Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Computational analysis of hypersonic flows past elliptic-cone waveriders

A comprehensive study for the inviscid numerical calculation of the hypersonic flow past a class of elliptic-cone derived waveriders is presented. The theoretical background associated with hypersonic small-disturbance theory (HSDT) is reviewed. Several approximation formulas for the waverider compression surface are established. A CFD algorithm is used to calculate flow fields for the on-design case and a variety of off-design cases. The results are compared with HSDT, experiment, and other available CFD results. For the waverider shape used in previous investigations, the bow shock for the on-design condition stands off from the leading-edge tip of the waverider. It was found that this occurs because the tip was too thick according to the approximating shape formula that was used to describe the compression surface. When this was corrected, the bow shock became closer to attached as it should be. At Mach numbers greater than the design condition, a lambda-shock configuration develops near the tip of the compression surface. At negative angles of attack, other complicated shock patterns occur near the leading-edge tip. These heretofore unknown flow patterns show the power and utility of CFD for investigating novel hypersonic configurations such as waveriders.

Yoon, Bok-Hyun↗
NASA NTRS1993

Transition on a sharp cone at high enthalpy - New measurements in the shock tunnel T5 at GALCIT

An exploratory study of the laminar, transitional and turbulent boundary layer on a slender cone in hypervelocity flow was conducted in the high-enthalpy shock tunnel T5. A novel flow visualization technique using sodium seeding to increase the sensitivity of conventional interferometric techniques by resonant enhancement of the refractivity of the medium was developed to study its structure. The experiments were designed to cover a large range of specific reservoir enthalpy, ranging from the perfect-gas region to the range where significant oxygen and some nitrogen dissociation and recombination effects may be expected in the boundary layer. Surface heat flux measurements indicate that the transition Reynolds number is approximately the same as that observed in cold hypersonic flow in conventional continuous flow facilities, but significantly lower than that observed in 'quiet' tunnels. No significant effect of reservoir specific enthalpy on transition was observed. The heat flux distribution showed differences between the air and the nitrogen experiments in the laminar regime. These are consistent with the presence of recombination of oxygen at the wall. This view is supported by the fact that this effect is absent in the low-enthalpy region, where the heat flux distribution agrees with the similarity theory.

Germain, P.↗
NASA NTRS1992

Three-dimensional computed tomography from interferometric measurements within a narrow cone of views

A theory to determine the properties of a fluid from measurements of its projections was developed and tested. Viewing cones as small as 10 degrees were evaluated, with the only assumption being that the property was space limited. The results of applying the theory to numerical and actual interferograms of a spherical discontinuity of refractive index are presented. The theory was developed to test the practicality and limits of using three dimensional computer tomography in internal fluid dynamics.

Decker, Arthur J.↗
NASA NTRS1993

Boundary-layer transition extent measurements on a cone and flat plate at Mach 3.5

Wide excursions of the boundary-layer transition region are expected to occur on the X-30 National Aerospace Plane (NASP) due to the high Mach number, high temperature, and low density environment experienced during flight. Undesirable features of the transition region, such as the peak heat transfer rate, make it important to understand transition region physics. The current study investigates transition extent in 2D and axisymmetric bounday-layer flows. Surface-pitot and recovery temperature data obtained on a cone and flat plate at Mach 3.5 in the Supersonic Low-Disturbance Pilot Tunnel at NASA Langley are presented. Results show the effects of the unit Reynolds number, freestream disturbances, and nose/leading-edge bluntness on the extent of transition.

Chen, Fang-Jenq↗
NASA NTRS1991

Hypersonic cone flow predictions using an implicit upwind space-marching code

Solutions have been computed and results are presented for Problem 1, the case of Mach 9 transitional flow past a 7 deg half-angle cone at zero incidence. The solutions were computed using a code developed for the integration of the parabolized Navier-Stokes equations. The algorithm employed in the code is based on a Roe-type flux-difference-splitting scheme applied following a finite-volume approach. The basic algorithm has been modified to make it implicit and second-order accurate in the crossflow directions. Results are presented in terms of surface pressure and heat transfer as well as boundary layer profiles of pitot pressure, Mach number, and tangential velocity. The case was recalculated several times in an effort to determine sensitivities to such parameters as grid density, wall temperature, turbulence model parameters, as well as freestream expansion. Comparisons with the experimental data are presented and discussed.

Lawrence, Scott L.↗
NASA NTRS1956

Stability derivatives of cones at supersonic speeds

The aerodynamic stability derivatives due to pitching velocity and vertical acceleration are derived for circular cones traveling at supersonic speeds. Both first-order and a combination of first and second order potential solutions are obtained, and in calculations for the forces, no approximations are made to the tangency condition or the isentropic pressure relation. In addition, expressions for the forces, moments, and stability derivatives of arbitrary bodies of revolution are derived from Newtonian impact theory.

Tobak, Murry↗
NASA NTRS1957

Effect of bluntness on transition for a cone and a hollow cylinder at Mach 3.1

Bluntness was more effective in displacing transition downstream on a cylinder than on a cone. The downstream displacement of transition is related to the formation of a shock layer within which the Reynolds and Mach numbers are reduced and to pressure gradients that exist over the forward part of the model. Round bluntness in general had a favorable effect, whereas sharp-cornered flat bluntness above a certain size had unfavorable effects on the location of the transition point.

BODIES - SHAPE VARIABLES↗
NASA NTRS1951

Results of Flight Tests to Determine Drag of Parabolic and Cone-cylinder Bodies of Very Large Fineness Ratios at Supersonic Speeds

Results of a free-flight investigation at supersonic speeds to determine zero-lift drag of a series of bodies of revolution are presented. Configurations tested included two parabolic bodies with fineness ratios of 17.78 and 24.5 and two 8 degree cone-cylinder bodies with fineness ratios of 17.2 and 21.2. Results of previous tests of similar parabolic bodies but with lower fineness ratios are included in this paper for comparison. All bodies for which data are presented in this paper had a base-to-maximum-diameter ratio of 0.437. Calculated drag coefficients are shown for all bodies for which data are presented. (author)

Welsh, Clement J↗
NASA NTRS1953

Preliminary Drag and Heat-transfer Data Obtained from Air-launched Cone-cylinder Test Vehicle over Mach Number Range from 1.5 to 5.18

An air-launched cone-cylinder test vehicle designed to obtain data at Mach numbers above 4.0 was rocket boosted from a release Mach number of 5.18. The vehicle was launched at an altitude of 35,000 feet and reached peak velocity of 5150 feet per second at 28,500 feet. The total-drag coefficient (based on maximum cross-sectional area) decreased gradually from 0.31 at a Mach number of 1.75 to 0.145 at a Mach number of 5.18, while the Reynold's number (based on body length) increased from 31 x 10 to the 6th power to 107 x 10 to the 6th power. The skin friction coefficients, in general, were slightly lower than Van Driest's theoretical values for similar wall-temperature conditions. Convective heat-transfer coefficients were obtained from a single skin-thermocouple measurement. The maximum wall temperature recorded was 1240 degrees r.

Messing, Wesley E↗
NASA NTRS1956

Observation of Laminar Flow on a Blunted 15 Degree Cone-cylinder in Free Flight at High Reynolds Numbers and Free-stream Mach Numbers to 8.17

A highly polished 15 degree included-angle cone-cylinder with hemispherical tip has been flown to obtain boundary-layer transition and heat-transfer data. The model was launched from a carrier plane at an altitude of 47,500 feet. Laminar flow existed at a Reynolds number greater than 38.5 x 10(exp) 6 on the cylinder when the model was at the peak free-stream Mach number of 8.17. The results indicate an appreciable and favorable effect of tip bluntness in raising the allowable skin temperature for a given boundary-layer transition Reynolds number.

Disher, John H↗
NASA NTRS1951

Supersonic flow around circular cones at angles of attack

The properties of conical flow without axial symmetry are analyzed. The flow around cones of circular cross section at small angles of attack is determined by correctly considering the effect of the entropy gradients in the flow.

Ferri, Antonio↗
NASA NTRS1993

DSMC simulations of Mach 20 nitrogen flows about a 70 degree blunted cone and its wake

Numerical results obtained with the direct simulation Monte Carlo (DSMC) method are presented for Mach 20 nitrogen flow about a 70-deg blunted cone. The flow conditions simulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are simulated with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is to characterize the wake flow under rarefied conditions. This is accomplished by calculating the influence of rarefaction on wake structure along with the impact that an afterbody has on flow features. This data report presents extensive information concerning flowfield features and surface quantities.

Moss, James N.↗
NASA NTRS1993

Thin-layer and full Navier-Stokes calculations for turbulent supersonic flow over a cone at an angle of attack

The proper use of a computational fluid dynamics code requires a good understanding of the particular code being applied. In this report the application of CFL3D, a thin-layer Navier-Stokes code, is compared with the results obtained from PARC3D, a full Navier-Stokes code. In order to gain an understanding of the use of this code, a simple problem was chosen in which several key features of the code could be exercised. The problem chosen is a cone in supersonic flow at an angle of attack. The issues of grid resolution, grid blocking, and multigridding with CFL3D are explored. The use of multigridding resulted in a significant reduction in the computational time required to solve the problem. Solutions obtained are compared with the results using the full Navier-Stokes equations solver PARC3D. The results obtained with the CFL3D code compared well with the PARC3D solutions.

Smith, Crawford F.↗
NASA NTRS1993

Distribution of small volcanic cones on the surface of Venus by size and elevation: Implications for differential deposition of volcanic features

It appears that volcanic features are not evenly distributed on the surface of Venus. Head et. al. theorizes that the sparcity of volcanic features in the lowlands may be due to an altitude dependent inhibition of volatile exsolution and the resulting products of neutral buoyancy zones sufficient to form magma reservoirs and favoring flood lavas at lower elevation. The astronomy research classes of Evergreen and Sahuaro High Schools surveyed a cross-section of different elevation topography to investigate size and distribution of small volcanic cones by elevation. The results from this survey are presented.

Lockwood, J. F.↗
NASA NTRS1994

A simple analytical aerodynamic model of Langley Winged-Cone Aerospace Plane concept

A simple three DOF analytical aerodynamic model of the Langley Winged-Coned Aerospace Plane concept is presented in a form suitable for simulation, trajectory optimization, and guidance and control studies. The analytical model is especially suitable for methods based on variational calculus. Analytical expressions are presented for lift, drag, and pitching moment coefficients from subsonic to hypersonic Mach numbers and angles of attack up to +/- 20 deg. This analytical model has break points at Mach numbers of 1.0, 1.4, 4.0, and 6.0. Across these Mach number break points, the lift, drag, and pitching moment coefficients are made continuous but their derivatives are not. There are no break points in angle of attack. The effect of control surface deflection is not considered. The present analytical model compares well with the APAS calculations and wind tunnel test data for most angles of attack and Mach numbers.

Pamadi, Bandu N.↗
NASA NTRS1995

DSMC calculations for 70-deg blunted cone at 3.2 km/s in nitrogen

Numerical results obtained with the direct simulation Monte Carlo (DSMC) method are presented for Mach 15.6 nitrogen flow about a 70-deg spherically blunted cone at zero incidence. This flow condition is one of several generated in the Large Energy National Shock (LENS) tunnel during tests of a 15.24 cm diameter model with an afterbody sting. The freestream Knudsen number, based on model diameter, is 0.0023. The focus of the DSMC calculations is to characterize the near wake flow under conditions where rarefaction effects may influence afterbody aerothermal loads. This report provides information concerning computational details along with flowfield and surface quantities. Calculations show that the flow enveloping the test model is in thermal nonequilibrium and a sizable vortex develops in the near wake. Along the model baseplane the heating rates are about 0.6 percent of the forebody stagnation value while the maximum heating along the sting is about 4.2 percent of the forebody stagnation value. Comparison of a Navier-Stokes solution with the present calculations show good agreement for surface heating, pressure, and skin friction results.

Moss, J. N.↗
NASA NTRS1995

Nonequilibrium Flow Expansion Experiment Around a Blunted Cone

Eleven tests were carried out in DLR's high enthalpy tunnel in Goettingen (HEG), Germany, for reservoir conditions ranging from 10 to 23 MJ/kg and a free stream Mach number of approximately 10. A blunted cone model with a cylindrical afterbody (sting) was investigated. To obtain information on the influence of defined parameters on the body back flow, especially of the reacting gas, the heat transfer rate along the body contour was measured with fast response surface thermocouples on the forebody and sensitive thin film heat transfer gauges on the base and sting of the model. Flow visualization with a holographic interferometry system was provided. Tests are described, and a preliminary interpretation of the observed flow effects are given.

Kastell, Dirk↗