Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regional models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Simulation of high-frequency dissolved oxygen dynamics in a shallow estuary, the Corsica River, Chesapeake Bay

Understanding shallow water biogeochemical dynamics is a challenge in coastal regions, due to the presence of highly variable land-water interface fluxes, tight coupling with sediment processes, tidal dynamics, and diurnal variability in biogeochemical processes. While the deployment of continuous monitoring devices has improved our understanding of high-frequency (12 - 24 hours) variability and spatial heterogeneity in shallow regions, mechanistic modeling of these dynamics has lagged behind conceptual and empirical models. The inherent complexity of shallow water systems is represented in the Corsica River estuary, a small basin within the Chesapeake Bay ecosystem, where abundant monitoring data have been collected from long-term monitoring stations, continuous monitoring sensors, synoptic sensor surveys, and measurements of sediment-water fluxes. A state-of-the-art modeling system, the Semi-implicit Cross-scale Hydroscience Integrated System Model (SCHISM), was applied to the Corsica domain with a high-resolution grid and nutrient loads from the most recent version of the Chesapeake Bay watershed model. The Corsica SCHISM model reproduced observed high-frequency variability in dissolved oxygen, as well as seasonal variability in chlorophyll-a and sediment-water fluxes. Time-series signal analyses using Empirical Model Decomposition and spectral analysis revealed that the diurnal and M2 tide frequencies are the dominant high-frequency modes and physical transport contributes a larger share to dissolved oxygen budgets than biogeochemical processes on an hourly time scale. Heterogeneity and patchiness in dissolved oxygen resulting from phytoplankton distributions and geometry-driven eddies amplify the physical transport effect, and on longer time scales oxygen is controlled more by photosynthesis and respiration. Our simulation demonstrates that interactions among physical and biological dynamics generate complex high-frequency variability in water quality and non-linear reposes to nutrient loading and environmental forcing in shallow water systems.

54 ENVIRONMENTAL SCIENCES↗

Composition and Pressure Effects on Partitioning of Ferrous Iron in Iron-Rich Lower Mantle Heterogeneities

Both seismic observations of dense low shear velocity regions and models of magma ocean crystallization and mantle dynamics support enrichment of iron in Earth’s lowermost mantle. Physical properties of iron-rich lower mantle heterogeneities in the modern Earth depend on distribution of iron between coexisting lower mantle phases (Mg,Fe)O magnesiowüstite, (Mg,Fe)SiO3 bridgmanite, and (Mg,Fe)SiO3 post-perovskite. The partitioning of iron between these phases was investigated in synthetic ferrous-iron-rich olivine compositions (Mg0.55Fe0.45)2SiO4 and (Mg0.28Fe0.72)2SiO4 at lower mantle conditions ranging from 33–128 GPa and 1900–3000 K in the laser-heated diamond anvil cell. The resulting phase assemblages were characterized by a combination of in situ X-ray diffraction and ex situ transmission electron microscopy. The exchange coefficient between bridgmanite and magnesiowüstite decreases with pressure and bulk Fe# and increases with temperature. Thermodynamic modeling determines that incorporation and partitioning of iron in bridgmanite are explained well by excess volume associated with Mg-Fe exchange. Partitioning results are used to model compositions and densities of mantle phase assemblages as a function of pressure, FeO-content and SiO2-content. Unlike average mantle compositions, iron-rich compositions in the mantle exhibit negative dependence of density on SiO2-content at all mantle depths, an important finding for interpretation of deep lower mantle structures.

Dorfman, Susannah M. (ORCID:0000000239689592)↗

Linking large-scale circulation patterns to low-cloud properties

Abstract. The North Pacific High (NPH) is a fundamental meteorological feature present during the boreal warm season. Marine boundary layer (MBL) clouds, which are persistent in this oceanic region, are influenced directly by the NPH. In this study, we combine 11 years of reanalysis and an unsupervised machine learning technique to examine the gamut of 850 hPa synoptic-scale circulation patterns. This approach reveals two distinguishable regimes – a dominant NPH setup and a land-falling cyclone – and in between a spectrum of large-scale patterns. We then use satellite retrievals to elucidate for the first time the explicit dependence of MBL cloud properties (namely cloud droplet number concentration, liquid water path, and shortwave cloud radiative effect – CRESW) on 850 hPa circulation patterns over the northeast Pacific Ocean. We find that CRESW spans from −146.8 to −115.5 W m−2, indicating that the range of observed MBL cloud properties must be accounted for in global and regional climate models. Our results demonstrate the value of combining reanalysis and satellite retrievals to help clarify the relationship between synoptic-scale dynamics and cloud physics.

54 ENVIRONMENTAL SCIENCES↗

Capturing the interactions between ice sheets, sea level and the solid Earth on a range of timescales: a new “time window” algorithm

Retreat and advance of ice sheets perturb the gravitational field, solid surface and rotation of the Earth, leading to spatially variable sea-level changes over a range of timescales $\textit{O}$ (10 0–6 years), which in turn feed back onto ice-sheet dynamics. Coupled ice-sheet–sea-level models have been developed to capture the interactive processes between ice sheets, sea level and the solid Earth, but it is computationally challenging to capture short-term interactions $\textit{O}$ (10 0–2 years) precisely within longer $\textit{O}$ (10 3–6 years) simulations. The standard forward sea-level modelling algorithm assigns a uniform temporal resolution in the sea-level model, causing a quadratic increase in total CPU time with the total number of input ice history steps, which increases with either the length or temporal resolution of the simulation. In this study, we introduce a new “time window” algorithm for 1D pseudo-spectral sea-level models based on the normal mode method that enables users to define the temporal resolution at which the ice loading history is captured during different time intervals before the current simulation time. Utilizing the time window, we assign a fine temporal resolution $\textit{O}$ (10 0–2 years) for the period of ongoing and recent history of surface ice and ocean loading changes and a coarser temporal resolution $\textit{O}$ (10 3–6 years) for earlier periods in the simulation. This reduces the total CPU time and memory required per model time step while maintaining the precision of the model results. We explore the sensitivity of sea-level model results to the model temporal resolution and show how this sensitivity feeds back onto ice-sheet dynamics in coupled modelling. We apply the new algorithm to simulate sea-level changes in response to global ice-sheet evolution over two glacial cycles and the rapid collapse of marine sectors of the West Antarctic Ice Sheet in the coming centuries and provide appropriate time window profiles for each application. The time window algorithm reduces the total CPU time by ~ 50 % in each of these examples and changes the trend of the total CPU time increase from quadratic to linear. This improvement would increase with longer simulations than those considered here. Our algorithm also allows for coupling time intervals of annual temporal scale for coupled ice-sheet–sea-level modelling of regions such as West Antarctica that are characterized by rapid solid Earth response to ice changes due to the thin lithosphere and low mantle viscosities.

59 BASIC BIOLOGICAL SCIENCES↗

The role of föhn winds in eastern Antarctic Peninsula rapid ice shelf collapse

Ice shelf collapse reduces buttressing and enables grounded glaciers to contribute more rapidly to sea-level rise in a warming climate. The abrupt collapses of the Larsen A (1995) and B (2002) ice shelves on the Antarctic Peninsula (AP) occurred, at least for Larsen B, when long-period ocean swells damaged the calving front and the ice shelf was inundated with melt lakes that led to large-scale hydrofracture cascades. During collapse, field and satellite observations indicate föhn winds were present on both ice shelves. Here we use a regional climate model and machine learning analyses to evaluate the contributory roles of föhn winds and associated melt events prior to and during the collapses for ice shelves on the AP. Föhn winds caused about 25 % ± 3 % of the total annual melt in just 9 d on Larsen A prior to and during collapse and were present during the Larsen B collapse, which helped form extensive melt lakes. At the same time, the off-coast wind direction created by föhn winds helped melt and physically push sea ice away from the ice shelf calving fronts that allowed long-period ocean swells to reach and damage the front, which has been theorized to have ultimately triggered collapse. Collapsed ice shelves experienced enhanced surface melt driven by föhn winds over a large spatial extent and near the calving front, whereas SCAR inlet and the Larsen C ice shelves are affected less by föhn-wind-induced melt and do not experience large-scale melt ponds. These results suggest SCAR inlet and the Larsen C ice shelves may be less likely to experience rapid collapse due to föhn-driven melt so long as surface temperatures and föhn occurrence remain within historical bounds.

58 GEOSCIENCES↗

Energy Research and Forecasting (ERF) v1

ERF is a next-generation regional atmospheric modeling code for simulation mesoscale atmospheric flows. Its capabilities include the ability to model advection, diffusion, turbulence, terrain and moisture physics.

Almgren, Ann↗

WRF East River simulation Oct 2021 - Dec 2022

These are the Weather Research and Forecasting (WRF) regional climate model simulations for supporting the analysis of temperature, precipitation, and other hydroclimate variables and evaluating SAIL data. The WRF model has three nested domains centered at the SAIL location (East River, Colorado) for the SAIL period from Oct 01, 2021 to Dec 31, 2022. We used the BSU subgrid-scale physics schemes, CFSR meteorological forcing datasets, and the topographic shading radiation schemes in our WRF simulation. Detailed information on the model configuration can be found at https://doi.org/10.5194/egusphere-2022-437

54 ENVIRONMENTAL SCIENCES↗

The effect of grain boundaries on the resistivity of polycrystalline silicon

The electrical resistivity of polycrystalline silicon films was investigated. The films were grown by the chemical vapor decomposition of silane on oxidized silicon wafers. The resistivity was found to be independent of dopant atom concentration in the lightly doped regions but was a strong function of dopant levels in the more heavily doped regions. A model, based on high dopant atom segregation in the grain boundaries, is proposed to explain the results.

Fripp, A. L., Jr.↗

OAO-2 observations of the helium spectrum variable a Centauri

Ultraviolet photometry and spectrometer data are presented for a Cen, which exhibits large variations in the strength of its He I lines. The photometry indicates that the star becomes brighter at the helium-weak phase by 0.05 mag throughout the ultraviolet and visual region. A model atmosphere analysis indicates that the photometric variations are not due to flux redistribution from back-warming effects, but can be interpreted as due to the rotation of a distorted stellar disk in the shape of a prolate spheroid.

Molnar, M. R.↗

Observations and analysis of lunar radio emission at 3.09 mm wavelength

An analysis of data on lunar radio emission at 3.09 mm wavelength is presented. The data were obtained during a single lunation in a manner that facilitates their comparison with a calculated model. Specific regions of the moon (Copernicus, Sea of Serenity, Sea of Tranquillity, Ocean of Storms, and an highland region near the mean center) were studied with enough angular resolution to distinguish between different types of terrain. The data were absolutely calibrated and yield a new measurement of the lunation average brightness temperature of the center of the moon.

Ulich, B. L.↗

The total assessment profile, volume 2

Appendices are presented which include discussions of interest formulas, factors in regionalization, parametric modeling of discounted benefit-sacrifice streams, engineering economic calculations, and product innovation. For Volume 1, see .

Leininger, G.↗

A sensitivity analysis of regional and small watershed hydrologic models

Continuous simulation models of the hydrologic behavior of watersheds are important tools in several practical applications such as hydroelectric power planning, navigation, and flood control. Several recent studies have addressed the feasibility of using remote earth observations as sources of input data for hydrologic models. The objective of the study reported here was to determine how accurately remotely sensed measurements must be to provide inputs to hydrologic models of watersheds, within the tolerances needed for acceptably accurate synthesis of streamflow by the models. The study objective was achieved by performing a series of sensitivity analyses using continuous simulation models of three watersheds. The sensitivity analysis showed quantitatively how variations in each of 46 model inputs and parameters affect simulation accuracy with respect to five different performance indices.

Ambaruch, R.↗

A grid of model atmospheres for metal-deficient giant stars. I

A grid of flux-constant model atmospheres for stars with effective temperatures between 3750 and 6000 K, log g between 0.75 and 3.0, and (A/H) between -3.0 and 0.0 has been constructed. The line absorption is approximated by opacity distribution functions. Metal lines and molecular lines, including those from the infrared bands of CO and CN, are taken into account. The variation of the structure of the models with metal abundance and microturbulence parameter is found to be quite regular and not very drastic. The surface cooling produced by CO is important for all the models with a maximum temperature of 5000 K, while CN mainly causes a backwarming effect but is not very important for solar CNO abundances. The effects of convection, estimated by using the mixing-length approximation, are important only for the coldest models. The models compare very well with models from overlapping regions of other grids. A solar model consistent with the grid models is found to agree satisfactorily with empirical solar model atmospheres. The careful use of scaled solar models for stars with (A/H) approximately equal to zero is justified.

Gustafsson, B.↗

Contribution to polar albedo from a mesospheric aerosol layer

An examination is made of the impact of a layer of particulate matter, assumed to be ice crystals, on the albedo of the polar region. The model is time dependent, includes the growth of the layer, and incorporates the diffuse nature of radiation reflected from the surface and atmosphere. Although the magnitude of the effect is about an order of magnitude less than previous results, the impact is one of heating instead of cooling. It is also shown that ignoring the diffuse nature of the radiation reflected from the underlying earth-atmosphere system, as has been done in many previous simple models, can result in overestimation of the climatological impact of aerosols in sign and magnitude by a factor of up to 4-6.

Hummel, J. R.↗

Application of the AMI C sub l sub max prediction method to a number of airfoils

A method for calculating the flow about airfoils up to and beyond the stall is described. It is an iterative procedure between potential flow and boundary layer solutions. The separated region is modeled in the potential flow analysis using free vortex sheets which require an inner iteration to establish their shapes. The free vortex sheet length is an important parameter in the potential flow calculation. Results so far indicate a possible correlation between wake length and airfoil thickness/chord ratio. Calculated and experimental results are compared for a series of airfoils.

Dvorak, F. A.↗

Pressure and thermal distributions on wings and adjacent surfaces induced by elevon deflections at Mach 6

Surface pressure distributions and heat transfer distributions were obtained on wing half-models in regions where three dimensional separated flow effects are prominent. Unswept and 50 deg and 70 deg swept semispan wings were tested, for trailing-edge-elevon ramp angles of 0 deg, 10 deg, 20 deg, and 30 deg, with and without cylindrical and flat plate center bodies and with and without various wing-tip plates and fins. The data, obtained for a free stream Mach number of 6 and a wing-root-chord Reynolds number of 18.5 million, reveal considerably larger regions of increased pressure and thermal loads than would be anticipated using non-separated flow analyses.

Kaufman, L. G., II↗