Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alternative Identifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L 2,3 -edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe I dopant ions to be linearly coordinated, occupying a D 6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L 2,3 -edge XAS from which the energy reduction of 3d z 2 due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L 3 -edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (~280 cm –1 ), that corresponds with Orbach relaxation via the first excited, M J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Variations in cell wall traits impact saccharification potential of Salix famelica and Salix eriocephala

Increasing global populations, finite arable land, and the anthropogenic release of carbon dioxide into the atmosphere are driving the search for bio-based alternatives to the petroleum-derived fuels and chemicals that underpin the global economy. With rapid growth rates, a propensity for coppicing, and a wide geographic range across Canada, native shrub willows (Salix spp.) are an attractive source of low-input, high-volume biomass. To date, most willow research has focused on increasing yields and improving cropping systems, while comparatively little work has been done to assess the intrinsic diversity in cell wall traits and bioenergy potential. In this study, we characterized the cell wall composition and wood ultrastructure of 338 xylem samples from two Canadian willow species, Salix famelica and Salix eriocephala, harvested from a common garden experimental plot. Lignin content ranged from 17.5–25.1% in S. famelica and 18.6–24.3% in S. eriocephala. Following alkali pretreatment with 62.5 mM NaOH at 90 °C for 3 h and a 70-h enzymatic digestion with Accellerase 1000, glucose release ranged from 23.0–38.9 wt% in S. famelica and from 20.5–37.7 wt% in S. eriocephala, while xylose release ranged from 9.4–14.9% in S. famelica and from 9.5–15.2% in S. eriocephala. Here, partial least squares regression modelling showed that lignin content and composition were important negative regulators of glucose release. Overall, this work highlights the innate variability in cell wall traits of native willows and identifies potential genotypes that should be considered in future breeding and deployment strategies for Canadian bioenergy production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Gluon splitting at small x: a unified derivation for the JIMWLK, DGLAP and CSS equations

We revisit the calculation of the next-to-leading order (NLO) corrections to dijet production in electron-ion collisions at small x. We focus on the back-to-back configuration where the relative transverse momentum P ⊥ of the measured jets is much larger than both their momentum imbalance K ⊥ and the target saturation momentum Q s (x, A). In this regime, we present for the first time a complete calculation of the real NLO corrections, associated with gluon emissions outside the jet cones, at leading power in 1/P ⊥ . Our result exhibits TMD factorisation, with the same hard factor as at tree-level and a NLO correction to the Weiszäcker-Williams (WW) gluon transverse momentum dependent (TMD) distribution which involves four Wilson-line operators. By studying different kinematical regimes for K ⊥ and for the radiated gluon, we recover all the quantum evolutions that were previously identified for this process at NLO: the B-JIMWLK high-energy evolution and the CSS evolution of the gluon WW TMD, and the DGLAP evolution of the gluon PDF. When both K ⊥ and the transverse momentum transferred by the target are large compared to Q s , all the Wilson-line operators boil down to the unintegrated gluon distribution and our NLO result for the gluon TMD can be used to isolate the transverse-momentum dependent gluon splitting function.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Adaptive Sampling for In Situ Cloud Probe (Final Report)

Clouds play a leading role in the Earth's global energy and solar radiation balance and hydrological cycle. Improving cloud models requires detailed information on the cloud microphysical properties, such as droplet size distribution and number density, liquid water content and cloud composition (droplets, ice particles), which can only be provided by aerial in situ measurements. However, for many atmospheric measurement instruments, the lack of flexibility in selecting the operational mode during operation can lead to uncertainties in sampling and measurement characteristics under continuously varying atmospheric conditions. This SBIR project is developing an advanced, compact optical imaging technology for in situ characterization of cloud hydrometeors. The development involves a deep modification of the existing Mesa Photonics’ Cloud Droplet Measurement System (CDMS) in order to implement real-time automatic adaptive sampling based on the acquired in situ data and environmental parameters. The new system, CDMS-2, implements two measurement modes: side-scatter imaging for smaller hydrometeors and direct bright-field-illumination imaging for larger hydrometeors in a significantly larger sample volume. The system measures the droplet size distribution (DSD) and number density with an added capability of discriminating between liquid water and ice hydrometeors (based on polarization-resolved side-scatter imaging). The instrument will implement automatic switching or alternating between the regular side-scatter imaging mode and sparse/large hydrometeor mode (based on the acquired data). Other adaptive sampling capabilities include variable sample volume and dynamic range (based on the measured DSD). The preferred deployment platforms are uncrewed aircraft systems (UAS) and tethered balloon/kite systems (TBS). The Phase I project achieved (or exceeded) the goals listed in the Work Plan. A CDMS-2 laboratory prototype implementing the polarization-resolved side-scatter imaging mode and direct bright-field-illumination imaging mode was designed and built. Additional capabilities included the variable illumination pulse energy and sample volume. The smallest detectable droplet diameter was improved to 3–4 μm (from the nominal 10 μm value specified for the original CDMS). Discrimination between water droplets and ice particles was experimentally demonstrated. The Phase I prototype was extensively tested and calibrated in the laboratory and also tested in the Pi Cloud Chamber at Michigan Technological University (MTU). The two intensive experimental campaigns at MTU provided unique opportunities of testing the CDMS-2 laboratory prototype under realistic warm and mixed-phase cloud conditions (stable for long periods of time), testing different sampling modes and intercomparing the CDMS-2 prototype to other co-located cloud characterization instruments. The Phase I project successfully demonstrated the feasibility of the proposed technology and identified the engineering challenges of designing a field deployable prototype instrument in Phase II. The Phase I study provides a solid basis for development, characterization and field-testing of the proposed advanced cloud probe with adaptive sampling in Phase II followed by commercialization of the technology in Phase III.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Solar Resource and Infrastructure Assessment for the Town of Blandford

This report is a solar resource and infrastructure assessment for the town of Blandford, Massachusetts. The assessment was funded through the National Renewable Energy Laboratory, Solar Energy Innovation Network (NREL SEIN) Solar in Rural Communities Program, as part of a project to develop a Community-Informed Proactive Solar Siting and Financing Model. As a first step, the project lead organization, UMass Clean Energy Extension prepared an assessment of existing infrastructure, resources, and potential solar development opportunities in participating municipalities, including Blandford. This assessment was designed to describe relevant bylaws and infrastructure within the town, identify the types of solar facilities that could be developed, and quantify the total space available for each type of facility. In this report, we reviewed existing electricity grid infrastructure, and the potential to interconnect additional solar facilities. At the present time, most distribution lines providing electricity to Blandford are over-saturated with authorized and proposed solar projects, and cannot accommodate additional solar projects to interconnect to the grid. We can expect significant upgrades to these circuits, if any of the in-process projects are to proceed, which might then free up additional capacity for new projects. There is one circuit which serves a section of North Blandford Road that is not over-saturated; for the immediate future, this is the most cost-effective location for new large-scale projects to be sited. Meanwhile, most three-phase lines could likely accommodate additional small-to-medium scale projects (under 200 kW), and most single-phase lines could likely accommodate additional projects under 50 kW in size. This description represents the local grid infrastructure as it is - planning for future scenarios of development could include recommendations for areas of grid infrastructure improvement to allow siting of distributed generation in preferred locations. Future scenarios may also include the addition energy storage and other "non-wires alternatives."

14 SOLAR ENERGY↗
DOE OSTI2025

Circumventing Radical Generation on Fe–V Atomic Pair Catalyst for Robust Oxygen Reduction and Zinc–Air Batteries

Iron–nitrogen–carbon (Fe–N–C) catalysts are considered the most active platinum-free alternative for oxygen reduction reaction (ORR), yet the generated reactive oxygen species (ROS) from general mechanistic pathway rapidly impair the ORR activity and stability of Fe–N–C. Herein, we establish and report an ORR pathway-switching strategy to circumvent ROS generation and fundamentally improve the activity and stability of Fe–N–C via DFT guided catalyst design. The constructed Fe–V atomic pair catalyst (Fe 1 V 1 -NC) with N 2 Fe-N 2 -VN 2 configuration enables side-on adsorption of O 2 and subsequent direct-breaking of the O═O bond to form O*, thereby avoiding the formation of ROS radicals. Importantly, there is intersite electron interaction between FeN 4 and VN 4 , which further boosts the ORR activity. Consequently, Fe 1 V 1 -NC exhibits outstanding ORR activity with onset and half-wave (E 1/2 ) potentials at 1.02 and 0.89 V versus RHE, respectively, in 0.1 M KOH. Record-high stability is achieved on Fe 1 V 1 -NC with a minimal decay in E 1/2 by 16 mV over 50000 cycles, surpassing Fe–N–C counterpart and most of the catalysts reported to date. The Fe 1 V 1 -NC-based zinc-air battery reported here demonstrates exceptional durability up to 400 h at 10 mA·cm −2 . This work identifies the intrinsic correlation between ORR pathway, activity, and stability, advancing development of stable catalytic systems.

Fe-N-C↗
DOE OSTI2024

Gamma-Ray and Cosmic Ray Muon Modalities for Cargo Inspection

Screening and inspection of cargo containers are two essential methods to nondestructively examine the contents of shipment. These methods enable the detection of illicit transportation of unauthorized materials such as nuclear and radioactive materials, explosives, drugs, and so on, typically at borders or secure facilities. Although high-energy X-ray transmission is a standard system and is widely used for cargo inspection, the inherent challenges of high false-positive rates and high attenuation factors necessitate the development of complementary techniques that can increase the detection efficiency and accuracy in large and dense materials. Gamma-rays, which possess higher penetration characteristics because of their high energy, offer an alternative nonintrusive modality for cargo scanning. They represent a promising inspection method when compared to X-rays for three reasons: (1) improved ability to detect nuclear and radioactive materials, (2) higher inspection throughput rates, and (3) lower false-positive rates. Currently, there are two main gamma-ray inspection techniques, active and passive interrogation. Active interrogation can be further grouped into (1) gamma-ray transmission imaging and (2) neutron-induced gamma-ray emission detection. Gamma-ray transmission imaging utilizes differences in material densities for mapping the shipment contents and detecting anomalies. It is analogous to the X-ray transmission method; however, the high-energy photons make it more difficult to shield against, which enables more efficient performance in large and dense material inspection. Neutron-induced gamma-ray emission inspection is designed for the detection of nuclear and radioactive material because those materials emit characteristic gamma-rays when they are activated by neutron absorption. On the other hand, passive interrogation techniques rely on high-efficiency detectors to detect radiation emitted from hidden special nuclear or other radioactive materials. Similar to passive interrogation, cosmic ray muon monitoring and imaging are relatively new techniques that do not require external radioactive sources. These techniques have received attention as a potential next-generation radiographic probe to identify illicit transportation of nuclear and radioactive materials in cargo containers. Cosmic ray muons have unique features, (1) much higher energies than X-rays or gamma-rays (on the order of 10−1—104 GeV), (2) enhanced penetration capability, and (3) natural occurrence, thereby eliminating the need for induced radiation sources. These features enable cosmic ray muons to be utilized for detection of special nuclear materials in high-background-noise environments. By analyzing incoming and outgoing muon trajectories, scattering angles, and energies, it has been shown that it would be possible to locate hidden and well-shielded materials in cargo containers via three-dimensional muon tomography images or signal analysis. Gamma-rays, cosmic ray muons, and other nonintrusive cargo inspection modalities are complementary to each other, allowing them to address various cargo inspection conditions (i.e., scanning time, cost, radiation exposure level, and types of target materials). This chapter presents a detailed review of the theoretical fundamentals and technical principles behind the current gamma-ray and cosmic ray muon modalities for cargo inspection. Additionally, critical assessments and suggestions for the future directions to advance the use of gamma and muon modalities are discussed.

Bae, Junghyun↗
DOE OSTI2024

Development and cross‐validation of a circumference‐based predictive equation to estimate body fat in an active population

Abstract Objective The U.S. Army uses sex‐specific circumference‐based prediction equations to estimate percent body fat (%BF) to evaluate adherence to body composition standards. The equations are periodically evaluated to ensure that they continue to accurately assess %BF in a diverse population. The objective of this study was to develop and validate alternative field expedient equations that may improve upon the current Army Regulation (AR) body fat (%BF) equations. Methods Body size and composition were evaluated in a representatively sampled cohort of 1904 active‐duty Soldiers (1261 Males, 643 Females), using dual‐energy X‐ray absorptiometry (%BF DXA ), and circumferences obtained with 3D imaging and manual measurements. Sex stratified linear prediction equations for %BF were constructed using internal cross validation with %BF DXA as the criterion measure. Prediction equations were evaluated for accuracy and precision using root mean squared error, bias, and intraclass correlations. Equations were externally validated in a convenient sample of 1073 Soldiers. Results Three new equations were developed using one to three circumference sites. The predictive values of waist, abdomen, hip circumference, weight and height were evaluated. Changing from a 3‐site model to a 1‐site model had minimal impact on measurements of model accuracy and performance. Male‐specific equations demonstrated larger gains in accuracy, whereas female‐specific equations resulted in minor improvements in accuracy compared to existing AR equations. Equations performed similarly in the second external validation cohort. Conclusions The equations developed improved upon the current AR equation while demonstrating robust and consistent results within an external population. The 1‐site waist circumference‐based equation utilized the abdominal measurement, which aligns with associated obesity related health outcomes. This could be used to identify individuals at risk for negative health outcomes for earlier intervention.

Taylor, Kathryn M.↗
DOE OSTI2020

Fuel molecular structure effect on autoignition of highly branched iso-alkanes at low-to-intermediate temperatures: Iso-octane versus iso-dodecane

Highly branched iso-alkanes are an important class of hydrocarbons found in conventional petroleum-derived and alternative renewable fuels used for combustion applications. Recognizing that chemical kinetics for most of these iso-alkanes, especially at low-to-intermediate temperatures, has not been well studied, an experimental and modeling investigation of two selected iso-alkanes, iso-octane (2,2,4-trimethylpentane, iC8) and iso-dodecane (2,2,4,6,6-pentamethylheptane, iC12), is conducted to understand the fuel molecular structure effect on their autoignition characteristics. Using a rapid compression machine (RCM), the ignition responses of iC8 and iC12 at varying pressures, temperatures, and equivalence ratios are characterized and compared. The newly-acquired experimental ignition delay times have been compared with the literature RCM and shock tube data, demonstrating the complementary nature of the current dataset. Further comparison of the experimental pressure traces and ignition delay times illustrates the reactivity crossover between iC8 and iC12. Namely, there exists a temperature window in the negative temperature coefficient regime within which iC12 is less reactive than iC8, but iC12 becomes more reactive outside this temperature window. Furthermore, a chemical kinetic model of iso-alkanes including both iC8 and iC12 is developed. Simulated results using this model are then compared to the experimental data obtained in this study and available in the literature, showing its ability to predict the experimental trends. Chemical kinetic analyses have also been conducted to identify the important reaction pathways controlling autoignition at varying conditions, and to elucidate the underlying mechanism leading to different reactivity trends between iC8 and iC12.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Performance Evaluation of Comparative Vacuum Monitoring and Piezoelectric Sensors for Structural Health Monitoring of Rotorcraft Components

The costs associated with the increasing maintenance and surveillance needs of aging structures are rising at an unexpected rate. Multi-site fatigue damage, hidden cracks in hard-to-reach locations, disbonded joints, erosion, impact, and corrosion are among the major flaws encountered in today’s extensive fleet of aging aircraft and space vehicles. Aircraft maintenance and repairs represent about a quarter of a commercial fleet’s operating costs. The application of Structural Health Monitoring (SHM) systems using distributed sensor networks can reduce these costs by facilitating rapid and global assessments of structural integrity. The use of in-situ sensors for real-time health monitoring can overcome inspection impediments stemming from accessibility limitations, complex geometries, and the location and depth of hidden damage. Reliable, structural health monitoring systems can automatically process data, assess structural condition, and signal the need for human intervention. The ease of monitoring an entire on-board network of distributed sensors means that structural health assessments can occur more often, allowing operators to be even more vigilant with respect to flaw onset. SHM systems also allow for condition-based maintenance practices to be substituted for the current time-based or cycle-based maintenance approach thus optimizing maintenance labor. The Federal Aviation Administration has conducted a series of SHM validation and certification programs intended to comprehensively support the evolution and adoption of SHM practices into routine aircraft maintenance practices. This report presents one of those programs involving a Sandia Labs-aviation industry effort to move SHM into routine use for aircraft maintenance. The Airworthiness Assurance NDI Validation Center (AANC) at Sandia Labs, in conjunction with Sikorsky, Structural Monitoring Systems Ltd., Anodyne Electronics Manufacturing Corp., Acellent Technologies Inc., and the Federal Aviation Administration (FAA) carried out a trial validation and certification program to evaluate Comparative Vacuum Monitoring (CVM) and Piezoelectric Transducers (PZT) as a structural health monitoring solution to specific rotorcraft applications. Validation tasks were designed to address the SHM equipment, the health monitoring task, the resolution required, the sensor interrogation procedures, the conditions under which the monitoring will occur, the potential inspector population, adoption of CVM and PZT systems into rotorcraft maintenance programs and the document revisions necessary to allow for their routine use as an alternate means of performing periodic structural inspections. This program addressed formal SHM technology validation and certification issues so that the full spectrum of concerns, including design, deployment, performance and certification were appropriately considered. Sandia Labs designed, implemented, and analyzed the results from a focused and statistically relevant experimental effort to quantify the reliability of a CVM system applied to Sikorsky S-92 fuselage frame application and a PZT system applied to an S-92 main gearbox mount beam application. The applications included both local and global damage detection assessments. All factors that affect SHM sensitivity were included in this program: flaw size, shape, orientation and location relative to the sensors, as well as operational and environmental variables. Statistical methods were applied to performance data to derive Probability of Detection (POD) values for SHM sensors in a manner that agrees with current nondestructive inspection (NDI) validation requirements and is acceptable to both the aviation industry and regulatory bodies. The validation work completed in this program demonstrated the ability of both CVM and PZT SHM systems to detect cracks in rotorcraft components. It proved the ability to use final system response parameters to provide a Green Light/Red Light (“GO” – “NO GO”) decision on the presence of damage. In additional to quantifying the performance of each SHM system for the trial applications on the S-92 platform, this study also identified specific methods that can be used to optimize damage detection, guidance on deployment scenarios that can affect performance and considerations that must be made to properly apply CVM and PZT sensors. These results support the main goal of safely integrating SHM sensors into rotorcraft maintenance programs. Additional benefits from deploying rotorcraft Health and Usage Monitoring Systems (HUMS) may be realized when structural assessment data, collected by an SHM system, is also used to detect structural damage to compliment the operational environment monitoring. The use of in-situ sensors for health monitoring of rotorcraft structures can be a viable option for both flaw detection and maintenance planning activities. This formal SHM validation will allow aircraft manufacturers and airlines to confidently make informed decisions about the proper utilization of CVM and PZT technology. It will also streamline future regulatory actions and formal certification measures needed to assure the safe application of SHM solutions.

42 ENGINEERING↗
DOE OSTI2022

How the Bioinspired Fe 2 Mo 6 S 8 Chevrel Breaks Electrocatalytic Nitrogen Reduction Scaling Relations

The nitrogen reduction reaction (NRR) is a renewable alternative to the energy- and CO 2 -intensive Haber–Bosch NH 3 synthesis process but is severely limited by the low activity and selectivity of studied electrocatalysts. The Chevrel phase Fe 2 Mo 6 S 8 has a surface Fe–S–Mo coordination environment that mimics the nitrogenase FeMo-cofactor and was recently shown to provide state-of-the-art activity and selectivity for NRR. Here, we elucidate the previously unknown NRR mechanism on Fe 2 Mo 6 S 8 via grand-canonical density functional theory (GC-DFT) that realistically models solvated and biased surfaces. Fe sites of Fe 2 Mo 6 S 8 selectively stabilize the key *NNH intermediate via a narrow band of free-atom-like surface d-states that selectively hybridize with p-states of *NNH, which results in Fe sites breaking NRR scaling relationships. These sharp d-states arise from an Fe–S bond dissociation during N 2 adsorption that mimics the mechanism of the nitrogenase FeMo-cofactor. Furthermore, we developed a new GC-DFT-based approach for calculating transition states as a function of bias (GC-NEB) and applied it to produce a microkinetic model for NRR at Fe 2 Mo 6 S 8 that predicts high activity and selectivity, in close agreement with experiments. Furthermore, our results suggest new design principles that may identify effective NRR electrocatalysts that minimize the barriers for *N 2 protonation and *NH 3 desorption and that may be broadly applied to the rational discovery of stable, multinary electrocatalysts for other reactions where narrow bands of surface d-states can be tuned to selectively stabilize key reaction intermediates and guide selectivity toward a target product. Furthermore, our results highlight the importance of using GC-DFT and GC-NEB to accurately model electrocatalytic reactions.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Developing Non-Food Grade Brassica Biofuel Feedstock Cultivars with High Yield, Oil Content, and Oil Quality that are Suitable for Low Input Production Dryland Systems (Final Report)

The U.S. uses a substantial amount of fossil fuel as an energy source for a wide range for functions including home heating, agriculture and transportation. In the transportation sector, diesel and jet fuel are consumed at a rapid rate, and alternative liquid energy is being investigated globally and nationally to reduce our dependence on fossil fuel and reduce the impact of our carbon footprint on global climate change. Non-food Brassica crops have the potential of producing high oil yield (over 250 gal acre-1) and have oil quality highly desirable for use as biodiesel or bio jet fuel. Developing oilseed feedstock Brassica cultivars with higher seed and oil yield, with high oil quality and with resistance to pathogens, that can be grown with few chemical inputs will helping break our dependence on fossil fuels and reduce importation of fossil fuels. While some oilseed Brassicas have been grown on a small scale for many years in the Pacific Northwest (PNW), adoption has been limited, and the potential of the crops have not been realized or even fully investigated. This report summarizes the results of a study to develop superior non-food grade winter (B. napus) and spring (B. napus and B. juncea) oilseed cultivars suitable for a range of PNW, and other US environments with high resistance to the biotic and abiotic stresses suitable for high-quality biofuel feedstocks. In conducting this work, genome-wide association selection was used to dissect the genetic architecture of industrial Brassica oilseed germplasm for yield, quality, and resistance to biotic and abiotic stresses. A genome-wide bioinformatics approach was used to identify putative PRR (pattern recognition receptor) - type resistance genes that confer durable resistance to blackleg. A novel transgenic approach was developed to generate resistant non-food oilseed lines using PPR genes Br1033 and Br8486. These genes were inserted into regionally adapted oilseed cultivars.

09 BIOMASS FUELS↗
DOE OSTI2023

Utilizing high-resolution genetic markers to track population-level exposure of migratory birds to renewable energy development

With new motivation to increase the proportion of energy demands met by zero-carbon sources, there is a greater focus on efforts to assess and mitigate the impacts of renewable energy development on sensitive ecosystems and wildlife, of which birds are of particular interest. One challenge for researchers, due in part to a lack of appropriate tools, has been estimating the effects from such development on individual breeding populations of migratory birds. To help address this, we utilize a newly developed, high-resolution genetic tagging method to rapidly identify the breeding population of origin of carcasses recovered from renewable energy facilities and combine them with maps of genetic variation across geographic space (called ‘genoscapes’) for five species of migratory birds known to be exposed to energy development, to assess the extent of population-level effects on migratory birds. We demonstrate that most avian remains collected were from the largest populations of a given species. In contrast, those remains from smaller, declining populations made up a smaller percentage of the total number of birds assayed. Results suggest that application of this genetic tagging method can successfully define population-level exposure to renewable energy development and may be a powerful tool to inform future siting and mitigation activities associated with renewable energy programs.

14 SOLAR ENERGY↗
DOE OSTI2025

A Cocatalytic System for Electrooxidation of Primary, Secondary, and Benzyl Alcohols Based on a Triruthenium Oxo-Centered Cluster and NHPI

Increasing interest in alternative methods for fuel generation and chemical synthesis has resulted in an increased focus on the development of electrocatalysts for energy relevant small molecule transformations, such as the oxidation of methanol. Partial methanol oxidation is a crucial step in the generation of the commodity chemical formaldehyde, and its complete oxidation to carbon dioxide can also serve as the anodic reaction in direct methanol fuel cells. We report a coelectrocatalytic system comprised of an oxo-centered triruthenium cluster (Ru 3 O) as the catalyst, with the electro-generated N-phthalimido-N-oxyl (PINO) radical species acting as a redox mediator. Only a mild Brønsted base, 2,6-lutidine, is required to achieve an electrocatalytic response. The cocatalytic system demonstrates remarkable cooperativity, shifting the oxidation potential of MeOH (Ep) less positive by ca. 0.5 V compared to the intrinsic response of the Ru 3 O complex. Controlled potential electrolysis on a model substrate, 4-trifluoromethylbenzyl alcohol, demonstrates selective production of the two-electron, two-proton aldehyde product with a Faradaic efficiency of 79 ± 11% at a rate of 3.14 s –1 . The rate of cocatalysis is 50-fold greater than the intrinsic activity of Ru3O and 26-fold greater than that of PINO alone under otherwise identical conditions. Mechanistic studies reveal the oxidation of a Ru 3 O–alkoxide species as the potential-determining step, while two possible rate-determining steps are identified depending on the substrate. A preference for sterically uninhibited electron-rich benzyl alcohol substrates suggests that a H atom transfer from the Ru 3 O–alkoxide adduct to PINO is rate-determining, while the lack of an observed kinetic isotope effect using deuterated MeOH suggests the oxidation of the Ru 3 O–alkoxide species is both rate- and potential-determining for cocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Inter-well connectivity detection in CO 2 WAG projects using statistical recurrent unit models

Routine well-wise injection and production measurements contain significant information on subsurface structure and properties. Data-driven technology that interprets surface data into subsurface structure or properties can assist operators in making informed decisions by providing a better understanding of field assets. Our machine-learning framework is built on the statistical recurrent unit (SRU) model and interprets well-based injection/production data into inter-well connectivity without relying on a geologic model. We test it on synthetic and field-scale CO 2 EOR projects utilizing the water-alternating-gas (WAG) process. SRU is a special type of recurrent neural network (RNN) that allows for better characterization of temporal trends, by learning various statistics of the input at different time scales. In our application, the complete states (injection rate, pressure and cumulative injection) at injectors and pressure states at producers are fed to SRU as the input and the phase rates at producers are treated as the output. Once the SRU is trained and validated, it is then used to assess the connectivity of each injector to any producer using permutation variable importance method, wherein inputs corresponding to an injector are shuffled and the increase in prediction error at a given producer is recorded as the importance (connectivity metric) of the injector to the producer. This method is tested in both synthetic and field-scale cases. The validation of the proposed data-driven inter-well connectivity assessment is performed using synthetic data from simulation models where inter-well connectivity can be easily measured using the streamline-based flux allocation. The SRU model is shown to offer excellent prediction performance on the synthetic case. Despite significant measurement noise and frequent well shut-ins imposed in the field-scale case, the SRU model offers good prediction accuracy, the overall relative error of the phase production rates at most producers ranges from 10% to 30%. It is shown that the dominant connections identified by the data-driven method and streamline method are in close agreement. This significantly improves confidence in our data-driven procedure. The novelty of this work is that it is purely data-driven method and can directly interpret routine surface measurements to intuitive subsurface knowledge. Furthermore, the streamline-based validation procedure provides physics-based backing to the results obtained from data analytics. This study results in a reliable and efficient data analytics framework that is well-suited for large field applications.

42 ENGINEERING↗
DOE OSTI2026

Principles and Options for Designing Battery Energy Storage Zoning Ordinances

Deployment of battery energy storage (BESS) systems, both standalone and as part of hybrid systems paired with generation, has rapidly increased in the United States in recent years as utilities and communities have deployed storage to improve electric grid reliability and act as a cost-effective alternative to larger grid infrastructure. The modular nature of BESS technologies means systems may be built near other existing land uses, creating the potential for conflicts with neighboring landowners that can be managed and mitigated through zoning and permitting requirements established by local jurisdictions. While many cities and counties have adopted ordinances specific to BESS into their local zoning codes, these ordinances vary significantly in their requirements and level of detail. Meanwhile, many other jurisdictions, including those home to proposed or existing BESS projects, lack any specific language related to BESS in their zoning codes. Local planning and zoning officials have limited capacity and may lack the familiarity with BESS technologies needed to develop ordinances or otherwise make reasonable zoning decisions that balance safety, community impacts, and other goals. The resulting uncertainty at the local zoning level has led developers to withdraw projects in some areas and has spurred moratoria or bans on energy storage projects in others. This report intends to provide practical resources for practitioners interested in reasonable and effective local regulation of battery energy storage. It does not present a model zoning ordinance, but rather is intended to complement model ordinances developed by others by providing additional context and analysis regarding the structure of energy storage zoning ordinances and the decision points for local officials. Zoning ordinances at the city, town, and county level across the U.S. were surveyed alongside two template model ordinances to identify common elements and options for regulating the zoning and siting of BESS. Common elements identified and analyzed include definitions and general requirements, including cutoffs or tiers used to apply regulations to different system sizes and the permitted zones where jurisdictions allow BESS to be sited; visual, noise, and aesthetic requirements, including property line setbacks, fencing and visual screening, noise, and lighting requirements; and safety and planning requirements, such as site plans, decommissioning plans or funds, and requirements for access by emergency services. The report also summarizes some of the more unique regulations, including those that place additional restrictions on BESS at the local level.

25 ENERGY STORAGE↗
DOE OSTI2022

Transient superconductivity at nano- and meso-scales

High-T c superconductivity is surpassed by few, if any, other unsolved problems in contemporary physics in terms of its richness, complexity, impact on other fields, and potential technological importance in energy applications. Recent discoveries reveal that the highest transition temperatures emerge under extraordinary experimental conditions such as the strong perturbation of a single atomic layer material by the underlying substrate, application of ~200 GPa pressure or ~MV/cm static electric fields, or irradiation by intense femtosecond optical fields. Research in superconductivity under extreme experimental conditions is challenging and requires the development of novel experimental methods and new theoretical tools suitable to tackle the problem. Our team has approached the challenges of transient superconductivity under intense optical fields by rethinking the types of experimental observables that are best suited to elucidate the physics of light-induced effects. This exercise has identified the need for: i) ultra-fast spatio-temporal probes enabling access to plasmonic properties and also nano-scale inhomogeneities that are ubiquitous in unconventional superconductors; ii) meso-scale structures and hybrid meta-surfaces imperative for strong enhancement of optical fields and iii) theoretical approaches suitable to explain and predict the response of superconductors under ultra-fast photo-excitation. Co-PIs have already made major advances with developing capabilities i)-iii). Therefore, our team is poised to make significant progress in transient superconductivity by exploring novel spatio-temporal effects that currently remain unattainable. Co-investigators will search for light-induced superconductivity in the high-T c cuprates to build upon spectacular recent results still lacking independent confirmations. Novel data acquisition methods combined with nano-plasmonic imaging will allow our team to test the hypothesis of photo-induced superconducting pairing. Spatio-temporal experiments will provide insights into the interplay between superconductivity and competing orders in the cuprates. Co-PIs will also investigate strong light-matter interaction and superconductivity in FeSe monolayers. Finally, we will study spatio-temporal electrodynamics of planar Josephson junctions. This latter direction will allow our team to thoroughly characterize one of the most fundamental examples of inhomogeneity in all of unconventional superconductivity. The proposed experiments in combination with theoretical analysis will provide information that is difficult to obtain using alternative methods. Basov and Averitt will carry out pump-probe spectroscopy and nano-imaging experiments. Averitt and Hone will design and fabricate state-of-the-art meta-surfaces. Theoretical and computational studies of ultrafast transient phenomena will be carried out by Millis and Fogler. Modeling of time-resolved nano-optical effects will be done by Fogler. The bulk of the requested budget will be used to support graduate students at Columbia & UCSD that will be co-supervised by co-PIs. The proposed program is transformative, since it will enable an entire suite of experiments previously either impossible or technically implausible. It will deliver critically important insights not only into mechanisms of unconventional superconductivity but also to many other correlated quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Gold Nanoparticles AuNP Decorated on Fused Graphene-like Materials for Application in a Hydrogen Generation

The search for a sustainable, alternative fuel source to replace fossil fuels has led to an increased interest in hydrogen fuel. This combustible gas is not only clean-burning but can readily be produced via the hydrolysis of sodium borohydride. The main drawback of this reaction is that the reaction occurs relatively slowly and requires a catalyst to improve efficiency. This study explored a novel composite material made by combining gold nanoparticles and fused graphene-like materials (AuFGLM) as a catalyst for generating hydrogen via sodium borohydride. The novel fused graphene-like material (FGLM) was made with a sustainable dextrose solution and by using a pressure-processing method. Imaging techniques showed that FGLM appears to be an effective support template for nanoparticles. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Raman spectroscopy were used to characterize and determine the size, shape, and structure of nanoparticles and composites. The TEM study characterized the fused carbon backbone as it began to take on a rounder shape. The TEM images also revealed that the average diameter of the gold nanoparticle was roughly 23 nm. The FTIR study confirmed O-H, C-C, and C=O as functional groups in the materials. The EDS analysis showed that the composite contained approximately 6.3% gold by weight. The crystal structures of FGLM and AuFGLM were identified via P-XRD analysis. Various reaction conditions were used to test the catalytic ability of AuFGLM, including various solution pHs, temperatures, and doses of NaBH 4 . It was observed that optimal reaction conditions included high temperature, an acidic solution pH, and a higher dose of NaBH 4 . The activation energy of the reaction was determined to be 45.5 kJ mol -1 , and it was found that the catalyst could be used multiple times in a row with an increased volume of hydrogen produced in ensuing trials. The activation energy of this novel catalyst is competitive compared to similar catalysts and its ability to produce hydrogen over multiple uses makes the material an exciting choice for catalyzing the hydrolysis of NaBH 4 for use as a hydrogen fuel source.

08 HYDROGEN↗