Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Characterization of a Low-Temperature Plasma (LTP) Ambient Ionization Source Using Temporally Resolved Monochromatic Imaging Spectrometry

The low-temperature plasma (LTP) probe is a common plasma-based source used for ambient desorption–ionization mass spectrometry (MS). While the LTP probe has been characterized in detail with MS, relatively few studies have used optical spectroscopy. In this paper, two-dimensional (2D) imaging at selected wavelengths is used to visualize important species in the LTP plasma jet. First, 2D steady-state images of the LTP plume for N 2 + (391.2 nm), He I (706.5 nm), and N 2 (337.1 nm) emissions were recorded under selected plasma conditions. Second, time-resolved 2D emission maps of radiative species in the LTP plasma jet were recorded through the use of a 200 ns detection gate and varying gate delays with respect to the LTP trigger pulse. Emission from He I, N 2 + , and N 2 in the plasma jet region was found to show a transient behavior (often referred to as plasma bullets) lasting only a few microseconds. The N 2 + and He I maps were highly correlated in spatial and temporal structure. Further, emission from N 2 showed two maxima in time, one before and one after the maximum emission for N 2 + and He I, due to an initial electronic excitation wave and ion–electron recombination, respectively. Third, the interaction of the LTP probe with a sample substrate and an electrically grounded metallic needle was studied. Emission from a fluorophore on the sample substrate showed an initial photon-induced excitation from plasma-generated photons followed by electronic excitation by other plasma species. The presence of a grounded needle near the plasma jet significantly extended the plasma jet lifetime and also generated a long-lived corona discharge on the needle. The effect of LTP operating parameters on emission spectra was correlated with mass-spectral results including reagent-ion signals. Lastly, five movies provide a side-by-side comparison of the temporal behavior of emitting species and insights into the interactions of the emission clouds with a sample surface as well as an external needle. Temporally and spatially resolved imaging provided insights into important processes in the LTP plasma jet, which will help improve analyte ion sampling in LTP–MS.

Chan, George C. -Y.↗
NASA NTRS1981

Improved LEEM ranges over four decades

Low-energy electron magnetometer is suitable for terrestrial and aerial applications. Electron beam strikes tantalum collector plates in device, amplifying current and converting it to frequency. Current difference increases with beam deflection, providing measure of local field strength. LEEM operation requires no liquid helium unlike superconducting quantum interference device. LEEM sensitivity compares favorably with that of optical absorption magnetometers, and microsecond response range makes analyzing fast magnetic transients and signatures possible.

Singh, J. J.↗
NASA NTRS1994

Formal design and verification of a reliable computing platform for real-time control (phase 3 results)

In this paper the design and formal verification of the lower levels of the Reliable Computing Platform (RCP), a fault-tolerant computing system for digital flight control applications, are presented. The RCP uses NMR-style redundancy to mask faults and internal majority voting to flush the effects of transient faults. Two new layers of the RCP hierarchy are introduced: the Minimal Voting refinement (DA_minv) of the Distributed Asynchronous (DA) model and the Local Executive (LE) Model. Both the DA_minv model and the LE model are specified formally and have been verified using the Ehdm verification system. All specifications and proofs are available electronically via the Internet using anonymous FTP or World Wide Web (WWW) access.

Butler, Ricky W.↗
DOE OSTI2023

Comparison of the photochemical properties of phthalocyanine and hemiporphyrazine Zn(II) complexes

In DMF (dimethylformamide) solutions containing concentrations of (NEt 4 )Br (Et = ethyl) between 0.001 and 0.05 M both zinc phthalocyanine (Pc) and hemiporphyrazine (Hp) complexes are dissolved and form species [Zn(Hp)(Br)] – , and [Zn(Pc)(Br)] – . The increase in formation of the hemiporphyrazine bromide adduct is revealed by a linear dependence of the UV–Vis absorption spectrum on the Br – concentration whereas, over the same concentration range, absorption measurements indicate the formation of the phthalocyanine bromide adduct in solution. The x-ray and molecular structure of [NEt 4 ][Zn(Pc)(Br)](H 2 O) 0.33 has been determined showing the coordination of the Br – to the metal center. Photo-induced processes of the Zn complexes were investigated with deaerated solutions in a time scale t ≥10 ns. The 355 nm flash irradiation of [Zn(Hp)(Br)] – produced transient spectra which showed a bathochromic shift of the absorption maximum from 460 nm to 440 nm and an increase of the spectrum rate of decay with increasing Br – concentrations. The initial spectrum is attributed to the (nπ*–LLCT Br→Hp )[Zn(Hp)(Br)] – excited state which reacts with H-atom donors forming a radical [Zn(Hp-H)(Br)] •– . On the other hand, a transient spectrum, λ max ~600 nm, grows in a time t ≤0.6 µs when [Zn(Pc)(Br)] – is flash irradiated at 355 nm. The photoreactions of these complexes with SCN – and 2-propanol (IPA) were studied. Despite of the apparent similarity between both complexes, IPA was photo-oxidized by both complexes although by different mechanisms, an electron transfer with [Zn(Pc)(Br)] – and an H atom abstraction with [Zn(Hp)(Br)] – . Finally, the photo-oxidation of SCN– by [Zn(Pc)(Br)] – but not by [Zn(Hp)(Br)] – makes a remarkable difference between the photochemistries of these complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Blackstart and Fault Ride-Through Capability of DFIG-Based Wind Turbines

Grid-forming wind turbines must be able to re-energize transmission branches, motor loads, unbalanced loads, and power electronics loads following a blackout. Further, they must ride through faults that can arise during restoration. To tackle these challenges, this paper sets forth a grid-forming control strategy for wind turbines using doubly-fed induction generators (DFIGs). In particular, a special set of feedforward control loops are engineered to mitigate the impacts of restoration transients as well as symmetrical and asymmetrical faults on the regulation of DFIG rotor currents and stator voltages. This paper also leverages two-axis anti-windup regulators to bound two-axis voltage and current commands within ratings. As a result, the controller performance is demonstrated via a high-fidelity simulation model of a notional wind-dominant grid.

17 WIND ENERGY↗
DOE OSTI2020

In situ characterization of foreign object damage (FOD) in environmental-barrier-coated silicon carbide (SiC) ceramic

Environmental barrier coatings (EBCs) protect advanced ceramics and ceramic matrix composites (CMCs) from oxidation and corrosion in gas turbine engine environments. Foreign object damage (FOD), where debris impact the protective coatings, is a critical hazard which limits the turbine durability. Despite previous efforts to understand FOD in EBCs, a detailed understanding of the fundamental transient damage mechanisms is still lacking. In the current work, the real-time FOD behavior of a Mullite / Silicon EBC was visualized via a dynamic synchrotron X-ray source in phase contrast imaging (PCI) configuration. Prior to the in situ FOD experiments, the microstructure and composition of the coating were respectively characterized using a scanning electron microscope (SEM) and X-ray diffraction (XRD). The variation in the properties of the debris was modeled by ~ 1.5 mm diameter Partially Stabilized Zirconia (PSZ) and Silicon Nitride (Si 3 N 4 ) spheres. A modified light-gas gun setup, synchronized with the X-ray beam, was used to propel the projectiles at velocities ranging between 300 and 355 m·s -1 . Coated samples were impacted under a fully backed support configuration and at normal incidence. Coating penetration and delamination, as well as projectile deformation at the bond coat resulted for FOD by PSZ spheres. Comparatively, projectile fracture, with subsequent rebound of fragments, as well as complete coating penetration and delamination at the substrate interface occurred for FOD by Si 3 N 4 spheres. It should be noted that only cone cracking was observed for FOD by PSZ spheres while back surface cracking was present for both projectile types. Qualitative understanding of the driving forces for the observed damage mechanisms were provided.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Excitonic Spin-Coherence Lifetimes in CdSe Nanoplatelets Increase Significantly with Core/Shell Morphology

Here, we report spin-polarized transient absorption for colloidal CdSe nanoplatelets as functions of thickness (2–6 monolayer thickness) and core/shell motif. Using electro-optical modulation of co- and cross-polarization pump–probe combinations, we sensitively observe spin-polarized transitions. Core-only nanoplatelets exhibit few-picosecond spin lifetimes that weakly increase with layer thickness. The spectral content of differenced spin-polarized signals indicate biexciton binding energies that decrease with increasing thickness and smaller values than previously reported. Shell growth of CdS with controlled thicknesses, which partially delocalize the electron from the hole, significantly increases the spin lifetime to ~49 ps at room temperature. Implementation of ZnS shells, which do not alter delocalization but do alter surface termination, increased spin lifetimes up to ~100 ps, bolstering the interpretation that surface termination heavily influences spin coherence, likely due to passivation of dangling bonds. Spin precession in magnetic fields both confirms long coherence lifetime at room temperature and yields the excitonic g factor.

2D semiconductor↗
DOE OSTI2023

Highly Coupled Heterobicycle‐Fused Porphyrin Dimers: Excitonic Coupling and Charge Separation with Coordinated Fullerene, C 60

Abstract Porphyrin dimers have been widely explored and studied owing to their importance in photosynthetic systems. A vast variety of dimers linked by different groups and at different angles have been synthesized and studied; however, the means by which to synthesize rigidly fused porphyrins with direct conjugation of the chromophores remains limited. Such a class of porphyrins may possess interesting properties that unconjugated or stacked dimers may not exhibit. In this study, bisbenzimidazole‐fused porphyrin dimers and their mono‐ and bis−zinc derivatives are synthesized and characterized. As a consequence of excitonic coupling, these dimers exhibit a split Soret band irrespective of the metal ion in the porphyrin cavity. Steady‐state fluorescence and excitation spectra followed by femtosecond transient absorption spectral studies of the heterometallated dimer, (free‐base and zinc porphyrin) reveals the occurrence of efficient singlet‐singlet energy transfer (>95 % efficiency and rate constant >10 12 s −1 ) within the dyad. Further, donor‐acceptor conjugates were formed by metal‐ligand axial coordination of phenyl imidazole functionalized C 60 and were characterized by a variety of physicochemical techniques. Excited state charge separation from both singlet and triplet excited states of ZnP in the conjugates has been established. The lifetime of the final charge‐separated state was in the 30–40 μs range revealing charge stabilization. Interestingly, no charge separation in the conjugate derived from the heterometallated dimer was observed wherein excitation transfer dominated the process. The present study brings out the importance of the rigid π‐spacer connecting porphyrin dimers in governing the energy and electron transfer events when coupled with an electron acceptor.

Chemistry↗
DOE OSTI2022

Ligand-Structure-Dependent Coherent Vibrational Wavepacket Dynamics in Pyrazolate-Bridged Pt(II) Dimers

Bimetallic transition metal complexes have gained increasing attention because of their versatile functions in solar energy conversion and photonics applications arising from inter-metal electronic coupling. In bimetallic platinum (Pt) complexes, electronic communication between the Pt-centered and ligand-centered moieties have been shown to be critical for defining their excited-state dynamic trajectories undergoing either localized ligand centered (LC)/metal-to-ligand-charge-transfer (MLCT) transitions or delocalized metal-metal-to-ligand-charge-transfer (MMLCT) transitions. The branching of the excited-state intersystem crossing (ISC) trajectories are modulated through structural factors that alter the relative energies of the different states. In this study, we investigated the correlation of the structural factors influencing the excited state trajectories. Using femtosecond broadband transient absorption (fs-BBTA) spectroscopy, ultrafast dynamics in the excited state of two select Pt(II) dimers have been mapped out using their coherent vibrational wavepacket signatures in corresponding transient absorption spectra. To examine how the ligand moieties of the Pt(II) dimers influence excited-state dynamics and the coherent vibrational wavepacket behavior, here we carried out comparative studies on two pyrazolate-bridged Pt(II) dimers of the general formula [Pt( t Bu 2 Pz)(N^C)] 2 ( t Bu 2 Pz = 3,5-di-tert-butylpyrazole); N^C = 7,8-benzoquinoline (bzq, 1) or 1-phenylisoquinoline (piq, 2)). We found that photoexcitation into the low energy absorption bands of 1 and 2 respectively induce the formation of 1 MMLCT states from which ultrafast ISC proceeds, resulting in stimulated emission quenching and decoherence of the vibrational wavepacket motions. The results obtained in this study suggest that both energetics and the structural rigidity of the aromatic cyclometalating ligands in 1 and 2 can significantly influence dynamics along the excited state trajectory characterized by dephasing of the coherent oscillations. The collective results provide direct evidence of how ligand structure alters electronic dynamics along excited state trajectories associated with ISC processes, providing insight into using ligand design to steer photochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2021

Transient Effects in Atmosphere and Ionosphere Preceding the 2015 M7.8 and M7.3 Gorkha–Nepal Earthquakes

We analyze retrospectively/prospectively the transient variations of six different physical parameters in the atmosphere/ionosphere during the M7.8 and M7.3 earthquakes in Nepal, namely: 1) outgoing longwave radiation (OLR) at the top of the atmosphere (TOA); 2) GPS/TEC; 3) the very-low-frequency (VLF/LF) signals at the receiving stations in Bishkek (Kyrgyzstan) and Varanasi (India); 4) Radon observations; 5) Atmospheric chemical potential from assimilation models; and; 6) Air Temperature from NOAA ground stations. We found that in mid-March 2015, there was a rapid increase in the radiation from the atmosphere observed by satellites. This anomaly was located close to the future M7.8 epicenter and reached a maximum on April 21–22. The GPS/TEC data analysis indicated an increase and variation in electron density, reaching a maximum value during April 22–24. A strong negative TEC anomaly in the crest of EIA (Equatorial Ionospheric Anomaly) occurred on April 21, and a strong positive anomaly was recorded on April 24, 2015. The behavior of VLF-LF waves along NWC-Bishkek and JJY-Varanasi paths has shown abnormal behavior during April 21–23, several days before the first, stronger earthquake. Our continuous satellite OLR analysis revealed this new strong anomaly on May 3, which was why we anticipated another major event in the area. On May 12, 2015, an M7.3 earthquake occurred. Our results show coherence between the appearance of these pre-earthquake transient’s effects in the atmosphere and ionosphere (with a short time-lag, from hours up to a few days) and the occurrence of the 2015 M7.8 and M7.3 events. The spatial characteristics of the pre-earthquake anomalies were associated with a large area but inside the preparation region estimated by Dobrovolsky-Bowman. The preearthquake nature of the signals in the atmosphere and ionosphere was revealed by simultaneous analysis of satellite, GPS/TEC, and VLF/LF and suggest that they follow a general temporal-spatial evolution pattern that has been seen in other large earthquakes worldwide

Dimitar Ouzounov↗
DOE OSTI2020

Application of laser-driven capacitor-coil to target normal sheath acceleration

A laser-driven accelerator generates protons with tens of MeV in energy by a compact, strong, and transient accelerating electric field produced as a result of laser–plasma interactions at relativistic intensities. In previous studies, two- and three-dimensional particle-in-cell simulations revealed that the application of a kT-level axial magnetic field results in an enhancement of proton acceleration via the target normal sheath acceleration mechanism due to reduced lateral electron divergence and improved electron heating efficiency. An experimental investigation of this scheme on the GEKKO-XII and the LFEX facilities found that the number and maximum energy of the accelerated protons decreased with increasing the temporal delay between the pulse driving the external magnetic-field and the pulse accelerating the protons, contrary to the theoretical and numerical expectations. Finally, we identify sources responsible for the degradation of the proton beam performance and we propose an alternative experimental setup to mitigate the degradation in future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Flux-based three-dimensional electrodynamic modeling approach to superconducting circuits and materials

Modeling the behavior of superconducting electronic circuits containing Josephson junctions is crucial for the design of superconducting information processors and devices. In this paper, we introduce DEC-QED, a computational approach for modeling the electrodynamics of superconducting electronic circuits containing Josephson junctions in arbitrary three-dimensional electromagnetic environments. DEC-QED captures the nonlinear response and induced currents in BCS superconductors and accurately captures phenomena such as the Meissner effect, flux quantization, and Josephson effects. Using a spatial coarse-graining formulation based on discrete exterior calculus (DEC), DEC-QED can accurately simulate transient and long-time dynamics in superconductors. Finally, the expression of the entire electrodynamic problem in terms of the gauge-invariant flux field and charges makes the resulting classical field theory suitable for second quantization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Atomlike interaction and optically tunable giant band-gap renormalization in large-area atomically thin MoS2

Coulomb interactions in atomically thin transition metal dichalcogenides can be dynamically engineered by exploiting the dielectric environment to control the optical and electronic properties. Here we demonstrate an optically tunable giant band-gap renormalization (BGR) ~1200 and 850 meV from the edge of the conduction band and complete suppression of the exciton absorption in large-area single-layer (1L) and three-layer (3L) MoS2, respectively. The observed giant BGR is two orders of magnitude larger than that in the conventional semiconductors, and it persists for tens of ps. Strikingly, our results demonstrate photoinduced transparency at the electronic band gap using an intense optical field at room temperature. Exciton bleach recovery in 1L and 3L show a contrasting fluence-dependent response, demonstrating the layer-dependent optical tuning of exciton lifetime in a way that would be both reversible and real time. We find that the optical band gap (exciton resonance peak) shows a transient redshift followed by an anomalous blueshift from the lowest energy point as a function of the photo-generated carrier density. The observed exciton energy shift is analogous to atom-atom interactions, and it varies as a Lennard-Jones like potential as a function of the interexciton separation.

2D semiconductors↗
DOE OSTI2025

Assessing Dynamic Behaviors in Converter- Dominated Power Systems via RMS and EMT Simulations: A Study of Hawaii’s NELHA Microgrid

The transition from conventional power systems to converter-based microgrids has significantly advanced sustainability, clean energy integration, and operational reliability. However, this paradigm shift introduces operational challenges due to the intermittent nature of renewable energy sources and the non-linear characteristics of power electronic loads, inducing voltage fluctuations and harmonic distortions that complicate voltage and frequency regulation. Accurate dynamic modeling is hypothesized to be critical for capturing such effects, enabling reliable simulation and control strategy development. This study introduces an innovative dynamic modeling framework for a real-world converter-based microgrid, utilizing both root mean square (RMS) and electromagnetic transient (EMT) simulation methods. The microgrid was modeled in DIgSILENT PowerFactory, with simulations calibrated against high-resolution field measurements from SEL-735 power quality meters. Results show that RMS simulations effectively characterize steady-state dynamics, while EMT simulations are essential for capturing high-frequency transients and non-linear effects from photovoltaic inverters and variable frequency drives (VFDs). This complementary approach provides a comprehensive understanding of microgrid behavior, providing critical insights for improving simulation accuracy, advancing protection schemes, and improving resilience in future low-inertia power networks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Electromagnetic Analysis of ITER Electron Cyclotron Emission Model

The ITER electron cyclotron emission (ECE) diagnostic system is located at diagnostics shielding module 2 (DSM2), equatorial port 9 (EP9), to measure electron temperature profile and electron temperature fluctuations, and also assess nonthermal electron distributions via the oblique view. Therefore, ECE has both radial and oblique views with two hot sources for calibration and two couples of mirrors for two different optical views. It shall receive that the large electromagnetic (EM) loads up to 100-MN/m3 force density due to the eddy currents on the copper mirrors generated by the short transient plasma disruption. The simplified EM analysis model using magnetic field ( B ) data and flux variations (dB/dt) method based on the worst case of plasma disruption, MD_DW_EXP16MS_CATIII, has been developed to calculate the force and moments for each ECE component and support structure for EP9 DSM2 Bay2 and Bay3. The B and dB/dt methods use the constant B and dB/dt assumed for each local bay space, but the real B and dB/dt are basically varied along the radial direction of each bay. The complex global model with the local ECE components and support structure using Maxwell transient has been developed to do EM analysis to compare the results of the B and dB/dt models. The volumetric EM force density of the whole ECE components and support structure can be used for the subsequent structural analysis. In conclusion, combined with the thermal and nuclear loads and seismic and initial loads, the ECE integration analysis can be finalized for the operation case.

Fang, J. [Princeton Plasma Physics Laboratory (PPP↗
DOE OSTI2024

Transferable GeSn ribbon photodetectors for high-speed short-wave infrared photonic applications

We experimentally demonstrate a low-cost transfer process of GeSn ribbons to insulating substrates for short-wave infrared (SWIR) sensing/imaging applications. By releasing the original compressive GeSn layer to nearly fully relaxed state GeSn ribbons, the room-temperature spectral response of the photodetector is further extended to 3.2 μm, which can cover the entire SWIR range. Compared with the as-grown GeSn reference photodetectors, the fabricated GeSn ribbon photodetectors have a fivefold improvement in the light-to-dark current ratio, which can improve the detectivity for high-performance photodetection. The transient performance of a GeSn ribbon photodetector is investigated with a rise time of about 40 μs, which exceeds the response time of most GeSn (Ge)-related devices. In addition, this transfer process can be applied on various substrates, making it a versatile technology that can be used for various applications ranging from optoelectronics to large-area electronics. These results provide insightful guidance for the development of low-cost and high-speed SWIR photodetectors based on Sn-containing group IV low-dimensional structures.

42 ENGINEERING↗
DOE OSTI2021

Implementation of Disruptive Designs for Gas Turbine Components Utilizing Additive Manufacturing

Electron beam melting (EBM) is an additive manufacturing process used to print metallic components with complex geometries for aerospace applications. A preheating characteristic enables this technology to avoid large accumulation of residual stress during printing. However, cracking mechanisms particularly in Ni-based superalloys are associated with not only residual stress but also with microstructure (i.e., solidification morphology, transient evolution of γ'). Siemens is committed to AM technology for gas turbine applications. The ability to novel predictive designs of turbine blades would reduce process development time and allow acquisition of key microstructure and performance data early in a design campaign. Siemens initiated a project to establish the design rules for the fabrication of non-printable Nibased superalloys. This phase 1 program demonstrates the feasibility for virtual fabrication of the actual blade geometries through EBM process.

42 ENGINEERING↗
DOE OSTI2022

Deciphering Photochemical Reaction Pathways of Aqueous Tetrachloroauric Acid by X-ray Transient Absorption Spectroscopy

Photolysis reaction pathways of [Au(III)Cl 4 ] - in aqueous solution have been investigated by time-resolved X-ray absorption spectroscopy. Ultraviolet excitation directly breaks the Au-Cl bond in [Au(III)Cl 4 ] - to form [Au(II)Cl 3 ] - that becomes highly reactive within 79 ps. Disproportionation of [Au(II)Cl 3 ] - generates [Au(I)Cl 2 ] - , which is stable for ≤ 10 mu s. In contrast, intense near-infrared lasers photolyze water to generate hydrated electrons, which then reduce [Au(III)Cl 4 ] - to [Au(II)Cl 3 ] - at 5 ns. Hydrated electrons further induce a chain reaction from [Au(II)Cl 3 ] - to [Au(0)Cl] - by successively removing one Cl - . The zero-valency Au anions quickly polymerize and condense to form Au nanoparticles, which become the dominating product after 400 s. Here our results reveal that the condensation of zero-valency Au starts with dimerization of gold clusters coordinated with chloride ions rather than direct condensation of pristine Au atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗