Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “utility rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A High-Current Pulsed Prototype Power Supply

The Accelerator Controls Operations Research Network (ACORN) project aims to modernize the accelerator control system and replace aging power supplies at Fermilab. As part of this effort, outdated RF ferrite bias power supplies will be redesigned. These power supplies are essential for tuning the resonant frequency of RF cavities by delivering programmable current outputs of up to 2500 A and voltages ranging from −10 V to +35 V. They operate at a repetition rate of 15 Hz in the Booster ring, and 1 Hz at the Main Injector ring. The power supplies utilize a bank of transistors in the linear region, connected in parallel with the load, to actively regulate the output current from a 12-pulse SCR bridge. To support this upgrade, a new bias power supply topology was developed as proof of concept. The design utilizes an IGBT Hbridge operating in Pulse Width Modulation (PWM) mode, controlled by a microcontroller. A prototype, constructed using spare components, successfully delivered an output current of 500 A at a repetition rate of 15 Hz during initial testing. The circuit's bandwidth was measured at 480 Hz, highlighting opportunities for further optimization in the controller design to achieve the target bandwidth of 2 kHz.

Bullman, Austin [ORNL]↗
NASA NTRS1979

The ground processing simulator - A tool for mission model analysis and planning from a launch site perspective

The Ground Processing Simulator (GPS) is a computer-assisted planning tool designed and developed for Space Shuttle launch site application. Utilizing two programming languages, General Purpose Simulation System and FORTRAN, GPS provides the capability to analyze proposed Shuttle mission models via computer simulation. NASA-developed mission models which specify Shuttle launch rates, mission durations, cargo elements, and designated launch site are tested for feasibility by the simulator. GPS produces facility utilization schedules (including the identification of conflicts), launch data options, cargo element requirement dates, ground support equipment inventory requirements, and other data necessary to assess both the programmatic and launch site resources required to support proposed mission models. The purpose of this computer-assisted analysis is to determine methods which will permit the launching of the maximum number of cargoes per year on schedule, and in the sequence desired, with the minimum expenditure of resources.

Ralph, J. A.↗
DOE OSTI2020

Simulation of DWPF Chemical Process Cell Using a Reaction Calorimeter

The Defense Waste Processing Facility (DWPF) converts liquid radioactive waste into glass using a Sludge Receipt Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) in addition to other processes. The SRAT and SME processes can be simulated on a small-scale using the Mettler-Toledo Reaction Calorimeter (RC1). This equipment is able to automate the execution and monitoring of experiments involving nonradioactive chemical simulants. During the chemical processing of sludge in the SRAT process, foam begins to form and can foam over the reaction vessel. The current antifoam used at DWPF creates a risk of increased flammability and has a limited pH range. Usually, mercury is circulated back into the reaction vessel during the SRAT process, making it difficult to remove. To combat foam over, novel antifoams will be tested during the boil-up process using the RC1. To improve mercury extraction, 3D-printed coalescer columns will be tested within the Mercury Water Wash Tank (MWWT) of the RC1. Testing of Simulant Sludge Batch 6 (SB6) was performed to ensure: the sludge would form a stable foam at boiling during full SRAT/SME runs; the antifoam would reduce the amount of foam within the vessel The sludge and a Precipitate Reactor Feed Tank (PRFT) simulant with monosodium titanate (MST) were mixed separately, combined, and then heated to boiling. As shown below, the antifoam used was able to eliminate the foam within the vessel, as expected. The FormLabs Form2 3D Printer can be used to create roughly 3-inch tall and 1-inch diameter columns from clear and ceramic resins. The columns will utilize chemical and physical forces to draw the mercury out of a condensed offgas stream leaving the RC1 reaction vessel. These columns will be tested during full SRAT/SME runs on the basis of how well they are able to collect elemental mercury. In preparation for full-scale runs, the RC1 equipment was assembled onto a custom table and tested with water runs. The software used to control automation, iControl, has a user-friendly interface that allows the experiment to be altered as needed. An example of the data recorded during an experimental run is represented in Figure 1 below. Water runs were utilized as a way to prove if the RC1 system was functioning in the following areas: Boil-up rates, Chemical additions using pumps, Temperature readings, Balance readings, Probe readings, Offgas system, Agitation. Future Plans: Five novel antifoams will be tested during full SRAT/SME runs. The most effective antifoam will be utilized in DWPF's Chemical Process Cell. The design of the Mercury Extraction Coalescer can be further manipulated to increase the extraction of not only elemental mercury, but other heavy metals in environmental remediation processes as well.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRSDate not supplied

Analysis of Cryogenic Propellant Liquefaction Rates in Cooled Constant-Wall-Temperature Tanks

NASA has been focused on developing technology that would allow the production of cryogenic propellants on the Lunar and Martian surfaces. Utilizing Lunar/Martian resources, the produced gaseous propellants must first be liquefied and stored prior to use on the Moon or Mars ascent vehicle. Liquefaction of cryogenic propellants is a necessary technical development to enable NASA’s future spaceflight goals. This paper presents an overview of a proposed model for a propellant liquefaction system, and the effect of tank wall temperatures on cryogenic propellant liquefaction rates. The propellant system was assumed to be a receiver of a gas from an In-Situ Resource Utilization (ISRU) harvester and condensed the gas by cooling the tank walls. First, the heat transfer principles pertinent to condensation are summarized, followed by an overview of the model which performed the analysis, including a summary of the Fortran algorithm implementation. The sensitivity of the condensation rate relative to varying tank wall temperatures is also discussed.

Anson Koch↗
DOE OSTI2022

Verification and Validation Tests of the Gamma Library of the ARC Software Package (Rev.1)

As part of the verification and validation (V&V) efforts of the Argonne Reactor Code (ARC) software system to support the Versatile Test Reactor (VTR) project of the U.S. Department of Energy (DOE), work has been performed to verify and validate the gamma (or photon) library of the multigroup cross section generation code MC 2 -3 of the ARC system, which is the essential part of the coupled neutron and gamma heating calculations to determine the heat generation rate or power distribution in the core. This V&V study was carried out in three steps: 1) review of the procedures and utility programs for generating the MC 2 -3 gamma library, 2) verification tests of cross sections and KERMA factors by comparing the total heat generation rate of coupled neutron and gamma calculation with that obtained with reaction Q values under the assumption of local gamma energy deposition and by comparing the prompt heat generation rate with that calculated with the MCNP6.2 code, and 3) validation tests of cross sections and KERMA factors by analyzing the ZPPR-15D gamma dose data measured with thermoluminescent dosimeters (TLD).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Resource Characterization to Estimate Potential for Electricity Co-Production at Blackburn Oil Field, Nevada

The U.S. Department of Energy estimates that an annual average of 25 billion barrels of hot water are produced from oil and gas wells within the United States. The thermal energy available in the co-produced water stream is usually discarded, as the produced waters are considered an inconvenience by the operators and are disposed of using injection wells. However, utilizing organic Rankine cycle (ORC) generators, a vast amount of thermal energy can be captured and converted into electricity (albeit at relatively low efficiency due to the low temperatures). The National Renewable Energy Laboratory (NREL), in collaboration with Transitional Energy and Grant Canyon Oil & Gas, evaluated the feasibility of geothermal co-production of electricity by utilizing existing oil wells in Blackburn oil field in Nevada. The once prolific Blackburn oil field is located in Pine Valley, approximately 45 miles east-southeast of Elko, Nevada. Currently, the wells targeting the highly fractured Devonian Nevada dolomite reservoir are operating at a water cut ratio of more than 99%, with individual fluid (oil and water) production rates reaching 7.4 L/s (4,021 BBL/day). Analysis of publicly available data showed that the combination of the suitable wells' maximum historical production rates reached 22.90 L/s. The production from these wells occurs naturally and the wells are choked (and even shut down) by the operator to mitigate excessive water production, indicating a strong reservoir recharge and future opportunity to increase the water production for geothermal electricity generation. The main goal of this study was to evaluate the productivity of the existing wells, the performance of the reservoir, the surface network, and the operational constraints in order to achieve 1 MWe of electricity production from the field's water production. Utilizing the GEOPHIRES tool, we have determined that a twofold to threefold increase in the total fluid production, compared to the historical production under artificial restraint (choke), is required to reach a 1-MWe net target output for a low-temperature ORC system with air-cooled condensers. Lower flow rates would be required when utilizing water-based condensers instead of air-cooled condensers. However, that would require a constant supply of cold water, which may be challenging given the arid environment of the project site.

Blackburn↗
DOE OSTI2026

Upcycling Real‐World Post‐Consumer Polyolefins Plastics Into Light Olefins Via Microwave‐Assisted Processing

The rapid accumulation of plastic waste, particularly post-consumer polyolefins (POs) pose severe environmental and economic challenges worldwide. Recycling of post-consumer POs remains inefficient due to difficulties in separating mixed plastics, complex additives compositions, and high processing costs, resulting in recycling rates of less than 9%. To address these critical issues, this study utilized an innovative microwave-assisted catalytic upcycling approach for the efficient upcycling of complex post-consumer POs mixtures into valuable light olefins. Using the microwave-assisted catalytic upcycling approach, gas yields reached up to 80 wt.% from post-consumer POs mixtures, accompanied by a high selectivity (>70 wt.%) toward valuable light olefins. The upcycling of POs under microwave conditions is fully invested, including additives in real-word plastics, mixtures of different POs, reusability of catalyst, and more. The microwave-assisted catalytic upcycling approach offers an efficient, scalable, and cost-effective solution for upcycling post-consumer plastic mixtures, thereby advancing the principles of a circular economy.

42 ENGINEERING↗
DOE OSTI2022

Photovoltaic fleet degradation insights

Abstract In the PV Fleet Performance Data Initiative, high‐frequency data from commercial and utility‐scale photovoltaic (PV) systems have been collected to examine performance loss rates (PLRs) at a fleet scale. To date, performance data from more than 7.2‐gigawatt (GW) capacity, 1700 sites and 19,000 inverters—approximately equivalent to 6% to 7% of the entire US PV market—have been collected. An overall PLR of −0.75%/year was found, which is in line with historical and recent findings. Tracked silicon (Si) and cadmium telluride (CdTe) performed comparably with all fixed‐tilt systems. Higher PLRs were found for hotter temperature zones; cooler climates exhibit a median −0.48%/year loss, which increases to −0.88%/year in hotter climates. High‐efficiency module technologies showed median PLRs in line with conventional Si technologies but demonstrated markedly different PLR behavior when filtered only for low‐light conditions <600 W/m 2 . Causes for this technology‐dependent behavior are under investigation.

14 SOLAR ENERGY↗
DOE OSTI2023

Lifetime and Degradation Study of Poly(Methyl Methacrylate) via a Data-Driven Study Protocol Approach

We report to optimize and extend the service life of polymeric materials in outdoor environments, a domain knowledge-based and data-driven approach was utilized to quantitatively investigate the temporal evolution of degradation modes, mechanisms, and rates under various stepwise accelerated exposure conditions. Six formulations of poly(methyl methacrylate) (PMMA) with different combinations of stabilizing additives, including one unstabilized formulation, were exposed in three accelerated weathering conditions. Degradation was dependent on wavelength as samples in UV light at 340 nm (UVA) exposure showed the most yellowing. The unstabilized PMMA formulation showed much higher yellowness index values (59.5) than stabilized PMMA formulations (2–12). Urbach edge analysis shows a shift toward longer wavelength from 285 to 500 nm with increasing exposure time and an increased absorbance around 400 nm of visible region as the unstabilized samples increase in yellowing. The degradation mechanisms of PMMA were tracked using induced absorbance to dose at specific wavelengths that correspond to known degradation mechanisms. The degradation pathway of PMMA was modeled in a framework using network structural equation modeling (netSEM). netSEM showed changes in degradation pathway as PMMA transition stages of degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A macro-micro approach for identifying crystal plasticity parameters for necking and failure in nickel-based alloy haynes 282

Here, this work develops a two-scales macro-micro approach to address the challenge in calibrating crystal plasticity microstructural models when samples undergo necking prior to fracture. The crystal plasticity models are crucial for predicting the materials’ plastic deformation and failure at the microstructure level, identifying the materials’ intrinsic properties as well as investigating the microstructure-properties relationships. However, after necking occurs, the experimentally measured stress-strain curves fail to reflect the materials ‘true’ stress-strain behavior and cannot be directly fitted into crystal plasticity models. The proposed macro-micro approach employs a top-down strategy to address this challenge, which has been studied with experimental tests on precipitation-strengthened Ni-based superalloy Haynes® 282®. In this approach, a macro rate-dependent anisotropic plasticity model with Voce-type hardening and Rice-Tracey damage law is first utilized to model the deformation and failure of the tensile bar, and calibrated by matching the stress-strain curves, necking strain, and reduction of area. Especially, to match the testing results under different applied strain rates, the rate-sensitivity parameter m and saturation stress in the elasticity model are modified to incorporate dependence on the local strain rate. Then, the ‘true’ stress-strain behaviors are extracted from the necking zone of the macro-model, which are used to calibrate a micro-model with explicit microstructures and governed by an extended crystal plasticity law. The consistency between the micro-model and macro-model are enforced during calibration. The calibration outcomes from the crystal plasticity model elucidate the materials intrinsic properties for slip, hardening, and failure, which is vital for further investigations into the microstructure-properties relationship and for accurate prediction of the material behavior under various test and service conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A process optimization framework for laser direct energy deposition: Densification, microstructure, and mechanical properties of an Fe-Cr alloy

Laser Direct Energy Deposition (DED) is a metal additive manufacturing technique with the ability to fabricate large and complex parts through deposition of metal powders. However, achieving high-density parts and targeted build heights using DED can be challenging due to the large number of highly sensitive process variables. This work proposes a robust fabrication parameter optimization framework to generate process maps for primary parameters in DED, including laser power, scan speed, mass flow rate, hatch spacing, and layer height. Simple single-track experiments were utilized to map out the parameter space, and a combination of geometric criteria for hatch spacing and layer height were proposed to determine parameter sets that achieve both targeted build heights and mitigate porosity formation. Using this framework, specimens with >99 % density and consistent mechanical properties were successfully fabricated over a wide range of process parameters for an Fe-9wt.%Cr (Fe9Cr) alloy, a surrogate for radiation damage-resistant reduced activation ferritic/martensitic (RAFM) steels. Processing these materials using DED is of particular interest in the development of plasma facing components for nuclear fusion applications. The microstructure and mechanical properties of as-printed Fe9Cr were characterized using optical and electron microscopy, X-ray diffraction, and uniaxial tensile tests. As-printed Fe9Cr displayed ~25 % elongation and ultimate tensile strengths of up to 475 MPa which is comparable to similar wrought alloys. Finally, the proposed framework will allow for accelerated DED parameter optimization for novel alloy systems, as well as open the possibility for local microstructure control while simultaneously mitigating defect formation.

42 ENGINEERING↗
DOE OSTI2019

Water-Mediated Heterogeneously Catalyzed Reactions

Nature takes advantage of the pervasive presence of water to control many enzymatic reactions by utilizing the unique properties of water, which in turn help regulating reaction rates, selectivity, and rates of mass transfer. Some of the natural phenomena in which water plays the role of solvent, reactant, or byproduct find parallels in industrially relevant reactions catalyzed by synthetic heterogeneous catalysts. Here, we address different mechanistic features of catalytic reactions influenced by water. They include modification of reactant (or product) solubility and rate of mass transport; stabilization of reactants, products, and transition states, both in open and confined spaces; and direct participation in the catalytic phenomenon by remote bond polarization, H-shuttling, or acting as a cocatalyst.

Cooperative catalysis↗
DOE OSTI2024

Unveiling the Stability of Encapsulated Pt Catalysts Using Nanocrystals and Atomic Layer Deposition

Platinum exhibits desirable catalytic properties, but it is scarce and expensive. Optimizing its use in key applications such as emission control catalysis is important to reduce our reliance on such a rare element. Supported Pt nanoparticles (NPs) used in emission control systems deactivate over time because of particle growth in sintering processes. Here, in this work, we shed light on the stability against sintering of Pt NPs supported on and encapsulated in Al 2 O 3 using a combination of nanocrystal catalysts and atomic layer deposition (ALD) techniques. We find that small amounts of alumina overlayers created by ALD on preformed Pt NPs can stabilize supported Pt catalysts, significantly reducing deactivation caused by sintering, as previously observed by others. Combining theoretical and experimental insights, we correlate this behavior to the decreased propensity of oxidized Pt species to undergo Ostwald ripening phenomena because of the physical barrier imposed by the alumina overlayers. Furthermore, we find that highly stable catalysts can present an abundance of under-coordinated Pt sites after restructuring of both Pt particles and alumina overlayers at a high temperature (800 °C) in C 3 H 6 oxidation conditions. The enhanced stability significantly improves the Pt utilization efficiency after accelerated aging treatments, with encapsulated Pt catalysts reaching reaction rates more than two times greater than those of a control supported Pt catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Using Ambient Noise Seismic Interferometry and Local and Teleseismic Earthquakes to Determine Crustal Thickness and Moho Structure of the Northwestern Gulf of Mexico Margin

Abstract The northwestern part of the Gulf of Mexico has undergone two episodes of continental rifting and collision and produced structural artifacts that are now buried under many kilometers of sediments, complicating investigations of the region. The deep sedimentary package precludes outcrops and points to a need for the application of seismic techniques, but low rates of seismicity in the region and sparse seismic monitoring limit the utility of traditional seismic methods. We therefore use diverse data to perform two‐dimensional seismic tomography across the dry land portion of the margin. Data are gleaned from teleseismic and regional earthquakes, postcritical SsPmp arrivals, and direct P wave energy identified with seismic interferometry that were recorded by a broadband, three‐component array and partially overlapping short‐period, vertical‐component array. The Pn and postcritical SsPmp phase help constrain the Moho discontinuity, which a previous receiver function study suggested was absent beneath the seaward portion of this transect. A high‐velocity body is observed in the crust at the same location as the Houston Magnetic Anomaly, possibly marking rocks from the Alleghenian continental assembly. The crust thins from NW to SE, indicating that extension occurred mostly to the south of the Ouachita orogeny. Our model indicates that the margin's sediment package reaches a maximum thickness of ~15 km at the coast and becomes unresolvably thin near the Llano Uplift.

58 GEOSCIENCES↗
DOE OSTI2026

GPM IMERG V07B and V06B: Evaluation Using Ground-Based Radar Observations and Application in Global Mesoscale Convective System Tracking

This study evaluates the latest Global Precipitation Measurement (GPM) Integrated Multi-satellitE Retrievals for GPM (IMERG V07B) against its predecessor V06B, for studying mesoscale convective systems (MCSs). Both versions are compared using ground-based radar and rain gauge data from five meteorologically diverse regions: the contiguous United States (including eastern coastlines), Amazon rainforest, central Argentina mountains, equatorial Indian Ocean, and northern Australia across multiple temporal (0.5–6 hours) and spatial scales (0.1°–0.25°). An updated global MCS tracking dataset is developed by integrating satellite-observed infrared brightness temperature with IMERG V07B. Comparation of IMERG against radar observations reveals that IMERG demonstrates better performance in capturing the probability distribution and quantitative contributions of rainfall (from no-rain to intense-rain conditions) over tropical oceans than over land, with marked improvements in IMERG V07B for heavy-to-intense rain (> 10 mm h-1). Over land, systematic biases persist: IMERG tends to overestimate light-to-moderate rain (1–10 mm h-1) while underestimating heavy-to-intense rain. Additionally, aggregating IMERG to coarser resolutions (3-hourly or 0.25°) improves consistency with radar observations, outperforming the 1-hourly/0.1° resolution. The new IMERG V07B-based global MCS dataset exhibits consistent statistical characteristics with the V06B-based dataset, despite lower mean rain rates and reduced heavy precipitation contributions. These findings offer valuable insights for utilizing IMERG V07B in global precipitation studies, MCS characterization, and model evaluation.

Zhang, Sihan↗
DOE OSTI2024

A variational method for the sheath potential of hypersonic leading edges with space-charge limitations

Electron transpiration cooling for the leading edges (LE) of hypersonic aircraft utilizes thermionic emission; however, space-charge effects limit the electron emission rate, potentially diminishing the efficiency of this cooling mechanism. We develop a variational weak form of the Poisson equation that describes the sheath potential and then numerically solve it using the finite element method. This formulation has two main benefits: (1) the space-charge limit condition can be incorporated as a constraint and (2) it allows for the analysis of three-dimensional geometries with complex boundary conditions. We demonstrate that the current emitted from the surface of an LE is generally a small fraction of the Child–Langmuir limit due to space charge. We then propose several methods to enhance the emitted current from the surface and to boost the cooling effect of thermionic emission. These include increasing the plasma density, applying a negative surface potential, and using fringe fields under suitable geometric conditions. For a LaB6 emitting LE, the total emitted current is shown to be minimal and independent of the temperature of a surface with floating potential. However, when a negative potential is applied and the surface is heated, the emitted current follows the Richardson–Dushman relationship up to a critical temperature, beyond which it remains constant. At an applied surface potential of −5 V, the critical temperature is around 1700 K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Pseudo-neutrino versus recoil formalism for 4-body phase space and applications to nuclear decay

It is well known that the traditional treatment of radiative corrections that utilizes the “true” neutrino momentum$\overrightarrow{p}_v$ in the differential decay rate formula could lead to a ~α/π systematic error in certain observables due to the mistreatment of 4-body kinematics. Here, I investigate the theory structure of one of the proposed solutions, the “v'-formalism”, in the nonrecoil limit appropriate for neutron and nuclear β decays. I derive an elegant master formula for the 4-body phase space and use it to reanalyze the spectrum-dependent “outer” radiative corrections to the β decay of a polarized spin-half nucleus; a complete set of analytic expressions is provided for readers to straightforwardly obtain the final numerical results. Furthermore, I compare it to the “recoil formalism” where the energy of the recoil nucleus is fixed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Effective field theory for dark matter absorption on single phonons

Single phonon excitations, with energies in the 1–100 meV range, are a powerful probe of light dark matter (DM). Utilizing effective field theory, we derive a framework to compute DM absorption rates into single phonons starting from general DM-electron, proton, and neutron interactions. We apply the framework to a variety of DM models: Yukawa coupled scalars, axionlike particles with derivative interactions, and vector DM coupling via gauge interactions or Standard Model electric and magnetic dipole moments. We find that GaAs or Al 2 O 3 targets can set powerful constraints on a U ( 1 ) B − L model, and targets with electronic spin ordering are similarly sensitive to DM coupling to the electron magnetic dipole moment. Lastly, we make the code, (an extension of the existing code which computes general DM–single phonon scattering rates), publicly available. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗