Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

Molybdenum sulphide clusters as redox-active supports for low-valent uranium

The preparation of an actinide substituted cubane cluster, (Cp* 3 Mo 3 S 4 )Cp*UI 2 , and its reduced derivatives are reported. Structural and spectroscopic investigations provide insight into the unique interactions between the actinide and its redox-active molybdenum sulphide metalloligand, serving as a model to study atomically-dispersed, low-valent actinide ions on MoS 2 surfaces. To probe the ability of the assembly to facilitate multielectron small molecule activation, the reactivity of the fully-reduced cluster, (Cp* 3 Mo 3 S 4 )Cp*U, with azobenzene was investigated. Addition of the substrate results in the formation of a cis-bis-imido cluster, (Cp* 3 Mo 3 S 4 )Cp*U(=NPh) 2 . Here, cooperative reactivity between the actinide and redox-active support facilitates the 4e − -reduction of substrate.

Patra, Kamaless↗

Strong magnetic exchange coupling in Ln 2 metallocenes attained by the trans -coordination of a tetrazinyl radical ligand

A combination of high-performing lanthanide metallocenes and tetrazine-based radical ligands leads to a new series of radical-bridged dinuclear lanthanide metallocenes; [(Cp* 2 Ln III ) 2 (bpytz˙ - )][BPh 4 ] (where Ln = Gd (1), Tb (2), Dy (3) and Y (4); Cp* = pentamethylcyclopentadienyl; bpytz = 3,6-bis(3,5-dimethyl-pyrazolyl)-1,2,4,5-tetrazine). The formation of the radical species is achieved via a controlled, stepwise synthesis and verified in all complexes by X-ray crystallography and SQUID magnetometry, as well as EPR spectroscopy of 4. Through the judicious choice of the Cp* ancillary ligands and by taking advantage of the steric effects imposed by their bulkiness, we were able to promote the trans coordination mode of the bpytz˙ - radical anion that enables stronger magnetic exchange coupling compared to the cis fashion. This yields a J Gd–rad = -14.0 cm -1 in 1, which is the strongest exchange coupling observed in organic monoanionic radical-bridged lanthanide metallocene systems. The strong Ln-rad exchange coupling was further confirmed by high-frequency EPR (HF-EPR) spectroscopy and broken-symmetry (BS) density functional theory (DFT) calculations. Further, this combined with the highly anisotropic nature of Tb III and Dy III ions in 2 and 3, respectively, leads to strong SMM behavior and slow relaxation of the magnetization at zero fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum simulation of conical intersections

We explore the simulation of conical intersections (CIs) on quantum devices, setting the groundwork for potential applications in nonadiabatic quantum dynamics within molecular systems.

Chemistry↗

Catalysis activity and chemoselectivity control with the trans ligand in Ru–H pincer complexes

(PhPN H P)Ru(H)(Cl)(CO) serves as a precatalyst to a variety of important catalytic transformations but most improvements have been restricted to the replacement of the CO ligand cis to the hydride or changing the Ph groups of the pincer for other aryl or alkyl groups. The ligand trans to the hydride is often another hydride and studies that utilize other trans ligands in catalysis are limited. Here, in this work, we synthesized a series of [(PhPN H P)Ru(H)(CO)(L)][BPh 4 ] complexes bearing isonitrile, PMe 3 , or a N-heterocyclic ligand trans to the Ru–H. We compared the new complexes abilities to catalyze the transfer hydrogenation of ketones. We found that all the trans ligands improved the chemoselectivity and stability of the catalysts; and strong π-accepting ligands resulted in poor catalytic activities whereas strong σ-donating ligands accelerated the catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying how the cis/trans ratio of N,N -dimethyl-3,5-dimethylpiperidinium hydroxide impacts the growth kinetics, composition and local structure of SSZ-39

This work integrates experiments and computational methods to quantify how the cis/trans ratio of the OSDA used in SSZ-39 synthesis impacts the crystallization kinetics, material properties, and final product composition. The crystallization kinetics increase by 30% when increasing the trans isomer content from 14% to 80%. Per prior work, in all cases based on the synthesis gel composition and product yield aluminum is the limiting reagent, and the absence of any amorphous material detected in the time resolved PXRD studies leads us to conclude that FAU dissolution is the rate limiting step in the formation of SSZ-39 in this synthesis protocol. The TGA and NMR results suggest that the trans isomer of OSDA is selectively incorporated into the product. The NMR binding studies, and corresponding DFT-based results show that the trans isomer binds to FAU more strongly than the cis isomer, providing one possible explanation for this enhancement in kinetics and preferential uptake of the trans isomer. The EDS analysis indicates that the Si/Al ratios are between 7.7 and 8.6 at low and high trans OSDA content, indicating zeolite composition is mildly sensitive to the trans isomer content. EDS results show this decrease in aluminum content leads to a corresponding decrease in sodium uptake. DFT-based calculations confirm OSDA–sodium interactions cannot explain any decrease in sodium uptake, reinforcing lower aluminum content as the cause of lower sodium uptake. Preliminary cobalt titration experiments show a surprisingly low cobalt uptake but also show a clear dependence of the cobalt uptake on the solution pH.

Cui, Zheng [Tulane University, New Orleans, LA (Un↗

An improved guess for the variational calculation of charge-transfer excitations in large systems

Ab initio quantum-chemical methods that perform well for computing the electronic ground state are not straightforwardly transferable to electronically excited states, particularly in large molecular systems. Wave function theory offers high accuracy, but is often prohibitively expensive. Methods based on time-dependent density functional theory (TD-DFT) are crucially sensitive to the chosen exchange-correlation functional (XCF) parameterization, and system-specific tuning protocols were therefore proposed to address the method's robustness. Methods based on the variational relaxation of the excited-state electron density showcased promising results for the calculation of charge-transfer excitations, but the complex shape of the electronic hypersurface makes convergence to a specific excited state much more difficult than for the ground state when standard variational techniques are applied. We address the latter aspect by providing suitable initial guesses, which we obtain by two separate constrained algorithms. Combined with the squared-gradient minimization algorithm for all-electrons relaxation in a freeze-and-release scheme (FRZ-SGM), we demonstrate that orbital-optimized density functional theory (OO-DFT) calculations can reliably converge to the charge-transfer states of interest even for large molecular systems. We test the FRZ-SGM method on a phenothiazine-anthraquinone CT excitation in a supramolecular Pd(II) coordination cage complex as a function of the cage conformation. This compound has been studied experimentally prior to our work. We compare this freeze-and-release scheme to two XCF reparameterizations, which were recently proposed as low-cost TD-DFT-based alternatives to variational methods. Two dye-semiconductor complexes, which were previously investigated in the context of photovoltaic applications, serve as a second example to investigate the convergence and stability of the FRZ-SGM approach. Our results demonstrate that FRZ-SGM provides reliable convergence for charge-transfer excited states and avoids variational collapse to lower-lying electronic states, whereas time-dependent DFT calculations with an adequate tuning procedure for the range-separation parameter provide a computationally efficient initial estimate of the corresponding energies, with a computational cost comparable to that of configuration-interaction singles (CIS) calculations.

Bogo, Nicola↗

OleA Glu117 is key to condensation of two fatty-acyl coenzyme A substrates in long-chain olefin biosynthesis

In the interest of decreasing dependence on fossil fuels, microbial hydrocarbon biosynthesis pathways are being studied for renewable, tailored production of specialty chemicals and biofuels. One candidate is long-chain olefin biosynthesis, a widespread bacterial pathway that produces waxy hydrocarbons. Found in three- and four-gene clusters, oleABCD encodes the enzymes necessary to produce cis-olefins that differ by alkyl chain length, degree of unsaturation, and alkyl chain branching. The first enzyme in the pathway, OleA, catalyzes the Claisen condensation of two fatty acyl-coenzyme A (CoA) molecules to form a β-keto acid. In this report, the mechanistic role of Xanthomonas campestris OleA Glu117 is investigated through mutant enzymes. Crystal structures were determined for each mutant as well as their complex with the inhibitor cerulenin. Complemented by substrate modeling, these structures suggest that Glu117 aids in substrate positioning for productive carbon–carbon bond formation. Analysis of acyl-CoA substrate hydrolysis shows diminished activity in all mutants. When the active site lacks an acidic residue in the 117 position, OleA cannot form condensed product, demonstrating that Glu117 has a critical role upstream of the essential condensation reaction. Profiling of pH dependence shows that the apparent pKa for Glu117 is affected by mutagenesis. Taken together, we propose that Glu117 is the general base needed to prime condensation via deprotonation of the second, non-covalently bound substrate during turnover. This is the first example of a member of the thiolase superfamily of condensing enzymes to contain an active site base originating from the second monomer of the dimer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Subwavelength modulation of surface relief and refractive index in preirradiated liquid-crystalline polymer films

We present a simple method to record subwavelength gratings (SWGs) in an azobenzene (AZ)-containing liquid-crystalline polymer by preirradiation. Since the cooperative motions of mesogens are eliminated in a cis-AZ-rich isotropic phase by the pretreatment, the subwavelength modulation of surface relief and refractive index (RI) was obtained. The surface relief of less than 10 nm and the RI modulation were detected by atomic force microscopy. A large phase retardation and formed birefringence were obtained in the recorded SWGs in which a possible schematic illustration of AZ was proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Infrared absorption spectra of vinyl radicals isolated in solid Ne

Irradiation of samples of solid Ne near 3.0 K containing ethene (C{sub 2}H{sub 4}) with vacuum ultraviolet radiation at 120 nm from synchrotron yielded new spectral lines at 3141.0, 2953.6, 2911.5, 1357.4, 677.1, 895.3, and 857.0 cm{sup -1}. These features are assigned to {alpha}-CH stretching ({nu}{sub 1}), CH{sub 2} antisymmetric stretching ({nu}{sub 2}), CH{sub 2} symmetric stretching ({nu}{sub 3}), CH{sub 2}-bending ({nu}{sub 5}), HCCH cis bending ({nu}{sub 7}), CH{sub 2} out-of-plane bending ({nu}{sub 8}), and {alpha}-CH out-of-plane bending ({nu}{sub 9}) modes of C{sub 2}H{sub 3}, respectively, based on results of {sup 13}C- and D-isotopic experiments and quantum-chemical calculations. These calculations using density-functional theory (B3LYP and PW91PW91/aug-cc-pVTZ) predict vibrational wavenumbers, IR intensities, and isotopic ratios of vinyl radical that agree satisfactorily with our experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum mechanical methods applied to excitation energy transfer: A comparative analysis on excitation energies and electronic couplings

We present a comparative study on the influence of the quantum mechanical (QM) method (including basis set) on the evaluation of transition energies, transition densities and dipoles, and excitation energy transfer (EET) electronic couplings for a series of chromophores (and the corresponding pairs) typically found in organic electro-optical devices and photosynthetic systems. On these systems we have applied five different QM levels of description of increasing accuracy (ZINDO, CIS, TD-DFT, CASSCF, and SAC-CI). In addition, we have tested the effects of a surrounding environment (either mimicking a solvent or a protein matrix) on excitation energies, transition dipoles, and electronic couplings through the polarizable continuum model (PCM) description. Overall, the results obtained suggest that the choice of the QM level of theory affects the electronic couplings much less than it affects excitation energies. We conclude that reasonable estimates can be obtained using moderate basis sets and inexpensive methods such as configuration interaction of single excitations or time-dependent density functional theory when appropriately coupled to realistic solvation models such as PCM.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reversible work function changes induced by photoisomerization of asymmetric azobenzene dithiol self-assembled monolayers on gold

We measured reversible changes in the work function ({delta}{phi}{sub Au}) of gold substrates modified by asymmetric azobenzene dithiol self-assembled monolayers (SAMs) following photoisomerization and thermal recovery of the azo unit. The azobenzene derivative SAMs were photoisomerized to cis form by UV irradiation. {delta}{phi}{sub Au} was monitored in real time during thermal recovery to trans form by ultraviolet photoelectron spectroscopy using a synchrotron light source. Changing the substituted functional group in the p{sup '} position of the azobenzene from electron donating to electron withdrawing resulted in opposite responses of {delta}{phi}{sub Au} against photoisomerization. Hence, a direct correlation between {delta}{phi}{sub Au} and changes in molecular dipole moments was obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetics Of Isomerisation Reaction Of Oriented Polyacetylene Induced By Laser

The impact of a laser's photons ({lambda} = 514.5 nm) on the surface of polyacetylene films (PA), composed of macromolecules PAcis and PAtrans produces simultaneously thermal and Raman diffusion [1]. The thermal effect initializes the isomerization of macromolecules PAcis to PAtrans [2]; this reaction is exothermic. Samples are polyacetylene oriented films synthesized horizontally or vertically in cis configuration and are subject to different laser powers during intervals of time which vary between 20 s and 250 s. The power (P ({lambda}), mW) of the laser is equivalent to the temperature T, of isomerization [3]. Isotherms are constructed and are characterized by the laser power applied. We have established theoretical models calculations with the aim of determining the kinetic parameters of the reaction of isomerization: the activation energy (Ea), the frequency factor of Arrhenius (A), and the rate constant (k). We concluded that even in the field of seconds, the isomerization is a complex process different from a reaction of order: 1, 7/10, 2/3, 3/5, 1/2, 2/5 and 1/4. The order 2/3 being the most suitable. The study determined, among others, the rate constants k 2/3 (T)(of the order 2/3 of the isomerization reaction)= 0.003337244, 0.0052149, 0.0209636, 0.043727 s-1 respectively for Laser powers 30, 120, 200 and 300 mW; activation energy 17.7844 kcal/mol and a factor of collision 19.066816 10{sup 6} s{sup -1}. These results are found to be close to the experimental results studied.

36 MATERIALS SCIENCE↗

Stereoselective isomerization of an ensemble of adsorbed molecules with multiple orientations: Stochastic laser pulse optimization for selective switching between achiral and chiral atropisomers

We present quantum dynamical simulations for the laser driven isomerization of an ensemble of surface mounted stereoisomers with multiple orientations. The model system 1-(2-cis-fluoroethenyl)-2-fluorobenzene supports two chiral and one achiral atropisomers upon torsion around the C-C single bond connecting phenyl ring and ethylene group. An infrared picosecond pulse is used to excite the internal rotation around the chiral axis, thereby controlling the chirality of the molecule. In order to selectively switch the molecules--independent of their orientation on a surface--from their achiral to either their left- or right-handed form, a stochastic pulse optimization algorithm is applied. The stochastic pulse optimization is performed for different sets of defined orientations of adsorbates corresponding to the rotational symmetry of the surface. The obtained nonlinearly polarized laser pulses are highly enantioselective for each orientation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpolating moving least-squares methods for fitting potential energy surfaces : using classical trajectories to explore configuration space.

We develop two approaches for growing a fitted potential energy surface (PES) by the interpolating moving least-squares (IMLS) technique using classical trajectories. We illustrate both approaches by calculating nitrous acid (HONO) cis {yields} trans isomerization trajectories under the control of ab initio forces from low-level HF/cc-pVDZ electronic structure calculations. In this illustrative example, as few as 300 ab initio energy/gradient calculations are required to converge the isomerization rate constant at a fixed energy to {approx}10%. Neither approach requires any preliminary electronic structure calculations or initial approximate representation of the PES (beyond information required for trajectory initial conditions). Hessians are not required. Both approaches rely on the fitting error estimation properties of IMLS fits. The first approach, called IMLS-accelerated direct dynamics, propagates individual trajectories directly with no preliminary exploratory trajectories. The PES is grown 'on the fly' with the computation of new ab initio data only when a fitting error estimate exceeds a prescribed tight tolerance. The second approach, called dynamics-driven IMLS fitting, uses relatively inexpensive exploratory trajectories to both determine and fit the dynamically accessible configuration space. Once exploratory trajectories no longer find configurations with fitting error estimates higher than the designated accuracy, the IMLS fit is considered to be complete and usable in classical trajectory calculations or other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three-dimensional micronanofabrication via two-photon-excited photoisomerization

In this letter, laser micronanofabrication via two-photon absorption initiated isomerization was proposed and explored. Experimentally a cis-form rich poly[2,5-dihexyloxy-1,4-phenylene] vinylene)-alt-(2,5-diphenyl-1,4-phenylene vinylene)] (DPO-PPV) was used as the precursory material, which underwent pinpoint molecular conformational change upon the near-infrared femtosecond laser irradiation. Due to pronouncedly reduced solubility of trans-configuration molecules, the precipitate at the tiny volumes was implemented as voxels to construct two- and three-dimensional micronanostructures. This mechanism may provide an alternative enabling tool other than two-photon absorption initiated polymerization of resins for designable micronanofabrication of photonic or optoelectronic devices including organic electroluminescent devices, particularly those based on PPV and its derivatives.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Theoretical studies on the reaction pathways of electronically excited DAAF

The use of temporally and spectrally shaped ultrafast laser pulses to initiate, as well as detect, high explosives is being explored at Los Alamos. High level ab initio calculations, presented here, are employed to help guide and interpret the experiments. The ground and first excited electronic states of 3,3{prime}-diamino-4,4{prime}-azoxyfurazan (DAAF) are investigated using complete active space self-consistent field (CASSCF) and time-dependent density functional theory (TD-DFT). The geometrical and energetic character of the excited state minima, conical intersections and reaction pathways of DAAF are described. Two radiative and two non-radiative excited state population quenching mechanisms are outlined, and possible pathways for photochemical and spectroscopic control are discussed. The use of laser light to control chemical reactions has many applications. The initiation and the detection of explosives are two such applications currently under development at Los Alamos. Though inherently experimental, the project can be aided by theory through both prediction and interpretation. When the laser light is in the UV/visible region of the electromagnetic spectrum, the absorbing molecule is excited electronically and excitation decay may occur either radiatively (fluorescence or phosphorescence) or non-radiatively (through internal conversion). In many cases decay of the excitation occurs through a mixture of processes, and maximizing the desired result requires sophisticated laser pulses whose amplitude has been optimally modulated in time and/or frequency space. Control of cis-stilbene photochemistry was recently demonstrated in our group, and we aim to extend this work to high explosive compounds. Maximizing radiative decay leads to increased fluorescence quantum yields and enhances the possibility of spectral detection of the absorbing molecule. Maximizing non-radiative decay can lead to chemistry, heating of the sample and possibly detonation initiation in an explosive compound. Here we describe high level quantum chemistry calculations aimed at mapping the electronic states involved in excitation of 3,3{prime}-Diamino-4,4{prime}-azoxyfurazan (DAAF) with 400-nm light. DAAF is a high-nitrogen high explosive that is of interest for its relative insensitivity to shock compression. The goal of the theoretical work described here is to determine the competing pathways for radiative and non-radiative electronic state quenching in an effort to help guide spectroscopic experiments being conducted in tandem.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Towards coherent control of energetic material initiation

Direct optical initiation (DOI) of energetic materials using coherent control of localized energy deposition requires depositing energy into the material to produce a critical size hot spot, which allows propagation of the reaction and thereby initiation, The hot spot characteristics needed for growth to initiation can be studied using quantum controlled initiation (QCI). Achieving direct quantum controlled initiation (QCI) in condensed phase systems requires optimally shaped ultrafast laser pulses to coherently guide the energy flow along the desired paths. As a test of our quantum control capabilities we have successfully demonstrated our ability to control the reaction pathway of the chemical system stilbene. An acousto-optical modulator based pulse shaper was used at 266 nm, in a shaped pump/supercontinuum probe technique, to enhance and suppress th relative yields of the cis- to trans-stilbene isomerization. The quantum control techniques tested in the stilbene experiments are currently being used to investigate QCI of the explosive hexanitroazobenzene (HNAB).

47 OTHER INSTRUMENTATION↗