Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Critical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

On the determination of the Hermaean magnetic moment - A critical review

The determination of Mercury's magnetic moment from the spatially and temporally limited observations obtained by the Mariner 10 mission is dependent upon the assumed nature of both the intrinsic planetary magnetic field and that of the magnetospheric current systems. In this paper the methods that have been used for this purpose are reviewed. The results that have been obtained are then considered in comparison with the constraints placed on the planetary field by the solar wind dynamic pressures and stand-off distances inferred from the Mariner 10 magnetic field data by Slavin and Holtzer (1979) which are consistent with an effective dipole moment of 6 + or - 2 x 10 to the 22nd G cu cm. It is found that the models which fit the observations with substantial quadrupole and octupole moments are not consistent with the magnetospheric boundary conditions, presumably owing to incorrect assumptions regarding the magnetopause position, incorrect assumptions regarding solar wind dynamic pressure, and/or averaging over temporal variations in the Mariner 10 data.

Slavin, J. A.↗
NASA NTRS1980

The evaluation of evaporation by infrared thermography: A critical analysis of the measurements on the Crau test site

Evapotranspiration was calculated for both the dry and irrigated zone by four methods which were compared with the energy balance method serving as a reference. Two methods did not involve the surface temperature. They are ETR(n) = R(n), liable to be valid under wet conditions and ET(eq) = (delta/delta + gamma) R(n) i.e, the first term of Penman's equation, adapted to moderately dry conditions. The methods using surface temperature were the combined energy balance aerodynamic approach and a simplified approach proposed by Jackson et al. Tests show the surface temperature methods give relatively satisfactory results both in the dry and wet zone, with a precision of 10% to 15% compared with the reference method. As was to be expected, ET(eq) gave satisfactory results only in the dry zone and ET(Rn) in the irrigated zone. Thermography increased the precision in the estimate of ET relative to the most suitable classical method by 5% to 8% and is equally suitable for both dry and wet conditions. The Jackson method does not require extensive ground measurements and the evaluation of the surface roughness.

Seguin, B.↗
NASA NTRS1980

Critical analysis of nitramine decomposition data: Activation energies and frequency factors for HMX and RDX decomposition

A summary of a literature review on thermal decomposition of HMX and RDX is presented. The decomposition apparently fits first order kinetics. Recommended values for Arrhenius parameters for HMX and RDX decomposition in the gaseous and liquid phases and for decomposition of RDX in solution in TNT are given. The apparent importance of autocatalysis is pointed out, as are some possible complications that may be encountered in interpreting extending or extrapolating kinetic data for these compounds from measurements carried out below their melting points to the higher temperatures and pressure characteristic of combustion.

Schroeder, M. A.↗
NASA NTRS1981

Critical parameters for coarse coal underground slurry haulage systems

Factors are identified which must be considered in meeting the requirements of a transportation system for conveying, in a pipeline, the coal mined by a continuous mining machine to a storage location neat the mine entrance or to a coal preparation plant located near the surface. For successful operation, the slurry haulage the system should be designed to operated in the turbulent flow regime at a flow rate at least 30% greater than the deposition velocity (slurry flow rate at which the solid particles tend to settle in the pipe). The capacity of the haulage system should be compatible with the projected coal output. Partical size, solid concentration, density, and viscosity of the suspension are if importance as well as the selection of the pumps, pipes, and valves. The parameters with the greatest effect on system performance ar flow velocity, pressure coal particle size, and solids concentration.

Maynard, D. P.↗
NASA NTRS1976

Simulation of a cometary conglomerate of frozen gases and dust in a zero-gravity environment: A critical evaluation of possible space experiments

It is proposed to use the Shuttle (OFT experiments) or eventually Spacelab to study, in the absence of gravity the low velocity accretion and the bulk properties of icy conglomerates simulating cometary material and their sedimentation and bulk properties in very small acceleration fields. Their behavior when exposed to the direct solar flux is also under consideration.

Delsemme, A. H.↗
NASA NTRS1981

A program-management plan with critical-path definition for Combustion Augmentation with Thermionic Energy Conversion (CATEC)

Thermionic energy conversion (TEC) is discussed. In recent TEC-topping analyses, overall plant efficiency (OPE) and cost of electricity (COE) improved slightly with current capabilities and substantially with fully matured technologies. Enhanced credibility derives from proven hot-corrosion protection for TEC by silicon-carbide clads in fossil fuel combustion products. Combustion augmentation with TEC (CATEC) affords minimal cost and plant perturbation, but with smaller OPE and COE improvements than more conventional topping applications. Risk minimization as well as comparative simplicity and convenience, favor CATEC for early market penetration. A program-management plan is proposed. Inputs, characteristics, outputs and capabilities are discussed.

Morris, J. F.↗
NASA NTRS1981

Critical requirements for the design of large space structures

The requirements for the design of a large space structure which will be deployed, erected, assembled or fabricated in space are delineated in terms of operational loads, stiffness requirements, structure-control interaction, deformations, precision requirements and member slenderness. Design examples for a truss antenna reflector, interorbit propulsion loads and free-flying solar reflectors are given. It is concluded that the demand for dimensional accuracy and stability form the primary requirements.

Hedgepeth, J. M.↗
NASA NTRS1981

Calculation of the critical cooling rate for amorphous Pd/77.5/Si/16.5/Cu/6/

The viscosity of the molten alloy Pd(77.5)Si(16.5)Cu(6) has been determined from 744 to 1000 C using an oscillating cup viscometer. Using these data (together with other pertinent physical data available for this alloy) in existing crystallization theory indicates that it could be made amorphous at cooling rates as low as 5-10 K/sec. This analysis assumes strictly homogeneous nucleation. Containerless solidification will be one good testing ground for the results of this analysis.

Steinberg, J.↗
NASA NTRS1980

Reliability validation of systems for life-critical applications

A framework is proposed which addresses traditional reliability validation approaches consisting of life testing techniques which are inapplicable for digital flight control systems. A specific validation methodology is identified based on logical proofs, analytical modeling, and experimental testing. Research activities required to support continued development of validation technology are identified, and the validation procedure is driven by the reliability model obtained from the system description. The analytical reliability model is shown to be a proper abstraction of the system under consideration, and a proof of correctness of system design and system scheduler performance is proposed.

Trivedi, K. S.↗
NASA NTRS1980

Materials processing in Space/Spacelab. FES/VCGS payload critical design review

A 25 mW He-Ne laser holographic recorder for recording the solution growth of triglycine sulfate crystals under low-zero gravity conditions is described. A systems engineering and design analysis, and mechanical and electrical design analyses of the equipmentation are presented. The equipment, fabricated for the Sl-3 flight on the space shuttle, was designed to take 300 holograms (two orthogonal views) on 50-235 film of each growth experiment. Specifications and capabilities for support module mechanical assemblies are lso presented.

Source record↗
NASA NTRS1982

Development of critical molecular weight-property specifications for high performance polymers used as adhesives and composites

The polyimide resin, LARC-160, was prepared from diethyl-3, 3', 4,4'-benzophenone tetracarboxylate, ethyl-5-norbornene-2,3-dicarboxylate and Jeffamine AP-22. The imidization reactions of NE and BTDE were studied by HPLC, C-13-NMR and IR. NE imidizes slowly at 12 C; BTDE imidizes when the resin is heated above 100 C. Both imidization reactions proceed directly to the imide. Neither amic acid is present in significant quantities at any stage of the imidization reactions. The monomer mixture was stored at 12 C for periods up to 14 months. The effects of resin aging at this temperature on the chemical composition of the resin monomer mixture and the imidized polymer formed on curing were investigated. Aging the resin monomer mixture has the effect of partially advancing the imidization reaction. The average size of the cured polymer increases slightly with resin age.

Kranbuehl, D. E.↗
NASA NTRS1980

Critical technology areas of an SPS development and the applicability of European technology

Possible system development and implementation scenarios for the hypothetical European part of a cooperative Satellite Power System effort are discussed, and the technology and systems requirements which could be used as an initial guideline for further evaluation studies are characterized. Examples of advanced European space technologies are described including high power microwave amplifiers, antennas, advanced structures, multi-kilowatt solar arrays, attitude and orbit control systems, and electric propulsion.

Kassing, D.↗
NASA NTRS1982

Land Mobile Satellite Service (LMSS): A conceptual system design and identification of the critical technologies. Part 1: Executive summary

A system design for a satellite aided land mobile service is described. The advanced system is based on a geostationary satellite which employs a large UHF reflector to communicate with small user antennas on mobile vehicles. It is shown that the system through multiple beam antennas and frequency reuse provides for radiotelephone and dispatch channels. It is concluded that the system is technologically feasible to provide service to rural and remote regions.

Naderi, F.↗
NASA NTRS1982

Land Mobile Satellite Service (LMSS): A conceptual system design and identification of the critical technologies: Part 2: Technical report

A conceptual system design for a satellite-aided land mobile service is described. A geostationary satellite which employs a large (55-m) UHF reflector to communicate with small inexpensive user antennas on mobile vehicles is discussed. It is shown that such a satellite system through multiple beam antennas and frequency reuse can provide thousands of radiotelephone and dispatch channels serving hundreds of thousands of users throughout the U.S.

Naderi, F.↗
NASA NTRS1981

Dynamic behavior of continuous cantilevered pipes conveying fluid near critical velocities

The plane motion of a cantilevered pipe conveying fluid is examined when the flow velocity is in the neighborhood of that generating flutter. In contrast to previous studies, the flow velocity is not prescribed as a constant, but is determined from the laws of motion. A system of two nonlinear partial differential equations which are coupled through the nonlinear terms is thereby obtained. The solution is found by the use of the Krylov-Bogoliubov averaging method and the results are discussed indicating the effect of nonlinearities.

Rousselet, J.↗
NASA NTRS1982

A critical velocity interaction between fast barium and strontium atoms and the terrestial ionospheric plasma

A disk of barium and strontium vapor traveling radially outward, perpendicular to the geomagnetic field lines, may be created by the detonation of a high-explosive, radially shaped charge with a liner composed of the two metals in the upper atmosphere. Because of solar radiation resonance, both the barium and the strontium may be optically tracked. Observations indicate the early formation of the metal ions thus evolved into a disk-shaped, stellate structure with a dark hole at the center of a radial structure. The results of these experiments indicate that the process could occur on a cosmic scale, and that unconfirmed aspects of the theory relating to this process could be determined through variation of the parameters in future radial rocket experiments.

Deehr, C. S.↗
NASA NTRS1982

The spokes in Saturn's rings - A critical evaluation of possible electrical processes

Among the mechanisms proposed to explain the novel spoke phenomenon occurring in Saturn's B-ring, the alignment of particles by an electric field has been suggested. In this and related theories, the particles are assumed to be adequately conducting; or at least it is the case that electrical conductivity generally acts to enhance the feasibility of the proposed processes. These ideas are appraised in light of the fact that the particles are most likely composed of ice. It is concluded that the electrical torque required to align the particles is many orders of magnitude larger than that which is likely to exist. Also, the conductivity of ice at ring temperatures is probably so small as to inhibit some of the proposed processes.

Weinheimer, A. J.↗