SEARCH · Engineering Papers

Results for “ELECTROMAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Electromagnetic design of the transition section between modules of a wakefield accelerator

Not Available

43 PARTICLE ACCELERATORS↗

DOE OSTI2020

Information Carried by Electromagnetic Radiation Launched from Accelerated Polarization Currents

We show experimentally that a continuous, linear, dielectric antenna in which a superluminal polarization-current distribution accelerates can be used to transmit a broadband signal that is reproduced in a comprehensible form at a chosen target distance and angle. The requirement for this exact correspondence between broadcast and received signals is that each moving point in the polarization-current distribution approaches the target at the speed of light at all times during its transit along the antenna. This results in a one-to-one correspondence between the time at which each point on the moving polarization current enters the antenna and the time at which all of the radiation emitted by this particular point during its transit through the antenna arrives simultaneously at the target. This has the effect of reproducing the desired time dependence of the original broadcast signal. For other observer-detector positions, the time dependence of the signal is scrambled, due to the nontrivial relationship between emission (retarded) time and reception time. This technique represents a contrast to conventional radio transmission methods; in most examples of the latter, signals are broadcast with little or no directivity, selectivity of reception being achieved through the use of narrow frequency bands. In place of this, the current paper uses a spread of frequencies to transmit information to a particular location; the signal is weaker and has a scrambled time dependence elsewhere. Here, we point out the possible relevance of this mechanism to 5G neighborhood networks and pulsar astronomy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2017

First determination of ground state electromagnetic moments of Fe 53

Here, the hyperfine coupling constants of neutron deficient 53 Fe were deduced from the atomic hyperfine spectrum measured using the bunched-beam collinear laser spectroscopy technique. The low-energy 53 Fe beam was produced by projectile-fragmentation reactions followed by gas stopping, and used for the first time for laser spectroscopy. Ground state magnetic-dipole and electric-quadrupole moments were determined as μ= –0.65(1)μ N and Q=+35(15)e 2 fm 2 , respectively. The multiconfiguration Dirac-Fock method was used to calculate the electric field gradient to deduce Q from the quadrupole hyperfine coupling constant, since the quadrupole coupling constant has not been determined for any Fe isotopes. Both experimental values agree well with nuclear shell model calculations using the GXPF1A effective interaction performed in a full fp shell model space, which support the soft nature of the 56 Ni nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2021

Review of Methods to Accelerate Electromagnetic Transient Simulation of Power Systems

Not Available

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2019

A Classical Field Theory Formulation for the Numerical Solution of Time Harmonic Electromagnetic Fields

Finite element representations of Maxwell's equations pose unusual challenges inherent to the variational representation of the “curl-curl” equation for the fields. We present a variational formulation which solves for the four-potential instead, based on classical field theory. Borrowing from quantum electrodynamics, we modify the Lagrangian by adding an implicit gauge-fixing term. This reformulation explicitly accounts for Gauss’ law through the coupling between $\phi$ and $\rho$ , and enables the use of nodal basis functions instead of edge elements for time-harmonic problems. Here, we demonstrate how this formulation, adhering to the deeper underlying symmetries of the four-dimensional covariant field description, provides a highly general, robust numerical framework.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Design Optimization and Measurement Uncertainty of an Electromagnetic Level Sensor for Liquid Metal Reactors

Here, this article describes the design and operation of a prototype mutual inductance level sensor (MILS) and the development and validation of a finite-element analysis (FEA) model describing its behavior. The MILS was designed for use in liquid sodium up to temperatures of 650 °C in the Mechanisms Engineering Test Loop (METL) at Argonne National Laboratory (ANL). Preliminary testing was performed in a room temperature test stand with aluminum acting as an analog for the sodium to better understand sensor performance and provide accurate code validation data. This experimental data, along with material properties found in literature, were used to validate an FEA model in ANSYS Maxwell. The validated ANSYS Maxwell model was used to examine the performance of the MILS in various environments and under various operating conditions. Simulations suggest the following: The MILS will perform adequately in liquid sodium and liquid lead at temperatures up to 650 °C . The temperature dependence of electrical conductivity imposes a temperature dependence on the sensor that requires proper compensation. The MILS signal sensitivity is maximized when mutual inductance between sensor coils is maximized, and sensor geometry should be selected to account for this factor. The operating frequency of the MILS can be optimized and is dependent on process fluid material, operating temperature, and materials/geometry of sensor system. Finally, the use of a stainless-steel isolating thimble does not adversely affect the sensor signal. The primary sources of error for this MILS system are the accuracy of the calibration standard against which the sensor is calibrated, and the temperature dependence of the sensor. This work contains all the necessary details to recreate the FEA model and results. This model can be used to optimize the performance of a MILS in any operating environment to read any electrically conductive working fluid.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

Electromagnetic Transient (EMT) Simulation Algorithms for Evaluation of Large-Scale Extreme Fast Charging Systems (T&D Models)

Simulation of high-fidelity models of extreme fast charging (XFC) systems and large-area power grids with many XFCs can be time consuming in traditional simulators. Traditional simulators use a single method of discretization for all the components that results in imposing a large computational burden of inverting a large matrix as well as increased computations related to single method of discretization (that is typically a trapezoidal method). To overcome the problem of simulating large-area power grids with many XFCs, in this paper, advanced numerical simulation algorithms are applied for the first time together to reduce the dimension of matrix inversion. Here, the algorithms include numerical stiffness-based segregation, time constant-based segregation, clustering and aggregation on differential algebraic equations (DAEs), and multi-order integration approaches. These algorithms apply multiple discretization algorithms rather than a single discretization algorithm that further reduces the computational burden. The approaches mentioned here have resulted in speed-up of up to 18x in the simulation of a single distribution system with 15 XFCs and of up to 271x in the simulation of a transmission-distribution system with 300 XFCs in multiple distribution feeders with respect to conventional simulators (like power systems computer aided design [PSCAD]).

42 ENGINEERING↗

DOE OSTI2013

Energy exchange between electromagnetic waves on the director diffraction grating in planar waveguide with nematic layer

The energy exchange between two coupled TE modes on the diffraction grating of the director in a planar waveguide containing a nematic liquid crystal layer is calculated. The diffraction grating is induced by an external electric field in the nematic layer with periodic anchoring energy at the waveguide surface. The intensity of the signal mode at the output of the nematic layer is calculated as a function of the amplitude and period of the anchoring-energy modulation, the nematic layer sizes, and the electric-field strength. The cases of modes with the same and opposite directions are considered. Analytical expressions for the maximum intensities of the signal mode are derived. In both cases the maximum intensity of the signal mode increases with an increase in the electric-field strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2013

Chern-Simon potential in models of interaction of electromagnetic field with thin films

The proposed by Symanzik approach for the modeling of interaction of a macroscopic material body with quantum fields is considered. Its application in quantum electrodynamics enables one to establish the most general form of the action functional describing the interaction of 2-dimensional material surface with photon field. The models making it possible to calculate for thin films from non-ideal conducting material the Casimir energy, Casimir-Polder potential, characteristics of scattering processes and investigation of magneto- and electrostatic phenomena are presented. The specific of regularization and renormalization procedures used by calculations and the physical meaning of obtained results are discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2015

Direct discrete simulation of the kinetic Landau-Fokker-Planck equation with an alternating external electromagnetic field

A stochastic method of simulation of Coulomb interaction is considered. The main idea of the method is to approximate the nonlinear Landau kinetic collision integral by the Boltzmann integral. In its realization, the method can be attributed to a wide class of Monte Carlo-type methods. It is easily combined with the existing particle methods used to simulate collisionless plasmas. This is important for simulation of the dynamics of both laboratory and space plasmas when the mean free path of plasma particles is comparable with the plasma inhomogeneity scale length. Illustrative examples of relaxation of two-temperature plasma being subject to a high-frequency alternating electric field are given, and differences from their classical description are considered. The method satisfies the conservation laws for the number of particles, momentum, and energy and is simple and efficient in implementation.