Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “robustness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Structural phase transitions of robust insulating Bi{sub 1-x}La{sub x}Fe{sub 1-y}Ti{sub y}O{sub 3} multiferroics

In contrast to leaky BiFeO{sub 3}, of which two structural phase transitions of cycloidal modulated antiferromagnetic-paramagnetic and ferroelectric-paraelectric are observed below 850 °C, chemical co-substitution to form Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} ternary solid solution makes these multiferroic ceramics become robust insulating low dielectric loss and exhibit rich structural phase transitions. Differential thermal analysis and temperature-dependent X-ray diffraction measurements probe four first-order structural phase transitions, e.g., T{sub H} = 305 °C, T{sub N} = 365 °C, T{sub C} = 810 °C, and T{sub S} = 830 °C observed in the Bi{sub 0.98}La{sub 0.02}Fe{sub 0.99}Ti{sub 0.01}O{sub 3} system, which are reasonably attributed to Brazovskii-type cycloidal modulated antiferromagnetic-helimagnetic (at T{sub H}) and helimagnetic-paramagnetic (at T{sub N}) magnetic phase transitions, ferroelectric-paraelectric (at T{sub C}) and rhombohedral-cubic (at T{sub S}) structural phase transitions, respectively. Magnetic phase transition temperatures change a little but ferroelectric and lattice structural phase transition temperatures decrease gradually with increasing co-substitution up to composition-induced rhombohedral-(pseudo-)cubic structural phase boundary. The first-order nature of magnetic phase transition and emergence of helimagnetic phase were attributed to Ti{sup 3+} d{sup 1} magnetic disorder distribution in the Fe{sup 3+} d{sup 5}-O-Fe{sup 3+} d{sup 5} chains, while the first-order nature becomes weak with increasing co-substitution, owing to decreased ferroelectric rhombohedral lattice distortion. An intermediate rhombohedral paraelectric phase is discovered intervening between ferroelectric rhombohedral and paraelectric cubic phase, of which the temperature range defined by difference between T{sub C} and T{sub S} increases with increasing co-substitution. It was found that T{sub C} and T{sub S} are able to be predicted quantitatively by reduced mass of unit cell. These findings enrich our understanding of ferroic phase transitions and advance designing novel high temperature multiferroic compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Dynamics of submicron aerosol droplets in a robust optical trap formed by multiple Bessel beams

In this paper, we model the three-dimensional escape dynamics of single submicron-sized aerosol droplets in optical multiple Bessel beam traps. Trapping in counter-propagating Bessel beams (CPBBs) is compared with a newly proposed quadruple Bessel beam (QBB) trap, which consists of two perpendicularly arranged CPBB traps. Calculations are performed for perfectly and imperfectly aligned traps. Mie-theory and finite-difference time-domain methods are used to calculate the optical forces. The droplet escape kinetics are obtained from the solution of the Langevin equation using a Verlet algorithm. Provided the traps are perfectly aligned, the calculations indicate very long lifetimes for droplets trapped either in the CPBB or in the QBB trap. However, minor misalignments that are hard to control experimentally already severely diminish the stability of the CPBB trap. By contrast, such minor misalignments hardly affect the extended droplet lifetimes in a QBB trap. The QBB trap is found to be a stable, robust optical trap, which should enable the experimental investigation of submicron droplets with radii down to 100 nm. Optical binding between two droplets and its potential role in preventing coagulation when loading a CPBB trap is briefly addressed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Robust random number generation using steady-state emission of gain-switched laser diodes

We demonstrate robust, high-speed random number generation using interference of the steady-state emission of guaranteed random phases, obtained through gain-switching a semiconductor laser diode. Steady-state emission tolerates large temporal pulse misalignments and therefore significantly improves the interference quality. Using an 8-bit digitizer followed by a finite-impulse-response unbiasing algorithm, we achieve random number generation rates of 8 and 20 Gb/s, for laser repetition rates of 1 and 2.5 GHz, respectively, with a ±20% tolerance in the interferometer differential delay. We also report a generation rate of 80 Gb/s using partially phase-correlated short pulses. In relation to the field of quantum key distribution, our results confirm the gain-switched laser diode as a suitable light source, capable of providing phase-randomized coherent pulses at a clock rate of up to 2.5 GHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Chemical solution deposition derived (001)-oriented epitaxial BiFeO{sub 3} thin films with robust ferroelectric properties using stoichiometric precursors (invited)

Phase pure bismuth ferrite (BiFeO{sub 3}) thin films with (001)-oriented epitaxial structure are realized on lanthanum strontium manganite (La{sub 0.67}Sr{sub 0.33}MnO{sub 3}) buffered (001)-SrTiO{sub 3} substrates by chemical solution deposition. The annealing process is optimized such that a stoichiometric precursor can be used to accurately control the Bi:Fe ratio. Ferroelectric, dielectric, and resistive switching behaviours are investigated for 40 nm, 70 nm, and 150 nm BFO thin films. While the thinnest film (40 nm) shows very leaky loops, square and fully saturated polarization hysteresis loops are shown for the thicker films. The highest remanent polarization (2P{sub r} = 100 μC/cm{sup 2}) and relative dielectric constant (ε{sub r} = 613) are obtained in the 150 nm BFO thin film. High cycle fatigue tests show that the thick films are resistant to polarization fatigue. Piezoresponse force microscopy results show that the domain structure varies with thickness. Resistive switching and polarization mediated diode effects are also observed. These robust properties suggest that chemical solution deposition derived BiFeO{sub 3} thin films can offer a viable low cost alternative.

36 MATERIALS SCIENCE↗
DOE OSTI2014

A compact, robust, and transportable ultra-stable laser with a fractional frequency instability of 1 × 10{sup −15}

We present a compact and robust transportable ultra-stable laser system with minimum fractional frequency instability of 1 × 10{sup −15} at integration times between 1 and 10 s. The system was conceived as a prototype of a subsystem of a microwave-optical local oscillator to be used on the satellite mission Space-Time Explorer and QUantum Equivalence Principle Space Test (STE-QUEST) ( http://sci.esa.int/ste-quest/ ). It was therefore designed to be compact, to sustain accelerations occurring during rocket launch, to exhibit low vibration sensitivity, and to reach a low frequency instability. Overall dimensions of the optical system are 40 cm × 20 cm × 30 cm. The acceleration sensitivities of the optical frequency in the three directions were measured to be 1.7 × 10{sup −11}/g, 8.0 × 10{sup −11}/g, and 3.9 × 10{sup −10}/g, and the absolute frequency instability was determined via a three-cornered hat measurement. Two additional cavity-stabilized lasers were used for this purpose, one of which had an instability σ{sub y} < 4 × 10{sup −16} at 1 s integration time. The design is also appropriate and useful for terrestrial applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

A robust platform cooled by superconducting electronic refrigerators

A biased tunnel junction between a superconductor and a normal metal can cool the latter electrode. Based on a recently developed cooler with high power and superior performance, we have integrated it with a dielectric silicon nitride membrane, and cooled phonons from 305 mK down to 200 mK. Without perforation and covered under a thin alumina layer, the membrane is rigorously transformed into a cooling platform that is robust and versatile for multiple practical purposes. We discussed our results and possibilities to further improve the device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Scalable and thermally robust perpendicular magnetic tunnel junctions for STT-MRAM

Thermal budget, stack thickness, and dipolar offset field control are crucial for seamless integration of perpendicular magnetic junctions (pMTJ) into semiconductor integrated circuits to build scalable spin-transfer-torque magnetoresistive random access memory. This paper is concerned with materials and process tuning to deliver thermally robust (400 °C, 30 min) and thin (i.e., fewer layers and integration-friendly) pMTJ utilizing Co/Pt-based bottom pinned layers. Interlayer roughness control is identified as a key enabler to achieve high thermal budgets. The dipolar offset fields of the developed film stacks at scaled dimensions are evaluated by micromagnetic simulations. This paper shows a path towards achieving sub-15 nm-thick pMTJ with tunneling magnetoresistance ratio higher than 150% after 30 min of thermal excursion at 400 °C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Robustness of n-GaAs carrier spin properties to 5 MeV proton irradiation

Modern electronic devices utilize charge to transmit and store information. This leaves the information susceptible to external influences, such as radiation, that can introduce short timescale charge fluctuations and, long term, degrade electronic properties. Encoding information as spin polarizations offers an attractive alternative to electronic logic that should be robust to randomly polarized transient radiation effects. As a preliminary step towards radiation-resistant spintronic devices, we measure the spin properties of n-GaAs as a function of radiation fluence using time-resolved Kerr rotation and photoluminescence spectroscopy. Our results show a modest to negligible change in the long-term electron spin properties up to a fluence of 1 × 10{sup 14} (5 MeV protons)/cm{sup 2}, even as the luminescence decreases by two orders of magnitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Residual tensile stress in robust insulating rhombohedral Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} multiferroic ceramics and its ability to pin ferroelectric polarization switching

Robust insulating rhombohedral Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} multiferroic ceramics with 0.02 ≤ x ≤ 0.12 and 0.01 ≤ y ≤ 0.08 are prepared by a refined solid-state reaction electroceramic processing. Residual internal tensile stresses existed in the ceramics according to unit cell volume enlargement observed by X-ray diffraction and frequency redshifts of Raman modes related to Bi motion and oxygen octahedral rotation detected by Raman scattering measurements. Residual internal tensile stresses in the ceramics are believed to originate from structural phase transitions through an intermediate paraelectric rhombohedral phase with a negative thermal expansion coefficient in the transformation from paraelectric cubic to ferroelectric rhombohedral phases. All of the rhombohedral Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} ceramics exhibited a pinched polarization versus electric field hysteresis loop indicative of ferroelectric subswitching. We argue that the residual internal tensile stresses are responsible for such ferroelectric polarization subswitching behavior in the Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Quantum control of isomerization by robust navigation in the energy spectrum

In this paper, we present a detailed study on the application of the quantum control technique of navigation in the energy spectrum to chemical isomerization processes, namely, CN–Li⇆ Li–CN. This technique is based on the controlled time variation of a Hamiltonian parameter, an external uniform electric field in our case. The main result of our work establishes that the navigation involved in the method is robust, in the sense that quite sizable deviations from a pre-established control parameter time profile can be introduced and still get good final results. This is specially relevant thinking of a experimental implementation of the method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Robust validation of approximate 1-matrix functionals with few-electron harmonium atoms

A simple comparison between the exact and approximate correlation components U of the electron-electron repulsion energy of several states of few-electron harmonium atoms with varying confinement strengths provides a stringent validation tool for 1-matrix functionals. The robustness of this tool is clearly demonstrated in a survey of 14 known functionals, which reveals their substandard performance within different electron correlation regimes. Unlike spot-testing that employs dissociation curves of diatomic molecules or more extensive benchmarking against experimental atomization energies of molecules comprising some standard set, the present approach not only uncovers the flaws and patent failures of the functionals but, even more importantly, also allows for pinpointing their root causes. Since the approximate values of U are computed at exact 1-densities, the testing requires minimal programming and thus is particularly suitable for rapid screening of new functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Block-diagonalization as a tool for the robust diabatization of high-dimensional potential energy surfaces

Robust diabatization techniques are key for the development of high-dimensional coupled potential energy surfaces (PESs) to be used in multi-state quantum dynamics simulations. In the present study we demonstrate that, besides the actual diabatization technique, common problems with the underlying electronic structure calculations can be the reason why a diabatization fails. After giving a short review of the theoretical background of diabatization, we propose a method based on the block-diagonalization to analyse the electronic structure data. This analysis tool can be used in three different ways: First, it allows to detect issues with the ab initio reference data and is used to optimize the setup of the electronic structure calculations. Second, the data from the block-diagonalization are utilized for the development of optimal parametrized diabatic model matrices by identifying the most significant couplings. Third, the block-diagonalization data are used to fit the parameters of the diabatic model, which yields an optimal initial guess for the non-linear fitting required by standard or more advanced energy based diabatization methods. The new approach is demonstrated by the diabatization of 9 electronic states of the propargyl radical, yielding fully coupled full-dimensional (12D) PESs in closed form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Robust authentication through stochastic femtosecond laser filament induced scattering surfaces

We demonstrate a reliable authentication method by femtosecond laser filament induced scattering surfaces. The stochastic nonlinear laser fabrication nature results in unique authentication robust properties. This work provides a simple and viable solution for practical applications in product authentication, while also opens the way for incorporating such elements in transparent media and coupling those in integrated optical circuits.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Robust analysis of trends in noisy tokamak confinement data using geodesic least squares regression

Regression analysis is a very common activity in fusion science for unveiling trends and parametric dependencies, but it can be a difficult matter. We have recently developed the method of geodesic least squares (GLS) regression that is able to handle errors in all variables, is robust against data outliers and uncertainty in the regression model, and can be used with arbitrary distribution models and regression functions. We here report on first results of application of GLS to estimation of the multi-machine scaling law for the energy confinement time in tokamaks, demonstrating improved consistency of the GLS results compared to standard least squares.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Robust ferromagnetism in Mn-doped MoS{sub 2} nanostructures

Layered transition metal dichalcogenides (TMDs) have attracted extensive attention due to their interesting properties originating from an effective honeycomb lattice and strong spin-orbit coupling, and have potential applications in catalysis, lithium batteries, photonic, electronic, and valleytronic devices. Introducing magnetism in the TMDs can lead to the interesting functionalities such as magnetic order and carrier spin polarization with potential applications in spintronics. Here, we demonstrate an effective approach to induce robust ferromagnetism in MoS{sub 2} nanostructures by transition metal doping. After doping with a few percent Mn{sup 2+}, the magnetism of MoS{sub 2} nanostructures is enhanced dramatically. Moreover, the magnetic properties are strongly temperature dependent, which is clearly different from the behavior of defect-induced magnetism. Our approach opens up the possibility for tuning the spin and magnetic properties in two-dimensional nanostructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Robust optical properties of sandwiched lateral composition modulation GaInP structure grown by molecular beam epitaxy

Double-hetero structure lateral composition modulated (LCM) GaInP and sandwiched LCM GaInP having the same active layer thickness were grown and their optical properties were compared. Sandwiched LCM GaInP showed robust optical properties due to periodic potential nature of the LCM structure, and the periodicity was undistorted even for thickness far beyond the critical layer thickness. A thick LCM GaInP structure with undistorted potential that could preserve the properties of native LCM structure was possible by stacking thin LCM GaInP structures interspaced with strain compensating GaInP layers. Furthermore, the sandwiched structure could be beneficial in realizing the LCM structure embedded high efficiency solar cells.

14 SOLAR ENERGY↗
DOE OSTI2017

Robust determination of the chemical potential in the pole expansion and selected inversion method for solving Kohn-Sham density functional theory

Fermi operator expansion (FOE) methods are powerful alternatives to diagonalization type methods for solving Kohn-Sham density functional theory (KSDFT). One example is the pole expansion and selected inversion (PEXSI) method, which approximates the Fermi operator by rational matrix functions and reduces the computational complexity to at most quadratic scaling for solving KSDFT. Unlike diagonalization type methods, the chemical potential often cannot be directly read off from the result of a single step of evaluation of the Fermi operator. Hence multiple evaluations are needed to be sequentially performed to compute the chemical potential to ensure the correct number of electrons within a given tolerance. This hinders the performance of FOE methods in practice. In this paper, we develop an efficient and robust strategy to determine the chemical potential in the context of the PEXSI method. The main idea of the new method is not to find the exact chemical potential at each self-consistent-field (SCF) iteration but to dynamically and rigorously update the upper and lower bounds for the true chemical potential, so that the chemical potential reaches its convergence along the SCF iteration. Instead of evaluating the Fermi operator for multiple times sequentially, our method uses a two-level strategy that evaluates the Fermi operators in parallel. In the regime of full parallelization, the wall clock time of each SCF iteration is always close to the time for one single evaluation of the Fermi operator, even when the initial guess is far away from the converged solution. We demonstrate the effectiveness of the new method using examples with metallic and insulating characters, as well as results from ab initio molecular dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Robustness to hydrodynamic instabilities in indirectly driven layered capsule implosions

Here, we report on a high convergence ratio liquid layer capsule implosion performed on the National Ignition Facility and contrast it to two previously reported layered implosions, in order to better understand how the capsule design impacts the hydrodynamic stability properties of implosions. Three implosions were performed with similar convergence ratios, fuel entropy, in-flight aspect ratios, and unablated shell mass; these qualities are important for determining hydrodynamic stability. Nevertheless, while two of these implosions exhibited robustness to asymmetries, including our recent experiment that had abnormally large amplitude long-wavelength capsule asymmetries, and produced more than 80% or the yield predicted by one-dimensional (1D) simulations, which do not account for the impacts of hydrodynamic instabilities, the third implosion produced only 14% of the yield from a 1D simulation. We perform a detailed computational analysis of these three shots, which suggests that the combination of several large asymmetry seeds result in the significantly degraded performance: a large 30 μm fill tube, the presence of a microstructure in the high density carbon ablator, and a higher level of drive asymmetry. This indicates that while it is possible to stabilize a high convergence ratio implosion through various means, the factors that determine stability cannot be considered independently. Furthermore, when these asymmetries are combined in 2D simulations, they can exhibit destructive interference and underpredict the yield degradation compared to experiment and three-dimensional simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗