SEARCH · Engineering Papers

Results for “range prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Properties of the Upper Tropospheres of Uranus and Neptune Derived from Observations at Visible to Near-Infrared Wavelengths

Photons at wavelengths between 0.3 and 4.5 microns penetrate the atmospheres of Uranus and Neptune to pressures between about 0.01 bar and 10 bars. This pressure range brackets the radiative convective boundary in both atmospheres and is therefore designated upper troposphere. Physical processes which govern the transfer of radiation in Uranus's and Neptune's atmospheres at these wavelengths include Rayleigh/Raman scattering by hydrogen, scattering and broadband absorption by suspended aerosol particles and absorption in discrete bands and lines by methane and hydrogen. Consequently, tropospheric properties constrained by observations at these wavelengths include optical properties and distribution of aerosol particles, methane/hydrogen ratio, and ortho/para hydrogen ratio. Recent observations of Uranus and Neptune in this spectral range, are reviewed and compared with predictions based on models of the atmospheric structures. Significant results for Uranus include the presence of an opaque lower boundary to the visible atmosphere very near the level corresponding to 2 bars pressure, and consequently a methane/hydrogen ratio no less than 3 percent.

Bergstralh, J. T.↗

NASA NTRS1987

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure was developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗

NASA NTRS1987

Experimental measurement of the dynamic pressure distribution in a squeeze film bearing damper executing circular centered orbits

A review of previous experimental measurements of squeeze film damper (SFD) forces is given. Measurements by the authors of SFD pressure fields and force coefficients, for circular centered orbits with epsilon = 0.5, are described and compared with computer predictions. For Reynolds numbers over the range 2-6, the effect of fluid inertia on the pressure fields and forces is found to be significant.

Sanandres, L. A.↗

NASA NTRS1987

Results of using the global positioning system to maintain the time and frequency synchronization in the Deep Space Network

There are two hydrogen maser clocks located at each signal processing center (SPC) in the DSN. Close coordination of the time and frequency of the SPC clocks is needed to navigate spacecraft to the outer planets. A recent example was the Voyager spacecraft's encounter with Uranus in January 1986. The clocks were adjusted with the goal of minimizing time and frequency offsets between the SPCs at encounter. How time and frequency at each SPC is estimated using data acquired from the Global Positioning System Timing Receivers operating on the NBS-BIH (National Bureau of Standards-Bureau International de l'Heure) tracking schedule is described. These data are combined with other available timing receiver data to calculate the time offset estimates. The adjustment of the clocks is described. It was determined that long range hydrogen maser drift is quite predictable and adjustable within limits. This enables one to minimize time and frequency differences between the three SPCs for many months by matching the drift rates of the three standards. Data acquisition and processing techniques using a Kalman filter to make estimates of time and frequency offsets between the clocks at the SPCs and UTC(NBS) (Coordinated Universal Time realized at NBS) are described.

Clements, P. A.↗

NASA NTRS1987

A method of predicting the energy-absorption capability of composite subfloor beams

A simple method of predicting the energy-absorption capability of composite subfloor beam structure has been developed. The method is based upon the weighted sum of the energy-absorption capability of constituent elements of a subfloor beam. An empirical data base of energy absorption results from circular and square cross section tube specimens were used in the prediction capability. The procedure is applicable to a wide range of subfloor beam structure. The procedure was demonstrated on three subfloor beam concepts. Agreement between test and prediction was within seven percent for all three cases.

Farley, Gary L.↗

NASA NTRS1986

Diffraction-limited performance of grazing incidence optical systems

Diffraction effects of X-ray optical systems are often (justifiably) ignored due to the small wavelength of the X-ray radiation. However, the extremely large obscuration ratio inherent to grazing incidence optical systems produces a profound degradation of the diffraction image over that produced by a moderately obscured aperture of the same diameter. The contradictory requirements of large collecting area and relatively short length of optical elements has tended to result in proposed designs containing many concentric shells with increasingly higher obscuration ratios. In this paper it is shown that diffraction effects in such systems can significantly affect the achievable optical performance at the low energy (long wavelength) end of the intended operating spectral range. Parametric diffraction-limited performance predictions for both imaging and spectrographic applications will be presented and compared to AXAF performance goals and/or BBXRT fabrication techniques.

Harvey, James E.↗

NASA NTRS1987

Measurement of the He II radiation field in planetary nebulae through Bowen fluorescence

Excitation of O III by He II is treated for sources over a useful range of densities to give accurate predictions of Bowen/non-Bowen line ratios. These are applied to recent observations of planetary nebulae to show that Bowen excitation increases monotonically with excitation class, and to deduce other important consequences.

Bhatia, A. K.↗

NASA NTRS1988

Constitutive modeling for isotropic materials

The third and fourth years of a 4-year research program, part of the NASA HOST Program, are described. The program goals were: (1) to develop and validate unified constitutive models for isotropic materials, and (2) to demonstrate their usefulness for structural analysis of hot section components of gas turbine engines. The unified models selected for development and evaluation were those of Bodner-Partom and of Walker. The unified approach for elastic-viscoplastic constitutive equations is a viable method for representing and predicting material response characteristics in the range where strain rate and temperature dependent inelastic deformations are experienced. This conclusion is reached by extensive comparison of model calculations against the experimental results of a test program of two high temperature Ni-base alloys, B1900+Hf and Mar-M247, over a wide temperature range for a variety of deformation and thermal histories including uniaxial, multiaxial, and thermomechanical loading paths. The applicability of the Bodner-Partom and the Walker models for structural applications has been demonstrated by implementing these models into the MARC finite element code and by performing a number of analyses including thermomechanical histories on components of hot sections of gas turbine engines and benchmark notch tensile specimens. The results of the 4-year program have been published in four annual reports. The results of the base program are summarized in this report. The tasks covered include: (1) development of material test procedures, (2) thermal history effects, and (3) verification of the constitutive model for an alternative material.

Chan, K. S.↗

NASA NTRS1988

Evaluation of the international reference ionosphere with the large AE-C and DE2 data bases

Empirical models such as the International Reference Ionosphere (IRI) are synthesized from large data bases. They can be viewed as analytical tools to facilitate accessing information stored in the data banks. However, in establishing the models, one has to apply smoothing and averaging procedures that in effect reduce the original information content. This study evaluates the agreement between the data base and the model at two opposite extremes of time resolution. Electron densities and temperatures in the altitude range of 300 to 400 km predicted by the IRI and measured by the AE-C and DE 2 satellites on the level of individual orbits as well as on the level of mission averages are compared. Whereas the averages show excellent agreement, the comparison for individual measurements indicates the limitations of empirical models.

Bilitza, D.↗

NASA NTRS1988

Dynamics of face and annular seals with two-phase flow

Hughes, William F.↗

NASA NTRS1988

Providing operational guidance for the development of sea breeze thunderstorms at the Kennedy Space Center - An experiment using a mesoscale numerical model

The effectiveness of a mesoscale numerical model to provide improved local forecast guidance is evaluated with respect to sea breeze convection storms at the Kennedy Space Center. The model and operational forecast guidance production are described. A case study is presented for sea breeze convection storms and lightning events on July 1, 1986. It is found that the mesoscale numerical model outperforms purely subjective predictions of sea breeze convection. The range of applications for the model are considered.

Lyons, Walter A.↗

NASA NTRS1989

Mg II line profiles of the Mira S Carinae

A series of high-dispersion IUE observations obtained to investigate the evolution of the shock structure of the Mira variable S Carinae have produced (despite limited phase coverage) a set of five exceptionally interesting spectra of the Mg II h and k lines. The two primary findings of these observations are (1) there is significant emission from both the h and k lines at positions corresponding to velocities of -150 km/s relative to the stellar photosphere and (2) the k/h flux ratio of the Mg II doublet remains below the theoretically predicted values which lie in the range 2:1 to 1:1 and shows a smooth dependence on the optical phase. Archival studies of other Miras (e.g., R Car) indicate that S Car is not unique in possessing unusual and highly variable Mg II h and k line profiles. Several possible physical processes that may explain these results, including radiative transfer effects in a shocked atmosphere, circumstellar scattering, and circumstellar absorption, are discussed.

Bookbinder, Jay A.↗

NASA NTRS1988

A hybrid-stress finite element for linear anisotropic elasticity

Standard assumed displacement finite elements with anisotropic material properties perform poorly in complex stress fields such as combined bending and shear and combined bending and torsion. A set of three dimensional hybrid-stress brick elements were developed with fully anisotropic material properties. Both eight-node and twenty-node bricks were developed based on the symmetry group theory of Punch and Atluri. An eight-node brick was also developed using complete polynomials and stress basis functions and reducing the order of the resulting stress parameter matrix by applying equilibrium constraints and stress compatibility constraints. Here the stress compatibility constraints must be formulated assuming anisotropic material properties. The performance of these elements was examined in numerical examples covering a broad range of stress distributions. The stress predictions show significant improvement over the assumed displacement elements but the calculation time is increased.

Fly, Gerald W.↗

NASA NTRS1989

Dynamics of face and annular seals with two-phase flow

A detailed study was made of face and annular seals under conditions where boiling, i.e., phase change of the leaking fluid, occurs within the seal. Many seals operate in this mode because of flashing due to pressure drop and/or heat input from frictional heating. High pressure, water pumps, industrial chemical pumps, and cryogenic pumps are mentioned as a few of many applications. The initial motivation was the LOX-GOX seals for the space shuttle main engine, but the study was expanded to include any face or annular seal where boiling occurs. Some of the distinctive behavior characteristics of two-phase seals were discussed, particularly their axial stability. While two-phase seals probably exhibit instability to disturbances of other degrees of freedom such as wobble, etc., under certain conditions, such analyses are too complex to be treated at present. Since an all liquid seal (with parallel faces) has a neutral axial stiffness curve, and is stabilized axially by convergent coning, other degrees of freedom stability analyses are necessary. However, the axial stability behavior of the two-phase seal is always a consideration no matter how well the seal is aligned and regardless of the speed. Hence, axial stability is thought of as the primary design consideration for two-phase seals and indeed the stability behavior under sub-cooling variations probably overshadows other concerns. The main thrust was the dynamic analysis of axial motion of two-phase face seals, principally the determination of axial stiffness, and the steady behavior of two-phase annular seals. The main conclusions are that seals with two-phase flow may be unstable if improperly balanced. Detailed theoretical analyses of low (laminar) and high (turbulent) leakage seals are presented along with computer codes, parametric studies, and in particular a simplified PC based code that allows for rapid performance prediction. A simplified combined computer code for the performance prediction over the laminar and turbulent ranges of a two-phase seal is described and documented. The analyses, results, and computer codes are summarized.

Hughes, William F.↗

NASA NTRS1991

Renormalization group analysis of anisotropic diffusion in turbulent shear flows

The renormalization group is applied to compute anisotropic corrections to the scalar eddy diffusivity representation of turbulent diffusion of a passive scalar. The corrections are linear in the mean velocity gradients. All model constants are computed theoretically. A form of the theory valid at arbitrary Reynolds number is derived. The theory applies only when convection of the velocity-scalar correlation can be neglected. A ratio of diffusivity components, found experimentally to have a nearly constant value in a variety of shear flows, is computed theoretically for flows in a certain state of equilibrium. The theoretical value is well within the fairly narrow range of experimentally observed values. Theoretical predictions of this diffusivity ratio are also compared with data from experiments and direct numerical simulations of homogeneous shear flows with constant velocity and scalar gradients.

Rubinstein, Robert↗

NASA NTRS1992

Engine panel seals for hypersonic engine applications: High temperature leakage assessments and flow modelling

A critical mechanical system in advanced hypersonic engines is the panel-edge seal system that seals gaps between the articulating horizontal engine panels and the adjacent engine splitter walls. Significant advancements in seal technology are required to meet the extreme demands placed on the seals, including the simultaneous requirements of low leakage, conformable, high temperature, high pressure, sliding operation. In this investigation, the seal concept design and development of two new seal classes that show promise of meeting these demands will be presented. These seals include the ceramic wafer seal and the braided ceramic rope seal. Presented are key elements of leakage flow models for each of these seal types. Flow models such as these help designers to predict performance-robbing parasitic losses past the seals, and estimate purge coolant flow rates. Comparisons are made between measured and predicted leakage rates over a wide range of engine simulated temperatures and pressures, showing good agreement.

Steinetz, Bruce M.↗

NASA NTRS1992

Ozone Response to Aircraft Emissions: Sensitivity Studies with Two-dimensional Models

Our first intercomparison/assessment of the effects of a proposed high-speed civil transport (HSCT) fleet on the stratosphere is presented. These model calculations should be considered more as sensitivity studies, primarily designed to serve the following purposes: (1) to allow for intercomparison of model predictions; (2) to focus on the range of fleet operations and engine specifications giving minimal environmental impact; and (3) to provide the basis for future assessment studies. The basic scenarios were chosen to be as realistic as possible, using the information available on anticipated developments in technology. They are not to be interpreted as a commitment or goal for environmental acceptability.

Ko, Malcolm K. W.↗

NASA NTRS1992

Pulsar gamma rays from polar cap regions

The production is studied of pulsar gamma rays by energetic electrons flowing in the open field region above pulsar polar caps. The propagation was followed of curvature radiation from primary electrons, as well as hard synchrotron radiation generated by secondary pairs, through the pulsar magnetosphere for vacuum dipole open field geometries. Using data from radio and optical observations, models were constructed for the specific geometries and viewing angles appropriate to particular pulsars. These detailed models produce normalized spectra above 10 MeV, pulse profiles, beaming fractions and phase resolved spectra appropriate for direct comparison with COS-B and GRO data. Models are given for the Crab, Vela, and other potentially detectable pulsars; general agreement with existing data is good, although perturbations to the simplified models are needed for close matches. The calculations were extended to the millisecond pulsar range, which allows the production of predictions for the flux and spectra of populations of recycled pulsars and search strategies are pointed out.

Chiang, James↗