Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EQUATIONS OF MOTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Transient wave propagation in composite plates due to impact

Stress-wave propagation in a composite plate due to an impact has been examined using anisotropic elasticity theory. The plate is modelled as a number of identical anisotropic layers whose elastic moduli are given. Mindlin's (1959) approximate theory of plates is then applied to each layer to obtain a set of difference-differential equations of motion by using the interlaminar stresses and displacements as explicit variables. Dispersion relationships for harmonic waves are found when traction-free boundary conditions are applied to both surfaces of the plate. The difference-differential equations are reduced to difference equations via integral transforms. With given impact boundary conditions these equations are solved for an arbitrary number of layers in the plate, and the transient propagation of a stress wave is calculated by means of a fast Fourier transform algorithm.

Sung Kim, B.↗
NASA NTRS1986

Sharply curved turn around duct flow predictions using spectral partitioning of the turbulent kinetic energy and a pressure modified wall law

Computational predictions of turbulent flow in sharply curved 180 degree turn around ducts are presented. The CNS2D computer code is used to solve the equations of motion for two-dimensional incompressible flows transformed to a nonorthogonal body-fitted coordinate system. This procedure incorporates the pressure velocity correction algorithm SIMPLE-C to iteratively solve a discretized form of the transformed equations. A multiple scale turbulence model based on simplified spectral partitioning is employed to obtain closure. Flow field predictions utilizing the multiple scale model are compared to features predicted by the traditional single scale k-epsilon model. Tuning parameter sensitivities of the multiple scale model applied to turn around duct flows are also determined. In addition, a wall function approach based on a wall law suitable for incompressible turbulent boundary layers under strong adverse pressure gradients is tested. Turn around duct flow characteristics utilizing this modified wall law are presented and compared to results based on a standard wall treatment.

Santi, L. Michael↗
NASA NTRS1987

Component response to random vibratory motion of the carrier vehicle

Two physical models of component plus supporting substructure are considered. Each model consists of a rigid body attached to a moving base by means of linear springs and viscous dampers. The second model differs from the first in that its dampers are elastically supported. The first model receives the more extensive treatment. Base motion, assumed a random translational motion parallel to a fixed axis, is prescribed only to the extent that the power spectral density (PSD) of its acceleration is given; and, as given, its plot on log-log graph paper is a series of straight line segments, each segment having an extremity in common with the adjacent segment. Closed expressions are given for the mean squares of base acceleration, base velocity, and base displacement. The component is restricted to planar motion and allowed two degrees of freedom, one translational and one rotational. Integral expressions are given for the mean squares of component response variables, the transfer functions essential to mean square computation being available via the equations of motion. Closed expressions are given for mean squares of certain of the response variables for the case wherein the base acceleration PSD is constant.

Tuell, L. P.↗
NASA NTRS1990

A new class of solutions for interstellar magnetohydrodynamic shock waves

An analysis is presented of the equations of motion for steady MHD shock waves proopagating in interstellar clouds, for boundary conditions that preclude C shocks. In addition to J shocks, in which the neutral fluid component becomes subsonic at an adiabatic jump front, the equations admit a new class of solutions, called C-asterisk shocks, in which the transition to subsonic flow occurs continuously at a sonic point. Numerical methods are developed for computing the structure of J and C-asterisk shocks propagating in diffuse interstellar clouds. The effects of chemical, ionization, and recombination processes are included in this treatment. An alternative numerical method, which uses artificial viscosity to facilitate integration through sonic points, is analyzed and shown to be invalid. A set of exemplary solutions, computed for realistic shock parameters, shows that C-asterisk shocks occur for a broad range of conditions relevant to diffuse interstellar clouds.

Roberge, W. G.↗
NASA NTRS1955

Optimum flight paths of turbojet aircraft

The climb of turbojet aircraft is analyzed and discussed including the accelerations. Three particular flight performances are examined: minimum time of climb, climb with minimum fuel consumption, and steepest climb. The theoretical results obtained from a previous study are put in a form that is suitable for application on the following simplifying assumptions: the Mach number is considered an independent variable instead of the velocity; the variations of the airplane mass due to fuel consumption are disregarded; the airplane polar is assumed to be parabolic; the path curvatures and the squares of the path angles are disregarded in the projection of the equation of motion on the normal to the path; lastly, an ideal turbojet with performance independent of the velocity is involved. The optimum Mach number for each flight condition is obtained from the solution of a sixth order equation in which the coefficients are functions of two fundamental parameters: the ratio of minimum drag in level flight to the thrust and the Mach number which represents the flight at constant altitude and maximum lift-drag ratio.

CLIMBING SPEEDS - EFFECT OF ALTITUDE↗
NASA NTRS1993

Issac, Jason Cherian ses in transonic flow

Flutter analysis of a two degree of freedom airfoil in compressible flow is performed using a state-space representation of the unsteady aerodynamic behavior. Indicial response functions are used to represent the normal force and moment response of the airfoil. The structural equations of motion of the airfoil with bending and torsional degrees of freedom are coupled to the unsteady air loads and the aeroelastic system so modelled is solved as an eigenvalue problem to determine the stability. The aeroelastic equations are also directly integrated with respect to time and the time-domain results compared with the results from the eigenanalysis. A good agreement is obtained. The derivatives of the flutter speed obtained from the eigenanalysis are calculated with respect to the mass and stiffness parameters by both analytical and finite-difference methods for various transonic Mach numbers. The experience gained from the two degree of freedom model is applied to study the sensitivity of the flutter response of a wing with respect to various shape parameters. The parameters being considered are as follows: (1) aspect ratio; (2) surface area of the wing; (3) taper ratio; and (4) sweep. The wing deflections are represented by Chebyshev polynomials. The compressible aerodynamic state-space model used for the airfoil section is extended to represent the unsteady aerodynamic forces on a generally laminated tapered skewed wing. The aeroelastic equations are solved as an eigenvalue problem to determine the flutter speed of the wing. The derivatives of the flutter speed with respect to the shape parameters are calculated by both analytical and finite difference methods.

Issac, Jason Cherion↗
NASA NTRS1972

SCIP2 flight instrumentation specification for parameter identification: User's guide

SCIP2 which is a digital computer program that can be used to investigate the effects of instrumentation errors on the accuracy of aircraft stability and control derivatives identified from flight test data is presented. The program is based on the assumptions that the aircraft differential equations of motion are linear and consist of small perturbations about a quasisteady flight condition. It is also assumed that a Newton-Raphson optimization technique is used for identifying the estimates of the parameters. A summary of the equations which are coded in the program are included.

Taniguchi, N.↗
NASA NTRS1976

Use of active control technology to improve ride qualities of large transport aircraft

Analyses, construction and flight testing of two systems: Beta-vane and Modal Suppression Augmentation System (MSAS), which were developed to suppress gust induced lateral accelerations of large aircraft, are described. The 747 transport was used as the test vehicle. The purpose of the Beta-vane system is to reduce acceleration levels at the dutch roll frequency whereas the function of the MSAS system is to reduce accelerations due to flexible body motions caused by turbulence. Data from flight test, with both systems engaged shows a 50 to 70 percent reduction in lateral aft body acceleration levels. Furthermore, it is suggested that present day techniques used for developing dynamic equations of motion in the flexible mode region are limited.

Cohen, G. C.↗
NASA NTRS1980

Rotor blade aeroelastic stability and response in forward flight

The aeroelastic stability and response problem of the coupled flap-lag-torsional dynamics of a hingeless rotor blade in forward flight is treated in a comprehensive manner. The spatial dependence of the partial differential, nonlinear, equations of motion is discretized using a multimodal Galerkin method. The aeroelastic problem is coupled with the trim state of the helicopter obtained from improved, representative, trim procedures. The nonlinear time dependent equilibrium position, or response, about which the equations are linearized is obtained by solving a sequence of linear periodic response problems, using quasi-linearization. Numerous results illustrating blade behavior in forward flight are presented.

Friedmann, P. P.↗
NASA NTRS1988

Semi-Lagrangian integration of a grid-point shallow water model on the sphere

This paper describes a semi-Lagrangian technique for integrating the equations of motion on the global domain. The technique uses an auxiliary spherical coordinate system at each near-polar gridpoint of the latitude-longitude grid; the auxiliary system is obtained by a rotation such that the new equator passes through the gridpoint in question and the new coordinate directions coincide with those of the original system at that point. The technique was applied to the shallow water equations, incorporating a semiimplicit treatment of the adjustment terms on a C-grid, with two-time levels. A five day integration was successfully carried out for a situation involving strong cross-polar flow. No filtering or diffusion was required to maintain stability over a five day period.

Mcdonald, A.↗
NASA NTRS1991

Dynamic analysis and control of lightweight manipulators with flexible parallel link mechanisms

The flexible parallel link mechanism is designed for increased rigidity to sustain the buckling when it carries a heavy payload. Compared to a one link flexible manipulator, a two link flexible manipulator, especially the flexible parallel mechanism, has more complicated characteristics in dynamics and control. The objective of this research is the theoretical analysis and the experimental verification of dynamics and control of a two link flexible manipulator with a flexible parallel link mechanism. Nonlinear equations of motion of the lightweight manipulator are derived by the Lagrangian method in symbolic form to better understand the structure of the dynamic model. A manipulator with a flexible parallel link mechanism is a constrained dynamic system whose equations are sensitive to numerical integration error. This constrained system is solved using singular value decomposition of the constraint Jacobian matrix. The discrepancies between the analytical model and the experiment are explained using a simplified and a detailed finite element model. The step response of the analytical model and the TREETOPS model match each other well. The nonlinear dynamics is studied using a sinusoidal excitation. The actuator dynamic effect on a flexible robot was investigated. The effects are explained by the root loci and the Bode plot theoretically and experimentally. For the base performance for the advanced control scheme, a simple decoupled feedback scheme is applied.

Lee, Jeh Won↗
NASA NTRS1989

Evidence of the existence and eastward motion of superclusters at the Equator

A numerical experiment performed by Hayashi and Sumi (1986) with an atmospheric GCM has shown that moist convection in the equatorial region is spontaneously organized into a form of supercluster (an area of precipitation with a spatial extent of about 2000 km and an eastward propagation speed of about 15 m/sec. Here, the existence of superclusters in the real atmosphere is shown through a comparison between satellite observations and the GCM results. It is argued that eastward motion of convective activity occurs not only as the well-known property of the 30-60-day oscillation, but as a property of synoptic-scale disturbances at the equator.

Hayashi, Yoshi-Yuki↗
DOE OSTI2021

Emergence of Lanes and Turbulent-like Motion in Active Spinner Fluid

Assemblies of self-rotating particles are gaining interest as a novel realization of active matter with unique collective behaviors such as edge currents and non-trivial dynamic states. Here, we develop a continuum model for a system of fluid-embedded spinners by coarse-graining the equations of motion of the discrete particles. We apply the model to explore mixtures of clockwise and counterclockwise rotating spinners. We find that the dynamics is sensitive to fluid inertia: in the inertialess system, after transient turbulent-like motion the spinners segregate and form steady traffic lanes. At small but finite Reynolds number instead, the turbulent-like motion persists and the system exhibits a chirality breaking transition leading to a single rotation sense state. Our results shed light on the dynamic behavior of non-equilibrium materials exemplified by active spinners.

36 MATERIALS SCIENCE↗
NASA NTRS1982

The origin of the Kirkwood gaps - A mapping for asteroidal motion near the 3/1 commensurability

A mapping of the phase space onto itself with the same low-order resonance structure as the 3/1 commensurability in the planar-elliptic restricted three-body problem is obtained. This mapping is about 1,000 times faster than the usual method of numerically integrating the averaged equations of motion. It exhibits some surprising behavior that might provide a key to the origin of the Kirkwood gaps. It is noted that a test asteroid placed in the gap may evolve for a million years with low eccentricity (less than 0.05) and then suddenly jump to large eccentricity (greater than 0.3), becoming a Mars crosser. The removal of the asteroid by a close encounter with Mars would then be possible. As a first test of this hypothesis, a distribution of 300 test asteroids in the area of the 3/1 commensurability was evolved for two million years. When the Mars crossers are removed, the distribution of initial conditions reveals a gap at the location of the 3/1 Kirkwood gap.

Wisdom, J.↗
NASA NTRS1976

Response analysis of flexible aircraft with active control

The small-perturbation equations of motion of a flexible aircraft with an active control technology (ACT) system are developed to evaluate the stability and performance of the controlled aircraft. The total aircraft system is formulated in state vector format and the system of equations is completed with fully unsteady and low-frequency aerodynamics for arbitrary, complex configurations based on a potential aerodynamic method. The ACT system equations are incorporated in the digital computer program FCAP (Flight Control Analysis Program) which can be used for the analysis of complete aircraft configurations, including control system, with either low-frequency or fully unsteady aerodynamics. The application of classical performance analyses including frequency response, poles and zeros, mean-square response, and time response in FCAP in state vector format is discussed.

Noll, R. B.↗
NASA NTRS1976

Performance analysis of flexible aircraft with active control

Small perturbation equations of motion of a flexible aircraft with an active control technology (ACT) system were developed to evaluate the stability and performance of the controlled aircraft. The total aircraft system was formulated in state vector format and the system of equations was completed with fully unsteady and low frequency aerodynamics for arbitrary, complex configurations based on a potential aerodynamic method. The ACT system equations were incorporated in the digital computer program FCAP (Flight Control Analysis Program) which can be used for the analysis of complete aircraft configurations, including control system, with either low frequency or fully unsteady aerodynamics. The application of classical performance analyses including frequency response, poles and zeros, mean square response, and time response in FCAP in state vector format was discussed.

Noll, R. B.↗
NASA NTRS1985

Application of CFD techniques toward the validation of nonlinear aerodynamic models

Applications of Computational fluid dynamics (CFD) methods to determine the regimes of applicability of nonlinear models describing the unsteady aerodynamic responses to aircraft flight motions are described. The potential advantages of computational methods over experimental methods are discussed and the concepts underlying mathematical modeling are reviewed. The economic and conceptual advantages of the modeling procedure over coupled, simultaneous solutions of the gasdynamic equations and the vehicle's kinematic equations of motion are discussed. The modeling approach, when valid, eliminates the need for costly repetitive computation of flow field solutions. For the test cases considered, the aerodynamic modeling approach is shown to be valid.

Schiff, L. B.↗