restriction for the electrostatic potential. This allows the contribution of the ionic species to the potential to be taken into account. Using a variational formulation eases the implementation of diverse boundary conditions, including the incorporation of segregation kinetics at the device interfaces. Segregation across the dielectric–semiconductor interface is relevant to modeling the electronic device degradation in systems where contamination reaches the semiconductor. The model in closed systems with no-flux boundary conditions is validated first. In the limiting case of low contamination levels with respect to the gate bias, the FEM solution matches analytically derived approximations. Then, the implementation is broadened to include an open boundary at the dielectric–semiconductor interface to account for leakage of ions. The predicted time dependence of the flatband voltage in Na-contaminated MIS test structures agrees well with measurements. This model successfully captures the role of long-range ion transport at concentrations of relevance to electronic and PV device instability and neuromorphic computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗