SEARCH · Engineering Papers

Results for “Echo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Stress-wave attenuation in thin structures by ultrasonic through-transmission

The steady-state amplitude of the output of an ultrasonic through-transmission measurement is analyzed and the result is given in closed form. Provided that the product of the input and output transduction ratios, the specimen-transducer reflection coefficient, the specimen-transducer phase-shift parameter, and the material phase velocity are known, this analysis gives a means for determining the through-thickness attenuation of an individual thin sample. Multiple stress-wave reflections are taken into account, and so signal echoes do not represent a difficulty. An example is presented for a graphite fiber epoxy composite (Hercules AS/3501-6). Thus, the technique provides a direct method for continuous or intermittent monitoring of through-thickness attenuation of plate structures which may be subject to service structural degradation.

Lee, S. S.↗

NASA NTRS1980

A digital fast correlation approach to produce SEASAT SAR imagery

This paper describes a digital processing algorithm and its associated system design for producing images from SEASAT Synthetic Aperture Radar (SAR) data. The proposed system uses the fast Fourier transform approach to perform the two-dimensional correlation process. The range migration problem, which is often a major obstacle to efficient processing, can be alleviated by approximating the locus of echoes from a point target by several linear segments. SAR data corresponding to each segment is correlated separately, and the results are coherently summed to produce full-resolution images. This processing approach exhibits high computation efficiency and simple processing control functions. It is particularly attractive for software implementation based on general purpose computer. Results of this implementation and examples of digitally correlated SEASAT SAR imagery are discussed

Wu, C.↗

NASA NTRS1982

The use of artificial electron beams as probes of the distant magnetosphere

The use of artificial electron beams as probes of the distant magnetosphere is discussed. The accelerators, the method of injecting and analyzing the beams using television techniques and particle counters, and how the beams simulate the natural trapped electrons are summarized. It is found that when an electron beam is injected from a sounding rocket in the ionosphere, the rocket potential rises to a positive value and collects a current of ionospheric plasma electrons. It is proposed to use optical methods on the Space Shuttle to analyze electron beams injected in orbit, and in view of the results of the ECHO 5 experiments, such optical techniques may prove ineffective due to background luminosity from the ground and other sensitivity limitations.

Winckler, J. R.↗

NASA NTRS1981

Remote detection of the maximum altitude of equatorial ionospheric plasma bubbles

Nearly 200 post-sunset low-altitude passes of the Alouette 2 and ISIS 1 satellites near the dip equator are studied in order to find the maximum ionospheric plasma bubble altitudes, which are determined by calculating the apex altitude of the magnetic field line passing through the satellite when it is immersed in a bubble. The calculations are made only upon the observation of conjugate hemisphere ionospheric echoes, which result from ducted HF sounder signals that are guided along field-aligned irregularities within the plasma depletion. The maximum bubble altitudes corresponding to the three longitude sectors centered on zero deg, 75 deg W, and 105 deg E, are found to often exceed 1000 km, but seldom 3000 km. The electron density depletions within these field-aligned bubbles, as measured at the point of satellite encounter with the topside ionosphere, are generally less than a factor of two but may exceed a factor of ten.

Benson, R. F.↗

NASA NTRS1981

A shuttle scanning laser altimeter for topographic mapping

The shuttle scanning laser altimeter is an instrument, currently under development at JPL, capable of producing a three-dimensional elevation map of the topography along a wide swath beneath a spaceborne platform. Operating on the same principle as radar (broadcast of a short pulse of radiation and timing the reception of an echo) the very narrow beamwidths and high pulse rates of modern lasers would allow a significant breakthrough in the areal resolution capability of altimeters. Specifically, the copper vapor laser currently available and planned for use would provide 50 meter horizontal and 3 meter vertical resolution over a 10 kilometer continuous swath or, in a snapshot mode, a 50 kilometer square area.

Kobrick, M.↗

NASA NTRS1982

Rain measurements from space using a modified Seasat-type radar altimeter

The incorporation in the 13.5 GHz Seasat-type radar altimeter of a mode to measure rain rate is investigated. Specifically, an algorithm is developed relating the echo power at the various range bins, to the rain rate taking into consideration Mie scattering and path attenuation. The dependence of the algorithm on rain drop size distribution and nonuniform rain structure are examined and associated uncertainties defined. A technique for obtaining drop size distribution through the measurements of power at the top of the raincell and power difference through the cell also is investigated together with an associated error analysis. A description of the minor hardware modifications to the basic Seasat design is given for implementing the rain measurements.

Goldhirsh, J.↗

NASA NTRS1982

The life cycle of thunderstorm gust fronts as viewed with Doppler radar and rawinsonde data

This paper presents the time-dependent analysis of the thunderstorm gust front with the use of Project NIMROD data. RHI cross sections of reflectivity and Doppler velocity are constructed to determine the entire vertical structure. The life cycle of the gust front is divided into four stages: (1) the formative stage; (2) the early mature stage; (3) the late mature stage; and (4) the dissipation stage. A new finding is a horizontal roll detected in the reflectivity pattern resulting from airflow that is deflected upward by the ground, while carrying some of the smaller precipitation ahead of the main echo core of the squall line. This feature is called a 'precipitation roll'. As determined from rawinsonde data, the cold air behind the gust front accounts for the observed surface pressure rise. Calculations confirm that the collision of two fluids produce a nonhydrostatic pressure at the leading edge of the outflow. The equation governing the propagation speed of a density current accurately predicts the movement of the gust front.

Wakimoto, R. M.↗

NASA NTRS1984

Improved Coal-Thickness Measurement

Summed signals and dielectric-filled antenna improve measurement. Improved FM radar for measuring thickness of coal seam eliminates spectrum splitting and reduces magnitude of echo from front coal surface.

Barr, T. A.↗

NASA NTRS1982

Recent improvements and enhancements to NASTRAN

Several improvements and enhancements recently made to NASTRAN are described. Some of the more important features are: streamlined rigid formats; improved rigid formats; changes related to plotting; checking of required PARAM bulk data cards; checkpoint/restart capability; unsorted and sorted bulk data deck echo; automatic output of the DMAP source listing; elimination of link switching caused by use of utility modules; paging the NASTRAN output; processing of mixed record data blocks by INPUT2/OUTPUT2 modules; module execute flag included in the OSCAR listing; and use of the multiple XDMAP cards in the DMAP. It is concluded that these changes increase the usefulness of the program.

Pamidi, P. R.↗

NASA NTRS1982

Analysis of combustion spectra containing organ pipe tone by cepstral techniques

Signal reinforcements and cancellations due to standing waves may distort constant bandwidth combustion spectra. Cepstral techniques previously applied to the ground reflection echo problem are used to obtain smooth broadband data and information on combustion noise propagation. Internal fluctuating pressure measurements made using a J47 combustor attached to a 6.44 m long duct are analyzed. Measurements made with Jet A and hydrogen fuels are compared. The acoustic power levels inferred from the measurements are presented for a range of low heat release rate operating conditions near atmospheric pressure. For these cases, the variation with operating condition of the overall acoustic broadband power level for both hydrogen and Jet A fuels is consistent with previous results showing it was proportional to the square of the heat release rate. However, the overall acoustic broadband power level generally is greater for hydrogen than for Jet A.

Miles, J. H.↗

NASA NTRS1982

The application of digital signal processing techniques to a teleoperator radar system

A digital signal processing system was studied for the determination of the spectral frequency distribution of echo signals from a teleoperator radar system. The system consisted of a sample and hold circuit, an analog to digital converter, a digital filter, and a Fast Fourier Transform. The system is interfaced to a 16 bit microprocessor. The microprocessor is programmed to control the complete digital signal processing. The digital filtering and Fast Fourier Transform functions are implemented by a S2815 digital filter/utility peripheral chip and a S2814A Fast Fourier Transform chip. The S2815 initially simulates a low-pass Butterworth filter with later expansion to complete filter circuit (bandpass and highpass) synthesizing.

Pujol, A.↗

NASA NTRS1981

Potential of dual-measurement techniques for accurate determination of instantaneous rainfall rate from space

The incorporation in the 13.5 GHz SEASAT type radar altimeter of a mode to measure rain rate is investigated. Specifically, an algorithm is developed relating the echo power at the various range bins to the rain rate, taking into consideration Mie scattering and path attenuation. The dependence of the algorithm on rain drop size distribution, and non-uniform rain structure are examined and associated uncertainties defined. A technique for obtaining drop size distribution through the measurements of power at the top of the raincell and power difference through the cell is also investigated together with an associated error analysis. A description of the minor hardware modifications to the basic SEASAT design is given for implementing the rain measurements.

Ulbrich, C. W.↗

NASA NTRS1981

Bistatic radar meteorological satellite

A technique is discussed that employs a radar transmitter with a moderate size antenna placed in a geosynchronous orbit with either a 0 degree or a low inclination orbit. The reflected signals from the precipitation are then received either on a single beam from a satellite having a beamwidth of about 6 degrees or preferably with a beam that scans the U.S. in a raster pattern with about 0.9 degrees beamwidth. While it would seem that a bistatic system with the transmitter at synchronous altitude and the receivers near the surface would not be a very efficient way of designing a radar system, it is somewhat surprising that the required power and antenna sizes are not that great. Two factors make the meteorological application somewhat more attractive than the bistatic detection of point targets. First, the bistatic reflections of radar signals from precipitation are to a large extent omnidirectional, and while raindrops are spheriods rather than spheres, the relationship of the reflectivity of the rain to rainfall rate can be easily derived. The second reason is that the rain echo signal level is independent of range from a receive only radar, and if the bistatic system works at all, it will work at long ranges.

Nathanson, F. E.↗

NASA NTRS1983

Travelling wave effects in large space structures

Several aspects of travelling waves in Large Space Structures(LSS) are discussed. The dynamic similarity among LSS's, electric power systems, microwave circuits and communications network is noted. The existence of time lag between actuation and response is illuminated with the aid of simple examples, and their prediction is demonstrated. To prevent echoes, communications lines have matched terminations; this idea is applied to the design of dampers of one dimensional structures. Periodic structures act as mechanical band pass filters. Implications of this behavior are examined on a simple example. It is noted that the implication is twofold; continuum models of periodic lattice structures may err considerably; on the other hand, it is possible to design favorable transmission (and resonance) characteristics into the structure.

Vonflotow, A.↗

NASA NTRS1981

A microwave pressure sounder

A technique for the remote measurement of atmospheric surface pressure will be described. Such measurements could be made from a satellite in polar orbit and would cover many areas for which conventional meteorological data are not available. An active microwave instrument is used to measure the strength of return echoes from the ocean surface at a number of frequencies near the 60 GHz oxygen absorption band. Factors which affect the accuracy with which surface pressure can be deduced from these measurements will be discussed and an instrument designed to test the method by making measurements from an aircraft will be described.

Peckham, G. E.↗

NASA NTRS1981

A digital Seasat SAR correlation-simulation program

A correlation-simulation program for processing Seasat SAR data is presented, featuring the use of FORTRAN code to allow simple transference to another computer. The highest attainable azimuthal resolution for Seasat SAR experiments and the ability to generate images with varying quality by varying resolution or the number of looks are additional features. A fiber optics link transfers the Seasat data from high intensity digital tapes to an SEL 32/55 computer, and the least significant bits of the 5 bit data samples are truncated, thus the input data have 4 bits per sample. A total 8192 echoes are processed each time and stored on 8 separate data files on the disk. In addition, a program operating on 1-look high resolution images for performance simulations of proposed radar systems and processing schemes has been completed. Finally, the coding is simple, and 8 hours are required to process one image using this program.

Li, F.↗

NASA NTRS1982

Strong refraction near the Venus surface - Effects observed by descent probes

The telemetry signals from Pioneer Venus probes indicated the strong downward refraction of radio waves. As the probes descended, the strength of the direct signal decreased because of absorption and refractive defocusing. During the last 30 km of descent there was a second measured component in addition to the direct signal. Strong atmospheric reaction is important in strengthening echoes that are scattered toward the earth. Such surface-reflected signals are good indicators of horizontal winds.

Croft, T. A.↗

NASA NTRS1982

Radar detectability of comets

Earth-based radar observations of comets are restricted to the detection of the nucleus since detection of an echo from the dust or from the plasma near a comet seems infeasible. The successful detection of the nucleus can provide information on its size, spin vector, surface-scattering properties, and orbit. Only P/Encke has so far been detected by radar, and that detection was marginal. At most, three other known comets could be detected by radar within the next five years.

Kamoun, P. G.↗