SEARCH · Engineering Papers

Results for “Concentrated Solar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Unveiling the role of halide mixing in the crystallization kinetics and charge transfer mechanisms of wide-bandgap organic–inorganic halide perovskites

Understanding the crystallization kinetics of Br–I mixed-halide WBG perovskite films, and their correlation to the crystallographic structure and charge transfer dynamics, is critical for advancing WBG perovskite devices. Despite many efforts to increase the photovoltaic performances of wide-bandgap (WBG, with a Br content above 20%) perovskite solar cells based on bromine–iodine (Br–I) mixed-halide perovskites, understanding the crystallization kinetics of WBG perovskite films, as well as the role of Br mixing in the crystallization kinetics, is still lacking. Furthermore, an overlooked aspect is the correlation of the halide compositions, crystallization kinetics, crystallographic structure, and charge transfer dynamics. Here, we unveil that Br–I mixed-halide WBG perovskite films undergo two intrinsically different crystallization kinetic processes. One is the intermediate solvent-complex phase-assisted growth (I-rich), and the other is top-to-bottom downward growth (Br-rich). Such downward growth (including high Br concentrations) correlates with the formation of a highly vertically oriented perovskite film, which is accompanied by defect formation caused by a dissolving and recrystallization process coupled with halide homogenization. Consequently, Br-rich WBG perovskite films exhibit enhanced charge carrier transport, but are concurrently plagued by non-radiative charge recombination. Addressing this fundamental perspective is critical to precisely tailor Br-related crystallization, which significantly affects the structure and optoelectronic properties of WBG perovskite films and devices.

Li, Nian↗

DOE OSTI2022

Semi Transparent Three-Dimensional Macroporous Quaternary Oxynitride Photoanodes for Photoelectrochemical Water Oxidation

Semi transparent three-dimensional macroporous (3DM) photoanodes based on quaternary oxynitrides have the potential to simultaneously realize superior light harvesting and efficient charge transfer in a tandem photoelectrochemical (PEC) cell. A 3DM CaTaO 2 N photoanode was prepared for the first time on a GaN/Al 2 O 3 substrate via a chemical route, and it exhibits a high transmittance of >60% in the wide solar spectrum and a photoresponse onset at −0.3 V versus the reversible hydrogen electrode (V RHE ) under simulated solar illumination. In particular, a plateau photocurrent density of 0.21 mA cm –2 was achieved at a low potential of 0.4 V RHE , which was 1.6-fold and more than 50-fold higher than a two-dimensional macroporous (2DM) CaTaO 2 N/GaN/Al 2 O 3 photoanode and a conventional particle-based CaTaO 2 N/GaN/Al 2 O 3 photoanode, respectively. The bicontinuous, interconnected pore structure within this 3DM film can improve charge carrier separation and collection by reducing the average diffusion distance for minority carriers toward the electrolyte. Optical measurements and simulations verified the enhanced sunlight harvesting in the 3DM photoanode, which was ascribed to the concentrated distribution of the electric field and multiple scattering. Furthermore, this study provides guidance for future synthesis of highly efficient semitransparent 3DM quaternary oxynitride-based photoanodes for a tandem PEC device.

Layers↗

DOE OSTI2021

Multimodal X-ray Microscopy: The Kinetics of Cu in CdTe Absorbers

The behavior of solar cells is very often limited by inhomogeneously distributed nanoscale defects. This is the case throughout the entire lifecycle of the solar cell, from the distribution of elements and defects during solar cell growth as well as the charge-collection and recombination during operation, to degradation and failure mechanisms due to impurity diffusion, crack formation, and irradiation- and heat-induced cell damage This has been known for a while in the field of crystalline silicon, but inhomogeneities are far more abundant in polycrystalline materials, and are the limiting factor in thin-film solar cells where grain sizes are often on the order of the diffusion length. We showed that the high penetration of hard X-rays combined with the high sensitivity to elemental distribution, structure, and spatial resolution offers a unique avenue for highly correlative studies at the nanoscale. We presented results on Cu-doped CdTe, where carrier collection is directly correlated to the kinetics of Cu inside the absorber and the particular Cu-phases at the ZnTe/CdTe interface. We complemented the results with modeling using PVRD-FASP and PyCDTS, where the X-ray beam induced profile can be reproduced by the equilibrium defect concentrations proposed by the solvers.

Bertoni, Mariana↗

DOE OSTI2023

Advancing Energy Equity Considerations in Distribution Systems Planning

Current distribution system planning (DSP) processes do not explicitly account for energy equity considerations, such as who is most affected by power system burdens, where those burdens are concentrated, and what investments can be made to improve baseline conditions. This paper proposes an iterative framework for advancing energy equity as an objective of the DSP process, showing how measurement strategies, or metrics (informed by conceptual foundations of energy justice), can be applied to benchmark equity performance at various stages. This methodology is applied for equity-aware distributed energy resource (DER) hosting capacity analysis and outage analysis to provide critical insights on infrastructure upgrade decisions compared to a business-as-usual (BAU) case. The analysis is performed on a taxonomy feeder representing the West Coast urban/semi-urban system with augmentation of electric vehicles (EVs) and rooftop solar photovoltaic (PV) generators. The study considers disadvantaged community (DAC) and non-disadvantaged community (NDAC) load regions to enable equity-aware simulations. The results demonstrate how equity-aware planning could reveal the limitations of the traditional DSP process as DAC regions are found to have lower DER hosting capacity and higher outage vulnerability. Overall, this work provides insights on the need to incorporate energy equity as an integral part of the DSP process.

Energy Equity, Distribution System Planning, DER a↗

DOE OSTI2024

Modeling of H2 Dispersion at ARIES

Hydrogen is a versatile and clean energy carrier that can be produced from various renewable sources such as wind, solar, and hydropower and help decarbonize electricity grids, industry, and transportation. Using the Hydrogen Research Facility under Advanced Research on Integrated Energy Systems (ARIES) at the National Renewable Energy Laboratory's (NREL) Flatirons campus as a test bench, the study examines the feasibility, useability, and value of using computational fluid dynamics (CFD) techniques to model hydrogen dispersion. The ARIES facility was chosen because controlled hydrogen releases can be performed at a rate of 27 kg-H2/hr. Site-specific atmospheric and weather condition data such as wind speed and temperature were used as inputs to the model. The results show statistical distributions and ranges of hydrogen concentrations at locations throughout the domain. Wind conditions are found to significantly impact the release behavior, including the hydrogen cloud's direction and concentrations. At low wind speeds (below 1 mph), hydrogen forms a cloud and at higher wind speeds (> 2-4 mph) hydrogen plume stretches in the direction of wind momentum. From >100 simulations for ARIES site-specific conditions, statistical quantities combined with a clustering algorithm were used to propose sensor location at various elevations from ground.

dispersion↗

DOE OSTI2024

Grand challenges of wind energy science – meeting the needs and services of the power system

The share of wind power in power systems is increasing dramatically, and this is happening in parallel with increased penetration of solar photovoltaics, storage, other inverter-based technologies, and electrification of other sectors. Recognising the fundamental objective of power systems, maintaining supply–demand balance reliably at the lowest cost, and integrating all these technologies are significant research challenges that are driving radical changes to planning and operations of power systems globally. In this changing environment, wind power can maximise its long-term value to the power system by balancing the needs it imposes on the power system with its contribution to addressing these needs with services. A needs and services paradigm is adopted here to highlight these research challenges, which should also be guided by a balanced approach, concentrating on its advantages over competitors. The research challenges within the wind technology itself are many and varied, with control and coordination internally being a focal point in parallel with a strong recommendation for a holistic approach targeted at where wind has an advantage over its competitors and in coordination with research into other technologies such as storage, power electronics, and power systems.

17 WIND ENERGY↗

DOE OSTI2021

Electrochemical Study on the Kinetic Properties of Fe 2+ /Fe, Ni 2+ /Ni, Cr 2+ /Cr and Cr 3+ /Cr 2+ in Molten MgCl 2 -KCl-NaCl Salts

Here, the fundamental kinetic parameters of corrosion product ions (Fe, Ni and Cr ions) are of significant importance to understand the corrosion mechanisms of the structural materials in the molten salts. In the present study, the fundamental data of Fe 2+ , Ni 2+ , Cr 2+ and Cr 3+ (diffusion coefficient D, exchange current density i 0 , charge transfer coefficient α, limiting current density i L and standard rate constant k0) were measured at different concentrations (1.53 × 10 –6 –7.48 × 10 –4 mol cm –3 ) and temperatures (600 °C–800 °C). The values of D are independent of concentrations and follow Arrhenius law with temperature, which descend in the order of D Cr 2+ > D Fe 2+ > D Cr 3+ > D Ni 2+ with values ranging from 0.94 × 10 –5 to 3.31 × 10 –5 cm 2 s –1 . Both i 0 and k 0 depend on the temperatures, which also follow Arrhenius law.

14 SOLAR ENERGY↗

DOE OSTI2021

Size-Dependent Janus-Ligand Shell Formation on PbS Quantum Dots

We studied the size-dependent Janus ligand shell formation on PbS QDs employing an X-type ligand exchange reaction between native oleate ligands and two substituted cinnamic acid ligands, trifluoromethyl- and dimethyl amino-cinnamic acid, representing electron donating and electron withdrawing ligands. The exchange reactions become significantly more favorable for both electron donating and withdrawing ligands (..delta..G becomes more negative) in the smaller QDs compared to the larger QDs likely because the ligand density is smaller on the larger QDs reducing the strength of the ligand-ligand interactions. We found that Janus-ligand shells form more readily on smaller QDs than on bigger QDs with electron donating ligands. We also observed a dependence on the QD concentration that should be considered when forming Janus-ligand shells. Two-dimensional solution nuclear magnetic resonance spectroscopy (2D-NMR) shows evidence of pronounced phase segregation between oleate and electron donating ligands on the smaller QDs consistent with the enhanced ligand-ligand interactions. This study broadens our understanding of how to construct Janus and patchy ligand shell morphologies on small QDs.

14 SOLAR ENERGY↗

DOE OSTI2022

AlScO 3 perovskite—An ~8 eV bandgap oxide predicted to exhibit low small hole polaron ionization energies and p -type conductivity at elevated temperatures

Here, we investigate electronic structure and dopability of an ultrawide bandgap (UWBG) AlScO 3 perovskite, a known high-pressure and long-lived metastable oxide. From first-principles electronic structure calculations, HSE06(+G 0 W 0 ), we find this material to exhibit an indirect bandgap of around 8.0 eV. Defect calculations point to cation and oxygen vacancies as the dominant intrinsic point defects limiting extrinsic doping. While acceptor behaving Al and Sc vacancies prevent n-type doping, oxygen vacancies permit the Fermi energy to reach ~0.3 eV above the valence band maximum, rendering AlScO 3 p-type dopable. Furthermore, we find that both Mg and Zn could serve as extrinsic p-type dopants. Specifically, Mg is predicted to have achievable net acceptor concentrations of ~10 17 cm -3 with ionization energy of bound small hole polarons of ~0.49 eV and free ones below 0.1 eV. These values place AlScO 3 among the UWBG oxides with lowest bound small hole polaron ionization energies, which, as we find, is likely due to large ionic dielectric constant that correlates well with low hole polaron ionization energies across various UWBG oxides.

14 SOLAR ENERGY↗

DOE OSTI2023

Human Health Risk Assessment for Improper Landfill Disposal of End-of-Life CdTe PV

The present work is a continuation of the 2020 IEA PVPS Task 12 Human Health Risk Assessment Methods for PV Part 3: Module Disposal Risks. The 2020 report performed a human health risk assessment (HHRA) for disposal of a cadmium telluride (CdTe) PV module in an unlined landfill, focusing solely on risks from cadmium. This study extends the 2020 HHRA on CdTe PV, analyzing eleven constituent elements: Cd, Se, Te, Cu, Si, Cr(III), Mo, Sn, Zn, Ni, and Al. The present HHRA was performed through two methods: utilization of the U.S. Environmental Protection Agency's (USEPA) Delisting Risk Assessment Software (DRAS V.4.0) on eight exposure pathways for cancer risk and non-cancer hazards; and comparison of exposure point concentrations to federal standards for groundwater, surface water, air, and soil exposure pathways. Cancer risks and non-cancer hazards posed by elemental leaching through all evaluated exposure pathways, using both methods, were found to be several orders of magnitude below USEPA health-protective thresholds. Cadmium exhibited both the highest risks and lowest uncertainty considering data availability on chemical content, leachate, and federal screening levels.

chemicals↗

DOE OSTI2024

Human Health Risk Assessment for Improper Landfill Disposal of End-of-Life CdTe Modules

CdTe↗

DOE OSTI2022

Origin of layered perovskite device efficiencies revealed by multidimensional time-of-flight spectroscopy

Mixtures of layered perovskite quantum wells with different sizes form prototypical light-harvesting antenna structures in solution-processed films. Gradients in the bandgaps and energy levels are established by concentrating the smallest and largest quantum wells near opposing electrodes in photovoltaic devices. Whereas short-range energy and charge carrier funneling behaviors have been observed in layered perovskites, our recent work suggests that such light-harvesting processes do not assist long-range charge transport due to carrier trapping at interfaces between quantum wells and interstitial organic spacer molecules. Here, we apply a two-pulse time-of-flight technique to a family of layered perovskite systems to explore the effects that interstitial organic molecules have on charge carrier dynamics. In these experiments, the first laser pulse initiates carrier drift within the active layer of a photovoltaic device, whereas the second pulse probes the transient concentrations of photoexcited carriers as they approach the electrodes. The instantaneous drift velocities determined with this method suggest that the rates of trap-induced carrier deceleration increase with the concentrations of organic spacer cations. Overall, our experimental results and model calculations suggest that the layered perovskite device efficiencies primarily reflect the dynamics of carrier trapping at interfaces between quantum wells and interstitial organic phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Sea ice evolution along the Northern Sea Route and implications for trans-Arctic shipping from 2021 through 2060

Arctic surface temperatures warmed at twice the global average in the second half of the 20 th century due to Arctic amplification (AA), a phenomenon predominantly caused by regional polar changes, like the melting of perennial sea ice and reduced sea ice extent (leading to more solar radiation being absorbed by the ocean surface as opposed to being reflected back to space by the ice surface). AA is projected to reach a factor of three even if the climate is stabilized by the mid 21 st century by reduced greenhouse gas emissions. In all emissions scenarios, AA is projected to lead to temperature changes at least 2.4 times larger than global mean surface temperature changes occurring between 2070 and 2100. The ice-albedo feedback, which occurs when the polar-marine surface absorbs more radiation as highly reflective sea ice melts, is reversible such that the premise of a runaway process is no longer accepted as a realistic possibility. No matter what actions are taken to reduce CO 2 concentrations in the atmosphere from now on, two different methods of predicting an ice-free Arctic suggest that perennial sea ice will mostly disappear in September by the year 2050. If there is no reduction in anthropogenic CO 2 and methane emissions, that scenario could occur sooner than 2030. Defining Arctic navigability as safe and economic passage of Polar Class 7 cargo ships without need of an escorting icebreaker, no single trans Arctic ship route will be navigable year-round in the first half of the 21 st century, including in the strong emission scenarios. However, seasonal trans-Arctic navigability will increase this century. An estimate on the number of days per year that the Northern See Route (NSR) will be navigable in the future is beyond the scope of this report. Along Northern Sea Routes 5 and 6, which run close to the Russian coast and Yamal LNG plant, an ARC 7 ice class LNG tanker, the equivalent of a Polar Class 3 (PC3) vessel, will be at low risk in December through April at some point during the current decade. May will continue to entail some risk (more than April) along relatively short segments of these routes through the end of the next decade (2030-2039). Come June, snow rapidly melts away, and thereafter the underlying sea ice begins becomes thinner and less concentrated, greatly reducing risk. However, neither path is desirable for ARC 7 tankers due to shallow bathymetry in Sannikov Strait, and a more desirable path for these ships passes to the north of the New Siberian Islands (route 20, discussed further below). Conventional LNG tankers (i.e., non-ice-strengthened vessels according to the IMO classification), without icebreaker escorts, will continue to encounter dangerous or impassable conditions along many sections of the NSR through the end of this decade for many months of the year. Through 2039, these conventional tankers will be able to operate safely along NSR 6 from August through October. By 2040-2049, the span of safe operation increases to August through November, and by 2050-2059 it increases to July through November, assuming a northward deviation to avoid the Sannikov Strait.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

An ab initio molecular dynamics investigation of the thermophysical properties of molten NaCl-MgCl 2

Molten salts have many applications in the nuclear and solar energy industries for thermal storage and heat transfer applications. However, there is a knowledge gap in molten salt thermophysical properties which hinders the technical readiness level of molten salt applications, especially in the nuclear industry. A common method of investigating new materials is through ab initio Molecular Dynamics (AIMD) simulations which is an effective tool to investigate structural and thermophysical properties at realistic temperatures. NaCl-MgCl 2 is an inexpensive salt that is a good candidate for use as a heat transfer medium in solar power applications or in the secondary loop of a nuclear reactor. In this article, the thermophysical properties of NaCl-MgCl 2 are computed via AIMD calculations to supplement the limited experimental studies in the literature. Here a wide range of compositions and temperatures for the pseudo-binary NaCl-MgCl 2 were used to calculate the density, heat capacity, compressibility, enthalpy of mixing, and volumetric thermal expansion coefficient. AIMD is shown to accurately model the densities of molten NaCl-MgCl 2 as there is good agreement with the available literature. This work observed a transition to a monotonic increase of the density with respect to MgCl 2 composition occurring above 1100 K. The heat capacity values increase uniformly with respect to concentration of MgCl 2 at a rate of 2.85 J/mol-K per 10 mol% of MgCl 2 . Select thermophysical properties are fit to a Redlich-Kister expansion for utilization in multiphysics simulations.

36 MATERIALS SCIENCE↗

DOE OSTI2026

The Binary Fraction of Stars in the Dwarf Galaxy Ursa Minor via Dark Energy Spectroscopic Instrument

We utilize multi-epoch line-of-sight velocity measurements from the Milky Way Survey of the Dark Energy Spectroscopic Instrument to estimate the binary fraction for member stars in the dwarf spheroidal galaxy Ursa Minor. Our dataset comprises 670 distinct member stars, with a total of more than 2,000 observations collected over approximately one year. We constrain the binary fraction for UMi to be $0.61^{+0.16}_{-0.20}$ and $0.69^{+0.19}_{-0.17}$, with the binary orbital parameter distributions based on solar neighborhood observation from Duquennoy & Mayor (1991) and Moe & Di Stefano (2017), respectively. Furthermore, by dividing our data into two subsamples at the median metallicity, we identify that the binary fraction for the metal-rich ([Fe/H]>-2.14) population is slightly higher than that of the metal-poor ([Fe/H]<-2.14) population. Based on the Moe & Di Stefano model, the best-constrained binary fractions for metal-rich and metal-poor populations in UMi are $0.86^{+0.14}_{-0.24}$ and $0.48^{+0.26}_{-0.19}$, respectively. After a thorough examination, we find that this offset cannot be attributed to sample selection effects. We also divide our data into two subsamples according to their projected radius to the center of UMi, and find that the more centrally concentrated population in a denser environment has a lower binary fraction of $0.33^{+0.30}_{-0.20}$, compared with $1.00^{+0.00}_{-0.32}$ for the subsample in more outskirts.

Qiu, Tian [Shanghai Jiao Tong Univ. (China); DESI ↗

DOE OSTI2025

Five Years of Dissolved Oxygen, Temperature, Salinity, Depth, Weather Data from a Transitioning Wetland at Beaver Creek, Washington, USA

Groundwater dissolved oxygen (DO) variability in coastal system remains poorly understood despite its importance for biogeochemical cycling and ecosystem modeling. Here we investigate the temporal variability in groundwater DO and its hydro-climatic drivers across hourly to seasonal timescales in a transitioning wetland at Beaver Creek, Washington, USA. The site is transitioning from a freshwater forest to a brackish tidal wetland following removal of a barrier in 2014 that prevented tides from accessing the freshwater creek. By utilizing novel optical dissolved oxygen instrumentation (Opti O2, LLC) we obtained continuous, high-frequency (5-minute), in-situ measurements of DO from the flood-plain from June 26th, 2019 through September 30th, 2024. This 63 month dataset is comprised of groundwater dissolved oxygen, temperature, water level and salinity timeseries from the floodplain. This dataset also includes rainfall, air pressure, air temperature, and solar radiation data collected with a co-located Campbell ClimaVUE50 weather sensor. All data is contained within a single csv (2019-06-26 to 2024-09-30 Beaver Creek DO, saln, BGS, temp, weather.csv) that can easily be viewed either using software such as Excel or using any text editor.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Atomic-scale mixing between MgO and H2O in the deep interiors of water-rich planets

Explore the source record for details and available documents.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

Sea ice pattern effect on Earth’s energy budget is characterized by hemispheric asymmetry

Earth’s energy budget is sensitive to the spatial distribution of sea surface temperature and sea ice concentration (SIC) change, but the global radiative effect of changes in SIC spatial distribution has not been quantified. We show that SIC-induced radiation anomalies at the top of the atmosphere are sensitive to the location of SIC reduction in each season, which qualitatively explains how and why the effect of sea ice loss on Earth’s energy budget is determined by its spatial pattern. Idealized experiments indicate that SIC-induced surface warming is greater in the Arctic regions, resulting in a more negative Planck feedback. Global low-level cloud cover responses to Arctic and Antarctic SIC reduction are also distinct, leading to more negative SIC-cloud feedback in Arctic regions. SIC-induced albedo feedback is sensitive to latitude due to inhomogeneous solar radiation at the surface. As a result, the simulated radiative effect of SIC anomalies during 1980–2019 is dominated by variations in the spatial pattern of SIC.

54 ENVIRONMENTAL SCIENCES↗