Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Rapid Radiochemical Analyses in Support of Fukushima Nuclear Accident - 13196

There is an increasing need to develop faster analytical methods for emergency response, including emergency soil and air filter samples [1, 2]. The Savannah River National Laboratory (SRNL) performed analyses on samples received from Japan in April, 2011 as part of a U.S. Department of Energy effort to provide assistance to the government of Japan, following the nuclear event at Fukushima Daiichi, resulting from the earthquake and tsunami on March 11, 2011. Of particular concern was whether it was safe to plant rice in certain areas (prefectures) near Fukushima. The primary objectives of the sample collection, sample analysis, and data assessment teams were to evaluate personnel exposure hazards, identify the nuclear power plant radiological source term and plume deposition, and assist the government of Japan in assessing any environmental and agricultural impacts associated with the nuclear event. SRNL analyzed approximately 250 samples and reported approximately 500 analytical method determinations. Samples included soil from farmland surrounding the Fukushima reactors and air monitoring samples of national interest, including those collected at the U.S. Embassy and American military bases. Samples were analyzed for a wide range of radionuclides, including strontium-89, strontium-90, gamma-emitting radionuclides, and plutonium, uranium, americium and curium isotopes. Technical aspects of the rapid soil and air filter analyses will be described. The extent of radiostrontium contamination was a significant concern. For {sup 89,90}Sr analyses on soil samples, a rapid fusion technique using 1.5 gram soil aliquots to enable a Minimum Detectable Activity (MDA) of <1 pCi {sup 89,90}Sr /g of soil was employed. This sequential technique has been published recently by this laboratory for actinides and radiostrontium in soil and vegetation [3, 4]. It consists of a rapid sodium hydroxide fusion, pre-concentration steps using iron hydroxide and calcium fluoride precipitations, followed by Sr-Resin separation and gas flow proportional counting. To achieve a lower detection limit for analysis of some of the Japanese soil samples, a 10 gram aliquot of soil was taken, acid-leached and processed with similar preconcentration chemistry. The MDA using this approach was ∼0.03 pCi/g (1.1 mBq/g)/, which is less than the 0.05-0.10 pCi/g {sup 90}Sr levels found in soil as a result of global fallout. The chemical yields observed for the Japanese soil samples was typically 75-80% and the laboratory control sample (LCS) and matrix spike (MS) results looked very good for this work Individual QC results were well within the ± 25% acceptable range and the average of these results does not show significant bias. Additional data for a radiostrontium in soil method for 50 gram samples will also be presented, which appears to be a significant step forward based on looking at the current literature, with higher chemical yields for even larger sample aliquots and lower MDA [5, 6, 7] Hou et al surveyed a wide range of separation methods for Pu in waters and environmental solid samples [8]. While there are many actinide methods in the scientific literature, few would be considered rapid due to the tedious and time-consuming steps involved. For actinide analyses in soil, a new rapid method for the determination of actinide isotopes in soil samples using both alpha spectrometry and inductively-coupled plasma mass spectrometry was employed. The new rapid soil method utilizes an acid leaching method, iron/titanium hydroxide precipitation, a lanthanum fluoride soil matrix removal step, and a rapid column separation process with TEVA Resin. The large soil matrix is removed easily and rapidly using these two simple precipitations with high chemical recoveries and effective removal of interferences. [9, 10] Vacuum box technology and rapid flow rates were used to reduce analytical time. Challenges associated with the mineral content in the volcanic soil will be discussed. Air filter samples were reported within twenty-four (24) hours of receipt using rapid techniques published previously. [11] The rapid reporting of high quality analytical data arranged through the U.S. Department of Energy Consequence Management Home Team was critical to allow the government of Japan to readily evaluate radiological impacts from the nuclear reactor incident to both personnel and the environment. SRNL employed unique rapid methods capability for radionuclides to support Japan that can also be applied to environmental, bioassay and waste management samples. New rapid radiochemical techniques for radionuclides in soil and other environmental matrices as well as some of the unique challenges associated with this work will be presented that can be used for application to environmental monitoring, environmental remediation, decommissioning and decontamination activities. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

RAPID SEPARATION METHOD FOR ACTINIDES IN EMERGENCY SOIL SAMPLES

A new rapid method for the determination of actinides in soil and sediment samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for samples up to 2 grams in emergency response situations. The actinides in soil method utilizes a rapid sodium hydroxide fusion method, a lanthanum fluoride soil matrix removal step, and a streamlined column separation process with stacked TEVA, TRU and DGA Resin cartridges. Lanthanum was separated rapidly and effectively from Am and Cm on DGA Resin. Vacuum box technology and rapid flow rates are used to reduce analytical time. Alpha sources are prepared using cerium fluoride microprecipitation for counting by alpha spectrometry. The method showed high chemical recoveries and effective removal of interferences. This new procedure was applied to emergency soil samples received in the NRIP Emergency Response exercise administered by the National Institute for Standards and Technology (NIST) in April, 2009. The actinides in soil results were reported within 4-5 hours with excellent quality.

54 ENVIRONMENTAL SCIENCES↗

Revealing the Roles of CuF 2 /NiF 2 Incorporation in the Electrochemical Performance of FeF 3 Cathodes in Solid‐State Batteries

Mixed metal fluorides have been considered as a promising candidate to lower the voltage hysteresis of conversion-type iron fluoride cathodes, but their cycling stability is limited due to transition metal dissolution and interphase growth in liquid electrolyte batteries. Here, we study the role of incorporating CuF 2 and NiF 2 in the electrochemical performance of FeF 3 cathode in halide-based solid-state batteries to test whether we can transfer the kinetic benefit of low voltage hysteresis to solid-state batteries while using solid electrolyte to eliminate transition metal dissolution and stabilize the interphase. Synchrotron X-ray absorption spectroscopy results indicated the redox reactions are attributed to Cu 0 /Cu + and Fe 0 /Fe 2+ in 25CuF 2 -75FeF 3 and Ni 0 /Ni 2+ and Fe 0 /Fe 3+ in 10NiF 2 -90FeF 3 . While no apparent improvement in electrode kinetics can be observed, the incorporation of CuF 2 and NiF 2 can largely improve the cycling stability of FeF 3 cathodes. In conclusion, the results demonstrate the advantages of using solid-state concept to improve the cycling stability of conversion-type cathodes.

25 ENERGY STORAGE↗

On the Conversion of Bauxite Ores to Highly Activated Alumina Media for Water Remediation

Good quality drinking water is necessary to maintain a high quality of life. Millions lack access to clean and safe drinking water, and current trends suggest that billions will face acute water shortages in the coming decades. Development of new materials has led to technological impacts on water purification, from desalination membranes to atmospheric water scavenging. However, the most challenging aspect of technological solutions is cost: if the community being serviced cannot afford the solution, it is not likely to be sustainable. Repurposing Earth-abundant materials to replace highly engineered solutions is an atractive solution. Herein, minimal processing of bauxite rocks produces a high-porosity and reactive activated alumina in situ, without purification directly from the ore. This acid-treated, thermally activated bauxite (ATAB) exhibits a high surface area of 401 ± 6 m 2 g -1 , a 40-fold increase relative to its parent ore, and a 2× increase relative to the state-of-the-art fluoride adsorbent, activated alumina. The composition, preparation, and mechanism of adsorption are studied by X-ray diffraction, X-ray photoelectron spectroscopy, and multiple-quantum magic-angle spinning 27 Al nuclear magnetic resonance (NMR). Finally, the maximum adsorption density of ATAB is comparable with that of activated alumina, but ATAB requires fewer processing steps, thus warranting future consideration as a primary adsorbent of choice for fluoride removal from water.

36 MATERIALS SCIENCE↗

Lithium Insertion Mechanism in Iron‐Based Oxyfluorides with Anionic Vacancies Probed by PDF Analysis

Abstract The mechanism of lithium insertion that occurs in an iron oxyfluoride sample with a hexagonal–tungsten–bronze (HTB)‐type structure was investigated by the pair distribution function. This study reveals that upon lithiation, the HTB framework collapses to yield disordered rutile and rock salt phases followed by a conversion reaction of the fluoride phase toward lithium fluoride and nanometer‐sized metallic iron. The occurrence of anionic vacancies in the pristine framework was shown to strongly impact the electrochemical activity, that is, the reversible capacity scales with the content of anionic vacancies. Similar to FeOF‐type electrodes, upon de‐lithiation, a disordered rutile phase forms, showing that the anionic chemistry dictates the atomic arrangement of the re‐oxidized phase. Finally, it was shown that the nanoscaling and structural rearrangement induced by the conversion reaction allow the in situ formation of new electrode materials with enhanced electrochemical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phenomena Identification and Ranking Table (PIRT) study for metallic structural materials for advanced High-Temperature reactor

The Fluoride High-Temperature Reactor (FHR) technology promises many benefits including passive safety, proliferation-resistant waste forms, and improved economics. However, selection of reliable structural materials and identification of the possible degradation mechanisms for these is important for the licensure and the safe operation of FHRs. In order to address this task, the Georgia Tech led Integrated Research Project (IRP) hosted a Phenomena Identification and Ranking Table (PIRT) panel of experts to address degradation mechanisms and other materials related issues of importance to the FHRs. Futhermore, materials, ones that come in contact with FLiBe or FLiNaK molten salts or other related environments like high temperature steam etc., were considered in this PIRT. Focus of this PIRT was the metallic alloys, especially the ones that are permitted for the construction of elevated temperature Class A components by the ASME code. Degradation mechanisms considered in this PIRT included chemical degradation, mechanical degradation, radiation degradation, and synergistic effect of these mechanisms that may negatively impact operations or cause some safety concerns for the major structural components of FHRs. Main components which were considered included vessel and primary piping, primary heat exchangers, steam generator vessel, steam generator tubes, intermediate loop piping, valves and pumps. Welds in all structural components were identified as an important class of material, which varies in composition and properties, and needs more attention. Importance of impurity control in molten fluorides considered for FHR was highlighted throughout PIRT panel discussions. As a result, this paper gives a summary of important results from the PIRT panel discussions and report.

36 MATERIALS SCIENCE↗

Environmental exposure to arsenic and chromium in children is associated with kidney injury molecule-1

Environmental hazards from natural or anthropological sources are widespread, especially in the north-central region of Mexico. Children represent a susceptible population due to their unique routes of exposure and special vulnerabilities. In this study we evaluated the association of exposure to environmental kidney toxicants with kidney injury biomarkers in children living in San Luis Potosi (SLP), Mexico. A cross-sectional study was conducted with 83 children (5–12 years of age) residents of Villa de Reyes, SLP. Exposure to arsenic, cadmium, chromium, fluoride and lead was assessed in urine, blood and drinking water samples. Almost all tap and well water samples had levels of arsenic (81.5%) and fluoride (100%) above the permissible levels recommended by the World Health Organization. Mean urine arsenic (45.6 ppb) and chromium (61.7 ppb) were higher than the biological exposure index, a reference value in occupational settings. Using multivariate adjusted models, we found a dose-dependent association between kidney injury molecule-1 (KIM-1) across chromium exposure tertiles [(T1: reference, T2: 467 pg/mL; T3: 615 pg/mL) (p-trend=0.001)]. Chromium upper tertile was also associated with higher urinary miR-200c (500 copies/μl) and miR-423 (189 copies/μL). Arsenic upper tertile was also associated with higher urinary KIM-1 (372 pg/mL). Other kidney injury/functional biomarkers such as serum creatinine, glomerular filtration rate, albuminuria, neutrophil gelatinase-associated lipocalin and miR-21 did not show any association with arsenic, chromium or any of the other toxicants evaluated. We conclude that KIM-1 might serve as a sensitive biomarker to screen children for kidney damage induced by environmental toxic agents. - Highlights: • Children living in Mexico had exceedingly high arsenic and chromium exposure. • Arsenic and chromium exposure was significantly associated with urinary KIM-1. • KIM-1 might serve as a sensitive biomarker to evaluate kidney injury in children.

54 ENVIRONMENTAL SCIENCES↗

Control of molten salt corrosion of fusion structural materials by metallic beryllium

A series of tests have been performed between 2001 and 2006 at the Safety and Tritium Applied Research facility of the Idaho National Laboratory to demonstrate chemical compatibility between the molten salt flibe (2LiF+BeF2 in moles) and fusion structural materials once suitable fluoride potential control methods are established. The tests adopted metallic beryllium contact as main fluoride potential control, and the results have been published in recent years. A further step was to expose two specimens of low activation ferritic/martensitic steel 9Cr-2W to static corrosion tests that include an active corrosion agent (hydrofluoric gas) in controlled conditions at 530 C, and the results of the tests are presented in this paper. The results confirmed the expected correlation of the HF recovery with the concentration of metallic impurities dissolved in the salt because of specimen corrosion. The metals concentration dropped to level close to the detectable limit when the beryllium rod was inserted and increased once the content of excess beryllium in the system had been consumed by HF reduction and specimens corrosion progressed. Metallographic analysis of the samples after 500 hours exposure in reactive conditions showed evidence of the formation of unstable chromium oxide layers on the specimens surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Centrosymmetric [N(CH{sub 3}){sub 4}]{sub 2}TiF{sub 6} vs. noncentrosymmetric polar [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6}: A hydrogen-bonding effect on the out-of-center distortion of TiF{sub 6} octahedra

The syntheses, structures, and characterization of organically templated zero-dimensional titanium fluoride materials, A{sub 2}TiF{sub 6} (A=[N(CH{sub 3}){sub 4}] or [C(NH{sub 2}){sub 3}]), are reported. Phase pure samples of A{sub 2}TiF{sub 6} were synthesized by either solvothermal reaction method or a simple mixing method. While [N(CH{sub 3}){sub 4}]{sub 2}TiF{sub 6} crystallizes in a centrosymmetric space group, R-3, [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} crystallizes in a noncentrosymmetric polar space group, Cm. The asymmetric out-of-center distortion of TiF{sub 6} octahedra in polar [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} are attributable to the hydrogen-bonding interactions between the fluorine atoms in TiF{sub 6} octahedra and the nitrogen atoms in the [C(NH{sub 2}){sub 3}]{sup +} cation. Powder second-harmonic generation (SHG) measurements on the [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6}, using 1064 nm radiation, indicate the material has SHG efficiency of 25 Multiplication-Sign that of {alpha}-SiO{sub 2}, which indicates an average nonlinear optical susceptibility, Left-Pointing-Angle-Bracket d{sub eff} Right-Pointing-Angle-Bracket {sub exp} of 2.8 pm/V. Additional SHG measurements reveal that the material is not phase-matchable (Type 1). The magnitudes of out-of-center distortions and dipole moment calculations for TiF{sub 6} octahedra will be also reported. - Graphical abstract: The out-of-center distortion of TiF{sub 6} octahedron in the polar noncentrosymmetric [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} is attributable to the hydrogen-bonding interactions between the F in TiF{sub 6} octahedron and the H-N in the [C(NH{sub 2}){sub 3}]{sup +}. Highlights: Black-Right-Pointing-Pointer Two titanium fluorides materials have been synthesized in high yields. Black-Right-Pointing-Pointer Hydrogen-bonds are crucial for the out-of-center distortion of TiF{sub 6} octahedra. Black-Right-Pointing-Pointer [C(NH{sub 2}){sub 3}]{sub 2}TiF{sub 6} has a SHG efficiency of 25 Multiplication-Sign that of {alpha}-SiO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural and magnetic characterisation of the fluorinated compound 15R-BaFeO{sub 2}F

The compounds 15R-BaFeO{sub 2}F and 15R-BaFeO{sub 2.27}F{sub 0.5} have been synthesised by the low temperature fluorination of 15R-BaFeO{sub 3−d}F{sub 0.2} using polyvinylidenedifluoride (PVDF) as a fluorination agent. The materials have been structurally characterised by Rietveld analysis of the X-ray- and HRPD-powder neutron diffraction data. A detailed analysis of bond valence sums suggests that the oxide and fluoride ions order on the different anion sites. A reinvestigation of our recently published structure (Clemens et al., 2013) [34] of 6H-BaFeO{sub 2}F is also reported and incorporation of fluoride in h-type layers is also confirmed in this compound. The magnetic moments for 15R-BaFeO{sub 2}F and 15R-BaFeO{sub 2.25}F{sub 0.5} align in the a/b-plane with antiferromagnetic alignment of the moments between adjacent layers, and are flipped by 90° as compared to the precursor compound. 15R-BaFeO{sub 2}F exhibits very robust antiferromagnetism with a Néel temperature between 300 and 400 °C. - Graphical abstract: The crystal and magnetic structure of the perovskite phase 15R-BaFeO{sub 2}F. - Highlights: • 15R-BaFeO{sub 2}F and 15R-BaFeO{sub 2.27}F{sub 0.5}were prepared via low temperature fluorination using PVDF. • A structural investigation of the compounds BaFeO{sub 2}F is presented in detail. • This analysis suggests ordering of O{sup 2−} and F{sup −} anions between different layers. • 15R-BaFeO{sub 2}F shows antiferromagnetic ordering at 300 K with T{sub N} ∼300–400 °C. • The magnetic moments align in the a/b-plane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of metastable tetragonal zirconia nanoparticles: Competitive influence of the dopants and surface state

The effect of the surface modification of the nanoparticles of amorphous and crystalline partially stabilized zirconia by fluoride ions on stability of the metastable tetragonal phase was investigated. Based on the DSC, titrimetry and FTIR spectroscopy data it was proven that surface modification of the xerogel resulted from an exchange of the fluoride ions with the basic OH groups. The effect of the powder pre-calcination temperature before modification on the formation of metastable tetragonal phase in partially stabilized zirconia was investigated. It was shown that the main factor of tetragonal zirconia stabilization is the state of nanoparticles surface at pre-crystallization temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic-liquid-assisted synthesis of YF{sub 3} with different crystalline phases and morphologies

YF{sub 3} with different crystalline phases and morphologies have been prepared via a facile hydrothermal route assisted by imidazolium ionic liquids 1-butyl-3-methylimidazolium tetrafluoroborate (C{sub 4}mimBF{sub 4}) or 1-butyl-3-methylimidazolium hexafluorophosphate (C{sub 4}mimPF{sub 6}). The microstructures and morphologies of YF{sub 3} particles were characterized by X-ray powder diffraction, X-ray photoelectron spectra (XPS), transmission electron microscopy (TEM), high resolution electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM). Cubic and orthorhombic YF{sub 3} were selectively synthesized by adjusting the molar ratio of the reagents and using C{sub 4}mimBF{sub 4} as the fluoride source, while only orthorhombic YF{sub 3} was obtained using C{sub 4}mimPF{sub 6}, indicating that the crystalline phases and morphologies of the products were significantly influenced by fluoride source and reaction media.

36 MATERIALS SCIENCE↗

Increased radiative lifetime of Tm{sup 3+}:{sup 3}F{sub 4} → {sup 3}H{sub 6} transition in oxyfluoride tellurite glasses

Highlights: • We prepare Tm{sup 3+}-doped tellurite-zinc glasses with F{sup −} substitution. • Thermal stability becomes better with increasing F{sup −} in present glasses. • Tm{sup 3+} 1.8 μm radiative lifetime increases with F{sup −} concentration. • The origin of the increased lifetime has been discussed. - Abstract: The 1.8 μm emission properties of Tm{sup 3+}-doped zinc tellurite glasses modified by the substitution of ZnF{sub 2} are investigated in this paper. The thermal stability, Raman and phonon sideband spectra, transmission and absorption spectra, emission spectra and decay curves are discussed. It is found that substitution of fluoride ions into the zinc tellurite matrix produces dramatic increase in the emission lifetime of Tm{sup 3+} 1.8 μm emission. Absorption, Raman and phonon sideband spectra are used to estimate the local structure of Tm{sup 3+} ions. These analyses indicate structural change around Tm{sup 3+} ions caused by substitution of fluoride ions monitors the increased intrinsic radiative lifetimes. An increase in the measured radiative lifetimes of the Tm{sup 3+}:{sup 3}F{sub 4} → {sup 3}H{sub 6} transition is observed. The origin has been discussed and the reduction of OH{sup −} absorption, decrease of maximum phonon energy and phonon density are considered to be dominant in all of the nonradiative relaxations.

36 MATERIALS SCIENCE↗

Photon up-conversion production in Tb{sup 3+}–Yb{sup 3+} co-doped CaF{sub 2} phosphors prepared by combustion synthesis

Graphical abstract: Up-conversion luminescence from Tb{sup 3+} obtained by energy transfer from Yb{sup 3+} pairs in CaF{sub 2} powder prepared by combustion synthesis. - Highlights: • Calcium fluoride (CaF{sub 2}) powders were prepared by combustion synthesis. • Rare-earth ions doped in this material were found in interstitial sites. • Cooperative up-conversion was observed in Tb{sup 3+}:Yb{sup 3+}:CaF{sub 2} powder. • Energy transfer between Tb{sup 3+} and pairs of Yb{sup 3+} was analyzed using rate equations. - Abstract: Calcium fluoride (CaF{sub 2}) crystalline powders were successfully prepared by the combustion synthesis method. The powder material containing luminescent rare-earth ions, more specifically terbium (Tb{sup 3+}) and ytterbium (Yb{sup 3+}), was studied by X-ray diffraction, scanning electronic microscopy and optical spectroscopy. These ions are allocated in charge compensated interstitial positions of tetragonal (C{sub 4v}) and trigonal (C{sub 3v}) symmetry sites of the cubic (O{sub h}) CaF{sub 2} lattice. Up-conversion (UC) luminescence in Tb{sup 3+} was achieved using a low power diode laser operating at 975 nm. Tb{sup 3+} is insensitive to near-infrared radiation but UC can be achieved via energy transfer from pairs of Yb{sup 3+} ions to Tb{sup 3+} ions. The UC luminescence dynamics of Tb{sup 3+} was used to study the energy transfer mechanism.

36 MATERIALS SCIENCE↗

A novel elaboration for various morphologies of three-layer TiO2 nanotubes by oxygen bubble mould

Highlights: • Three-layer TiO{sub 2} nanotubes with different morphologies were fabricated. • Some cavities inside middle barrier layer were observed for the first time. • Conventional three-stage current-time curves were transformed into four-stage curves. • Growing process of the three-layer nanotubes was explored systematically. - Abstract: A special three-layer TiO{sub 2} nanotube array has been successfully fabricated. The upper and lower porous layers were formed in the same fluoride-containing electrolyte, while the middle barrier layer was formed in fluoride-free electrolyte. By changing the applied voltage of middle barrier layer, the growth process of the lower layer was explored and compared systematically. The results show that at a critical voltage of barrier layer, the lower layer could barely be seen. Below the critical voltage, complete three-layer TiO{sub 2} nanotubes were achieved, but above the critical voltage, the lower layer failed to appear. Furthermore, some cavities inside the barrier layer were obtained under higher voltage of barrier layer and the conventional three-stage current-time curves were transformed into four-stage curves. Based on the oxygen bubble mould and electronic current model, an explanation for the formation of cavities is firstly proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

New insight into UO 2 F 2 particulate structure by micro-Raman spectroscopy

Uranyl fluoride particles produced via hydrolysis of uranium hexafluoride have been deposited on different substrates: polished graphite disks, silver foil, stainless steel and gold-coated silicon wafer, and measured with micro-Raman spectroscopy (MRS). All three metallic substrates enhanced the Raman signal delivered by UO 2 F 2 in comparison to graphite. The fundamental stretching of the U–O band appeared at 867 cm –1 in case of the graphite substrate, while in case of the others it was shifted to lower frequencies (down to 839 cm –1 ). All applied metallic substrates showed the expected effect of Raman signal enhancement; however the gold layer appeared to be most effective. Lastly, application of new substrates provides more information on the molecular structure of uranyl fluoride precipitation, which is interesting for nuclear safeguards and nuclear environmental analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Biotransformation of 2,3,3,3-tetrafluoropropene (HFO-1234yf) in rabbits

2,3,3,3-Tetrafluoropropene (HFO-1234yf) is a non-ozone-depleting fluorocarbon replacement with a low global warming potential and is developed as refrigerant. Due to lethality observed after high concentration inhalation exposures of HFO-1234yf in a developmental toxicity study with rabbits, the biotransformation of HFO-1234yf was investigated in this species. Female New Zealand White rabbits were exposed to air containing 2000; 10,000; or 50,000 ppm (n = 3/concentration) HFO234yf. All inhalation exposures were conducted for 6 h in a dynamic exposure chamber. Animals were individually housed in metabolic cages after the end of the exposures and urines were collected at 12 h intervals for 60 h. For metabolite identification, urine samples were analyzed by {sup 1}H-coupled and {sup 1}H-decoupled {sup 19}F-NMR and by LC/MS-MS or GC/MS. Metabolites were identified by {sup 19}F-NMR chemical shifts, signal multiplicity, {sup 1}H-{sup 19}F coupling constants and by comparison with synthetic reference compounds. In urine samples of rabbits exposed to 2000; 10,000; or 50,000 ppm HFO-1234yf, the predominant metabolite was N-acetyl-S-(3,3,3-trifluoro-2-hydroxypropanyl)-L-cysteine and accounted for app. 48% of total {sup 19}F-NMR signal intensities. S-(3,3,3-Trifluoro-2-hydroxypropanyl)mercaptolactic acid, 3,3,3-trifluoro-1,2-dihydroxypropane, 3,3,3-trifluoro-2-propanol and inorganic fluoride were also present as urinary metabolites. In incubations of rabbit liver S9 fractions containing glutathione, NADPH and HFO-1234yf, 3,3,3-trifluoro-1,2-dihydroxypropane, S-(3,3,3-trifluoro-2-hydroxypropanyl)glutathione, 3,3,3-trifluoro-2-propanol and inorganic fluoride were identified as metabolites of HFO-1234yf by {sup 19}F-NMR. The quantity of recovered metabolites in urine suggest a low extent (< 0.1% of dose received) of biotransformation of HFO-1234yf in rabbits, and 95% of all metabolites were excreted within 12 h after the end of the exposures (t{sub 1/2} app. 9.5 h). The obtained results indicate that HFO-1234yf is metabolized in rabbits by a CYP450-mediated epoxidation at low rates and glutathione conjugation of the epoxide. The differences in urinary metabolite patterns between rats and rabbits seen with HFO-1234yf are likely due to species-specific processing of glutathione S-conjugates. Rabbits also show a larger extent of biotransformation of HFO-1234yf.

60 APPLIED LIFE SCIENCES↗