Interfacial electronic structure at the CH{sub 3}NH{sub 3}PbI{sub 3}/MoO{sub x} interface
Interfacial electronic properties of the CH{sub 3}NH{sub 3}PbI{sub 3} (MAPbI{sub 3})/MoO{sub x} interface are investigated using ultraviolet photoemission spectroscopy and X-ray photoemission spectroscopy. It is found that the pristine MAPbI{sub 3} film coated onto the substrate of poly (3,4-ethylenedioxythiophene) poly(styrenesulfonate)/indium tin oxide by two-step method behaves as an n-type semiconductor, with a band gap of ∼1.7 eV and a valence band edge of 1.40 eV below the Fermi energy (E{sub F}). With the MoO{sub x} deposition of 64 Å upon MAPbI{sub 3}, the energy levels of MAPbI{sub 3} shift toward higher binding energy by 0.25 eV due to electron transfer from MAPbI{sub 3} to MoO{sub x}. Its conduction band edge is observed to almost pin to the E{sub F}, indicating a significant enhancement of conductivity. Meanwhile, the energy levels of MoO{sub x} shift toward lower binding energy by ∼0.30 eV, and an interface dipole of 2.13 eV is observed at the interface of MAPbI{sub 3}/MoO{sub x}. Most importantly, the chemical reaction taking place at this interface results in unfavorable interface energy level alignment for hole extraction. A potential barrier of ∼1.36 eV observed for hole transport will impede the hole extraction from MAPbI{sub 3} to MoO{sub x}. On the other hand, a potential barrier of ∼0.14 eV for electron extraction is too small to efficiently suppress electrons extracted from MAPbI{sub 3} to MoO{sub x}. Therefore, such an interface is not an ideal choice for hole extraction in organic photovoltaic devices.