SEARCH · Engineering Papers

Results for “Accelerator design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

All sources NASA NTRS DOE OSTI

NASA NTRS1982

The phototron: A light to RF energy conversion device

The phototron, a photoelectric device that converts light to radio frequency energy, is described. It is a vacuum tube, free electron, device that is mechanically similar to a reflex klystron with the hot filament cathode replaced by a large area photocathode. The device can operate either with an external voltage source used to accelerate the photoelectrons or with zero bias voltage; in which case the photokinetic energy of the electrons sustains the R.F. oscillations in the tuned R.F. circuit. One basic design of the phototron was tested. Frequencies as high as about 1 GHz and an overall efficiency of about 1% in the biased mode were obtained. In the unbiased mode, the frequencies of operation and efficiences are considerably lower. Success with test model suggests that considerable improvements are possible through design refinements. One such design refinement is the reduction of the length of the electron flight path.

Freeman, J. W.↗

NASA NTRS1993

Distributed parallel processing applied to an implicit multigrid Euler/Navier-Stokes algorithm

An implicit multigrid algorithm for the solution of the Euler and Navier-Stokes equations has been implemented within the framework of multiple block-structured grids in which the physical domain is spatially decomposed into several blocks and the solution is advanced in parallel on each block. Utilities have been developed to implement such a scheme in a distributed computing environment. The multi-block algorithm is designed so that the explicit residual calculation is identical to that of single-block scheme, and therefore converged solutions for both schemes must be the same. To accelerate convergence, synchronous and asynchronous multigrid strategies are implemented. Significant speedups have been achieved in a multiple processor environment, while convergence rates similar to those of the single-block scheme are observed.

Tysinger, T. L.↗

NASA NTRS1953

Free-flight Performance of a Rocket-boosted, Air-launched 16-inch-diameter Ram-jet Engine at Mach Numbers up to 2.20

The investigation of air-launched ram-jet engines has been extended to include a study of models with a nominal design free-stream Mach number of 2.40. These models require auxiliary thrust in order to attain a flight speed at which the ram jet becomes self-accelerating. A rocket-boosting technique for providing this auxiliary thrust is described and time histories of two rocket-boosted ram-jet flights are presented. In one flight, the model attained a maximum Mach number of 2.20 before a fuel system failure resulted in the destruction of the engine. Performance data for this model are presented in terms of thrust and drag coefficients, diffuser pressure recovery, mass-flow ratio, combustion efficiency, specific fuel consumption, and over-all engine efficiency.

AIR INLETS - NOSE, ANNULAR↗

NASA NTRS1960

Theoretical Calculations of the Pressures, Forces, and Moments Due to Various Lateral Motions Acting on Tapered Sweptback Vertical Tails with Supersonic Leading and Trailing Edges

Based on expressions for the linearized velocity potentials and pressure distributions given in NACA Technical Report 1268, formulas for the span load distribution, forces, and moments are derived for families of thin isolated vertical tails with arbitrary aspect ratio, taper ratio, and sweepback performing the motions constant sideslip, steady rolling, steady yawing, and constant lateral acceleration. The range of Mach number considered corresponds, in general, to the condition that the tail leading and trailing edges are supersonic. To supplement the analytical results, design-type charts are presented which enable rapid estimation of the forces and moments (expressed as stability derivatives) for given combinations of geometry parameters and Mach number.

Margolis, Kenneth↗

NASA NTRS2004

Initial characterization of the microgravity environment of the international space station: increments 2 through 4

The primary objective of the International Space Station (ISS) is to provide a long-term quiescent environment for the conduct of scientific research for a variety of microgravity science disciplines. This paper reports to the microgravity scientific community the results of an initial characterization of the microgravity environment on the International Space Station for increments 2 through 4. During that period almost 70,000 hours of station operations and scientific experiments were conducted. 720 hours of crew research time were logged aboard the orbiting laboratory and over half a terabyte of acceleration data were recorded and much of that was analyzed. The results discussed in this paper cover both the quasi-steady and vibratory acceleration environment of the station during its first year of scientific operation. For the quasi-steady environment, results are presented and discussed for the following: the space station attitudes Torque Equilibrium Attitude and the X-Axis Perpendicular to the Orbital Plane; station docking attitude maneuvers; Space Shuttle joint operation with the station; cabin de-pressurizations and the station water dumps. For the vibratory environment, results are presented for the following: crew exercise, docking events, and the activation/de-activation of both station life support system hardware and experiment hardware. Finally, a grand summary of all the data collected aboard the station during the 1-year period is presented showing where the overall quasi-steady and vibratory acceleration magnitude levels fall over that period of time using a 95th percentile benchmark. Published by Elsevier Ltd.

Flight Experiment↗

NASA NTRS2006

In-Vacuum Photogrammetry of a Ten-Meter Square Solar Sail

Solar sailing is a promising, future in-space propulsion method that uses the small force of reflecting sunlight to accelerate a large, reflective membrane without expendable propellants. One of two solar sail configurations under development by NASA is a striped net approach by L'Garde, Inc. This design uses four inflatably deployed, lightweight booms supporting a network of thin strings onto which four quadrants of ultrathin aluminized membranes are attached. The NASA Langley Research Center (LaRC) provided both experimental and analytical support to L'Garde for validating the structural characteristics of this unique, ultralightweight spacecraft concept. One of LaRC's responsibilities was to develop and apply photogrammetric methods to measure sail shape. The deployed shape provides important information for validating the accuracy of finite-element modeling techniques. Photogrammetry is the science and art of calculating 3D coordinates of targets or other distinguishing features on structures using images. A minimum of two camera views of each target is required for 3D determination, but having four or more camera views is preferable for improved reliability and accuracy. Using retroreflective circular targets typically provides the highest measurement accuracy and automation. References 3 and 4 provide details of photogrammetry technology, and reference 5 discusses previous experiences with photogrammetry for measuring gossamer spacecraft structures such as solar sails. This paper discusses the experimental techniques used to measure a L Garde 10-m solar sail test in vacuum with photogrammetry. The test was conducted at the NASA-Glenn Space Power Facility (SPF) located at Plum Brook Station in Sandusky, Ohio. The SPF is the largest vacuum chamber in the United States, measuring 30 m in diameter by 37 m in height. High vacuum levels (10(exp -6) torr) can be maintained inside the chamber, and cold environments (-195 C) are possible using variable-geometry cryogenic cold walls. This test used a vacuum level of approximately 1 torr (sufficient for structural static/dynamic characterization) and instead of using the cryogenic cold walls, used local LN2 cold plates underneath each of the four cold-rigidizable solar sail booms instead.

Pappa, Richard S.↗

NASA NTRS2007

Simple, Compact, Safe Impact Tester

An apparatus has been designed and built for testing the effects, on moderate-sized objects, of cushioned decelerations having magnitudes ranging up to several hundred g [where g = normal Earth gravitational acceleration (approximately 9.8 m/s(exp 2))].

Roach, Pat R.↗

NASA NTRS2010

Computation of Earth Science Products on Spaceborne Platforms

Spaceborne sensors like NASA's Hyperion hyperspectral imager generate huge data volumes, and several near-term trends indicate that data volumes will only increase. Next-generation hyperspectral missions, such as NASA's Hyperspectral Infrared Imager (HyspIRI), will operate at higher duty cycles and higher data rates, and their users will expect products to be generated from the data in near real time [1]. Barring a sudden advance in satellite downlink capacity, these trends point to a need to process data and generate products onboard the spacecraft. Rather than downlink an entire hyperspectral image cube, onboard processing enables satellites to downlink partial or completed scientific data products, which are often one to two orders of magnitude smaller than the original image. In addition, a satellite with onboard data processing resources and direct broadcast transmission equipment could send data products directly to first responders, research scientists or other users on the ground. Next-generation space-capable data processors will have a combination of reconfigurable gate arrays, digital signal processors and general-purpose CPUs. Correctly programmed and configured, these resources are sufficient to run sophisticated data analysis programs, including hyperspectral image processing algorithms that commonly run on desktop computers [2]. This paper describes how we implemented one such program, the HSEG hierarchical image segmentation algorithm, software commonly used on desktop and parallel processors, on a hardware platform designed to mimic a next-generation space-capable data processor [3]. We also describe our approach to porting the algorithm to and optimizing it for the new platform, and determine the expected performance gains enabled by our design. This extended abstract will describe the HSEG algorithm and hardware platform in greater detail, provide an analysis of the key function within the algorithm that required hardware acceleration, and describe our implementation of that function in hardware.

Fisher, Kevin↗

NASA NTRS2017

Drag-Free Performance of the ST7 Disturbance Reduction System Flight Experiment on the LISA Pathfinder

The Space Technology-7 Disturbance Reduction System (DRS) is an experiment package aboard the European Space Agency (ESA) LISA Pathfinder spacecraft. LISA Pathfinder launched from Kourou, French Guiana on December 3, 2015. The DRS is tasked to validate two specific technologies: colloidal micro-Newton thrusters (CMNT) to provide low-noise control capability of the spacecraft, and drag-free control flight. This validation is performed using highly sensitive drag-free sensors, which are provided by the LISA Technology Package of the European Space Agency. The Disturbance Reduction System is required to maintain the spacecrafts position with respect to a free-floating test mass to better than 10nmHz, along its sensitive axis (axis in optical metrology). It also has a goal of limiting the residual accelerations of any of the two test masses to below 30 (1 + [f3 mHz]) fmsHz, over the frequency range of 1 to 30 mHz.This paper briefly describes the design and the expected on-orbit performance of the control system for the two modes wherein the drag-free performance requirements are verified. The on-orbit performance of these modes are then compared to the requirements, as well as to the expected performance, and discussed.

Attitude Control↗

NASA NTRS2018

Influence of Core and Hexapod Geometry, and Local Reinforcement on the Performance of Ultra-Lightweight ULE Mirror

The Habitable Exoplanet Observatory (HabEx) mission has unique optical performance requirements which drive the mirror design process beyond the traditional criteria. While mass and stiffness are still important, the response to inertia loading (expressed in terms of Zernike coefficients) to omni-directional excitation dominates the effort. While a Zerodur mirror is the current baseline, as mass budgets change, a ULE design is being studied as a potential alternative. This trade study looked at over 264 design variations using the Arnold Mirror Modeler and ANSYS(c) to investigate the influence of various design elements, including: substrate thickness, core cell size, hexapod geometry and local reinforcement. Design 'goodness' was evaluated based on the mirror's inertial deformation response to omni-directional input. This response was calculated via RSSing Zernike polynomial responses to (XYZ) accelerations.

Space Telescope Technology↗

NASA NTRSDate not supplied

High-fidelity Modeling and Visualizing of Solar Radiation Pressure A Framework for High-fidelity Analysis

Solar Radiation Pressure (SRP) is the force produced by the impact of sunlight photons on the surface of the spacecraft. This extra force, despite being small,plays an important role on trajectory design and orbit determination. In this pa-per we present an open-source tool that enables the user to compute high-fidelity approximations of SRP accelerations for a given spacecraft using ray-tracing techniques. The tool also allows the user to compare between different fidelity levels and different models like the N-plate or the cannonball finding a trade-off on the SRP accuracy between computation time and accuracy.

Leandro Zardain↗

NASA NTRS1994

Hypersonic vehicle model and control law development using H(infinity) and micron synthesis

The control system design for a Single Stage To Orbit (SSTO) air breathing vehicle will be central to a successful mission because a precise ascent trajectory will preserve narrow payload margins. The air breathing propulsion system requires the vehicle to fly roughly halfway around the Earth through atmospheric turbulence. The turbulence, the high sensitivity of the propulsion system to inlet flow conditions, the relatively large uncertainty of the parameters characterizing the vehicle, and continuous acceleration make the problem especially challenging. Adequate stability margins must be provided without sacrificing payload mass since payload margins are critical. Therefore, a multivariable control theory capable of explicitly including both uncertainty and performance is needed. The H(infinity) controller in general provides good robustness but can result in conservative solutions for practical problems involving structured uncertainty. Structured singular value mu framework for analysis and synthesis is potentially much less conservative and hence more appropriate for problems with tight margins. An SSTO control system requires: highly accurate tracking of velocity and altitude commands while limiting angle-of-attack oscillations, minimized control power usage, and a stabilized vehicle when atmospheric turbulence and system uncertainty are present. The controller designs using H(infinity) and mu-synthesis procedures were compared. An integrated flight/propulsion dynamic mathematical model of a conical accelerator vehicle was linearized as the vehicle accelerated through Mach 8. Vehicle acceleration through the selected flight condition gives rise to parametric variation that was modeled as a structured uncertainty. The mu-analysis approach was used in the frequency domain to conduct controller analysis and was confirmed by time history plots. Results demonstrate the inherent advantages of the mu framework for this class of problems.

Gregory, Irene M.↗

NASA NTRS2003

Long-Term Reliability of High Speed SiGe/Si Heterojunction Bipolar Transistors

Accelerated lifetime tests were performed on double-mesa structure Si/Si0.7Ge0.3/Si npn heterojunction bipolar transistors, grown by molecular beam epitaxy, in the temperature range of 175C-275C. Both single- and multiple finger transistors were tested. The single-finger transistors (with 5x20 micron sq m emitter area) have DC current gains approximately 40-50 and f(sub T) and f(sub MAX) of up to 22 GHz and 25 GHz, respectively. The multiple finger transistors (1.4 micron finger width, 9 emitter fingers with total emitter area of 403 micron sq m) have similar DC current gain but f(sub T) of 50 GHz. It is found that a gradual degradation in these devices is caused by the recombination enhanced impurity diffusion (REID) of boron atoms from the p-type base region and the associated formation of parasitic energy barriers to electron transport from the emitter to collector layers. This REID has been quantitatively modeled and explained, to the first order of approximation, and the agreement with the measured data is good. The mean time to failure (MTTF) of the devices at room temperature is estimated from the extrapolation of the Arrhenius plots of device lifetime versus reciprocal temperature. The results of the reliability tests offer valuable feedback for SiGe heterostructure design in order to improve the long-term reliability of the devices and circuits made with them. Hot electron induced degradation of the base-emitter junction was also observed during the accelerated lifetime testing. In order to improve the HBT reliability endangered by the hot electrons, deuterium sintered techniques have been proposed. The preliminary results from this study show that a deuterium-sintered HBT is, indeed, more resistant to hot-electron induced base-emitter junction degradation. SiGe/Si based amplifier circuits were also subjected to lifetime testing and we extrapolate MTTF is approximately 1.1_10(exp 6) hours at 125iC junction temperature from the circuit lifetime data.

Ponchak, George E.↗

NASA NTRS2014

Validation of the 5th and 95th Percentile Hybrid III Anthropomorphic Test Device Finite Element Model

NASA spacecraft design requirements for occupant protection are a combination of the Brinkley criteria and injury metrics extracted from anthropomorphic test devices (ATD's). For the ATD injury metrics, the requirements specify the use of the 5th percentile female Hybrid III and the 95th percentile male Hybrid III. Furthermore, each of these ATD's is required to be fitted with an articulating pelvis and a straight spine. The articulating pelvis is necessary for the ATD to fit into spacecraft seats, while the straight spine is required as injury metrics for vertical accelerations are better defined for this configuration. The requirements require that physical testing be performed with both ATD's to demonstrate compliance. Before compliance testing can be conducted, extensive modeling and simulation are required to determine appropriate test conditions, simulate conditions not feasible for testing, and assess design features to better ensure compliance testing is successful. While finite element (FE) models are currently available for many of the physical ATD's, currently there are no complete models for either the 5th percentile female or the 95th percentile male Hybrid III with a straight spine and articulating pelvis. The purpose of this work is to assess the accuracy of the existing Livermore Software Technology Corporation's FE models of the 5th and 95th percentile ATD's. To perform this assessment, a series of tests will be performed at Wright Patterson Air Force Research Lab using their horizontal impact accelerator sled test facility. The ATD's will be placed in the Orion seat with a modified-advanced-crew-escape-system (MACES) pressure suit and helmet, and driven with loadings similar to what is expected for the actual Orion vehicle during landing, launch abort, and chute deployment. Test data will be compared to analytical predictions and modelling uncertainty factors will be determined for each injury metric. Additionally, the test data will be used to further improve the FE model, particularly in the areas of the ATD neck components, harness, and suit and helmet effects.

Lawrence, C.↗

NASA NTRS1980

A solar encounter mission - Starprobe

Accurate measurements of the internal mass distribution and dynamics of the sun as well as in situ observations of its environs are proposed through a JPL-designed satellite, STARPROBE. Scheduled for launch in 1988 under NASA's five-year plan, the probe will conduct radiometric experiments to determine the solar quadrupole moment (J2), fields-and-particles experiments (evaluating such phenomena as heating, acceleration, and peak random velocity of solar wind), and optical experiments potentially superior to those of the Earth-orbiting Solar Optical Telescope (SOT). With flight times ranging from 2.7 to 5.9 years, present delivery options comprise planetary gravity-assist trajectories that will give the spacecraft a perihelion of four solar radii at a 90 deg-inclination. Owing to science- and mission requirements, the thermal shield of the craft should tolerate a solar flux 3000 times greater than that at earth, radioisotope thermoelectric generators supplying 700 watts of power, and a three-axis stabilization system with reaction wheels providing control torque. Implementation concepts now under study may change some of the details of the design.

Randolph, J. E.↗

NASA NTRS1979

A program for calculating load coefficient matrices utilizing the force summation method, L218 (LOADS). Volume 1: Engineering and usage

The LOADS program L218, a digital computer program that calculates dynamic load coefficient matrices utilizing the force summation method, is described. The load equations are derived for a flight vehicle in straight and level flight and excited by gusts and/or control motions. In addition, sensor equations are calculated for use with an active control system. The load coefficient matrices are calculated for the following types of loads: translational and rotational accelerations, velocities, and displacements; panel aerodynamic forces; net panel forces; shears and moments. Program usage and a brief description of the analysis used are presented. A description of the design and structure of the program to aid those who will maintain and/or modify the program in the future is included.

Miller, R. D.↗

NASA NTRS1986

High-Flux Atomic-Oxygen Source

Beams of pure ground-state oxygen atoms produced. Accelerated electrons strike beam of O2 gas in dissociative-attachment region, producing O- ions. O- ions accelerated to desired final energy and pass through photodetachment region to form 0(3P) atoms. These pass between electric field plates to remove O- and e and strike target. Designed specifically to study degradation of materials and spacecraft glow phenomena in low Earth orbits, used to study gas-phase collision phenomena involving energetic oxygen atoms.

Chutjian, A.↗

NASA NTRS1986

Life cycle cost assessment of future low heat rejection engines

The Adiabatic Diesel Engine Component Development (ADECD) represents a project which has the objective to accelerate the development of highway truck engines with advanced technology aimed at reduced fuel consumption. The project comprises three steps, including the synthesis of a number of engine candidate designs, the coupling of each with a number of systems for utilizing exhaust gas energy, and the evaluation of each combination in terms of desirability. Particular attention is given to the employed evaluation method and the development of this method. The objective of Life Cycle Cost (LCC) evaluation in the ADECD program was to select the best from among 42 different low heat rejection engine (LHRE)/exhaust energy recovery system configurations. The LCC model is discussed along with a maintenance cost model, the evaluation strategy, the selection of parameter ranges, and a full factorial analysis.

Petersen, D. R.↗