Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Structure of the glass-forming metallic liquids by ab-initio and classical molecular dynamics, a case study: Quenching the Cu{sub 60}Ti{sub 20}Zr{sub 20} alloy

We consider the question of the amorphization of metallic alloys by melt quenching, as predicted by molecular dynamics simulations with semi-empirical potentials. The parametrization of the potentials is discussed on the example of the ternary Cu-Ti-Zr transition metals alloy, using the ab-initio simulation as a reference. The pair structure in the amorphous state is computed from a potential of the Stillinger-Weber form. The transferability of the parameters during the quench is investigated using two parametrizations: from solid state data, as usual and from a new parametrization on the liquid structure. When the adjustment is made on the pair structure of the liquid, a satisfactory transferability is found between the pure components and their alloys. The liquid structure predicted in this way agrees well with experiment, in contrast with the one obtained using the adjustment on the solid. The final structure, after quenches down to the amorphous state, determined with the new set of parameters is shown to be very close to the ab-initio one, the latter being in excellent agreement with recent X-rays diffraction experiments. The corresponding critical temperature of the glass transition is estimated from the behavior of the heat capacity. Discussion on the consistency between the structures predicted using semi-empirical potentials and ab-initio simulation, and comparison of different experimental data underlines the question of the dependence of the final structure on the thermodynamic path followed to reach the amorphous state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrogen trapping at neutron irradiation produced defects in recrystallized alpha annealed Zircaloy-4 - 2016-0060

Hydrogen is absorbed into zirconium alloy-clad fuel elements and structural components as a result of water-side corrosion in both pressurized water reactor (PWR) and boiling water reactor (BWR) environments. Increasing hydrogen concentrations in the zirconium alloy affect both its mechanical properties and dimensional stability. It is well known that hydrogen can diffuse relatively rapidly through zirconium base alloys (in relation to the lifetime of the components) in response to solid solution concentration, temperature, and stress gradients. Migration of hydrogen within a component through its life must be considered to reliably predict the performance of the component through life and even post-service life. Many of the physical properties needed to describe this process, such as the solubility of hydrogen in zirconium alloys, diffusion coefficients of hydrogen through zirconium alloys, and the Soret effect within zirconium alloys, already have been published. Many of these measurements have been made outside of the reactor core environment on nonirradiated zirconium alloys. This paper presents in-reactor, isothermal hydrogen diffusion data that show an effect of the in-reactor radiation environment on the final measured hydrogen concentrations. Samples used are similar to the hydrogen diffusion couples used by several investigators in the past to measure the hydride dissolution solvus as a function of temperature. The experimental results are interpreted on the basis of a physical model for hydrogen trapping that hypothesizes that hydrogen in solid solution in the zirconium lattice comes into thermodynamic equilibria with the hydride phase as well as into a steady-state equilibrium with trapping at irradiation-induced defects within the lattice. In agreement with the model, the irradiation effect on final measured concentrations is seen to be a decreasing function of the irradiation temperature between ∼271 deg. C and 354 deg. C, with any effect essentially eliminated by an irradiation temperature of 354 deg. C. (authors)

36 MATERIALS SCIENCE↗

Towards a Next Generation Search for Time-Reversal Violation Using Optically Addressable Nuclei in Cryogenic Solids (Final Technical Report, September 2018 - August 2023)

Certain rare pear-shaped nuclei have unmatched sensitivity to new kinds of forces between subatomic particles that are not the same when the arrow of time is reversed. Such forces are believed to be responsible for the near absence of antimatter in the observable Universe. These rare isotopes, some for the first time, will be produced in large numbers at the Facility for Rare Isotope Beams currently under operating at Michigan State University providing an unprecedented opportunity to probe for new physics. In anticipation, we are using abundant isotopes to develop new techniques to manipulate nuclei embedded inside an optically transparent solid at cryogenic temperatures. Implantation into a solid, such as neon and argon, is potentially an effective way to both efficiently capture and repeatedly probe the small number of rare nuclei, such as radium and protactinium. An optically transparent host medium at cryogenic temperatures would allow for the laser manipulation of the nuclei in a thermally quiet and stable environment for a wide variety of guest species such as polar molecules. In such systems, the nuclei are exposed to extraordinarily large electric fields and magnetic field gradients, which significantly amplifies the measurability of certain time-reversal violating effects. The potential sensitivity of this new approach could be at least a few hundred times greater than the current leading experiment which uses stable mercury atoms. We report on the design considerations and preliminary performance of an instrument used to produce and implant molecules into a frozen argon solid.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluating transition metal oxides within DFT-SCAN and SCAN + U frameworks for solar thermochemical applications

Using the strongly constrained and appropriately normed (SCAN) and SCAN+U approximations for describing electron exchange-correlation (XC) within density functional theory, we investigate the oxidation energetics, lattice constants, and electronic structure of binary Ce-, Mn-, and Fe-oxides, which are crucial ingredients for generating renewable fuels using two-step, oxide-based, solar thermochemical reactors. Unlike other common XC functionals, we find that SCAN does not over-bind the O 2 molecule, based on direct calculations of its bond energy and robust agreement between calculated formation enthalpies of main group oxides versus experiments. However, in the case of transition-metal oxides (TMOs), SCAN systematically overestimates (i.e., yields too negative) oxidation enthalpies due to remaining self-interaction errors in the description of their ground-state electronic structure. Adding a Hubbard U term to the transition-metal centers, where the magnitude of U is determined from experimental oxidation enthalpies, significantly improves the qualitative agreement and marginally improves the quantitative agreement of SCAN+U-calculated electronic structure and lattice parameters, respectively, with experiments. Importantly, SCAN predicts the wrong ground-state structure for a few oxides, namely, Ce 2 O 3 , Mn 2 O 3 , and Fe 3 O 4 , while SCAN+U predicts the right polymorph for all systems considered in this work. Furthermore, the SCAN+U framework, with an appropriately determined U, will be required to accurately describe ground-state properties and yield qualitatively consistent electronic properties for most transition-metal and rare earth oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical Stability and Dissolution Behavior of Ketoconazole–Organic Acid Coamorphous Systems

In an earlier investigation, coamorphous systems of ketoconazole (KTZ) prepared with each oxalic (OXA), tartaric (TAR), citric (CIT), and succinic (SUC) acid, revealed drug–acid ionic or hydrogen bonding interactions in the solid-state (Fung et al, Mol. Pharmaceutics, 2018, 15 (3), 1052–1061). We showed that the drug–acid interactions in KTZ–TAR were the strongest, followed by KTZ–OXA, KTZ–CIT, and KTZ–SUC. In this study, we investigated the crystallization propensity and dissolution behavior of the KTZ–acid coamorphous systems. When in contact with water (either as water vapor or as aqueous phosphate buffer), while KTZ–CIT and KTZ–TAR were physically stable and resisted crystallization, KTZ–SUC and KTZ–OXA crystallized more readily than KTZ alone. The dissolution performances of the coamorphous systems were compared using the area under the curve (AUC) obtained from the concentration–time profiles. KTZ–OXA exhibited the highest AUC, while it was about the same for KTZ–TAR and KTZ–CIT and the lowest for KTZ–SUC. The enhancement in dissolution appeared to become more pronounced as the strength of the acid (OXA > TAR > CIT > SUC) increased. Coamorphization with acid caused at least a twofold increase in AUC when compared with amorphous KTZ. The decrease in pH of the diffusion layer of the dissolving solid, brought about by the acid, is at least partially responsible for the dissolution enhancement. In addition, the particles of KTZ– OXA, KTZ–TAR, and KTZ–CIT were much smaller than those of KTZ–SUC. The consequent effect on surface area could be another contributing factor to the initial dissolution behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance of Spherical Quantum Well Down Converters in Solid State Lighting

We report the color conversion performance of amber and red emitting quantum dots (QDs) on InGaN solid-state lighting (SSL) light emitting diode (LED) packages. Spherical quantum well (SQW) architectures (CdS/CdSe 1- x S x /CdS) were prepared using a library of thio- and selenourea synthesis reagents and high throughput synthesis robotics. CdS/CdSe 1- x S x QDs with narrow luminescence bands were coated with thick CdS shells (thickness = 1.6-7.5 nm) to achieve photoluminescence quantum yields (PLQY) up to 88% at amber and red emission wavelengths (λ max = 600-642 nm, FWHM < 45 nm). The photoluminescence from SQWs encapsulated in silicone and deposited on LED packages was monitored under accelerated aging conditions (oven temperature = 85 °C, relative humidity = 5-85%, blue optical power density = 3-45 W/cm 2 ) by monitoring the red photon output over several hundred hours of continuous operation. The growth of a ZnS shell on the SQW surface increases the stability under long-term operation but also reduces the PLQY, especially of SQWs with thick CdS shells. The results illustrate that the outer ZnS shell layer is key to optimizing the PLQY and the long-term stability of QDs during operation on SSL packages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Intermetallic Reactivity Database: Compiling Chemical Pressure and Electronic Metrics toward Materials Design and Discovery

Here, the advent of high-throughput Density Functional Theory (DFT) calculations has supported the creation of large databases containing the quantitative output necessary for constructing theoretical phase diagrams and predicting physical properties. In this Article, we present a complementary resource, the Intermetallic Reactivity Database (IRD), focused on the chemical bonding features of solid-state structures and indicators of potential structural transformations. Each IRD entry augments common features, such as band structures and density of states (DOS) distributions, with chemically motivated information including DFT-Chemical Pressure (CP) schemes and visualizable representations of the atomic charges. Together, these data types enable the rationalization and prediction of potential structural phenomena encountered in intermetallic chemistry, as we illustrate with four examples: the origins of the Y 2 Ni 2 Mg structure in terms of CP features of its parent structures, the anticipation of intergrowth phases from the net atomic CPs collected in Al-containing binary phases, the correlation between trends in the CP schemes of CaCu 5 -type phases and experimentally observed structural variations, and finally, the development of theoretical methodology with the testing of a streamlined method generating DFT-CP schemes. Altogether, these examples highlight how the IRD supports the creation of models of structural chemistry that extend beyond the bounds of its entries.

36 MATERIALS SCIENCE↗

On the determination of phase boundaries via thermodynamic integration across coexistence regions

Specialized Monte Carlo methods are nowadays routinely employed, in combination with thermodynamic integration (TI), to locate phase boundaries of classical many-particle systems. This is especially useful for the fluid-solid transition, where a critical point does not exist and both phases may notoriously go deeply metastable. Using the Lennard-Jones model for demonstration, we hereby investigate on the alternate possibility of tracing reasonably accurate transition lines directly by integrating the pressure equation of state computed in a canonical-ensemble simulation with local moves. The recourse to this method would become a necessity when the stable crystal structure is not known. We show that, rather counterintuitively, metastability problems can be alleviated by reducing (rather than increasing) the size of the system. In particular, the location of liquid-vapor coexistence can exactly be predicted by just TI. On the contrary, TI badly fails in the solid-liquid region, where a better assessment (to within 10% accuracy) of the coexistence pressure can be made by following the expansion, until melting, of the defective solid which has previously emerged from the decay of the metastable liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Li 2 GeS 3 : Lithium Ionic Conductor with an Unprecedented Structural Type

Lithium-ion batteries (LIBs) are widely used in electric vehicles, mobile electronic devices, and large-scale stationary energy storage systems. However, their liquid electrolytes present significant safety concerns due to their inherent flammability. To address this, the focus has shifted toward all-solid-state batteries (ASSBs) utilizing inorganic solid electrolytes that promise enhanced safety. In this work, we report the discovery of a new crystal structural type of Li-ion conductor, Li 2 GeS 3 , with a unique structure, synthesized by a solid-state reaction from Li 2 S and GeS 2 . It was first reported in 2000 with an orthorhombic unit cell, but its detailed crystal structure remains veiled. Here, we have unveiled its structure for the first time, employing an ab initio structure determination technique from powder X-ray and time-of-flight neutron diffraction data. The compound has an unprecedented crystal structural type with a hexagonal $P6_1$ symmetry and a unit cell of α = 6.79364(4) Å and c = 17.90724(14) Å. Its structure is comprised of a distorted hexagonal close-packed arrangement of sulfur anions with three asymmetric metal atoms: Li1, Li2, and Ge are in tetrahedral cavities surrounded by sulfur atoms. The ionic conductivity of Li 2 GeS 3 was measured to be 1.63 × 10 –8 S cm –1 at 303 K and 2.45 × 10 –7 S cm –1 at 383 K. Bond valence energy landscape calculations revealed three-dimensional lithium diffusion pathways within the structure. This novel crystal structure in Li 2 GeS 3 holds the potential for developing high-performance ionic conductors through suitable chemical substitution and offers valuable insights into designing new ionic conductors for ASSBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A multi-functional coordination polymer coexisting spontaneous chirality resolution and weak ferromagnetism

A multifunctional homochiral coordination polymer, [Co(H{sub 2}O)(BDC)(4,4′-BPY)]∙3H{sub 2}O (1) (H{sub 2}BDC=1,2-benzenedicarboxylate and 4,4′-BPY=4,4′-bipyridine), has been successfully isolated from Co(II) ions and mixed ligands (1,2-benzenedicarboxylate and 4,4′-bipyridine). Complex 1, which exhibits spontaneous chirality resolution and weak ferromagnetism, is built by chiral helices interconnected via end-to-end 4,4′-BPY bridges into a two-dimensional (2D) layer structure. - Graphical abstract: A 2D cobalt coordination polymer compound showing spontaneous chirality resolution and weak ferromagnetism. - Highlights: • A new 2D cobalt mix-ligand coordination polymer complex has been synthesized. • The cobalt coordination polymer complex shows spontaneous chirality resolution in solid state. • The cobalt coordination polymer complex displays dominant and weak intrachain ferromagnetic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and properties of a new ternary phase Mg{sub 3+x}Ni{sub 7−x}B{sub 2} (0.17≤x≤0.66) and its Cu-doping effect

In recent years, the materials in the B–Mg–Ni system have been intensively studied due to their excellent properties of hydrogen storage and superconductivity. Solving the crystal structure of phases in this system will facilitate an understanding of the mechanism of their physical properties. In this study, we report the preparation, crystal structure and physical properties of a new ternary phase Mg{sub 3+x}Ni{sub 7−x}B{sub 2} in the B–Mg–Ni system. The Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase was prepared by solid-state reactions at 1073 K and its crystal structure was determined and refined using X-ray powder diffraction data. The Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase crystallizes in the Ca{sub 3}Ni{sub 7}B{sub 2} structure type (space group R-3m, no. 166) with a=4.9496(3)–5.0105(6) Å, c=20.480(1)–20.581(1) Å depending on the x value, where x varies from 0.17 to 0.66. Two samples with nominal compositions Mg{sub 10}Ni{sub 20}B{sub 6} and Mg{sub 12}Ni{sub 18}B{sub 6} were characterized by magnetization and electric resistivity measurements in the temperature range from 5 K to room temperature. Both samples exhibited metallic behavior and showed spin-glass-like behavior with a spin freezing temperature (T{sub f}) around 33 K. A study of the Cu-doping effect showed that limited Cu content can be doped into the Mg{sub 3+x}Ni{sub 7−x}B{sub 2} compound and T{sub f} decreases as the Cu content increases. - Graphical abstract: The crystal structure of the Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase. - Highlights: • The crystal structure and solid solution range of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} were revealed. • The magnetization and electrical resistivity of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} were studied. • The Cu-doping effect of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} was investigated.

36 MATERIALS SCIENCE↗

A review of composite polymer-ceramic electrolytes for lithium batteries

All solid-state lithium batteries are garnering attention in both academia and industry. Lithium-ion conductive polymers and lithium-ion conductive ceramics are the two major classes of solid electrolytes that have prevalently been pursued for many years. However, each of them has its own advantages and disadvantages. One approach to overcome the disadvantages and get the best out of each of those materials is a solid composite electrolyte that combines the advantages of inorganic ceramic electrolytes and solid polymer electrolytes. Such composite electrolytes can offer acceptable ionic conductivity, high mechanical strength, and favorable interfacial contact with electrodes, which can greatly improve the electrochemical performance of all-solid-state batteries compared to cells based on a polymer electrolyte alone or a ceramic electrolyte alone. We present in this review the state-of-the-art composite polymer-ceramic electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. The review mainly encompasses the polymer matrices, various ceramic filler materials, and the polymer/ceramics composite systems. Specifically, the structures, ionic conductivities, electrochemical/chemical stabilities, and fabrications of solid composite electrolytes are discussed in-depth. On the basis of previous work, a perspective on future research directions is highlighted for developing high-performance composite polymer-ceramic electrolytes.

25 ENERGY STORAGE↗

Precision requirements for spin-echo-based quantum memories

Spin-echo techniques are essential for achieving long coherence times in solid-state quantum memories for light because of inhomogeneous broadening of the spin transitions. It has been suggested that unrealistic levels of precision for the radio-frequency control pulses would be necessary for successful decoherence control at the quantum level. Here we study the effects of pulse imperfections in detail, using both a semiclassical and a fully quantum-mechanical approach. Our results show that high efficiencies and low noise-to-signal ratios can be achieved for the quantum memories in the single-photon regime for realistic levels of control pulse precision. We also analyze errors due to imperfect initial-state preparation (optical pumping), showing that they are likely to be more important than control pulse errors in many practical circumstances. These results are crucial for future developments of solid-state quantum memories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear-mirror mode-locked 1052 nm Yb:CALGO laser

We report a diode-pumped nonlinear mirror mode-locked solid-state Yb:CALGO laser operating at 1052 nm. The nonlinear mirror consists of a BBO crystal and a dichroic mirror. Continuous-wave mode-locking with a 1.78 W average power at 116 MHz is obtained. The slope efficiency is 22.6%. The bandwidth of the mode-locked laser is 1.2 nm, Considering GVM of BBO, the pulse width is calculated to be 2.3 ps.

42 ENGINEERING↗

First-principles design of a half-filled flat band of the kagome lattice in two-dimensional metal-organic frameworks

Here, we design from first principles a type of two-dimensional metal-organic framework (MOF) using phenalenyl-based ligands to exhibit a half-filled flat band of the kagome lattice, which is one of a family of lattices that show Lieb-Mielke-Tasaki’s flat-band ferromagnetism. Among various MOFs, we find that trans-Au-THTAP (THTAP=trihydroxytriaminophenalenyl) has such an ideal band structure, where the Fermi energy is adjusted right at the flat band due to unpaired electrons of radical phenalenyl. The spin-orbit coupling opens a band gap giving a nonzero Chern number to the nearly flat band, as confirmed by the presence of the edge states in first-principles calculations and by fitting to the tight-binding model. This is a novel and realistic example of a system in which a nearly flat band is both ferromagnetic and topologically nontrivial.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complex Dynamics in Argyrodite Solid-State Ion Conductors

Argyrodites are a compositionally diverse family of materials that exhibit remarkable ion transport properties. While the average crystal structures of argyrodites have been extensively studied, ion transport in these materials is governed by a confluence of dynamic processes spanning the cation, anion, and polyanionic sublattices. This Perspective synthesizes recent advances in understanding the role of dynamics in structural behavior and ion transport properties. We examine the compositional and structural motifs that govern order−disorder transitions within the argyrodite family and further explore how ion hopping is facilitated by lattice dynamics, from long-range phonons to local rotational dynamics of polyanionic species. Through the lens of dynamics spanning multiple time and length scales, we establish guiding principles that govern transport phenomena and highlight avenues of future study for the argyrodite family of ion conductors.

36 MATERIALS SCIENCE↗

Operando study of ceria-based solid oxide electrochemical cells

Many physical and chemical properties of ceria can be attributed to the tolerance of the fluorite structure to a high concentration of oxygen ion vacancies, which allows ceria to change oxidation states over a wide temperature range at low P O2 . Notably, on ceria surface, oxygen vacancies can rapidly formed and re-oxidized, giving ceria an enhanced ability to release and store oxygen and to split H 2 O in catalytic reactors. In the bulk, oxygen vacancies are the predominant charge carriers, which makes ceria one of the most important oxygen ion conducting solid electrolytes in solid oxide fuel cells (SOFCs). Therefore, the abilities to monitor the oxygen vacancy number at the surface and in bulk at a given pressure, temperature, and gas environment are important and highly desirable to explore and create new ceria based materials and devices.

25 ENERGY STORAGE↗

Novel Li{sub 4}Ti{sub 5}O{sub 12}/Sn nano-composites as anode material for lithium ion batteries

Research highlights: {yields} It is a novel attempt on nano composites involving Li{sub 4}Ti{sub 5}O{sub 12} and Sn to use as an anode material for lithium ion batteries. {yields} Li{sub 4}Ti{sub 5}O{sub 12} was obtained by a solid state route and nano-Sn particles were derived from a chemical reduction process. {yields} These materials are characterized for their physical and electrochemical characteristics. {yields} Li{sub 4}Ti{sub 5}O{sub 12}/Sn composite delivers stable and enhanced discharge capacity of 200mAhg{sup -1} and does not exhibit any irreversible capacity. {yields} The present investigation brings out novel high performing composites for lithium ion battery -- Abstract: Li{sub 4}Ti{sub 5}O{sub 12}/Sn nano-composites have been prepared as anode material for lithium ion batteries by high-energy mechanical milling method. Structure of the samples has been characterized by X-ray diffraction (XRD), which reveals the formation of phase-pure materials. Scanning electron microscope (SEM) and transmission electron microscope (TEM) suggests that the primary particles are around 100 nm size. The local environment of the metal cations is confirmed by Fourier transform infrared (FT-IR) and the X-ray photoelectron spectroscopy (XPS) confirms that titanium is present in Ti{sup 4+} state. The electrochemical properties have been evaluated by galvanostatic charge/discharge studies. Li{sub 4}Ti{sub 5}O{sub 12}/Sn-10% composite delivers stable and enhanced discharge capacity of 200 mAh g{sup -1} indicates that the electrochemical performance of Li{sub 4}Ti{sub 5}O{sub 12}/Sn nano-composites is associated with the size and distribution of the Sn particles in the Li{sub 4}Ti{sub 5}O{sub 12} matrix. The smaller the size and more homogeneous dispersion of Sn particles in the Li{sub 4}Ti{sub 5}O{sub 12} matrix exhibits better cycling performance of Li{sub 4}Ti{sub 5}O{sub 12}/Sn composites as compared to bare Li{sub 4}Ti{sub 5}O{sub 12} and Sn particles. Further, Li{sub 4}Ti{sub 5}O{sub 12} provides a facile microstructure to fairly accommodate the volume expansion during the alloying and dealloying of Sn with lithium.

36 MATERIALS SCIENCE↗