Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ejecta”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

An upper limit for the flux of interstellar dust grains in the solar system

Data from the LEAM (Lunar Ejecta and Meteorite experiment, a micrometeorite detector at the Apollo 17 landing site) have been examined for evidence of interstellar (IS) dust grains traversing the solar system. The analysis technique considers IS grains approaching the solar system from the local solar apex. A model calculates the grains' hyperbolic orbits into the solar system and predicts the impact directions on the moon. The observations are then compared with the predicted impact directions to measure the IS dust flux. No evidence has been found (at the 97.5% confidence level) for a flux greater than about 6 hundred-thousandths per sq m/sec for particles of at least 2 by 10 to the -14th power g.

Tomandl, D. A.↗

Origin of magnetization in lunar breccias - An example of thermal overprinting

Twenty six samples from seven hand specimens, collected from the station 6 boulder at the Apollo 17 landing site, were studied magnetically. The boulder is a breccia consisting of three lithologic units distinguished by their clast population. The direction of magnetization of samples from unit B which is almost devoid of large clasts cluster fairly well after alternating field demagnetization. Samples from unit C which is characterized by abundant large clasts up to 1 m in size do not contain a uniform direction of magnetization but the distribution is not random. Based on these data we propose that the natural remanent magnetization (NRM) in these breccias is the vector sum of two magnetizations, a pre-impact magnetization and a partial thermoremanence acquired during breccia formation. The relative contribution of the two components is controlled by the thermal history of the ejecta, which in turn is determined by its clast population. Depending on the clast population, the NRM can be a total thermoremanence, a partial thermoremanence plus a pre-impact magnetization, or a pre-impact magnetization. This model of thermal overprinting might be applicable to all lunar breccias of medium and higher metamorphic grade.

Gose, W. A.↗

Mare Crisium - Regional stratigraphy and geologic history

Spectral reflectance measurements of five Luna 24 samples and new telescopic reflectance spectra of 10-20 km areas of seven sites in Mare Crisium have been used to calibrate multispectral images of mare units. Based on these data, three major mare units are defined in the Crisium basin and their stratigraphy is interpreted. The oldest mare unit is exposed in the ejecta of the craters Picard and Peirce and along the outer edge of the southeastern part of the basin. The next younger unit includes the Luna 24 site and generally follows a topographic annulus along the basin margin. The youngest mare unit occupies the central part of the basin. It is concluded that subsidence occurred throughout the emplacement of mare units, including extensive warping and downfaulting of the inner part of the Crisium basin.

Adams, J. B.↗

Chemical character of the partially flooded Smythii Basin based on Al/Si orbital X-ray data

Orbital X-ray fluorescence data indicate that continuous mare-basalt flooding is confined to the northeastern quadrant of the Smythii Basin. Al/Si values for soils in the unflooded northwestern section of the Smythii Basin closely approximate those for the adjacent terra to the west. Terra soils east of Mare Smythii, however, are unusually aluminous compared to terra soils west of the basin. This pronounced contrast between Al/Si values for terra soils to the east and west of Smythii as well as the minimal difference in values between the northwestern section of the basin and adjacent terra to the west are most likely due to a chemically homogeneous layer of ejecta from a large impact event west of Mare Smythii, such as that which formed the Crisium Basin. An alternate hypothesis is that the unflooded section of the basin is predominantly original basin floor material, indicating that the impact forming the 4km deep Smythii Basin did not penetrate into a horizon chemically different from the terra west of Smythii. The chemical contrast between the terra east and west of Smythii, then, would be ascribed to lateral heterogeneity within the lunar crust

Andre, C. G.↗

Geologic-magnetic correlations on the moon - Apollo subsatellite results

Comparison of the magnetic-field measurements of the Apollo subsatellite magnetometers with USGS geologic maps suggests that the ancient lunar field may have been greater during the Imbrian Period than the earlier Pre-Nectarian and Nectarian periods. Further, the field seems to have varied in direction. These data are consistent with a model in which the ancient lunar magnetizing field arises from a core dynamo which does not form until the Imbrian Period. Impacts during this period then result in magnetized crater melt and ejecta blankets. It is emphasized, however, that the area sampled by the subsatellite magnetometers is but a small fraction of the lunar surface. These results must be confirmed with studies of independent regions of the lunar surface before they can be considered conclusive.

Russell, C. T.↗

4.2-4.3 AE anorthositic soil fragments - Equilibrated or unequilibrated polycomponent systems

The petrographies and phase chemistries of five lunar crystalline anorthositic fragments with Ar-40/Ar-39 plateau 'ages' ranging from 4.1 to 4.3 AE are reported. An investigation is conducted to determine whether the individual fragments are monomict or polymict breccias. For polymict breccias it is attempted to establish whether clasts and matrix have equilibrated chemically. On the basis of the results of the investigation it is suggested that sample 73263,1,1 was a breccia (possibly a clast-laden melt) containing old clasts, incorporated in an ejecta blanket that was annealed at about 4.1 AE in a transient high-temperature event. The sample 73263,1,6 studied is an annealed anorthositic breccia containing approximately 20% clasts dominated by single-crystal plagioclase fragments. The obtained data are consistent with a two-component system containing old plagioclase clasts in a young (about 4.0 AE) annealed, matrix. The annealing event at approximately 4.0 AE was insufficient to equilibrate the argon. It is found that four of the breccias having ages of about 4.2 AE or more are polymict. The most striking feature of all of the samples studied is the presence of a significant amount of 4.2-4.3 AE argon.

Delano, J. W.↗

/Ar-39/-/Ar-40/ ages of lunar rocks

The (Ar-39)-(Ar-40) ages for 21 lunar samples from Apollo 14, 15, 16, and 17 are presented. The cosmic-ray exposure ages, Ca, and K contents are also measured. Mare basalt 15075, a slowly cooled pyroxene-phyric basalt, has a (Ar-39)-(Ar-40) plateau age of 3.45 + or - 0.2 billion years. This is one of the oldest mare basalts found at Apollo 15. 65777, a recrystallized noritic breccia, has a plateau age of 3.72 + or - 0.02 billion years, relatively young for a highland rock. This rock is probably related to a cratering event over 200 m.y. post Imbrium. Similarly breccia 68516 was formed 150 m.y. post Imbrium. Histograms for the (Ar-39)-(Ar-40) plateau ages strongly suggest that the peak in ages at Apollo 14, 16, and 17 of about 4 billion years is caused by the dominance of Imbrium ejecta at these landing sites.

Schaeffer, G. A.↗

Nearly pure Apollo 12 KREEP - Soil sample 12023

It is suggested that soil sample 12023, which was collected during the Apollo 12 mission from a 20 cm trench on the east rim of Sharp Crater, matured on a KREEP regolith surface, since its major element chemistry and FMR linewidth are indistinguishable from those of the Fra Mauro (Apollo 14) soils. Attention is given to the distribution of the sample's major mineral components. It is suggested that the origin of 12023 may either be ejecta from Fra Mauro material, or ray material from the Copernicus crater.

Morris, R. V.↗

Cosmic-ray exposure history at Taurus-Littrow

Recent surface history at Taurus-Littrow is dominated by emplacement of the Central Cluster and Bright Mantle morphological units, both believed to have resulted from arrival of ejecta from a large primary crater, probably Tycho. This paper reports new noble gas data for eight Apollo 17 rocks. Kr-81 - Kr cosmic ray exposure ages for these rocks affirm the observation of a pronounced grouping of ages, reinforcing the photogeologic evidence for the site-wide nature of the Central Cluster event. The consequences of post-cratering shielding changes are considered and it is concluded that the differences can reasonably be attributed to these changes, particularly because of the greater likelihood of rollover and impact fragmentation of the relatively smaller rocks from which most age data have been obtained. These considerations also lead to a more refined age estimate of 109 plus or minus 4 m.y. for Central Cluster, the Bright Mantle, and Tycho.

Drozd, R. J.↗

Shock compression and adiabatic release of a titaniferous mare basalt

A report is presented regarding the dynamic properties of a rock indigenous to the mare basins of the moon. The reported data were obtained in a study of sample 70215, a very titanium-rich basalt (58% pyroxene, 18% ilmenite, 15% plagioclase, 6% olivine, and 3% quartz by weight). This rock is probably representative of a class of the earliest mare-filling extrusive rocks which are exposed on the present lunar surface. Two series of experiments were performed. One set of experiments involved the measuring of Hugoniot and release adiabats to 15.7 GPa with a propellant gun apparatus. In the second set of experiments, a light-gas gun was employed to yield Hugoniot data at about 120 GPa and release states at about 90 GPa. Lunar basalt 70215 appears to be among the densest rocks in the present lunar sample collection, having a crystal density of 3.38 g/cu cm and a porosity of about 1.3%. The results of the experiments have important implications for both the degree of shock metamorphism expected for impact processes and the extent of ejecta transport on mare surfaces with high-titanium basalt composition.

Ahrens, T. J.↗

On the constancy of the lunar cratering flux over the past 3.3 billion yr

Utilizing a method that minimizes random fluctuations in sampling crater populations, it can be shown that the ejecta deposit of Tycho, the floor of Copernicus, and the region surrounding the Apollo 12 landing site have incremental crater size-frequency distributions that can be expressed as log-log linear functions over the diameter range from 0.1 to 1 km. Slopes are indistinguishable for the three populations, probably indicating that the surfaces are dominated by primary craters. Treating the crater populations of Tycho, the floor of Copernicus, and Apollo 12 as primary crater populations contaminated, but not overwhelmed, with secondaries, allows an attempt at calibration of the post-heavy bombardment cratering flux. Using the age of Tycho as 109 m.y., Copernicus as 800 m.y., and Apollo 12 as 3.26 billion yr, there is no basis for assuming that the flux has changed over the past 3.3 billion yr. This result can be used for dating intermediate aged surfaces by crater density.

Guinness, E. A.↗

Crater degradation on Mercury and the moon - Clues to surface evolution

A preliminary investigation was conducted regarding the variations in the morphological characteristics of Mercurian craters that appear to be associated with a degradation of fresh craters. Craters are classified according to relative states of degradation in order to provide evidence on degradation styles and rates on Mercury, and to correlate degradation with major geologic events in the history of the planet. Processes and relative rates of degradation on Mercury and the moon are also compared. Degradation trends of crater morphology are found to be parallel on Mercury and the moon. The severe destruction of interior structures in lunar craters may have resulted from more widespread distribution of ejecta due to the moon's lower gravity. The possibility is considered that the smooth plains on the surface of Mercury were formed early in the history of that planet.

Wood, C. A.↗

Interpreting statistics of small lunar craters

Some of the wide variations in the crater-size distributions in lunar photography and in the resulting statistics were interpreted as different degradation rates on different surfaces, different scaling laws in different targets, and a possible population of endogenic craters. These possibilities are reexamined for statistics of 26 different regions. In contrast to most other studies, crater diameters as small as 5 m were measured from enlarged Lunar Orbiter framelets. According to the results of the reported analysis, the different crater distribution types appear to be most consistent with the hypotheses of differential degradation and a superposed crater population. Differential degradation can account for the low level of equilibrium in incompetent materials such as ejecta deposits, mantle deposits, and deep regoliths where scaling law changes and catastrophic processes introduce contradictions with other observations.

Schultz, P. H.↗

Crater morphometry from bistatic radar

In the present paper, bistatic radar techniques are discussed which can be used to identify and measure the dimensions of anomalously scattering regions on planetary surfaces. The morphometric potential of the bistatic radar is demonstrated by an example in which spectral features in Apollo 14 echoes are correlated with parts of the lunar crater Lansberg. Crater dimensions, including width of interior walls and extent of the ejecta blanket, are determined from a quantitative analysis. It is shown that the technique can be generalized for scattering areas at arbitrary positions with respect to the ground track, and could easily be inverted for characterization of a 'blind' target, such as Venus.

Simpson, R. A.↗

Origin of outer rings in lunar multi-ringed basins - Evidence from morphology and ring spacing

The reported investigation has the objective to examine both the morphology and morphometry of several of the freshest lunar basins including Orientale, Imbrium, Nectaris, Crisium, and Humorum, and to compare the characteristics of their three most prominent rings to features in smaller craters. On the basis of comparisons it is concluded that the outer basin ring forms within the region where significant structural uplift of the basin rim is to be expected. Therefore the formation of the outer ring scarp may be closely associated with structural uplift of the inner portion of the crater rim flank. According to a model suggested for the origin of the outer two rings, the cratering event formed two inner rings, a central peak ring, and an uplifted crater rim crest, with deposition of ejecta during the process.

Head, J. W.↗

Prompt solar proton events and coronal mass ejections

Data from the HAO white-light coronagraph and the X-ray telescope on Skylab have been used to investigate the coronal manifestations of 18 prompt solar proton events observed on the IMP 7 spacecraft during the Skylab period. Evidence is found that a mass-ejection event is a necessary condition for the occurrence of a prompt proton event. Mass-ejection events can be observed directly in the white-light coronagraph when they occur near the limb and inferred from the presence of a long-decay X-ray event when they occur on the disk. It is suggested that: (1) the occurrence of mass-ejection events facilitates the escape of protons - whether accelerated at low or high altitudes - to the interplanetary medium; and (2) there may exist a proton acceleration region above or around the outward moving ejecta far above the flare site.

Kahler, S. W.↗

Characteristics of metal particles in Apollo 16 rocks

It is pointed out that FeNi metal particles, composed predominantly of kamacite and ranging in size from less than 1 micron to more than 2 mm across, are ubiquitous in the lunar samples returned by the Apollo and Luna missions. The metal particles seldom exceed 1% of the volume of a lunar sample. However, their study has proven to be of considerable potential value in a number of aspects of lunar petrogenesis related to thermal history, equilibration temperatures, reduction processes and oxygen fugacities during magmatic crystallization and subsolidus reduction and oxidation, and the meteoritic component of lunar rocks based on Ni-Co contents of individual metal particles. Detailed studies have been conducted of the textures and compositions of the metal particles in 19 Apollo 16 rock samples representing material from the North Ray and the South Ray ejecta and/or fall-back blankets. It was found that the textures and compositions of the metal particles in the Apollo 16 rocks can be correlated with their host petrology.

Misra, K. C.↗

The formation of lunar breccias - Sintering and crystallization kinetics

The process of clastic breccia formation by viscous sintering in a stress-free environment is analyzed by treating crystallization and sintering as concurrent, competing processes. The kinetic analysis of crystallization is based on the construction of continuous cooling curves corresponding to the degree of crystallinity observed in the matrix of the breccia. These curves are obtained from corresponding time-temperature-transformation curves, which in turn are constructed from measured values of the crystal growth rate together with calculated values of the nucleation frequency. The kinetic analysis of sintering is based on a modification of the Frenkel (1945) treatment of viscous sintering appropriate for conditions of continuous cooling. The analysis is applied to Lunar Composition 70019 to illustrate the approach. It is shown that it is possible from the kinetic analysis to estimate both the rate at which a given breccia cooled and the minimum temperature at which the matrix particles came in contact. The results obtained for Lunar Composition 70019 seem physically reasonable and suggest that this sample cooled on the surface of the moon in its present form rather than buried in an ejecta blanket from which it was later excavated.

Uhlmann, D. R.↗