Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Hyperon polarization in relativistic heavy ion collisions and axial U(1) symmetry breaking at high temperature

Experiments at the Relativistic Heavy Ion Collider have measured the net polarization of $\text{Λ}$ and $\bar{Λ}$ hyperons and attributed it to a coupling between their spin and the vorticity of the fluid created in heavy ion collisions, but how the spin comes to equilibrium with vorticity is an open problem. Recently, we found that vorticity fluctuations and helicity flip of strange quarks in quark-gluon plasma through perturbative QCD processes resulted in equilibration times far too long to be relevant. Here, we consider the Nambu-Jona-Lasinio model with the inclusion of the six-quark Kobayashi-Maskawa–'t Hooft interaction which breaks axial U(1). In this work, using instanton inspired models for the temperature dependence of the axial symmetry breaking, we find that constituent strange quarks can reach spin equilibrium at temperatures below about 170 MeV, just before they hadronize to form hyperons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Understanding and Mitigating the Contamination of Intrinsic poly-Si Gaps in Passivated IBC Solar Cells

We investigate factors that are critical for the performance of interdigitated back contact (IBC) solar cells based on polycrystalline silicon (poly-Si) passivated contacts. During patterning of doped lines using direct plasma deposition through a shadow mask, we show that the intrinsic poly-Si gap becomes contaminated with dopants, leading to shunting. Possible contamination mechanisms during masked deposition and high- temperature annealing are tested. Strategies developed to mitigate the contamination, such as reactive ion etching after deposition and amorphous to poly-Si crystallization in oxygen, will lead to improved IBC fabrication methods.

14 SOLAR ENERGY↗
DOE OSTI2024

Numerical Improvements in Magnetohydrodynamic, Pulsed Power Simulations of Near-Target Plasmas

Magnetohydrodynamic (MHD) simulations of pulsed power experiments frequently result in unphysical runaway heating when extended to low values of mass density. Traditionally, this has been addressed by the use of conductivity floors below which the plasma is given an arbitrarily low conductivity value. Here, a low-density treatment is presented that allows for low-density material to carry current while maintaining a stable temperature. This treatment is implemented in the Ares multiphysics code. Numerical modifications to the conventional vacuum treatment include an energy-conserving density floor, a modified averaging procedure to determine the thermal conductivity at the edge of adjacent zones, and a modified averaging procedure for determining the thermal conductivity in mixed zones that contain material from differing regions. Additionally, anomalous resistivity and Bohm diffusion models are implemented as simplified models for microphysics-induced enhancement of collisional transport. Importantly, the advantage of these various improvements are illustrated in a simple 1-D pulsed power target where the combined changes result in stable temperatures within the lower density regions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Research and Development to Reduce Impurity Production and Transport of the Impurities to the Target in Linear Plasma Devices Using Helicon Plasma Sources

Linear plasma devices used to test plasma facing materials (PFMs) and components for fusion reactors are often suffering under the production of intrinsic impurities from the plasma source system. Most linear plasma devices use internal electrodes (hollow cathodes, reflex arc, or cascading arc), which typically are the source of the main impurities. The next-generation plasma generators use radio frequency (RF) plasma sources like helicons to avoid internal electrodes. However, high power operation of helicons has proven to result in impurity production due to the high rectified sheath voltages created. Depending on the plasma parameters and magnetic configuration, these impurities can be transported to the target and deposited there to unacceptable high levels. Here, in this contribution, the experimental results from Proto-MPEX are summarized, and the conclusions of the impurity source physics are given. Methods to reduce the impurity production, the impurity transport, and the net deposition on the target are presented. These methods to reduce the impurity production include Faraday screens to reduce the sheath voltage drop, high-Z refractory coatings to reduce the erosion yield, and wall conditioning methods. Methods to reduce the impurity transport include changes in the magnetic configuration as well as electron heating to change axial and radial temperature profiles. Preliminary results on the effectiveness of some of these methods are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

First Wall Design of a Tokamak Pilot Plant Using a Monte Carlo Model for 3-D Heat Flux Deposition

We present a method for calculating the heat fluxes deposited on nonaxisymmetric tokamak first wall components, allowing for a first-of-its-kind model for power handling in the tokamak far scrape-off layer (SOL). The DIV3D Monte Carlo model features strict global power conservation and can calculate the finite cross-field plasma transport into magnetically-shadowed regions, which is significant when dealing with meter-scale shadows introduced by components such as poloidal limiters or antennas. As a case study, we apply the DIV3D model to inform the distribution of first wall poloidal limiters in an ARC-class reactor device. We demonstrate that discrete protection limiters can efficiently reduce peak heat fluxes on recessed breeder wall components in the presence of significant far-SOL plasma fluxes. By varying the toroidal periodicity and radial standoff depth of the limiters, we demonstrate one of the tradeoffs that must be considered in first wall design: more limiters provide greater protection, but at the cost of reduced breeding performance. We also present the impact that radial misalignments between limiters would have on first wall power loading.

Monte Carlo methods↗
DOE OSTI2022

Development of advanced machine learning models for analysis of plutonium surrogate optical emission spectra

This work investigates and applies machine learning paradigms seldom seen in analytical spectroscopy for quantification of gallium in cerium matrices via processing of laser-plasma spectra. Ensemble regressions, support vector machine regressions, Gaussian kernel regressions, and artificial neural network techniques are trained and tested on cerium-gallium pellet spectra. A thorough hyperparameter optimization experiment is conducted initially to determine the best design features for each model. The optimized models are evaluated for sensitivity and precision using the limit of detection (LoD) and root mean-squared error of prediction (RMSEP) metrics, respectively. Gaussian kernel regression yields the superlative predictive model with an RMSEP of 0.33% and an LoD of 0.015% for quantification of Ga in a Ce matrix. This study concludes that these machine learning methods could yield robust prediction models for rapid quality control analysis of plutonium alloys.

Rao, Ashwin P. (ORCID:0000000319312568)↗
DOE OSTI2026

Mapping Rydberg States of H 2 with the Halfium R-Matrix Method

In this article, we use the Halfium R-matrix method to investigate the Rydberg states of the H 2 molecule up to n = 20, filling the gap above the low-lying bound states already calculated with configuration interaction packages. Moreover, we show that the use of Quantum Defect Theory scaling laws, allows for a comprehensive analysis of the regular patterns resulting from the coupling between Rydberg series and doubly excited states. The results should open the door for more efficient quasi-diabatization of the potential energy curves which is required for calculating cross sections and rate coefficients of the (e + H 2 + ) collisional processes, involved in the plasma modeling for fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Size-Dependent Electrical Transport Properties in Conducting Diamond Nanostripes

With the advances in nanofabrication technology, horizontally aligned and well-defined nitrogen-doped ultrananocrystalline diamond nanostripes can be fabricated with widths in the order of tens of nanometers. The study of the size-dependent electron transport properties of these nanostructures is crucial to novel electronic and electrochemical applications. In this paper, 100 nm thick n-type ultrananocrystalline diamond thin films were synthesized by microwave plasma-enhanced chemical vapor deposition method with 5% N2 gas in the plasma during the growth process. Then the nanostripes were fabricated using standard electron beam lithography and reactive ion etching techniques. The electrical transport properties of the free-standing single nanostripes of different widths from 75 to 150 nm and lengths from 1 to 128 μm were investigated. The study showed that the electrical resistivity of the n-type ultrananocrystalline diamond nanostripes increased dramatically with the decrease in the nanostripe width. The nanostripe resistivity was nearly doubted when the width was reduced from 150 nm to 75 nm. The size-dependent variability in conductivity could originate from the imposed diffusive scattering of the nanostripe surfaces which had a further compounding effect to reinforce the grain boundary scattering.

Zhou, Andrew F. (ORCID:0000000243050409)↗
DOE OSTI2021

High-resolution Laboratory Measurements of K-shell X-Ray Line Polarization and Excitation Cross Sections in Helium-like S XV Ions

We report measurements of electron-impact excitation cross sections for the strong K-shell n = 2 → 1 transitions in S xv, using the LLNL EBIT-I electron beam ion trap, two crystal spectrometers, and the EBIT Calorimeter Spectrometer. The cross sections are determined by direct normalization to the well-known cross sections of radiative electron capture, measured simultaneously. Using contemporaneous polarization measurements with the two crystal spectrometers, whose dispersion planes are oriented parallel and perpendicular to the electron beam direction, the polarization of the direct excitation line emission is determined, and in turn the isotropic total cross sections are extracted. We further experimentally investigate various line-formation mechanisms, finding that radiative cascades and collisional inner-shell ionization dominate the degree of linear polarization and total line-emission cross sections of the forbidden line, z.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Information services for comparative analysis of biorhythm research

References and full text documents are presented in support of continuing research and research planning for the NASA behavioral physiology program. Areas covered include: (1) desynchronosis and performance; (2) effects of alcohol, common colds, drugs, and toxic hazards on performance; (3) effects of stress on rhythm of plasma steroids; (4) data processing of biological rhythms; (5) pharmacology and biological rhythms; (6) mechanisms of biological rhythms; and (7) development of biological rhythms.

Source record↗
NASA NTRS1973

Theory of solar microwave bursts

The theory of solar microwave bursts is discussed in terms of gyrosynchrotron emission and absorption in a magnetoactive plasma and other absorption processes by the background medium. Simplified formulas for all turnover frequencies are given. Above about 2 GHz the most likely absorption processes for large bursts are free-free absorption and gyrosynchrotron self-absorption. The former process is capable of producing flux densities which are flat or slowly varying functions of frequency. The latter process sets absolute upper limits on the intensities of microwave bursts, which at a given frequency, depend only on the magnetic field in the source region.

Ramaty, R.↗
NASA NTRS1974

Electromagnetic processes in the atmosphere of pulsars

The work consists of two parts. The first deals with the fine structure of radio pulses. Based on kinetic theory, processes occurring in the plasma shell of a pulsar when external electromagnetic radiation is present are investigated. It is shown that electromagnetic waves cause electrons to drift relative to ions, and initiate longitudinal oscillations. A dispersion equation describing the longitudinal oscillations in magnetized plasma is derived. Conditions for excitation of oscillations are found. Correlation functions of electron density are calculated, along with the coefficients of electromagnetic wave scattering. It is shown that variations in the amplitude of pulsar pulses are associated with scintillations caused by fluctuations in the plasma electron density. The second part of the study presents a mechanism for the radio emission of pulsars. The model of a rotating and a pulsating star, a neutron star with dipolar or more complex magnetic field, is examined.

Yukhimuk, A. K.↗
NASA NTRS1974

Low-energy auroral electrons

A measurement of the low-energy auroral electron flux distribution between 0.5 and 80 eV reveals structure between 0.5 and 10.0 eV. The structure is due to the thermal electron Maxwellian distribution and electron energy loss to thermal electrons, molecular nitrogen, and atomic oxygen. Some physical process in the auroral plasma causes the deduced loss function to differ from theory. Reasonable agreement is obtained between calculated and measured N2 second positive emission.

Sharp, W. E.↗
NASA NTRS1981

X-ray emission from supernova remnants near gamma-ray sources

It is noted that the imaging proportional of the Einstein Observatory has been used to search for X-ray emission from eight radio supernova remnants which are near three of the Cos-B unidentified gamma-ray sources: 2CG 311-01, CG 327-0, and CG 333+0. Emissions are observed from three of the remnants and upper limits on the remainder which are consistent with the luminosity expected from a simple blast-wave heated plasma model of the process. Thus none of the remnants are superluminous as might be expected if the pattern of the Crab Nebula were followed. It is thought that the remnant RCW 103 may be Vela-like. It is noted that another of the remnants, Kes 27, has centrally peaked X-ray emission which is unlike the shell-like emission seen for many remnants and which does not correlate well with its asymmetric radio emission.

Lamb, R. C.↗
NASA NTRS1981

Upstream waves and particles - An overview of ISEE results

A brief survey is presented of papers given at the Upstream Wave and Particle Workshop held at the Jet Propulsion Laboratory on April 15-16, 1980. Particular consideration is given to upstream energetic particles, upstream plasma waves, and acceleration processes. An attempt is made to view the solar wind-magnetosphere interaction as a general process and to state some of the obvious astrophysical implications.

Tsurutani, B. T.↗
NASA NTRS1981

X-ray spectroscopic observations and modeling of supernova remnants

The X-ray observations of young remnants and their theoretical interpretation are described. A number of questions concerning the nature of the blast wave interaction with the interstellar gas and grains and of atomic processes in these hot plasmas are considered. It is concluded that future X-ray spectrometers with high collecting area, moderate spectral resolution and good spatial resolution can make important contributions to the understanding of supernova remnants in the Milky Way and neighboring galaxies and of their role in the global chemical and dynamical evolution of the interstellar medium.

Shull, J. M.↗
NASA NTRS1983

Wave structure in the Venus ionosphere downstream of the terminator

In the lower ionosphere of Venus, just nightward of the terminator, instruments on the Pioneer Venus Orbiter have revealed nearly coherent wave trains in the electron density, N(e), temperature, T(e), and in the east-west component of the magnetic field, B(E). These waves exist primarily below 200 km. They have north-south wavelengths of the order of 150 km and amplitudes in N(e) and T(e) of about a factor of 2 or 3. B(E) has an amplitude of about 30 nT but no net value averaged over the waves. A unique phase relationship exists between these three parameters. N(e) and T(e) vary approximately inversely, suggesting that the waves represent vertical plasma motions. N(e) maxima and minima tend to occur at zero crossings of B(E), i.e., within regions of vertical current. The wave energy is believed to be derived from the steep plasma pressure gradient at the terminator which accelerates ionospheric plasma nightward. The generation process is unknown, but it may involve gradient driven interchange instabilities, or shear instabilities produced by ion-neutral drag at lower altitudes. Whatever their origin, the waves are important because they represent an energy sink for the transterminator flow that is largely responsible for the maintenance of the nightside ionosphere.

Brace, L. H.↗