Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Crystal structure, spectroscopy and thermodynamic properties of M{sup I}VWO{sub 6}(M{sup I} - Li, Na)

In the present work lithium (sodium) vanadium tungsten oxides with brannerite structure is refined by the Rietveld method (space group C2/m, Z=2). IR and Raman spectroscopy was used to assign vibrational bands and determine structural particularities. The diffuse reflectance spectra allow to calculate bandgap for M{sup I}VWO{sub 6}(M{sup I} - Li, Na). The temperature dependences of heat capacity have been measured first in the range from 7 to 350 K for these compounds and then between 330 and 640 K, respectively, by precision adiabatic vacuum and dynamic calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C{sub p}{sup o}(T), enthalpy H{sup o}(T)-H{sup o}(0), entropy S{sup o}(T)-S{sup o}(0) and Gibbs function G{sup o}(T)-H{sup o}(0), for the range from T->0 to 640 K. The differential scanning calorimetry was applied to measure decomposition temperature of compounds under study. - Graphical abstract: Fragment of the structure of Li(Na)VWO{sub 6}.

36 MATERIALS SCIENCE↗

Evidence for transition from polaron to bipolaron conduction in electroactive Li{sub x}Cr{sub 0.11}V{sub 2}O{sub 5.16} powders: A dynamic study from 10 to 10{sup 10} Hz

This paper presents a study on the electrical transport properties of lithiated Cr{sub 0.11}V{sub 2}O{sub 5.16}, which can be used as a rechargeable cathodic material in lithium batteries. Dielectric and conductivity spectra of Li{sub x}Cr{sub 0.11}V{sub 2}O{sub 5.16} powders (x=0, 0.05, 0.40 and 1.20) were recorded in a broad frequency range of 10-10{sup 10} Hz at temperature varying between 300 and 400 K. Complex resistivity diagrams have enabled to obtain thermal behaviors of bulk dc-conductivity. Dielectric relaxations were found, attributed to small polarons and (intersite) bipolarons hopping. The transport properties are shown to be consistent with small polaron and bipolaron conduction models. The change from polaronic to bipolaronic conduction has been evidenced with the increase of the lithium content x from 0.40 to 1.20. This work opens up new prospects for a more fundamental understanding of the electronic transport in relation with the electrochemical properties of Cr{sub 0.11}V{sub 2}O{sub 5.16}. - Graphical Abstract: Schematic structure of Cr{sub 0.11}V{sub 2}O{sub 5.16}. Highlights: Black-Right-Pointing-Pointer Chromium-vanadium mixed oxide as cathodic material. Black-Right-Pointing-Pointer Broadband dielectric spectroscopy from low frequencies to microwaves. Black-Right-Pointing-Pointer Transition from polaron to bipolaron conduction as lithium content increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The structure of dodecagonal (Ta,V){sub 1.6}Te imaged by phase-contrast scanning transmission electron microscopy

While HRTEM is the well-established method to characterize the structure of dodecagonal tantalum (vanadium) telluride quasicrystals and their periodic approximants, phase-contrast imaging performed on an aberration-corrected scanning transmission electron microscope (STEM) represents a favorable alternative. The (Ta,V){sub 151}Te{sub 74} clusters, the basic structural unit in all these phases, can be visualized with high resolution. A dependence of the image contrast on defocus and specimen thickness has been observed. In thin areas, the projected crystal potential is basically imaged with either dark or bright contrast at two defocus values close to Scherzer defocus as confirmed by image simulations utilizing the principle of reciprocity. Models for square-triangle tilings describing the arrangement of the basic clusters can be derived from such images. - Graphical abstract: PC-STEM image of a (Ta,V){sub 151}Te{sub 74} cluster. Highlights: Black-Right-Pointing-Pointer C{sub s}-corrected STEM is applied for the characterization of dodecagonal quasicrystals. Black-Right-Pointing-Pointer The projected potential of the structure is mirrored in the images. Black-Right-Pointing-Pointer Phase-contrast STEM imaging depends on defocus and thickness. Black-Right-Pointing-Pointer For simulations of phase-contrast STEM images, the reciprocity theorem is applicable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ammonia sensing properties of V-doped ZnO:Ca nanopowders prepared by sol–gel synthesis

V-doped ZnO:Ca nanopowders with different V loading were prepared by sol–gel synthesis and successive drying in ethanol under supercritical conditions. Characterization data of nanopowders annealed at 700 °C in air, revealed that they have the wurtzite structure. Raman features of V-doped ZnO:Ca samples were found to be substantially modified with respect to pure ZnO or binary ZnO:Ca samples, which indicate the substitution of vanadium ions in the ZnO lattice. The ammonia sensing properties of V-doped ZnO:Ca thick films were also investigated. The results obtained demonstrate the possibility of a fine tuning of the sensing characteristics of ZnO-based sensors by Ca and V doping. In particular, their combined effect has brought to an enhanced response towards NH{sub 3} compared to bare ZnO and binary V-ZnO and Ca-ZnO samples. Raman investigation suggested that the presence of Ca play a key role in enhancing the sensor response in these ternary composite nanomaterials. - Graphical abstract: V-doped ZnO:Ca nanopowders prepared by sol–gel synthesis possess enhanced sensing characteristics towards NH{sub 3} compared to bare ZnO. - Highlights: • V-doped ZnO:Ca nanopowders with different V loading were prepared by sol–gel synthesis. • Raman features of V-doped ZnO:Ca samples indicate the substitution of V ions in the ZnO lattice. • Combined effects of dopants have brought to an enhanced response to NH{sub 3} compared to ZnO. • Ca play a key role in enhancing the sensor response of ternary V-doped ZnO:Ca composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical and chemical characterization of Dead Sea mud

A laboratory analysis was performed to determine the physical and chemical properties of 24 Dead Sea mud samples collected from three different locations on the eastern shore of the Dead Sea. Several analytical techniques were used to determine the chemical and mineralogical compositions of those samples including atomic absorption spectrometry and X-ray diffraction. Physical parameters such as specific gravity, Atterberg limits, grain size, specific surface area, cation exchange capacity, pH and electrical conductivity were also studied. The main focus of the work was to document mud characteristics and to study the interrelation between physical and chemical properties. The mud samples were quite rich in minerals. Strontium was the most abundant trace element in the samples (range: 410-810 ppm) followed by barium (range: 155-380 ppm), vanadium (range: 209-264 ppm) and lead (range: 108-114 ppm). There were significant differences in the elemental contents of mud samples collected from different locations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TEM characterization of Au-based alloys to join YSZ to steel for SOFC applications

The microstructures of two gold-based alloys with compositions (in wt.%) of 96.4Au-3Ni-0.6Ti and 97.5Au-0.75Ni-1.75V following oxidation at 850 Degree-Sign C for 200 min were characterized by analytical transmission electron microscopy with energy dispersive spectroscopy and by scanning electron microscopy. In the oxidized 96.4Au-3Ni-0.6Ti interlayer, a dense scale composed of nickel oxide (NiO) and nickel titanate (NiTiO{sub 3}) formed at the alloy surface. No evidence of titanium oxide was found because there was not enough Ti present to form titanium oxide. In the oxidized 97.5Au-0.75Ni-1.75V interlayer, loose vanadium oxide (V{sub 2}O{sub 5}) and nickel vanadate (Ni{sub 2}V{sub 2}O{sub 7}) formed and were distributed within the oxidized 97.5Au-0.75Ni-1.75V interlayer. Similarly, because of the low Ni content in the alloys, no NiO formed. The oxide products in the 96.4Au-3Ni-0.6Ti and 97.5Au-0.75Ni-1.75V interlayers after oxidation are consistent with the Pilling-Bedworth (PB) ratio considerations. - Highlights: Black-Right-Pointing-Pointer Two commercial Au-based reactive metallic interlayers were oxidized at 850 Degree-Sign C for 200 min. Black-Right-Pointing-Pointer The oxidized products at the surface were characterized by TEM/EDS and SEM. Black-Right-Pointing-Pointer NiO and NiTiO{sub 3} formed at the oxidized 96.4Au-3Ni-0.6Ti interlayer. Black-Right-Pointing-Pointer V{sub 2}O{sub 5} and Ni{sub 2}V{sub 2}O{sub 7} were found in the oxidized 97.5Au-0.75Ni-1.75V interlayer. Black-Right-Pointing-Pointer These oxide products are consistent with the Pilling-Bedworth (PB) ratio considerations.

36 MATERIALS SCIENCE↗

One step synthesis of monoclinic VO{sub 2} (B) bundles of nanorods: Cathode for Li ion battery

One of the metastable phases of vanadium dioxide, VO{sub 2}(B) bundles of nanorods and microspheres have been synthesized through a simple hydrothermal method by dispersing V{sub 2}O{sub 5} in aqueous quinol. The obtained products were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and electrochemical discharge-charge test for lithium battery. It was found that the morphologies of the obtained VO{sub 2}(B) can be tuned by manipulating the relative amount of quinol. The electrochemical test found that the bundles of nanorods exhibit an initial discharge capacity of 171 mAh g{sup -1} and its almost stabilized capacity was reached to 108 mAh g{sup -1} after 47 cycles at a current density of 0.1 mA g{sup -1}. The formation mechanism of the VO{sub 2}(B) bundles of nanorods and microspheres was also discussed. - Highlights: Black-Right-Pointing-Pointer VO{sub 2}(B) bundles of nanorods and microspheres were prepared by hydrothermal route at 180 Degree-Sign C for 1 day. Black-Right-Pointing-Pointer In this method for the synthesis of VO{sub 2}(B), we are the first to use quinol as a reducing agent. Black-Right-Pointing-Pointer Morphologies of the obtained VO{sub 2}(B) can be tuned by manipulating the relative amount of quinol. Black-Right-Pointing-Pointer VO{sub 2}(B) exhibits an initial capacity of 171 mAh g{sup -1} and reached to 108 mAh g{sup -1} after 47 cycles. Black-Right-Pointing-Pointer The formation mechanism of the VO{sub 2}(B) bundles of nanorods and microspheres is also discussed.

36 MATERIALS SCIENCE↗

Dependence of stress-induced omega transition and mechanical twinning on phase stability in metastable β Ti–V alloys

Tensile properties and deformation microstructures of a series of binary β Ti–16–22V alloys have been investigated. The results show that the plastic deformation mode changes from the plate-like stress-induced ω phase transformation with a special habit plane of (− 5052){sub ω}//(3 − 3 − 2){sub β} to (332)<113> type deformation twinning with increasing the content of vanadium in the β Ti–16–22 wt.% V alloys. The plate-like stress-induced ω phase has a special orientation relationship with the β phase matrix, i.e., [110]{sub β}//[− 12 − 10]{sub ω}, (3 − 3 − 2){sub β}//(− 5052){sub ω} and (− 55 − 4){sub β}//(30 − 31){sub ω}. The alloys plastically deformed by stress-induced ω phase transformation exhibit relatively higher yield strength than those deformed via (332)<113> type deformation twinning. It can be concluded that the stability of β phase plays a significant role in plastic deformation mode, i.e., stress-induced ω phase transformation or (332)<113> type deformation twinning, which governs the mechanical property of the β Ti–16–22 wt.% V alloys. - Highlights: • Tensile properties and deformed microstructures of β Ti–16–22V alloys were studied. • Stress-induced ω phase transformation and (332)<113> twinning occur in the alloys. • Stability of β phase plays a significant role in plastic deformation mode. • Plastic deformation mode governs the mechanical property of the alloys.

36 MATERIALS SCIENCE↗

Formation and evolution of platelet-like Ti-rich precipitates in the V–4Cr–4Ti alloy

The goal of the present investigation is to explain the obviously different appearances of Ti-rich precipitates in vanadium alloy and in steels. To achieve the goal, the formation and evolution of the precipitates in the as-cast and the heat treated V–4Cr–4Ti samples were investigated using optical and electron microscopies. The precipitates were found to be rare in the as-cast samples, and a high density of the precipitates occur in the samples subjected to isothermal holding at 600–1300 °C. The precipitates preferentially distribute within the grains rather than at the grain boundaries. All of the precipitates are platelet-like, with NaCl structure, in three-dimensional space. The further observation using high-resolution electron microscopy (HREM) reveals that a high density of twins occurs in the growth front of the precipitates, whereas the middle of the precipitates is twin-free. Meanwhile, enrichment of titanium atoms was observed in the middle of the precipitates. These results indicate that the precipitates form by a displacive transformation, followed by a diffusional process to enrich titanium further and eliminate the twined structure. - Highlights: • Precipitates in the V–4Cr–4Ti alloy are Ti-(CN) with NaCl structure. • The Ti-rich precipitates are platelet-like in three dimensional space. • Twins occur in both ends of the precipitates and the midst of these is twin-free. • Twinning and its elimination is explained by displacive followed by diffusion.

36 MATERIALS SCIENCE↗

Evolution of microstructures and mechanical properties during solution treatment of a Ti–V–Mo-containing high‑manganese cryogenic steel

Highlights: • High-Mn cryogenic steels are getting the spotlight in the cryogenic market. • The grain size grew slowly and the yield strength remained almost stabilized with an increase of solutionizing temperature. • The Hall–Petch strengthening coefficient for yield strength was small, estimated to be 153 MPa μm{sup 0.5}. • The weakening effect of solutionizing temperature on grain size was attributed to the nano-sized (Ti, V, Mo)C precipitate. - Abstract: The effect of solution treatment on the microstructure and mechanical properties of a high‑manganese (Mn) twin-induced plastic (TWIP) cryogenic steel that was alloyed from elemental titanium (Ti), vanadium (V) and molybdenum (Mo) was investigated by a variety of techniques such as microstructural characterization, room tensile testing and − 196 °C impact testing. The austenite grain size grew slowly with an increase of the solutionizing temperature (ST). The relatively weak effect of the ST on the austenite grain size is attributed to the superior thermal stability and coarsening resistance of the (Ti, V, Mo)C precipitate, which hindered austenite grain growth. An increase in ST improved the low-temperature toughness (LTT) significantly and decreased the strain hardening rate (SHR), but had no significant effect on the yield strength. The Hall–Petch strengthening coefficient for yield strength was small, and was estimated to be 153 MPa μm{sup 0.5}. Undissolved large-sized chromium (Cr) carbide can deteriorate the LTT significantly. Because of its excellent mechanical properties, high-Mn steel that was alloyed by elemental Ti, V and Mo can be used to manufacture storage tanks for liquefied natural gas.

36 MATERIALS SCIENCE↗

Quasi in-situ analysis of geometrically necessary dislocation density in α-fibre and γ-fibre during static recrystallization in cold-rolled low-carbon Ti-V bearing microalloyed steel

Highlights: • Average GND density is higher in gamma fibre than alpha fibre. • Higher drop in average GND density in un-recrystallized portion of gamma fibre • Fine precipitates pin the grain boundary at 700 °C 0 s. • Precipitates are coarse at 800 °C and present inside strain-free grains. - Abstract: In the present study, cold-rolled low-carbon steel is annealed at three different conditions: 700 °C for 0 s, 800 °C for 0 s and 800 °C for 2 min at the heating rate of ~10 °C/s. Recrystallization behaviour on sample surface is studied using a heated stage Scanning Electron Microscopy and Electron Backscattered Diffraction. For the lower annealing temperature of 700 °C with no dwell, almost no recrystallization is observed and microstructure resembles the as-received deformed material with the exception of occasional sub-micron sized nuclei. For the annealing conditions of 800 °C 0 s and 800 °C 2 min, onset and evolution of recrystallization is observed in-situ as a function of the initial as-cold rolled texture. Slower recovery rate of alpha fibre than gamma fibre is observed and confirmed by lower drop in average geometrically necessary dislocation (GND) density for un-recrystallized alpha fibres (1.1E+14 m{sup −2} for 700 °C 0 s, 1.4E+14 m{sup −2} for 800 °C 0 s and 4.5E+14 m{sup −2} for 800 °C 2 min) than for un-recrystallized gamma fibre grains (3.0E+14 m{sup −2} for 700 °C 0 s, 6.2E+14 m{sup −2} for 800 °C 0 s and 9.8E+14 m{sup −2} for 800 °C 2 min) during annealing. Strong gamma texture in recrystallized matrix is found for annealing conditions of 800 °C 0 s and 800 °C 2 min. From TEM characterisation it was shown that sub-grain boundaries are decorated with fine precipitates (diameter d < 15 nm) of titanium‑vanadium carbides (Ti,V)C for the annealing condition of 700 °C 0 s, which suggests that these precipitates play a major overall role in retardation of the recrystallization kinetics.

36 MATERIALS SCIENCE↗

Dielectric and pyroelectric anisotropy in melt-quenched BaBi{sub 2}(Nb{sub 1-x}V{sub x}){sub 2}O{sub 9} ceramics

The (0 0 l) textured BaBi{sub 2}(Nb{sub 1-x}V{sub x}){sub 2}O{sub 9} (where x = 0, 0.03, 0.07, 0.1 and 0.13) ceramics were fabricated via the conventional melt-quenching technique followed by high temperature heat-treatment (800-1000 deg. C range). The influence of vanadium content and sintering temperature on the texture development and relative density were investigated. The samples corresponding to the composition x = 0.1 sintered at 1000 deg. C for 10 h exhibited the maximum orientation of about 67%. The Scanning electron microscopic studies revealed the presence of platy grains having the a-b planes perpendicular the pressing axis. The dielectric constant and the pyroelectric co-efficient values in the direction perpendicular to the pressing axis were higher. The anisotropy in the dielectric constant is about 100 (at 100 kHz) at the dielectric maximum temperature and anisotropy in the pyroelectric co-efficient is about 50 {mu}C cm{sup -2} deg. C{sup -1} in the vicinity of pyroelectric anomaly for the sample corresponding to the composition x = 0.1 sintered at 1000 deg. C. Higher values of the dielectric loss and electrical conductivity were observed in the direction perpendicular to the pressing axis which is attributed to the high oxygen ion conduction in the a-b planes.

36 MATERIALS SCIENCE↗

Route to transition metal carbide nanoparticles through cyanamide and metal oxides

We have designed an efficient route to the synthesis of transition metal carbide nanoparticles starting from an organic reagent cyanamide and transition metal oxides. Four technologically important metal carbide nanoparticles such as tungsten carbide, niobium carbide, tantalum carbide and vanadium carbide were synthesized successfully at moderate temperatures. It is found that cyanamide is an efficient carburization reagent and that the metal oxides are completely transmitted into the corresponding carbide nanoparticles. A possible mechanism is proposed to explain the results of the reaction between cyanamide and the metal oxides.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of nanocrystalline VO{sub 2} from poly(diallyldimethylammonium) chloride and V{sub 2}O{sub 5}

Novel vanadium dioxide nanorods were fabricated from V{sub 2}O{sub 5} in the presence of a reducing agent, the poly(diallyldimethylammonium chloride) (PDDA) via a hydrothermal method at 180 {sup o}C for 48 h. The samples produced were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), infrared spectroscopy (FTIR), nitrogen adsorption (BET) and thermogravimetry (TG/DTG). The nanorods obtained are approximately 50 nm wide and from 300 to 500 nm long and presents high surface area (42 m{sup 2} g{sup -1}). The nanocrystalline B phase VO{sub 2} is not produced by hydrothermal treatment in the absence of the PDDA polyelectrolyte.

36 MATERIALS SCIENCE↗

Reducing ultra-low thermal expansion of {beta}-Zr{sub 2}O(PO{sub 4}){sub 2} by substitutions?

The ultra-low thermal expansion of {beta}-Zr{sub 2}O(PO{sub 4}){sub 2} could still be reduced by chemical modifications, according to previous works on uranium and thorium IV homologues that evidenced a contracting effect of big cations. However, the present study shows that the only isovalent cations likely to substitute for Zr{sup IV} or P{sup V} are either harmful, or unstable, chemically or thermally. Furthermore, aliovalent modifications seem to be forbidden by the crystal structure of the material, leaving probably very few perspectives of improvement. Vanadium however improves significantly the crystallinity of the material and lowers the {alpha}-{beta} transition temperature.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of mesoporous VO{sub 2}·½(H{sub 2}O) nanosheets and study of their electrical properties

Highlights: ► Sheet-like nanocrystalline VO{sub 2}·½(H{sub 2}O) was synthesized by a hydrothermal route. ► Reaction time is key factor for structure and morphology. ► Electrical properties were also studied. ► Conductivity value goes from 75 10{sup −6} Ω{sup −1} cm{sup −1} at 298 K to 68 10{sup −5} Ω{sup −1} cm{sup −1} at 386 K. -- Abstract: Layered sheet-like nanocrystalline VO{sub 2}·½(H{sub 2}O) has been synthesized by hydrothermal process using V{sub 2}O{sub 5} as vanadium source and 2-phenylethylamine as a reducing agent and a structure-directing template. Techniques X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and nitrogen adsorption/desorption isotherms have been used to characterize the structure, morphology and composition of the materials. Electrical conductivity measurements showed that the as synthesized VO{sub 2}·½(H{sub 2}O) nanosheets has a conductivity value which goes from 75 × 10{sup −6} Ω{sup −1} cm{sup −1} at 298 K, to 68 10{sup −5} Ω{sup −1} cm{sup −1} at 386 K with activation energy of 0.24 eV.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of V{sub 4}O{sub 9} flake-like morphology and its photocatalytic application in the degradation of methylene blue

Highlights: ► Flake-like nanocrystalline V{sub 4}O{sub 9} was synthesized by a solvothermal route. ► Photocatalytic activity has been evaluated by the degradation of methylene blue under visible light irradiation. ► V{sub 4}O{sub 9} nanoflakes exhibited much higher photocatalytic activity two times higher than the bulk V{sub 2}O{sub 5}. -- Abstract: Flake-like nanocrystalline V{sub 4}O{sub 9} has been successfully synthesized by solvothermal process using V{sub 2}O{sub 5} as vanadium source and phenolphthalein as a reducing agent and a structure-directing template. Techniques X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and ultraviolet–visible (UV–vis) spectroscopy have been used to characterize the structure, the morphology and the composition of the material. The photocatalytic activity of the material has been evaluated by the degradation of methylene blue under visible light irradiation. As a result, after the lapse of 150 min, around 93.54% bleaching was observed, with V{sub 4}O{sub 9} nanoflakes yielding more photodegradation compared to that of bulk V{sub 2}O{sub 5}. This presents a degradation percentage of about 44.67%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and thermochromic properties of Ce-doped VO{sub 2} films

Graphical abstract: This effect of doping concentration on the phase transition temperature of VO{sub 2} films demonstrates that the phase transition temperature is decreasing along with the increase of the Ce dopant concentrations. After doping Ce, the transition temperature of VO{sub 2} film changes appreciably. Highlights: ► Ce-doped VO{sub 2} films were prepared on muscovite substrate by inorganic sol–gel method for the first time. ► The cerium existing in the VO{sub 2} films in the form of Ce{sup 4+} and Ce{sup 3+} was substituted for part of V atoms in the lattice. ► Ce doping could remarkably reduce the particle size of the Ce-doped films compared with undoped films. ► The phase transition temperature of Ce-doped VO{sub 2} films decreased appreciably with maintaining high-quality phase transition. - Abstract: Mixture of cerium (III) nitrate hexahydrate and vanadium pentaoxide powder were used as precursor to prepare Ce-doped VO{sub 2} films on the muscovite substrate by inorganic sol–gel method. SEM, XRD and XPS were used to investigate the morphologies and structures of VO{sub 2} films. The results show that the VO{sub 2} films grow on the muscovite substrate with preferred orientated (0 1 1) plane and the Ce exists in the form of Ce{sup 4+} and Ce{sup 3+} replacing part of V atoms in the lattice. The infrared transmittance change was measured from room temperature to the temperature above the metal–insulator transition. The films have excellent thermochromic performance. The metal–insulator transition temperature of VO{sub 2} films changes appreciably with Ce doped, which decreases by 4.5 °C per 1 at.% doping. Furthermore, Ce doping could remarkably reduce the particle size of VO{sub 2} films.

36 MATERIALS SCIENCE↗