SEARCH · Engineering Papers

Results for “texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

NASA NTRS1980

An improved evaluation of surface finish with a three dimensional tester

The design and programming of an automated three dimensional surface finish tester is described. The device produces a three dimensional image of the microscopic texture of the examined surface. The surface finish tester presents the following advantages over conventional profilometry: (1) more complete exploration of surface texture by successive probe sweeps; (2) automation of measuring and calculating; (3) more accurate representation of the derived parameters; (4) analysis of the degree of homogeneity of the surface; (5) three dimensional graphic representation accurately depicting the state of the surface; (6) detection of local imperfections; and (7) detection of scoring that occurred during machining.

GRANDADAM↗

NASA NTRS1980

An empirical model for the complex dielectric permittivity of soils as a function of water content

Recent measurements on the dielectric properties of soils have shown that the variation of dielectric constant with moisture content depends on soil types. The observed dielectric constant increases only slowly with moisture content up to a transition point. Beyond the transition it increases rapidly with moisture content. The moisture value at transition region was found to be higher for high clay content soils than for sandy soils. Many mixing formulas reported in the literature were compared with, and were found incompatible with, the measured dielectric variations of soil-water mixtures. A simple empirical model was proposed to describe the dielectric behavior of the soil-water mixtures. This model employs the mixing of either the dielectric constants or the refraction indices of ice, water, rock, and air, and treats the transition moisture value as an adjustable parameter. The calculated mixture dielectric constants from the model were found to be in reasonable agreement with the measured results over the entire moisture range of 0-0.5 cu cm/cu cm. The transition moistures derived from the model range from 0.16 to 0.33 and are strongly correlated with the wilting points of the soils estimated from their textures. This relationship between transition moisture and wilting point provides a means of estimating soil dielectric properties on the basis of texture information.

Wang, J. R.↗

NASA NTRS1981

Metallic minerals, thermal histories and parent bodies of some xenolithic, ordinary chondrite meteorites

The metal grains were investigated in the hosts and lithic fragments of various petrologic types in four xenolithic chondrites using reflected-light microscopy and electron-probe analysis. The kamacite, taenite, tetrataenite, and troilite in Weston and Fayetteville have many textures; on a Wood plot of the central Ni content vs dimensions, the taenite content shows scatter if metal grains had cooled at rates of 10-1000 and 1-100 K/Myr through 700 K. In contrast, metallic minerals in Bhola and Mezo-Madaras have uniform textures and plot coherently, indicating cooling rates of 0.1 and 1 K/Myr, respectively, in the 700-600 K range. It is concluded that the host and xenoliths in these chondrites were cooled slowly after compaction; their clasts underwent peak metamorphic temperatures and slow cooling through 700 K in different environments.

Scott, E. R. D.↗

NASA NTRS1981

A once-molten, coarse-grained, Ca-rich inclusion in Allende

A compact, spheroidal Type B inclusion in Allende contains melilite laths that project radially inward from the inclusion edge which show interference growth textures. The combined textural and chemical features of this object cannot be explained by independent vapor-solid condensation of grains in space, followed by random aggregation of these grains into an inclusion. Instead, it probably formed from a once-molten droplet that crystallized in response to radiative cooling from its outer surface. The crystallization sequence in this and another similar inclusion in which oxygen isotopes have been measured is melilite-spinel-anorthite-fassaite; this sequence shows that oxygen isotopic heterogeneities in coarse-grained inclusions were formed after complete solidification of these objects by partial exchange with a less O-16-rich gas, and not during or before a melting event.

Macpherson, G. J.↗

NASA NTRS1980

Soil moisture sensing with microwave techniques

Microwave approaches for the remote sensing of soil moisture are discussed, with the advantages described as follows: (1) the all-weather capability, (2) the greater penetration depth into the soil and through vegetation than with optical or infrared sensors, and (3) the large changes in the dielectric properties of soil produced by changes in water content. Both active and passive microwave approaches are discussed. The dependence of the relationship between microwave response and soil moisture on such things as soil texture, surface roughness, vegetative cover and nonuniform moisture and temperature profiles is analyzed from both the experimental and theoretical viewpoints. The dielectric properties of the soil are analyzed quantitatively, as these control the reflective and emissive properties of the soil surface, and a model for estimating a soil's dielectric properties from its texture and moisture content is also presented. Emissivity is calculated using the Fresnel equation of electromagnetic theory, and reflectivity is shown to be decreased by surface roughness, while the backscatter coefficient increases. It is demonstrated, that microwave radiometers are sensitive to soil moisture for a wide range of surface conditions, and that the longer wavelengths are best for soil moisture sensing.

Schmugge, T.↗

NASA NTRS1981

Metal and associated phases in Bishunpur, a highly unequilibrated ordinary chondrite

Bishunpur is one of the most unequilibrated ordinary chondrites, and preserves a relatively unaltered record of solar nebular processes. A survey of three polished thin sections of Bishunpur revealed that metal occurs in three textural domains: (1) in the matrix, (2) within chondrules and (3) in coatings on chondrules. A table provides a textural classification of the various metal types found in Bishunpur and their composition. Electron-microprobe analyses are discussed, and similarities between Bishunpur metal and opaques and those in carbonaceous chondrites are considered. Attention is given to low-Ni kamacite grains in chondrule olivine, Si-bearing chondrule metal, spheroidal metal in chondrules, metal and sulfide-bearing rims, coarse matrix metal, and fine matrix metal formation.

Rambaldi, E. R.↗

NASA NTRS1981

Use of imaging radar for geology and archeology

Imaging radar is shown to be a useful sensor for geological analysis as a standal one sensor in clouded regions or as a complementary data source with visible NIR systems. Radar image tone is a function of the radar system parameters (imaging geometry, frequency, polarization) and a function of the target (local slope, electrical properties, and surface roughness). Substantial topographic texture enhancement can be achieved for large scale features by using specular returns associated with steep-incidence radars or shadows associated with grazing-incidence systems. Texture enhancement also allows radar to image lineaments and archeological features, such as canals and causeways. Future multispectral radars may achieve better discrimination of subresolution structures. Seasat radar images of several geographic locations are provided.

Daily, M.↗

NASA NTRS1981

Refractory spherules in the Murchison meteorite - Are they condrules

The textural and mineralogical features of refractory spherules found in the Murchison meteorite are examined in relation to their probable origin. Based on a study of 12 samples it is found that the refractory spherules, with hibonite-bearing or spinel or spinel-perovskite cores surrounded by an iron-rich silicate layer, have compositions similar to those of coexisting irregular inclusions. The shape and internal textures of the spherules, however, suggest formation from a liquid. It is proposed that the spherules may be melted equivalents of the irregular inclusions, and thus may be properly termed chondrules. It is noted that such melting would have involved very high temperatures.

Macdougall, J. D.↗

NASA NTRS1982

Ion beam surface modification

The essential details of a study on the practical applications and mechanisms of polymer sputtering via Argon ion impact are summarized. The potential to modify the properties of polymer surfaces to improve their adherence, durability, biocompatibility, or other desirable properties by ion beam sputtering was emphasized. Ion beam milling can be of benefit as an analytical tool to obtain composition versus depth information. Ion impact from a directed ion gun source specifically etches polymer structures according to their morphologies, therefore this technique may be useful to study unknown or new morphological features. Factors addressed were related to: (1) the texture that arises on a polymer target after ion impact; (2) the chemistry of the top surface after ion impact; (3) the chemistry of sputtered films of polymeric material deposited on substrates placed adjacent to targets during ion impact; and (4) practical properties of textured polymer targets, specifically the wettability and adhesive bonding properties.

Dwight, D. W.↗

NASA NTRS1980

Aluminous mare basalts - New data from Apollo 14 coarse fines

Four aluminous mare basalt fragments selected from the Apollo 14 coarse fines collection are described: 14004,34 has an intergranular texture; 14160,103 and 14168,38 are granular; and 14256,10 is a fine-grained metabasalt. Pyroxene compositional trends vary among the fragments: in 14004,34 the trend is from ferroaugite to pyroxferrite; 14160,103 exhibits well-defined iron enrichment trends involving both pigeonite and augite; 14168,38 contains mostly pigeonite with minor augite; and pyroxene compositions in 14256,10 cluster in two distinct populations, high- and low-Ca. The igneous textures (except for 14256,10), the absence of discernible clasts, and low Ni compositions of metal grains lead to the conclusion that the fragments are pieces of pristine aluminous mare basalts. The marked differences in the REE patterns rule out a close genetic relation between any of the four basalts.

Warner, R. D.↗

NASA NTRS1980

A pristine eucrite-like gabbro from Descartes and its exotic kindred

A coarse-grained plagioclase-pyroxene gabbro (61224,6) with a cumulate texture suggestive of a slowly cooled plutonic rock was recovered from the 4-10 mm fraction of an Apollo 16 soil. The rock is uncommonly poor in feldspar and rich in Na for a lunar highlands lithology. Trace element analyses show extremely low siderophile element concentrations which confirm the pristine character indicated by the texture. The composition of 61224,6 is compared with those of 3 other pristine, exceptionally mafic, nonmare gabbros and of certain eucrites. 61224,6 and the three other gabbros have notable chemical differences but share relatively high ratios of Ti/Sm and Sc/Sm which suggest a possible genetic relationship. We conclude that 61224,6 represents a Na-rich cumulate from a layered intrusion within the highlands crust.

Marvin, U. B.↗

NASA NTRS1980

Controlled cooling and crystallization of a eucrite - Microprobe studies

The paper presents microprobe data on controlled cooling experiments on the eucrite meteorite Stannern, with emphasis on pyroxene zoning and chemistry, development of immiscible liquids in the mesostasis, and compositional boundary layer development adjacent to crystals. Controlled cooling rate experiments on melted samples of the meteorite yield a variety of petrographic textures that can be related to the cooling rate. Textures of clasts in Stannern suggest natural cooling rates of .1 to 100 C/hr for various clasts in the meteorite. Residual liquids are found to unmix at temperatures below about 990 C at moderate cooling rates. Results indicate that Stannern's pyroxenes have evidently undergone subsolidus internal cation exchange, thereby removing Fe-Mg variation in pyroxenes, lowering Al contents, and promoting exosolution.

Powell, M. A.↗

NASA NTRS1982

Conditions of formation of pyroxene excentroradial chondrules

Understanding the exact mechanism of origin of chondrules and the attendant physical conditions remains a key factor in understanding the early evolution of the solar system. The present investigation is concerned with an interpretation of the range of cooling histories needed to make chondrules. Chondrule-like spherules were formed in dynamic crystallization experiments, using gas-mixing facilities. It is found that textures in pyroxene-rich chondrules are well reproduced in the laboratory by cooling melts of chondrule composition from just above the liquidus. The range of pyroxene dendrite widths is slightly greater for natural chondrules than for droplets cooled from 50 C/hr to greater than 3000 C/hr. A blanketing medium of variable thickness explains the cooling rates lower than expected for radiative cooling. Experimental results, textures indicating incomplete melting, and isotopic disequilibrium are compatible with reheating of primitive material in the early solar nebula.

Hewins, R. H.↗

NASA NTRS1982

Glanggang and Selakopi - Two new paired Indonesian chondrites

The Indonesian meteorites Selakopi, and H-5 chondrite, and Glanggang, a breccia with H-6 fragments in an H-5 chondritic matrix, were recovered on the same day from sites only 50 km apart. The textures and compositions of Selakopi and the H-5 portion of Glanggang are very similar, indicating that they are closely related. The bulk chemistry of the H-6 portion of Glanggang is also very similar to that of the samples mentioned. It has therefore been concluded that Selakopi and the Glanggang breccia fragments were derived from the same source area and were probably ejected at the same time. Minor differences in bulk composition and texture among the three samples may be attributed to local variations on the parent body. However, for reasons stipulated in the conclusion, it is recommended that separate names be maintained for these meteorites until further, more definitive investigations have been made.

Fredriksson, K.↗

NASA NTRS1982

Ion-beam-induced topography and surface diffusion

It is pointed out that the development of surface topography along with enhanced surface and bulk diffusion processes accompanying ion bombardment have generated growing interest among users of ion beams and plasmas for thin film or material processing. Interest in these processes stems both from attempts to generate topographic changes for specific studies or applications and from the need to suppress or control undesirable changes. The present investigation provides a summary of the current status of impurity-induced texturing, with emphasis on recent developments. Particular attention is given to the texturing accompanying deposition of an impurity material onto a solid surface while simultaneously etching the surface with an ion beam. A description of experimental considerations is provided, and a thermal-diffusion model is discussed along with the development of sputter cones, and aspects of impact-enhanced surface diffusion.

Robinson, R. S.↗

NASA NTRS1979

Industrial ion source technology

In reactive ion etching of Si, varying amounts of O2 were added to the CF4 background. The experimental results indicated an etch rate less than that for Ar up to an O2 partial pressure of about .00006 Torr. Above this O2 pressure, the etch rate with CF4 exceeded that with Ar alone. For comparison the random arrival rate of O2 was approximately equal to the ion arrival rate at a partial pressure of about .00002 Torr. There were also ion source and ion pressure gauge maintenance problems as a result of the use of CF4. Large scale (4 sq cm) texturing of Si was accomplished using both Cu and stainless steel seed. The most effective seeding method for this texturing was to surround the sample with large inclined planes. Designing, fabricating, and testing a 200 sq cm rectangular beam ion source was emphasized. The design current density was 6 mA/sq cm with 500 eV argon ions, although power supply limitations permitted operation to only 2 mA/sq cm. The use of multiple rectangular beam ion sources for continuous processing of wider areas than would be possible with a single source was also studied. In all cases investigated, the most uniform coverage was obtained with 0 to 2 cm beam overlay. The maximum departure from uniform processing at optimum beam overlap was found to be +15%.

Kaufman, H. R.↗

NASA NTRS1982

Primary igneous carbon in ureilites - Petrological implications

The ureilite meteorites are carbonaceous olivine-pyroxene achondrites. They typically contain up to 4 wt.% carbon (carbonaceous matrix) as graphite, diamond, and lonsdaleite. Shock degradation has effectively obliterated primary textures in the carbonaceous matrix of previously described ureilites, a factor that has hampered efforts to explain the origin of this material. In contrast, the Antarctic ureilite ALHA78019 displays perfectly preserved primary textures in the carbonaceous matrix characterized by euhedral graphite blades intergrown with Fe-Ni metal and sulfide (diamonds are absent). This petrographic feature suggests that most graphite in ureilites originated by crystallization from a C-rich metallic phase. Assuming that fO2 is controlled by C-CO-CO2 reactions, the compositions of silicates and metals in ureilites imply a two-stage redox history. The noble gases and rare earths of ureilites are discussed in light of this model.

Berkely, J. L.↗

NASA NTRS1982

The Tucson iron and its relationship to enstatite meteorites

The Tucson meteorite was studied in order to search for the origin of its silicates and to explore a possible relationship between Tucson and the enstatite meteorites. All samples were analyzed with an electron microprobe. The silicate inclusions are described in terms of size and texture, and the silicate mineralogy, which is that of a highly reduced assemblage, is described. The bulk composition of the silicate inclusions is discussed. The results provide evidence of fast cooling. The textural and mineralogical data all point to the presence of a high temperature melt followed by rapid cooling and quenching. Several hypotheses for the origin of the Tucson are discussed, and it is concluded that the preferred hypothesis is that the meteorite formed by the high temperature impact mixing of a forsterite-enstatite silicate assemblage with Si-bearing metal, both having formed in a highly reduced environment.

Nehru, C. E.↗