Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADVECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64

A Fluid Pulse on the Hikurangi Subduction Margin: Evidence From a Heat Flux Transect Across the Upper Limit of Gas Hydrate Stability: Fluid Pulse on the Hikurangi Margin

A transect of seafloor heat probe measurements on the Hikurangi Margin shows a significant increase of thermal gradients upslope of the updip limit of gas hydrate stability at the seafloor. We interpret these anomalously high thermal gradients as evidence for a fluid pulse leading to advective heat flux, while endothermic cooling from gas hydrate dissociation depresses temperatures in the hydrate stability field. Previous studies predict a seamount on the subducting Pacific Plate to cause significant overpressure beneath our study area, which may be the source of the fluid pulse. Double-bottom simulating reflections are present in our study area and likely caused by uplift based on gas hydrate phase boundary considerations, although we cannot exclude a thermogenic origin. We suggest that uplift may be associated with the leading edge of the subducting seamount. Our results provide further evidence for the transient nature of fluid expulsion in subduction zones.

58 GEOSCIENCES↗

The Influence of Episodic Shallow Magma Degassing on Heat and Chemical Transport in Volcanic Hydrothermal Systems

Springs at La Soufrière of Guadeloupe have been monitored for nearly four decades since the phreatic eruption and associated seismic activity in 1976. We conceptualize degassing vapor/gas mixtures as square-wave sources of chloride and heat and apply a new semianalytic solution to demonstrate that chloride and heat pulses with the same timing and duration result in good matches between measured and simulated spring temperatures and concentrations. While the concentration of chloride pulses is variable, the local boiling temperature of 96°C was assigned to all thermal pulses. Because chloride is a conservative tracer, chloride breakthrough is only affected by one-dimensional advection and dispersion. The thermal tracer is damped and lagged relative to chloride due to conductive heat exchange with the overlying and underlying strata. Joint analysis of temperature and chloride allows estimation of the onset and duration of degassing pulses, refining the chronology of recent magmatic intrusion.

58 GEOSCIENCES↗

Tall Tower Vertical Profiles and Diurnal Trends of Ammonia in the Colorado Front Range: Tall Tower Vertical Profiles of Ammonia

Ammonia (NH 3 ) mixing ratios were measured between the surface and 280 m aboveground level from a moveable carriage at the Boulder Atmospheric Observatory tower in summer 2014 as part of the Front Range Air Pollution and Photochemistry Éxperiment. The campaign median mixing ratio was 3.3 ppb, ranging from below detection limits to 192 ppb. Median vertical profiles show an overall increase in NH 3 mixing ratios toward the surface of 6.7 ppb (89%) during the day and 3.9 ppb (141%) at night. In contrast to the overall increasing trend, some individual profiles show decreasing NH 3 in the lowest 10 m. This suggests that the local surface is capable of acting as either a source or a sink, depending on the relative amounts of NH 3 at the surface, and in advected air parcels. We further use this data set to investigate the variation in diurnal patterns of NH 3 as a function of height above the surface. At higher altitudes (100 ± 5 and 280 ± 5 m), NH 3 mixing ratios reach a gradual maximum during the day between 9:00 and 16:00 local time, likely driven by changes in source region. At lower altitudes (10 ± 5 m), the daytime maximum begins earlier at about 7:00 local time, followed by a sharper increase at 9:00 local time. At this height we also observe a peak in NH3 mixing ratios during the night, likely driven by the trapping of emitted NH 3 within the shallower nocturnal boundary layer.

54 ENVIRONMENTAL SCIENCES↗

Investigating the dependence of SCM simulated precipitation and clouds on the spatial scale of large-scale forcing at SGP [Investigating the scale dependence of SCM simulated precipitation and cloud by using gridded forcing data at SGP]

Large-scale forcing data, such as vertical velocity and advective tendencies, are required to drive single-column models (SCMs), cloud-resolving models, and large-eddy simulations. Previous studies suggest that some errors of these model simulations could be attributed to the lack of spatial variability in the specified domain-mean large-scale forcing. This study investigates the spatial variability of the forcing and explores its impact on SCM simulated precipitation and clouds. A gridded large-scale forcing data during the March 2000 Cloud Intensive Operational Period at the Atmospheric Radiation Measurement program's Southern Great Plains site is used for analysis and to drive the single-column version of the Community Atmospheric Model Version 5 (SCAM5). When the gridded forcing data show large spatial variability, such as during a frontal passage, SCAM5 with the domain-mean forcing is not able to capture the convective systems that are partly located in the domain or that only occupy part of the domain. This problem has been largely reduced by using the gridded forcing data, which allows running SCAM5 in each subcolumn and then averaging the results within the domain. This is because the subcolumns have a better chance to capture the timing of the frontal propagation and the small-scale systems. As a result, other potential uses of the gridded forcing data, such as understanding and testing scale-aware parameterizations, are also discussed.

58 GEOSCIENCES↗

Diagnosing Cloud Biases in the GFDL AM3 Model With Atmospheric Classification

In this paper, we define a set of 21 atmospheric states, or recurring weather patterns, for a region surrounding the Atmospheric Radiation Measurement Program's Southern Great Plains site using an iterative clustering technique. The states are defined using dynamic and thermodynamic variables from reanalysis, tested for statistical significance with cloud radar data from the Southern Great Plains site, and are determined every 6 h for 14 years, creating a time series of atmospheric state. The states represent the various stages of the progression of synoptic systems through the region (e.g., warm fronts, warm sectors, cold fronts, cold northerly advection, and high-pressure anticyclones) with a subset of states representing summertime conditions with varying degrees of convective activity. We use the states to classify output from the NOAA/Geophysical Fluid Dynamics Laboratory AM3 model to test the model's simulation of the frequency of occurrence of the states and of the cloud occurrence during each state. The model roughly simulates the frequency of occurrence of the states but exhibits systematic cloud occurrence biases. Comparison of observed and model-simulated International Satellite Cloud Climatology Project histograms of cloud top pressure and optical thickness shows that the model lacks high thin cloud under all conditions, but biases in thick cloud are state-dependent. Frontal conditions in the model do not produce enough thick cloud, while fair-weather conditions produce too much. Finally, we find that increasing the horizontal resolution of the model improves the representation of thick clouds under all conditions but has little effect on high thin clouds. However, increasing resolution also changes the distribution of states, causing an increase in total cloud occurrence bias.

54 ENVIRONMENTAL SCIENCES↗

Drivers of Seasonal Variability in Marine Boundary Layer Aerosol Number Concentration Investigated Using a Steady State Approach

Marine boundary layer (MBL) aerosol particles affect the climate through their interaction with MBL clouds. Although both MBL clouds and aerosol particles have pronounced seasonal cycles, the factors controlling seasonal variability of MBL aerosol particle concentration are not well-constrained. In this paper an aerosol budget is constructed representing the effects of wet deposition, free-tropospheric entrainment, primary surface sources, and advection on the MBL accumulation mode aerosol number concentration (N a ). These terms are further parameterized, and by assuming that on seasonal timescales N a is in steady state, the budget equation is rearranged to form a diagnostic equation for N a based on observable variables. Using data primarily collected in the subtropical northeast Pacific during the MAGIC campaign (Marine ARM (Atmospheric Radiation Measurement) GPCI (GCSS Pacific Cross-section Intercomparison) Investigation of Clouds), estimates of both mean summer and winter N a concentrations are made using the simplified steady-state model and seasonal mean observed variables, and are found to match well with the observed N a . To attribute the modeled difference between summer and winter aerosol concentrations to individual observed variables (e.g. precipitation rate, free-tropospheric aerosol number concentration), a local sensitivity analysis is combined with the seasonal difference in observed variables. This analysis shows that despite wintertime precipitation frequency being lower than summer, the higher winter precipitation rate accounted for approximately 60% of the modeled seasonal difference in N a , which emphasizes the importance of marine stratocumulus precipitation in determining MBL aerosol concentrations on longer time scales.

54 ENVIRONMENTAL SCIENCES↗

Effects of Different Stratospheric SO2 Injection Altitudes on Stratospheric Chemistry and Dynamics

Strategic geoengineering has been proposed to reduce some of the known side effects of stratospheric aerosol modifications. Specific climate goals could be reached depending on design choices of stratospheric sulfur injections by latitude, altitude, and magnitude. Here we explore in detail the stratospheric chemical and dynamical responses to injections at different altitudes using a fully coupled state-of-the-art climate model. Two different sce-narios are explored that produce approximately the same global cooling of 2?C over the period 2042 – 49, a high altitude injection case using 24 Tg SO2 yr-1 at 30 hPa (˜ 25km altitude), and a low altitude injection case using 32 Tg SO2 yr-1 injections at 70 hPa (˜ 20 km altitude), with annual injections divided equally between 15?N and 15?S. Both cases result in a warming of the lower tropical stratosphere up to 10 and 15?C for the high and low altitude injection case and in substantial increase of water vapor of 2 and 4 ppm, respectively, compared to no geoengineering conditions. Polar column ozone in the Northern Hemisphere is reduced by up to 18% in March for the high altitude injection case and up to 8% for the low altitude injection case. However, for winter mid- and high northern latitudes, low altitude injections result in column ozone greater than without geoengineering. These changes are mostly driven by dynamics and advection. Antarctic column ozone in 2040-49 does not recover from present day values for both cases.

Tilmes, S↗

Understanding Mesoscale Aggregation of Shallow Cumulus Convection Using Large-Eddy Simulation

Marine shallow cumulus convection, often mixed with thin stratocumulus, is commonly aggregated into mesoscale patches. The mechanism and conditions supporting this aggregation are elucidated using 36 h large-eddy simulations (LES) on a 128 3 128 km doubly periodic domain, using climatological summertime forcings for a location southeast of Hawaii. Within 12 h, mesoscale patches of higher humidity, more vigorous cumulus convection, and thin detrained cloud at the trade inversion base develop spontaneously. Mesoscale 16 3 16 km subdomains are composited into quartiles of column total water path and their heat and moisture budgets analyzed. The weak temperature gradient approximation is used to explain how apparent heating perturbations drive simulated mesoscale circulations, which in turn induce relative moistening of the moistest subdomains, a form of gross moist instability. Self-aggregation is affected by precipitation and mesoscale feedbacks of radiative and surface fluxes but still occurs without them. In that minimal-physics setting, the humidity budget analysis suggests self-aggregation is more likely if horizontal-mean humidity is a concave function of the horizontal-mean virtual potential temperature, a condition favored by radiative cooling and cold advection within the boundary layer.

54 ENVIRONMENTAL SCIENCES↗

The Sensitivity of Numerical Simulations of Cloud‐Topped Boundary Layers to Cross‐Grid Flow

Abstract In mesoscale and global atmospheric simulations with large horizontal domains, strong horizontal flow across the grid is often unavoidable, but its effects on cloud‐topped boundary layers have received comparatively little study. Here the effects of cross‐grid flow on large‐eddy simulations of stratocumulus and trade‐cumulus marine boundary layers are studied across a range of grid resolutions (horizontal × vertical) between 500 m × 20 m and 35 m × 5 m. Three cases are simulated: DYCOMS nocturnal stratocumulus, BOMEX trade cumulus, and a GCSS stratocumulus‐to‐trade cumulus case. Simulations are performed with a stationary grid (with 4–8 m s −1 horizontal winds blowing through the cyclic domain) and a moving grid (equivalent to subtracting off a fixed vertically uniform horizontal wind) approximately matching the mean boundary‐layer wind speed. For stratocumulus clouds, cross‐grid flow produces two primary effects on stratocumulus clouds: a filtering of fine‐scale resolved turbulent eddies, which reduces stratocumulus cloud‐top entrainment, and a vertical broadening of the stratocumulus‐top inversion which enhances cloud‐top entrainment. With a coarse (20 m) vertical grid, the former effect dominates and leads to strong increases in cloud cover and LWP, especially as horizontal resolution is coarsened. With a finer (5 m) vertical grid, the latter effect is stronger and leads to small reductions in cloud cover and LWP. For the BOMEX trade cumulus case, cross‐grid flow tends to produce fewer and larger clouds with higher LWP, especially for coarser vertical grid spacing. The results presented are robust to choice of scalar advection scheme and Courant number.

54 ENVIRONMENTAL SCIENCES↗

A class of exact solutions for population balances with arbitrary internal coordinates

We develop a novel transformation that maps the linear, nonhomogeneous, multidimensional population balance equation (PBE) into an advection equation that is readily solved using the method of characteristics. The PBEs targeted by this transformation exclude aggregation, breakage, and time dependent birth and death rates. In addition, internal coordinates are assumed to grow independently of each other. The ensuing general formulation is then used to recover closed‐form analytical solutions for problems with monosurface and bulk‐diffusion growth‐rates as well as Gaussian‐type nucleation. For completeness, we derive the multidimensional Green's functions for our approach. This is followed by a brief discussion on how the proposed framework may be used for code verification of moment methods such as the quadrature method of moments and the direct quadrature method of moments. Finally, a sample Mathematica code is provided to derive analytical solutions for the single‐internal‐coordinate case given user‐specified growth, birth, and death rates. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1691–1698, 2015

Saad, Tony↗

Dynamic Coupling at the Ångström Scale

Abstract While momentum transfer from active particles to their immediate surroundings has been studied for both synthetic and biological micron‐scale systems, a similar phenomenon was presumed unlikely to exist at smaller length scales due to the dominance of viscosity in the ultralow Reynolds number regime. Using diffusion NMR spectroscopy, we studied the motion of two passive tracers—tetramethylsilane and benzene—dissolved in an organic solution of active Grubbs catalyst. Significant enhancements in diffusion were observed for both the tracers and the catalyst as a function of reaction rate. A similar behavior was also observed for the enzyme urease in aqueous solution. Surprisingly, momentum transfer at the molecular scale closely resembles that reported for microscale systems and appears to be independent of swimming mechanism. Our work provides new insight into the role of active particles on advection and mixing at the Ångström scale.

Dey, Krishna Kanti↗

Dynamic Coupling at the Ångström Scale

Abstract While momentum transfer from active particles to their immediate surroundings has been studied for both synthetic and biological micron‐scale systems, a similar phenomenon was presumed unlikely to exist at smaller length scales due to the dominance of viscosity in the ultralow Reynolds number regime. Using diffusion NMR spectroscopy, we studied the motion of two passive tracers—tetramethylsilane and benzene—dissolved in an organic solution of active Grubbs catalyst. Significant enhancements in diffusion were observed for both the tracers and the catalyst as a function of reaction rate. A similar behavior was also observed for the enzyme urease in aqueous solution. Surprisingly, momentum transfer at the molecular scale closely resembles that reported for microscale systems and appears to be independent of swimming mechanism. Our work provides new insight into the role of active particles on advection and mixing at the Ångström scale.

Dey, Krishna Kanti↗

A ‘self-adjustment’ mechanism for mixed-layer heat budget in the equatorial Atlantic cold tongue

Wind forcing is one of the most important sources for the oceanic energy cycle and is especially critical to the heat budget of surface mixed layer. The sensitivity of heat budget in the equatorial Atlantic cold tongue (EACT) region (5°S–5°N, 25°W–5°E) to wind forcing and the related mechanism are explored in this study. Based on the experiments forced by different wind forcing from both reanalysis and idealized datasets, it is revealed that the contribution ratio for each of the dominant physical processes in the heat budget is insensitive (the variations within 1% of the mean) to the variations in the local winds (the largest variation is about 20% of the mean) over the EACT region. Therefore, a ‘self-adjustment’ mechanism exists in the mixed-layer heat budget: as local zonal winds over the EACT region strengthen (weaken), both the cooling effects of turbulent mixing and the combined warming effects of surface net heat flux and zonal advection simultaneously increase (decrease) by nearly the same percentage and thus their contribution ratios are kept constant. Finally, owing to the impact of meridional winds on each term of heat budget can be neglected, the above mechanism is also tenable under the situation when the local meridional winds change.

54 ENVIRONMENTAL SCIENCES↗

From h to p efficiently: optimal implementation strategies for explicit time-dependent problems using the spectral/ hp element method: FROM h TO p EFFICIENTLY

We investigate the relative performance of a second-order Adams–Bashforth scheme and second-order and fourth-order Runge–Kutta schemes when time stepping a 2D linear advection problem discretised using a spectral/hp element technique for a range of different mesh sizes and polynomial orders. Numerical experiments explore the effects of short (two wavelengths) and long (32 wavelengths) time integration for sets of uniform and non-uniform meshes. The choice of time-integration scheme and discretisation together fixes a CFL limit that imposes a restriction on the maximum time step, which can be taken to ensure numerical stability. The number of steps, together with the order of the scheme, affects not only the runtime but also the accuracy of the solution. Through numerical experiments, we systematically highlight the relative effects of spatial resolution and choice of time integration on performance and provide general guidelines on how best to achieve the minimal execution time in order to obtain a prescribed solution accuracy. The significant role played by higher polynomial orders in reducing CPU time while preserving accuracy becomes more evident, especially for uniform meshes, compared with what has been typically considered when studying this type of problem.

42 ENGINEERING↗

Incompressible multiphase flow and encapsulation simulations using the moment-of-fluid method

A moment-of-fluid method is presented for computing solutions to incompressible multiphase flows in which the number of materials can be greater than two. In this work, the multimaterial moment-of-fluid interface representation technique is applied to simulating surface tension effects at points where three materials meet. The advection terms are solved using a directionally split cell integrated semi-Lagrangian algorithm, and the projection method is used to evaluate the pressure gradient force term. The underlying computational grid is a dynamic block-structured adaptive grid. The new method is applied to multiphase problems illustrating contact-line dynamics, triple junctions, and encapsulation in order to demonstrate its capabilities. Examples are given in two-dimensional, three-dimensional axisymmetric (R–Z), and three-dimensional (X–Y–Z) coordinate systems.

97 MATHEMATICS AND COMPUTING↗

A dynamic variational multiscale method on unstructured meshes for stationary transport problems

Here, this paper presents a variational multiscale (VMS) based finite element method where the stabilization parameter is computed dynamically. The current dynamic procedure takes in a general structure/form of the stabilization parameter with unknown coefficients and computes them dynamically in a local fashion resulting in a dynamic VMS-based finite element method. Thus, a static stabilization parameter with pre-defined coefficients is not needed. A variational Germano identity (VGI) based local procedure suitable for unstructured meshes is developed to perform the dynamic computation in a local fashion. The local VGI based procedure is applied for each interior vertex in the mesh and unknown coefficients are first determined locally at each vertex, and subsequently, for each element a maximum value is taken over the vertices of the element. To make the current procedure practical, a coarser secondary solution is constructed from the primary coarse-scale solution, which is done locally over a patch of elements around each interior vertex. Further, averaging steps are employed to make the local dynamic procedure robust. Currently, the new dynamic VMS formulation is applied to steady problems governed by the advection-diffusion and incompressible Navier-Stokes equations in both 1D and 2D to demonstrate its efficacy and effectiveness.

97 MATHEMATICS AND COMPUTING↗

Anthropogenic influences on groundwater in the vicinity of a long-lived radioactive waste repository: Anthropogenic influences on groundwater

The groundwater flow system in the Culebra Dolomite Member (Culebra) of the Permian Rustler Formation is a potential radionuclide release pathway from the Waste Isolation Pilot Plant (WIPP), the only deep geological repository for transuranic waste in the United States. We did not expect that early conceptual models of the Culebra, groundwater levels would fluctuate markedly, except in response to long-term climatic changes, with response times on the order of hundreds to thousands of years. Recent groundwater pressures measured in monitoring wells record more than 25 m of drawdown. The fluctuations are attributed to pumping activities at a privately-owned well that may be associated with the demand of the Permian Basin hydrocarbon industry for water. Furthermore, the unprecedented magnitude of drawdown provides an opportunity to quantitatively assess the influence of unplanned anthropogenic forcings near the WIPP. Spatially variable realizations of Culebra saturated hydraulic conductivity and storativity were used to develop groundwater flow models to estimate a pumping rate for the private well and investigate its effect on advective transport. Simulated drawdown shows reasonable agreement with observations (average Model Efficiency coefficient = 0.7). Steepened hydraulic gradients associated with the pumping reduce estimates of conservative particle travel times across the domain by one-half and shift the intersection of the average particle track with the compliance boundary by more than two kilometers. Finally, the value of the transient simulations conducted for this study lie in their ability to (i) improve understanding of the Culebra groundwater flow system and (ii) challenge the notion of time-invariant land use in the vicinity of the WIPP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Conservative solute transport processes and associated transient storage mechanisms: Comparing streams with contrasting channel morphologies, land use and land cover

Abstract Land use within a watershed impacts stream channel morphology and hydrology and, therefore, in‐stream solute transport processes and associated transient storage mechanisms. This study evaluated transport processes in two contrasting stream sites where channel morphology was influenced by the surrounding land use, land cover, climate and geologic controls: Como Creek, CO, a relatively undisturbed, high gradient, forested stream with a gravel bed and complex channel morphology, and Clear Creek, IA, an incised, low‐gradient stream with low‐permeability substrate draining an agricultural landscape. We performed conservative stream tracer injections at these sites to address the following questions: (1) How does solute transport vary between streams with differing morphologies? and (2) How does solute transport at each stream site change as a function of discharge? We analysed in‐stream tracer time series data and compared results quantifying solute attenuation in surface and subsurface transient storage zones. Significant trends were observed in these metrics with varying discharge conditions at the forested site but not at the agricultural site. There was a broad range of transport mechanisms and evidence of substantial exchange with both surface and hyporheic transient storage in the relatively undisturbed, forested stream. Changing discharge conditions activated or deactivated different solute transport mechanisms in the forested site and greatly impacted advective travel time. Conversely in the simplified agricultural stream, there was a narrow range of solute transport behaviour across flows and predominantly surface transient storage at all measured discharge conditions. These results demonstrate how channel simplification inhibits available solute transport mechanisms across varying discharge conditions.

54 ENVIRONMENTAL SCIENCES↗