Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “passive sensor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Climate Variability during the TRMM Era: Relationships between TRMM Precipitation and Upper-Tropospheric Hydrometeors

Tropical rainfall as seen by the TRMM radar has multiple scales of organization, one prominent example of which is mesoscale deep convection that supports the production of strong, widespread anvil systems important to the planet's water and energy balance. TRMM PR precipitation retrievals (i.e. the 2A25 algorithm) are reliable down to rates below 1.0 mm/h which captures the majority of near-surface rainfall. However, much of the precipitating hydrometeor mass above the freezing level in these anvil systems may be associated with particles where TRMM PR s/n is low. In out analysis we are examining the question of 'What portions of the total hydrometeor spectrum can we see individually with TRMM, CloudSat, high frequency passive microwave (e.g. AMSU-B, MHS) and MODIS'. This will allow us to pursue fundamental issues of precipitation, efficiency, maintenance of upper-troposheric humidity, and cloud forcing variability in the tropical climate system. We do this by generating frequency distributions of ice water content (IWC), integrated IWC (IWP), and precipitation as appropriate for these sensors and relate these to TRMM near-surface rainfall. Joint frequency distributions are developed from more limited coincidence between TRMM and these sensors. We interpret these results in terms of a climate regime descriptor and as an index of precipitation efficiency for tropical rain systems.

Robertson, Franklin↗
NASA NTRS2012

Advances in Assimilation of Satellite-Based Passive Microwave Observations for Soil-Moisture Estimation

Satellite-based microwave measurements have long shown potential to provide global information about soil moisture. The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS, [1]) mission as well as the future National Aeronautics and Space Administration (NASA) Soil Moisture Active and Passive (SMAP, [2]) mission measure passive microwave emission at L-band frequencies, at a relatively coarse (40 km) spatial resolution. In addition, SMAP will measure active microwave signals at a higher spatial resolution (3 km). These new L-band missions have a greater sensing depth (of -5cm) compared with past and present C- and X-band microwave sensors. ESA currently also disseminates retrievals of SMOS surface soil moisture that are derived from SMOS brightness temperature observations and ancillary data. In this research, we address two major challenges with the assimilation of recent/future satellite-based microwave measurements: (i) assimilation of soil moisture retrievals versus brightness temperatures for surface and root-zone soil moisture estimation and (ii) scale-mismatches between satellite observations, models and in situ validation data.

De Lannoy, Gabrielle J. M.↗
NASA NTRS2018

Using the Hottest Particles in the Universe to Probe Icy Solar System Worlds

We present results of our Phase 1 NIAC Study to determine the feasibility of developing a competitive, low cost, low power, low mass passive instrument to measure ice depth on outer planet ice moons, such as Europa, Ganymede, Callisto, and Enceladus. Indirect measurements indicate that liquid water oceans are likely present beneath the icy shells of such moons (see e.g.,the JPL press release "The Solar System and Beyond is Awash in Water"), which has important astrobiological implications. Determining the thickness of these ice shells is challenging given spacecraft SWaP (Size, Weight and Power) resources. The current approach uses a suite of instruments, including a high power, massive ice penetrating radar. The instrument under study, called PRIDE (Passive Radio Ice Depth Experiment) exploits a remarkable confluence between methods from the high energy particle physics and the search for extraterrestrial life within the solar system. PRIDE is a passive receiver of a naturally occurring radio frequency (RF) signal generated by interactions of deep penetrating Extremely High Energy (> 10^18 eV) cosmic ray neutrinos. It could measure ice thickness directly, and at a significant savings to spacecraft resources. At RF frequencies the transparency of modeled Europan ice is up to many km, so an RF sensor in orbit can observe neutrino interactions to great depths, and thereby probe the thickness of the ice layer.

Exploration↗
DOE OSTI2021

Voltage Estimation in Low-Voltage Distribution Grids with Distributed Energy Resources

Present distribution grids generally have limited sensing capabilities and are therefore characterized by low observability. Improved observability is a prerequisite for increasing the hosting capacity of distributed energy resources such as solar photovoltaics (PV) in distribution grids. In this context, this paper presents learning-aided low-voltage estimation using untapped but readily available and widely distributed sensors from cable television (CATV) networks. The cable broadband sensors offer timely local voltage magnitude sensing with 5-minute resolution and can provide an order of magnitude more data on the time-varying state of a secondary distribution system than currently deployed utility sensors. The proposed solution incorporates voltage readings from neighboring CATV sensors, taking into account spatio-temporal aspects of the observations, and estimates single-phase voltage magnitudes at all non-monitored low-voltage buses using random forests. The effectiveness of the proposed approach was demonstrated using a multi-phase 1572-bus feeder from the SMART-DS data set for two case studies passive distribution feeder (without PV) and active distribution feeder (with PV). The analysis was conducted on simulated data, and the results show voltage estimates with a high degree of accuracy, even at extremely low percentages of observable nodes.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1981

Remote sensing of high-latitude ionization profiles by ground-based and spaceborne instrumentation

Ionospheric specification and modeling are now largely based on data provided by active remote sensing with radiowave techniques (ionosondes, incoherent-scatter radars, and satellite beacons). More recently, passive remote sensing techniques have been developed that can be used to monitor quantitatively the spatial distribution of high-latitude E-region ionization. These passive methods depend on the measurement, or inference, of the energy distribution of precipitating kilovolt electrons, the principal source of the nighttime E-region at high latitudes. To validate these techniques, coordinated measurements of the auroral ionosphere have been made with the Chatanika incoherent-scatter radar and a variety of ground-based and spaceborne sensors

Vondrak, R. R.↗
NASA NTRS2001

Structural Damage Detection Using Virtual Passive Controllers

This paper presents novel approaches for structural damage detection which uses the virtual passive controllers attached to structures, where passive controllers are energy dissipative devices and thus guarantee the closed-loop stability. The use of the identified parameters of various closed-loop systems can solve the problem that reliable identified parameters, such as natural frequencies of the open-loop system may not provide enough information for damage detection. Only a small number of sensors are required for the proposed approaches. The identified natural frequencies, which are generally much less sensitive to noise and more reliable than the identified natural frequencies, are used for damage detection. Two damage detection techniques are presented. One technique is based on the structures with direct output feedback controllers while the other technique uses the second-order dynamic feedback controllers. A least-squares technique, which is based on the sensitivity of natural frequencies to damage variables, is used for accurately identifying the damage variables.

Lew, Jiann-Shiun↗
NASA NTRS2019

Two Decades Observing Smoke Above Clouds in the South-Eastern Atlantic Ocean: Deep Blue Algorithm Updates and Validation with ORACLES Field Campaign Data

This study presents and evaluates an updated algorithmfor quantification of absorbing aerosols above clouds(AACs) from passive satellite measurements. The focus isbiomass burning in the south-eastern Atlantic Ocean duringthe 2016 and 2017 ObseRvations of Aerosols above CLoudsand their intEractionS (ORACLES) field campaign deployments.The algorithm retrieves the above-cloud aerosoloptical depth (AOD) and underlying liquid cloud opticaldepth and is applied to measurements from the Sea-viewingWide Field-of-view Sensor (SeaWiFS), Moderate ResolutionImaging Spectroradiometer (MODIS), and Visible InfraredImaging Radiometer Suite (VIIRS) from 1997 to 2017. AirborneNASA Ames Spectrometers for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) and NASA LangleyHigh Spectral Resolution Lidar 2 (HSRL2) data collectedduring ORACLES provide important validation for spectralAOD for MODIS and VIIRS; as the SeaWiFS missionended in 2010, it cannot be evaluated directly. The 4STARand HSRL2 comparisons are complementary and reveal performancegenerally in line with uncertainty estimates providedby the optimal estimation retrieval framework used. Atpresent the two MODIS-based data records seem the mostreliable, although there are differences between the deployments,which may indicate that the available data are not yetsufficient to provide a robust regional validation. Spatiotemporalpatterns in the data sets are similar, and the time seriesare very strongly correlated with each other (correlationcoefficients from 0.95 to 0.99). Offsets between the satellitedata sets are thought to be chiefly due to differences in absolutecalibration between the sensors. The available validationdata for this type of algorithm are limited to a small numberof field campaigns, and it is strongly recommended that suchairborne measurements continue to be made, both over thesouthern Atlantic Ocean and elsewhere.

Sayer, Andrew M.↗
NASA NTRS1982

Passive microwave remote sensing of the earth from space - A review

A brief discussion of the historical development of microwave radiometry from space is provided, followed by a review of radiometer system concepts as applied to spacecraft platforms. One of the earliest meteorological applications of spaceborne radiometry was in global atmospheric temperature sounding. Surface-sensing applications can be divided into three main categories, including ocean, ice, and land. A radiometer system description is presented, and spacecraft considerations are discussed. Spaceborne radiometric sensors are examined, taking into account the Nimbus-5 Microwave Spectrometer, the Electrically Scanning Microwave Radiometer, the Skylab microwave radiometer/scatterometer and altimeter instrument, S-194 on Skylab, the Scanning Microwave Spectrometer on Nimbus 6, the Scanning Multichannel Microwave Radiometer on Seasat and Nimbus 7, Soviet sensors, and an Indian microwave radiometer.

Njoku, E. G.↗
NASA NTRS2004

Comparisons of Arctic In-Situ Snow and Ice Data with Airborne Passive Microwave Measurements

As part of the AMSR-E sea ice validation campaign in March 2003, aircraft flights over the Arctic sea ice were coordinated with ground measurements of snow and sea ice properties. The surface-based measurements were in the vicinity of Barrow, AK, and at a Navy ice camp located in the Beaufort Sea. The NASA P-3 aircraft was equipped with the NOAA ETL PSR microwave radiometer that has the same frequencies as the AMSR-E sensor. The goal was to validate the standard AMSR-E products ice temperature and snow depth on sea ice. Ground measurements are the only way to validate these parameters. The higher spatial resolution of the PSR instrument (between 30 and 500 m, depending on altitude) enables a better comparison between ground measurements and microwave data because of the expected smaller spatial variability. Maps of PSR data can then be used for further down-scaling to AMSR-E pixel areas. Initial results show a good qualitative agreement between the in-situ snow depths and the PSR data. Detailed studies are underway and latest results will be presented.

Markus, T.↗
DOE OSTI2023

Snapshot multispectral imaging using a diffractive optical network

Abstract Multispectral imaging has been used for numerous applications in e.g., environmental monitoring, aerospace, defense, and biomedicine. Here, we present a diffractive optical network-based multispectral imaging system trained using deep learning to create a virtual spectral filter array at the output image field-of-view. This diffractive multispectral imager performs spatially-coherent imaging over a large spectrum, and at the same time, routes a pre-determined set of spectral channels onto an array of pixels at the output plane, converting a monochrome focal-plane array or image sensor into a multispectral imaging device without any spectral filters or image recovery algorithms. Furthermore, the spectral responsivity of this diffractive multispectral imager is not sensitive to input polarization states. Through numerical simulations, we present different diffractive network designs that achieve snapshot multispectral imaging with 4, 9 and 16 unique spectral bands within the visible spectrum, based on passive spatially-structured diffractive surfaces, with a compact design that axially spans ~72 λ m , where λ m is the mean wavelength of the spectral band of interest. Moreover, we experimentally demonstrate a diffractive multispectral imager based on a 3D-printed diffractive network that creates at its output image plane a spatially repeating virtual spectral filter array with 2 × 2 = 4 unique bands at terahertz spectrum. Due to their compact form factor and computation-free, power-efficient and polarization-insensitive forward operation, diffractive multispectral imagers can be transformative for various imaging and sensing applications and be used at different parts of the electromagnetic spectrum where high-density and wide-area multispectral pixel arrays are not widely available.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Contributions of TRMM and GPM to GEOSS

Two international satellite missions have a major role in the development of global precipitation data under the auspices of the Global Earth Observation System of Systems (GEOSS) to meet the needs of several Societal Benefit Areas set forth by the Group on Earth Observations (GEO). One is the joint U.S.-Japan Tropical Rainfall Measuring Mission (TRMM), launched in 1997, which provides combined radar/radiometer measurements to serve as a benchmark for tropical precipitation measurements by passive microwave radiometers and has played a key role in the development of the current generation of multi-satellite global rainfall products. The other is the Global Precipitation Measurement (GPM) Mission, an international satellite mission to be launched in 2013 to deliver the next-generation global precipitation observations from a constellation of dedicated and operational microwave sensors. GPM is a science mission with integrated applications goals aimed at (1) advancing the knowledge of the global water/energy cycle variability and freshwater availability and (2) improving weather, climate, and hydrological prediction capabilities through more accurate and frequent measurements of global precipitation. The GPM Mission is currently a partnership between NASA and the Japan Aerospace Exploration Agency (JAXA), with additional partners in satellite constellation and ground validation under discussion. With NASA and JAXA science team activities providing the framework and infrastructures for international collaboration on satellite inter-calibration, retrieval algorithm development, and ground validation, GPM has been identified as the cornerstone for the development of the Precipitation Constellation for the Committee on Earth Observation Satellites (CEOS). An overview of current accomplishments by TRMM and anticipated contributions by GPM to GEOSS activities will be presented.

Hou, Arthur Y.↗
NASA NTRS2015

Design and Development of VHF Antennas for Space Borne Signal of Opportunity Receivers for Cubesat Platforms

Design and Development of VHF Antennas for Space Borne Signal of Opportunity Receivers for Cubesat Platforms. Space borne microwave remote sensors at VHF/UHF frequencies are important instruments to observe reflective properties of land surfaces through thick and heavy forestation on a global scale. One of the most cost effective ways of measuring land reflectivity at VHF/UHF frequencies is to use signals transmitted by existing communication satellites (operating at VHF/UHF band) as a signal of opportunity (SoOp) signal and passive receivers integrated with airborne/space borne platforms operating in the Low Earth Orbit (LEO). One of the critical components of the passive receiver is two antennas (one to receive only direct signal and other to receive only reflected signal) which need to have ideally high (>30dB) isolation. However, because of small size of host platforms and broad beam width of dipole antennas, achieving adequate isolation between two channels is a challenging problem and need to be solved for successful implementation of space borne SoOp technology for remote sensing. In this presentation a novel enabling VHF antenna technology for Cubesat platforms is presented to receive direct as well as reflected signal with needed isolation. The novel scheme also allows enhancing the gain of individual channels by factor of 2 without use of reflecting ground plane

Crossed Dipole Antennas↗
NASA NTRS2017

Open-Loop Flight Testing of COBALT GN&C Technologies for Precise Soft Landing

A terrestrial, open-loop (OL) flight test campaign of the NASA COBALT (CoOperative Blending of Autonomous Landing Technologies) platform was conducted onboard the Masten Xodiac suborbital rocket testbed, with support through the NASA Advanced Exploration Systems (AES), Game Changing Development (GCD), and Flight Opportunities (FO) Programs. The COBALT platform integrates NASA Guidance, Navigation and Control (GN&C) sensing technologies for autonomous, precise soft landing, including the Navigation Doppler Lidar (NDL) velocity and range sensor and the Lander Vision System (LVS) Terrain Relative Navigation (TRN) system. A specialized navigation filter running onboard COBALT fuzes the NDL and LVS data in real time to produce a precise navigation solution that is independent of the Global Positioning System (GPS) and suitable for future, autonomous planetary landing systems. The OL campaign tested COBALT as a passive payload, with COBALT data collection and filter execution, but with the Xodiac vehicle Guidance and Control (G&C) loops closed on a Masten GPS-based navigation solution. The OL test was performed as a risk reduction activity in preparation for an upcoming 2017 closed-loop (CL) flight campaign in which Xodiac G&C will act on the COBALT navigation solution and the GPS-based navigation will serve only as a backup monitor.

Carson, John M., III↗
NASA NTRS2017

Design VHF Antennas for Space Borne Receivers for SmallSats

Space borne microwave remote sensors at VHF/UHF frequencies are important instruments to observe reflective properties of land surfaces through thick and heavy forestation on a global scale. One of the most cost effective ways of measuring land reflectivity at VHF/UHF frequencies is to use signals transmitted by existing communication satellites (operating at VHF/UHF band) as a signal of opportunity (SoOp) signal and passive receivers integrated with airborne/space borne platforms operating in the Low Earth Orbit (LEO). One of the critical components of the passive receiver is two antennas (one to receive only direct signal and other to receive only reflected signal) which need to have ideally high (>30dB) isolation. However, because of small size of host platforms and broad beam width of dipole antennas, achieving adequate isolation between two channels is a challenging problem and need to be solved for successful implementation of space borne SoOp technology for remote sensing. In this presentation a novel enabling VHF antenna technology for Cubesat platforms is presented to receive direct as well as reflected signal with needed isolation. The novel scheme also allows enhancing the gain of individual channels by factor of 2 without use of reflecting ground plane.

Antennas↗
NASA NTRS2018

Two-Dimensional Planetary Surface Landers

We proposed to develop a new landing approach that significantly reduces development time and obviates the most complicated, most expensive, and highest-risk phase of a landing mission. The concept is a blanket- or carpet-like two-dimensional (2D) lander (~1-m × 1-m surface area and <1-cm thick) with a low mass/drag ratio, which allows the lander to efficiently shed its approach velocity and provide a more robust structure for landing integrity. The form factor of these landers allows dozens to be stacked on a single spacecraft for transport and distributed en masse to the surface. Lander surfaces will be populated on both sides by surface-mount, low-profile sensors and instruments, surface-mount telecom, solar cells, batteries, processors, and memory. Landers will also incorporate thin flexible electronics, made possible in part by printable electronics technology. The mass and size of these highly capable technologies further reduces the required stiffness and mass of the lander structures to the point that compliant, lightweight, robust landers capable of passive landings are possible. This capability avoids the costly, complex use of rockets, radar, and associated structure and control systems. This approach is expected to provide an unprecedented science payload mass to spacecraft mass ratio of approximately 80% (estimated based on current knowledge). This compared to ~1% for Pathfinder, ~17% for MER, and 22% for MSL rovers. Clearly, one difference is rovers vs. a lower capability lander. An outcome of the Phase I study is a clear roadmap for near-term demonstration and long-term technology development.

Landers↗
DOE OSTI2020

Analysis of Microseismicity and Reactivated Fault Size to Assess the Potential for Felt Events by CO 2 Injection in the Illinois Basin

The results of monitoring of carbon dioxide (CO 2 ) injection at the Illinois Basin—Decatur Project (IBDP) and the companion Illinois Industrial Carbon Capture and Sequestration Sources (IL-ICCS) project—have shown that reservoir response to fluid pressure changes can vary significantly at different injection locations within the same reservoir. Predrill reservoir characterization is important to identify potentially seismogenic faults. However, interpretations of newly reprocessed 3D seismic reflection data illustrate the challenges related to their identification in a region dominated by faulting with small vertical offsets. Faults interpreted in the 3D seismic volume range from ~300 to 1200 m wide and are in the same size range as faults that could have been the source of historical events up to Mw 2.7 in central Illinois. The array of monitoring sensors that was installed for the IBDP continues to collect data, as injection operates in IL-ICCS, the second injection well. CO 2 injection rates for the IL-ICCS well are on average 1.7 times the rates injected in the IBDP well, but a significantly reduced rate of induced seismicity is observed. This article presents results of passive seismic monitoring for the duration of the project to date, integrating active and passive seismic data to develop a new interpretation of the subsurface structure at the Decatur site that explicitly identifies pathways for fluid flow into the basement leading to induced seismicity, and provides a geological explanation for the sharp reduction of induced seismicity during injection at higher rates into the second well. The use of seismic moment to estimate the length of seismogenic slip planes in the local subsurface suggests that faults large enough to produce felt seismicity are unlikely to be present at or near the Decatur site.

Geochemistry & Geophysics↗
NASA NTRS1984

Remote sensing of soil moisture

Four major objectives are proposed: (1) to study the sensitivity of active and passive microwave remote sensing approaches to soil moisture variations; (2) to investigate the effect of vegetation cover on microwave backscatter and emission; (3) to test theoretical models of microwave backscatter and emission from a natural terrain against the observations obtained from SIR-B and aircraft radiometer flights; and (4) to estimate vegetation biomass with airborne visible and infrared sensors.

Wang, J. R.↗
NASA NTRS1986

Inversion of SAGE II measurements

Stratospheric aerosol data acquired by the seven channels of the SAGE II passive radiometer system are first converted to atmospheric slant path transmission (SPT) values before deriving inversion values. The sun-pointing configuration permits bypassing calibration equipment required by other instruments and also furnishes high resolution vertical profile data. The retrieval techniques for quantifying the amounts of aerosol, water vapor, NO2 and O3, the species to which the SAGE II sensors are tuned, are summarized, along with methods for estimating the uncertainty in the calculations.

Chu, W. P.↗