Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resistive heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Final Technical Report for DE-FG02-86ER45268

This work addresses several key issues for understanding the unusual superconductivity in IBS, already shown to be technologically useful materials. 1a). Are reactive gasses like fluorine, chlorine, or water vapor behaving simply as electron donors to cause the superconductivity (at T conset =21 K) in undoped IBS like BaFe 2 As 2 ? 1b). Does exposure to fluorine increase T c in electron-doped IBS materials that are underdoped, e. g. Ba(Fe 0.96 Co 0.04 ) 2 As 2 ? 1c). Can fluorine as a reactive electron-donor, with its relatively greater ease of introduction into the lattice, be used as a rapid tool to search for superconductivity in new materials under investigation? Method of investigation: Using electron probe microanalysis, x-ray photoemission spectroscopy, and dynamical mean field theory calculations, we found that fluorine substitutes for As in the BaFe 2 As 2 lattice, and should therefore behave as an electron donor. We will F-dope Ba(Fe 0.96 Co 0.04 ) 2 As 2 and several new compounds under investigation for superconductivity upon doping to determine fluorine’s effect. Potential impact: If – like for fluorine - a brief exposure to hydrogen indeed causes superconductivity to a depth of 10 microns, this technique could be useful in creating long lengths of superconducting tape without the chemical aggressiveness of fluorine. Using the F ion, which substitutes for As - away from the Fe planes, in underdoped IBS like Ba(Fe 0.96 Co 0.04 ) 2 As 2 may form optimally doped IBS with less impurity scattering of the superconducting Fe 3d electrons resulting in improved superconducting properties. Another potential impact is the speed of checking for superconductivity in new materials under investigation for superconductivity upon doping. 2. What are the effects of Be substitution into IBS, beginning with FeSe and its derivatives (FeSe 1-x S x and FeSe 1-x Te x ) and BaFe 2-x Co x As 2 ? Method of investigation: We recently succeeded in adding Be to the FeSe lattice and found, surprisingly, a factor of four improvement of the low temperature residual resistivity ratio, consistent with improved electronic ordering. Using single crystal x-ray diffraction and x-ray dispersive spectroscopy, determine the concentration and location of the Be dopant. Using resistivity, determine if there is improvement in the residual resistivity achieved by Be doping in the FeSe derivatives (using AlCl 3 :KCl flux growth) and Co-doped BaFe 2 As 2 (using self-flux single crystal growth). Measuring resistivity under strain, determine the changes of the nematic susceptibility at the structural ordering transition causes by the increase in electronic order caused by Be doping in FeSe. Potential impact: Further understanding of IBS, including FeSe which - under physical pressure - has a T c increase to 40 K and -prepared as a monolayer - has a T c reported to be over 100 K. 3. In collaboration, prepare light atom compounds involving Be and look for high pressure-induced superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silver Nanowire-Indium Zinc Oxide Composite Flexible Transparent Conducting Electrodes Made by Spin- coating and Photonic Curing

Realizing high-throughput, low-cost perovskite solar cell (PSC) manufacturing is highly sought-after in photovoltaic (PV) research in recent years. To fully achieve roll-to-roll (R2R) manufacturing of PSCs, it is important to consider the flexible transparent electrode (TE). PET/ITO is a commonly used substrate for making flexible PSCs. When optimizing transparent conducting materials, there is a tradeoff between sheet resistance (Rsh) and optical transparency. Because commercial PET/ITO substrates are made with slow (~1 m/min) vacuum deposition processes, they tend to be expensive. Therefore, it would be advantageous to develop a high-throughput, R2R compatible, solution-deposition approach for fabricating the TE on PET substrates. While various solution-deposition processes, such as blade coating or slot-die coating, can achieve the desired web speed of > 10 m/min, there is still a need to improve the post-deposition annealing step. One promising post-deposition processing technique is intense-pulsed-light processing, also known as photonic curing. Photonic curing delivers short (0.01 – 100 ms) pulses of broadband (200 – 1500 nm) light from a xenon flash lamp to the samples. Any materials in the sample stack that absorb light will convert the impinging light pulse into heat within the sample, which drives changes in the sample (calcination, phase change, crystallization, etc.). Photonic curing has three main advantages over thermal annealing: 1. Faster processing speed (milliseconds or seconds). 2. Compatibility with plastic substrates. 3. Smaller physical footprint and less wasted energy. Since the light pulses are on for a short time, the intensity can be high while the total energy delivered to the sample is low, minimizing damages to the plastic substrates. In this work, a hybrid TE material is fabricated on PET substrates using photonic curing. The hybrid TE material contains a layer of silver nanowires (AgNWs) and a layer of metal-oxide (InOx, ITO, IZO, etc.). The AgNWs increase the light absorbed by the film during the photonic curing process, which leads to higher processing temperatures, possibly improving the conversion of the metal-oxide layer. The AgNWs also enhance the electrical conductivity of the final TE layer after photonic curing. A AgNW and metal-oxide bilayer is formed by spin coating each solution onto the PET substrate sequentially followed by a single photonic curing process. We use average optical transmittance (Tavg) from 400 to 700 nm and average Rsh to evaluate the TE performance. The following photonic curing parameters are varied to optimize Tavg (maximize) and Rsh (minimize): Pulse voltage, pulse envelope, number of micro-pulses, duty cycle, number of pulses, and pulse repetition rate. Preliminarily, we also observe a significant impact on the TE properties by the volume of AgNW deposited during the spin coating deposition step. Using dispense volumes of 80 µL and 20 µL, we achieve samples with Tavg = 73%, Rsh = 19 Ω/sq, and roughness = 9 nm, and Tavg = 83%, Rsh = 58 Ω/sq, and roughness = 5.6 nm, respectively, after photonic curing.

14 SOLAR ENERGY↗

UK-US Collaboration on Fossil Energy R&D: Steam Side Oxidation

In recent years, interest in increasing the efficiency of power plants based on steam generation has led to the need to develop and qualify materials capable of operating at steam temperatures and pressures significantly higher than those employed in current power plants. The overall focus of this international program is on using ferritic-martensitic steels to the maximum possible temperature, before switching to austenitic steels and/or Ni-based alloys. The relatively low Cr content of these alloys raises concerns regarding their resistance to steam oxidation at these higher temperatures. Earlier work in this collaboration addressed the reliability of data from atmospheric pressure, laboratory-based steam oxidation tests. This raised issues regarding how representative the laboratory-grown oxides were compared to those formed on service-exposed material and how the tests could be made more reliable by introducing added complexity. In general laboratory-scale exposures are conducted under isothermal conditions at ambient or slightly elevated pressure, using a relatively low flow rate of steam. The coupons used in these tests are normally flat cuboids which have been ground to homogenise the surface and remove any pre-existing features. However, there is a concern that these samples and exposures are not representative of service conditions, and so it is necessary to quantify the influence of transient conditions, such as heat flux, pressure and sample geometry/surface conditions. To address such concerns a new collaborative program of work was initiated to determine the influence of these added features on oxidation kinetics and oxide scale morphology. The overall aim was to improve the understanding of alloy performance in ultrasupercritical (USC) steam conditions and qualify suitable test procedures.

20 FOSSIL-FUELED POWER PLANTS↗

Independence of Environmental and Mechanical Damages on Silicone Adhesive Stored in a Thermo-Oxidative Environment

Abstract Elastomeric polymer materials hold a special place in today’s industrial sectors with respect to structural application needs. Low quality materials are detrimental to industries like aerospace, and automotive engineering. Assessment of the durability of elastomers for structural applications has been of much interest among the literary circles for decades and new materials keep outperforming the existing ones. Polymeric adhesives are one of the most abundantly used materials in these industries. All polymeric materials get damaged when in contact with aggressive environments in presence of high temperature and oxygen. Commonly referred to as thermo-oxidation, this environment exposes the material to heat and oxidation reactions in presence of oxygen. Resultantly, during service life, the damage to the polymer matrix is primarily caused by two factors: mechanical damage and environmental aging. Environmental aging is an irreversible phenomenon caused by changes in the molecular structure while mechanical damage maintains the shape of the polymer matrix, and the deterioration is mostly due to polymer chain mobility. Environmental aging can be caused by a single environmental agent or by a synergized impact of several environmental elements. Increasing temperature is found to be proportional to decreasing tensile strength and toughness of material. The rate and extent of degradation can be accessed by scrutinizing the changes in constitutive behavior of material through mechanical and chemical properties. Accelerated thermal aging is among the most common modes of process related degradation, leading generally to chain scission, and crosslinking phenomena and reduced resistance to fracture stress, and strain. In this experimental study, our goal is to separate the environmental degradation from mechanical damage. A silicone-based adhesive was aged in thermo-oxidative at (0%RH) aging environment. The damage and decay mechanisms have been used to draw a distinction between environmental degradation and mechanical damage. Material characterization included uniaxial tensile test (failure and cyclic) and scanning electron microscopy (SEM) tests on as-received and aged samples. Aging was conducted at three different temperatures (60°C, 80°C and 95°C) and six different exposure durations (1, 3, 10, 30, 90 and 200 days). This work confirms that environmental damage is superposed on top of the mechanical damage, and thus, they are separable. The total mechanical and environmental damage is a synergized effect of all exposure conditions and parameters involved i.e., aging time, temperature, and oxygen. The chemistry and mechanics of the polymer degradation were found to be in good agreement with each other.

Alazhary, Sharif↗

Screen-Printed Complex Ag Inks for Si HJT Metallization

Metallization using reactive metal inks has recently attracted significant research interest due to its advantages in cost of materials and manufacturing, while still achieving performance comparable to traditional fire-through particle pastes. Here, we present for the first time the use of reactive silver (Ag) inks via industrial screen-printing and inkjet printing methods for the metallization of different Si surfaces used in tunneling oxide passivating contacts (TOPCon) and Silicon heterojunction (SHJ) solar cells. Printed Ag lines exhibit a conductivity of ~5 Mu O·cm, which is approximately 3 times that of bulk Ag (1.59 µO·cm). The printed metal has a thickness of ~0.5-1.5 Mu m, an order of magnitude smaller than the current fire-through metal finger thickness (~15 Mu m). Contact resistivity measurements of the screen-printed and inkjet-printed samples on a transparent conducting oxide (TCO) surface show a very low value of ~0.2-12 mO·cm 2. Photoluminescence images of the metallized samples demonstrate minimal surface passivation degradation compared to the non-metallized areas (?iVoc <3.5 mV). Scanning electron microscopy images (SEM) reveal the structure of the printed metals on the Si surfaces as porous but much denser than fire-through Ag by nanoparticle paste. In the final presentation, we will showcase our results of printing these reactive Ag inks on high-efficiency heterojunction and TOPCon solar cells with full-area M6 wafers. Additionally, the adhesion of these reactive Ag inks on different Si surfaces according to ASTM D3359-17, as well as the performance of solar cells after standard IEC 61215 freeze/thaw and damp heat tests, will be presented. These new metal inks show promising potential as an alternative to the currently dominant particle-based pastes, offering lower Ag consumption and lower processing temperatures without compromising performance.

heterojunction solar cells↗

Development of Quantum Computing Interconnect Based on Aerosol Jet Printing and Electrochemical Deposition of Rhenium

The electrodeposition of rhenium on to a metal seed layer on flexible substrates is presented as a means to creating superconducting flexible cable connectors in an enabling plug-and-play approach for quantum computing. Cryogenic quantum electronics are currently connected using masses of stainless-steel coaxial cables that are bulky, rigid - both in form and design - and lead to significant joule heating, thermal noise, and cross talk. Here, we present an unprecedented approach to integrate an aerosol jet printed (AJP) metal seed layer with rhenium electrodeposition on a flexible substrate in the advancement of superconducting interconnect technologies. Silver and gold were printed using the ‘Nanojet’ aerosol jet printer on Kapton films. Adhesion of gold was found to be far superior to that of silver and adhesion on roughened Kapton surpassed that of its smooth counterpart. Electrodeposition of rhenium was successful on both silver and gold and an amorphous Re film was confirmed by XRD. Results for both materials are presented however due to the poor adhesion of silver to Kapton it was ruled out as a viable candidate. Composite materials were characterized by profilometry, EDS, XRD and FIBSEM. Electrical measurements of the composite at ambient temperature showed a critical temperature (T c ), where the resistance drops to 0, of 5.8 K, well above 4.2 K, the temperature of liquid helium. Stress-strain tests of the Ag-Re and Au-Re composites on roughened and smooth Kapton were completed. Cyclic flexure testing (200 cycles) to 1.25% strain showed smooth Kapton samples reach a stress of ~16 MPa, while Kapton roughened with sandpaper, reaches ~20MPa of stress for the same 1.25% strain.

36 MATERIALS SCIENCE↗

Surface magnetic anisotropy-mediated spin Hall magnetoresistance and spin Seebeck effects in a YIG/Pt heterostructure

The role of magnon-phonon coupling in the low-temperature behavior of the spin Seebeck effect (SSE) in YIG/Pt has been puzzling for more than a decade. Here, to elucidate the origin of the anomalous peak around 80 K, we investigate the temperature evolution of SSE, spin Hall magnetoresistance (SMR), and magnetic anisotropy in the same YIG/Pt heterostructure. We find that these effects, along with magnetic damping, show the peaks at the same temperature (~80 K). This simultaneous occurrence, where no heat is applied in the case of SMR, rules out the phonon-magnon drag related origin of SSE in the YIG/Pt system. We further show that the intrinsic surface anisotropy behavior in YIG is responsible for controlling the SSE, SMR, and magnetic damping in the YIG/Pt structure. Our findings not only help to understand these effects fundamentally but also provide an effective way for improving them by manipulating the surface magnetic anisotropy for spin caloritronic applications.

36 MATERIALS SCIENCE↗

Magnetoelastic-coupling-assisted first-order antiferromagnetic transitions in the corrugated honeycomb-lattice compounds (Ca, Sr) ⁢Mn 2 ⁢ P 2

Understanding the origin of unconventional magnetic order is a central theme in the research field of functional quantum materials for spin-dependent applications. In general, a paramagnetic (PM) to antiferromagnetic (AFM) transition is of thermodynamically second order in nature in the absence of a magnetic field. In the magnetically frustrated corrugated-honeycomb lattice compounds (Ca, Sr) ⁢Mn 2 ⁢ P 2 , electrical resistivity 𝜌 measurements in the 𝑎⁢𝑏 plane are reported to exhibit sharp discontinuities at the respective PM to AFM ordering temperatures 𝑇 N = 69.5 and 53 K, respectively, signifying the unusual first-order nature of the AFM transition. To reveal the origin of such anomalous transitions, high-resolution linear thermal-expansion measurements are reported for both CaMn 2 ⁢P 2 and SrMn 2 ⁢ P 2 in the 𝑎⁢𝑏 plane and along the 𝑐 axis using capacitance dilatometry. The thermal expansion measurements show a sharp discontinuity in Δ⁢𝐿/𝐿 at 𝑇 N , yielding a diverging behavior in the thermal expansion coefficient 𝛼⁡(𝑇) associated with strong magnetoelastic coupling, driving the first-order AFM transition in CaMn 2 ⁢P 2 . However, this effect is weaker in SrMn 2 ⁢P 2 , consistent with the magnetic entropy changes 𝑆⁡(𝑇) obtained from the heat-capacity measurements. Temperature-dependent 𝑎⁢𝑏-plane x-ray diffraction measurements for CaMn 2 ⁢ P 2 near its 𝑇 N yield a volume thermal expansion coefficient consistent with literature data for other materials. The uniaxial pressure derivatives of 𝑇 N in the two compounds are found to be respectively opposite in sign, presumably due to the different magnetic structures.

Pakhira, Santanu [Maulana Azad National Institute ↗

Si-Cr-Al-Mn Alloy for High Specific Resistivity

Laboratory material produced in budget period one met the target resistivity, mechanical and magnetic requirements for the Go/No-Go decision to move to industrial trials. The chosen chemistry settled on a high Cr strategy, with moderate Mn and Al additions, providing a good comprise on core loss and induction with minimal impact on mechanical properties, important to successful downstream processing. Industrial trials began in budget period two with the chosen chemistry, referred to as Alloy X. Difficulties occurred during initial hot rolling trials. Reheating the material using the standard NOES practice caused slab cracking from high thermal gradients in areas exposed to the roof burners, this was solved using a modified reheat practice. High Cr caused poor dynamic recrystallization during hot rolling, which was solved using a modified hot rolling practice. The high Cr content of the steel also caused poor decarburization during final annealing, which necessitated lowering the melt carbon aim for the final heat, together with a modified decarburization practice. Steel was finished to final thicknesses of 0.20 – 0.50 mm and evaluated for magnetic and mechanical properties. Although the target core loss for the 0.25 and 0.35 mm material was not achieved, significant reductions in high frequency core loss were measured, compared to equivalent commercially available material. Alloy X at 0.35 mm showed a 26 % and 23 % improvement at 400 HZ and 1000 Hz respectively, over Cliffs’ M-19 (0.35 mm) commercially available NOES. At 0.25 mm, Alloy X showed a 23 % and a 26 % improvement at 400 HZ and 1000 Hz respectively, over Cliffs’ HF-10 (0.25 mm) commercially available NOES. The 0.25 mm product was chosen for motor efficiency evaluation. ORNL collaborated with Cleveland-Cliffs (CC) to build, assemble, and test two 5HP motors: a baseline motor with M19 steel and a motor made with high efficiency steel (Alloy X) developed for the project. Overall, results were as expected with comparable performance at low speeds, and with more than 8% efficiency improvement for high speeds. Increased motor steel efficiency at high frequencies not only results in direct efficiency improvements but can yield reductions in motor size and cost by facilitating higher operation speeds, or by increasing the number of poles in the machine. This allows the production of more power-dense motors which are sometimes avoided with conventional material due to increased core losses. The material developed on this project provides more viable options for achieving improved motor efficiency or reduced motor size and cost.

36 MATERIALS SCIENCE↗

Octane Index Applicability over the Pressure-Temperature Domain

Modern boosted spark-ignition (SI) engines and emerging advanced compression ignition (ACI) engines operate under conditions that deviate substantially from the conditions of conventional autoignition metrics, namely the research and motor octane numbers (RON and MON). The octane index (OI) is an emerging autoignition metric based on RON and MON which was developed to better describe fuel knock resistance over a broader range of engine conditions. Prior research at Oak Ridge National Laboratory (ORNL) identified that OI performs reasonably well under stoichiometric boosted conditions, but inconsistencies exist in the ability of OI to predict autoignition behavior under ACI strategies. Instead, the autoignition behavior under ACI operation was found to correlate more closely to fuel composition, suggesting fuel chemistry differences that are insensitive to the conditions of the RON and MON tests may become the dominant factor under these high efficiency operating conditions. This investigation builds on earlier work to study autoignition behavior over six pressure-temperature (PT) trajectories that correspond to a wide range of operating conditions, including boosted SI operation, partial fuel stratification (PFS), and spark-assisted compression ignition (SACI). A total of 12 different fuels were investigated, including the Co-Optima core fuels and five fuels that represent refinery-relevant blending streams. It was found that, for the ACI operating modes investigated here, the low temperature reactions dominate reactivity, similar to boosted SI operating conditions because their PT trajectories lay close to the RON trajectory. Additionally, the OI metric was found to adequately predict autoignition resistance over the PT domain, for the ACI conditions investigated here, and for fuels from different chemical families. This finding is in contrast with the prior study using a different type of ACI operation with different thermodynamic conditions, specifically a significantly higher temperature at the start of compression, illustrating that fuel response depends highly on the ACI strategy being used.

02 PETROLEUM↗

Salt Hydrate Eutectic Thermal Energy Storage for Building Thermal Regulation (Final Technical Report)

Thermal energy storage is anticipated to play an important role in developing the power grid of the future - a power grid that meets increasing demands of users, is resistant to disruptions, but also allows for greater penetration of renewable resources. Specifically, thermal energy storage materials can be integrated into HVAC systems and building envelopes, where they can be used to shift power demands for building climate control from periods of peak demand to periods of low demand. Phase change materials (PCMs) are compelling as low-cost, high energy density thermal energy storage materials for building thermal management. However, there is a lack of high performance low-cost PCMs within the specific temperature ranges which would most effectively allow for power load shifting. Inorganic salt hydrates represent a promising class of PCMs, but their inherent limitations cause them to be currently unavailable for reliable building applications. The overarching goals of this research effort are to: 1) Discover low-cost, high volumetric density salt hydrate eutectic PCMs to store low-quality heat (10 to 40 °C); 2) Introduce a high thermal conductivity matrix to reduce the time constant for energy storage to ~0.1 to 1 hr, incorporate nucleation catalysts to decrease undercooling, and utilize microencapsulation and shape stabilization approaches, minimizing moisture loss/gain, mitigating phase separation, and maintaining stable melting behavior over the lifetime of the compounds; 3) Evaluate the impact these systems have on peak load shifting, and the potential for overall energy savings under different climatic scenarios and building configurations. These goals will be achieved by an integrated research program consisting of six cohesive research subtasks: 1) Materials discovery of eutectic salt hydrate PCMs by using computationally predicted thermodynamic equilibria, coupled with high-throughput experimental validation, 2) Rapid experimental screening of nucleation catalysts identified through robust computational databases, 3) Embedding salt hydrate PCM into a low cost and scalable high conductivity matrix, 4) Microencapsulation of salt hydrate microspheres using hybrid inorganic-polymer microencapsulation approach, 5) Shape stabilization by thermoreversible salt hydrate salogels, and 6) Analysis of end-use using thermal simulations, and characterization of mock-up energy storage finished components.

25 ENERGY STORAGE↗

Grey-box and ANN-based building models for multistep-ahead prediction of indoor temperature to implement model predictive control

Model-based predictive control (MPC) strategies for heating, ventilation, and air-conditioning (HVAC) systems present an opportunity to lower building energy consumption and operational costs. Such approaches rely on the development of a model to precisely forecast building thermal dynamics, such as room air temperature or heating/cooling rate, and make control-related decisions. The control-oriented modeling of building energy systems should be accurate in predicting indoor conditions and present low computational complexity. These features are the key challenge of implementing advanced control methods such as MPC. Extant studies on building modeling for MPC have focused on step-ahead forecasting techniques to forecast building thermal dynamics, while multistep-ahead forecasting is essential. Moreover, machine learning model suitable in case of the domain-based engineering expertise are also not available. To this aim, we perform a comparative analysis of the grey-box model based on a resistance-capacitance (RC) thermal network and a machine learning model composed of an artificial neural network (ANN) for multistep-ahead prediction of building thermal dynamics using current and historical data. Actual experimental data obtained from the Flexible Research Platform (FRP) in Oak Ridge National Laboratory (US) are used for estimation and validation purposes. The average root mean squared error (RMSE) of the grey-box and ANN models are 0.89 °C and 1.02°C, respectively. Finally, the results indicate that the grey-box model outperforms the ANN model in the considered validation periods in terms of accuracy and prediction stability.

42 ENGINEERING↗

Ideal MHD induced temperature flattening in spherical tokamaks

This paper extends the analysis first presented in Jardin et al. [Phys. Rev. Lett. 128, 245001 (2022)] to more thoroughly examine the stability of spherical torus equilibrium to ideal magnetohydrodynamic (MHD) infernal modes and their nonlinear consequences. Here we demonstrate that in a 3D resistive magnetohydrodynamic (MHD) simulation of a NSTX discharge, anomalous transport can occur due to these instabilities. Here we generate a family of equilibrium of differing β and use this to show that these instabilities could explain the experimentally observed flattening of the electron temperature profile at modest β. The modes studied in this paper are found to occur with poloidal mode number m and toroidal mode number n when the ratio m/ n is in the range of 1.2–1.5, when the central safety factor is in this range or slightly lower, and when the central region has very low magnetic shear. Our analysis gives some insight as to why the unstable linear growth rates are oscillatory functions of the toroidal mode number n. We present a simulation of an initially stable configuration that passes through a stability boundary at a critical β as it is heated. We also show that a particular NSTX discharge is unstable to these modes over a timescale of several hundred ms. We conclude that these modes must be taken into account when performing predictive modeling. An appendix shows that similar modes can be found in R / a = 4 tokamaks for certain q-profiles and β values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Spin Polarization and Rectification Driven by Chiral Perylene Diimide-Based Nanodonuts

The chirality-induced spin selectivity (CISS) effect allows thin-film layers of chiral conjugated molecules to function as spin filters at ambient temperature. Through solvent-modulated dropcasting of chiral l- and d-perylene diimide (PDI) monomeric building blocks, two types of aggregate morphologies, nanofibers and nanodonuts, may be realized. Spin-diode behavior is evidenced in the nanodonut structures. Stacked PDI units, which form the conjugated core of these nanostructures, dominate the nanodonut–Au electrode contact; in contrast, the AFM tip contacts largely the high-resistance solubilizing alkyl chains of the chiral monomers that form these nanodonuts. Current–voltage responses of the nanodonuts, measured by magnetic conductive AFM (mC-AFM), demonstrate substantial spin polarizations as well as spin current rectification ratios (>10) that exceed the magnitudes of those determined to date for other chiral nanoscale systems. Furthermore, these results underscore the potential for chiral nanostructures, featuring asymmetric molecular junctions, to enable CISS-based nanoscale spin current rectifiers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Disruption prediction with artificial intelligence techniques in tokamak plasmas

In nuclear fusion reactors, plasmas are heated to very high temperatures of more than 100 million kelvin and, in so-called tokamaks, they are confined by magnetic fields in the shape of a torus. Light nuclei, such as deuterium and tritium, undergo a fusion reaction that releases energy, making fusion a promising option for a sustainable and clean energy source. Tokamak plasmas, however, are prone to disruptions as a result of a sudden collapse of the system terminating the fusion reactions. As disruptions lead to an abrupt loss of confinement, they can cause irreversible damage to present-day fusion devices and are expected to have a more devastating effect in future devices. Disruptions expected in the next-generation tokamak, ITER, for example, could cause electromagnetic forces larger than the weight of an Airbus A380. Furthermore, the thermal loads in such an event could exceed the melting threshold of the most resistant state-of-the-art materials by more than an order of magnitude. In this work, to prevent disruptions or at least mitigate their detrimental effects, empirical models obtained with artificial intelligence methods, of which an overview is given here, are commonly employed to predict their occurrence—and ideally give enough time to introduce counteracting measures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal conductivity evaluation of ion irradiated Si 3 N 4 and ZrN ceramics using spatial domain thermoreflectance

Nitride ceramics have been investigated for different applications in the nuclear industry, such as space nuclear power, fusion reactor diagnostics and plasma heating, inert matrix fuels, and accident tolerant fuels. Although thermal conductivity remains one of the most important properties to track following irradiation, traditional techniques such as laser flash and xenon flash are limited to bulk sample characterization, which requires lengthy and cost-consuming neutron irradiation. This work used spatial domain thermoreflectance (SDTR) for the micrometer-scale measurement of thermal conductivity in 15 MeV Ni ion-irradiated silicon nitride and zirconium nitride from 1 to 50 dpa and 300 to 700 °C. Here, the SDTR-measured unirradiated thermal conductivity was found to be consistent with the published data on bulk samples. Electrically conductive ZrN exhibits modest reduction after irradiation which is minimal at the highest irradiation temperatures. In electrically insulating Si 3 N 4 , the reduction is more significant and unlike ZrN, the reduction remains significant even at a higher irradiation temperature. The thermal resistance evolution following irradiation was compared with lattice swelling, which was determined using grazing incidence x-ray diffraction, and radiation-induced defects were observed using transmission electron microscopy. A saturation value was observed between 15 and 50 dpa for thermal conductivity degradation in both nitride ceramics and a direct correlation with high-temperature defect recombination was observed, as well as the potential presence of additional carrier scattering mechanisms.

36 MATERIALS SCIENCE↗

Dissipation in the magnetic turbulence of reversed field pinch plasmas

Reversed field pinch plasmas are subject to tearing instability that creates a broad spectrum of magnetic fluctuations. The dominant fluctuations have poloidal and toroidal mode numbers (m,n) = (1,6 - 10) and can grow to 2 - 3% of the mean magnetic field. Through non-linear coupling this growth culminates in a strong reconnection event and broadening of the magnetic spectrum extending to the ion gyroradius scale. Multiple developments occur during the reconnection stage: ions and electrons are energized, magnetic fluctuation amplitudes increase, plasma flow is halted, and the toroidal magnetic flux increases in a sawtooth-like fashion as the RFP dynamo becomes stronger. Magnetic fluctuations are measured in the plasma edge at multiple radial locations from r/a = 0.75 to 0.96 to assess and characterize the magnetic turbulence. The measured spectrum perpendicular to the mean field, S(k ⊥ ), can be fit to a model spectrum consisting of power law and exponential component with one free parameter that characterizes dissipation. The measured dissipation is much larger than estimated from classical viscous or resistive dissipation, but it is consistent with a flow damping measurement of anomalous viscosity. The measurements show an evolution of the spectrum during which fluctuation power builds up in the smallest wavenumbers and cascades to the larger wavenumber due to the non-linear coupling between the linear (m,n) = (1, > 6) and the non-linear (m,n) = (0, 1) tearing mo

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Selected Area Deposition of High Purity Gold for Functional 3D Architectures

Selected area deposition of high purity gold films onto nanoscale 3D architectures is highly desirable as gold is conductive, inert, plasmonically active, and can be functionalized with thiol chemistries, which are useful in many biological applications. Here, we show that high-purity gold coatings can be selectively grown with the Me 2 Au (acac) precursor onto nanoscale 3D architectures via a pulsed laser pyrolytic chemical vapor deposition process. The selected area of deposition is achieved due to the high thermal resistance of the nanoscale geometries. Focused electron beam induced deposits (FEBID) and carbon nanofibers are functionalized with gold coatings, and we demonstrate the effects that laser irradiance, pulse width, and precursor pressure have on the growth rate. Furthermore, we demonstrate selected area deposition with a feature-targeting resolutions of ~100 and 5 µm, using diode lasers coupled to a multimode (915 nm) and single mode (785 nm) fiber optic, respectively. The experimental results are rationalized via finite element thermal modeling.

3-dimensional nanostructures↗