Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orbital order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Space transportation and destination considerations for extraterrestrial disposal of radioactive waste

A feasibility study is summarized of extraterrestrial (space) disposal of radioactive waste. The initial work on the evaluation and comparison of possible space destinations and launch vehicles is reported. Only current or planned space transportation systems were considered. The currently planned space shuttle was found to be more cost effective than current expendable launch vehicles, by about a factor of two. The space shuttle will require a third stage to perform the disposal missions. Depending on the particular mission this could be either a reusable space tug or an expendable stage such as a Centaur. Of the destinations considered, high earth orbits (between geostationary and lunar orbit altitudes), solar orbits (such as a 0.90 AU circular solar orbit) or a direct injection to solar system escape appear to be the best candidates. Both earth orbits and solar orbits have uncertainties regarding orbit stability and waste package integrity for times on the order of a million years.

Zimmerman, A. V.↗
NASA NTRS1973

Overall evaluation of ERTS-1 imagery for cartographic application

The author has identified the following significant results. Scientific results may be summarized as follows: (1) A geodetic (UTM) grid can be fitted to MSS bulk images with a positional accuracy in the order of 50 meters (rms). (2) The MSS imagery as corrected and printed in bulk form is in effect or a defined map projection. This projection, if optimized for cartographic presentation, will have distortions in the order of only 1 part in 10,000. (3) The orbit of ERTS-1 and image delineation of MSS imagery can be held by NASA so that predesignated scenes may be identified and used as a basis for a map series. This concept could reduce the time and cost of ERTS-1 image map production many fold as compared to standard quadrangle format production.

Colvocoresses, A. P.↗
NASA NTRS1981

Electromagnetic deep-probing (100-1000 kms) of the Earth's interior from artificial satellites: Constraints on the regional emplacement of crustal resources

A spherical harmonic analysis program is being tested which takes magnetic data in universal time from a set of arbitrarily space observatories and calculates a value for the instantaneous magnetic field at any point on the globe. The calculation is done as a least mean-squares value fit to a set of spherical harmonics up to any desired order. The program accepts as a set of input the orbit position of a satellite coordinates it with ground-based magnetic data for a given time. The output is a predicted time series for the magnetic field on the Earth's surface at the (r, theta) position directly under the hypothetically orbiting satellite for the duration of the time period of the input data set. By tracking the surface magnetic field beneath the satellite, narrow-band averages crosspowers between the spatially coordinated satellite and the ground-based data sets are computed. These crosspowers are used to calculate field transfer coefficients with minimum noise distortion. The application of this technique to calculating the vector response function W is discussed.

Hermance, J. F.↗
NASA NTRS1981

Feasibility study for long lifetime helium dewar

A feasible concept for a launchable three year lifetime helium dewar was investigted. Current helium dewar designs were examined to see where the largest potential reductions in parasitic heat loads can be made. The study was also devoted to examining support concepts. The support concept chosen, a passive orbital disconnect strut (PODS), has an orbital support conductance that is lower by more than an order of magnitude over current tension band supports. This lower support conductance cuts the total dewar weight in half for the same three year life time requirements. Effort was also concentrated on efficient wire feed through designs and vapor cooling of the multilayer insulation, supports, wire feed throughs and plumbing penetrations. A single stage helium dewar vs. dual stage dewars with a guard cryogen of nitrogen or neon was examined. The single stage dewar concept was selected. Different support concepts were analyzed from which the PODS support concepts was chosen. A preliminary design of the dewar was thermally and structurally analyzed and laid out including system weights, thermal performance and performance sensitivities.

Parmley, R. T.↗
NASA NTRS1982

Scale-free models of galaxies. II - A complete survey of orbits

A complete set of orbits starting at over 400 distinct points spread out in the phase space of an oblate scale-free potential is investigated. Each orbit is followed for a time that corresponds to a Hubble time in a realistic galaxy potential suitable for an E5 or E6 galaxy. It is noted that none of the orbits in the survey is ergodic. All of the survey orbits are regular, visiting a region at least one dimension smaller than expected from the classical integrals of motion. Thus, for all practical purposes, they have an extra nonclassical isolating integral. Approximately 95% of the survey orbits are box orbits, the rest being pipes (formerly tubes). The survey exposes an ambiguity in the original classification scheme for orbits, which, it is noted, can be resolved on the basis of the topology of an orbit's surface of section. Nevertheless, the distinction between high order very convoluted pipes and boxes is probably artificial for practical purposes.

Richstone, D. O.↗
NASA NTRS1980

LANDSAT-D refurbishment study

Requirements for refurbishing the LANDSAT-D spacecraft after its recovery from orbit at the end of a 3-year mission in order to reuse the spacecraft on a second 3-year mission were studied. A schedule of the time required for the refurbishment including the procurement cycle for long lead-time items is developed. The costs of refurbishing and of procuring an entirely new LANDSAT-D spacecraft are compared.

Source record↗
NASA NTRS1982

Crustal interpretation of the MAGSAT data in the continental United States

The processing of MAGSAT scalar data to construct a crustal magnetic anomaly map over the continental U.S. involves removal of the reference field model, a path-by-path subtraction of a low order polynomial through a least-squares fit to reduce orbital offset errors, and a two dimensional spectral filtering to mitigate the spectral bias induced by the path-by-path orbital correction scheme. The resultant anomaly map shows reasonably good correlations with an aeromagnetic map derived from the project MAGNET. Prominent satellite magnetic anomalies are identified in terms of geological provinces and age boundaries. An inversion method was applied to MAGSAT data which produces both the Curie depth topography and laterally varying magnetic susceptibility of the crust. A contoured Curie depth map thus derived shows general agreements with a crustal thickness map based on seismic data.

Won, I. J.↗
NASA NTRS1984

A review of micrometeoroid flux measurements and models for low orbital altitudes of the Space Station

A review of meteoroid flux measurements and models for low orbital altitudes of the Space Station has been made in order to provide information that may be useful in design studies and laboratory hypervelocity impact tests which simulate micrometeoroids in space for design of the main wall of the Space Station. This report deals with the meteoroid flux mass model, the defocusing and shielding factors that affect the model, the probability of meteoroid penetration of the main wall of a Space Station. Whipple (1947) suggested a meteoroid bumper, a thin shield around the spacecraft at some distance from the wall, as an effective device for reducing penetration, which has been discussed in this report. The equations of the probability of meteoroid penetration, the average annual cumulative total flux, and the equations for the thickness of the main wall and the bumper are presented in this report.

Susko, M.↗
NASA NTRS1982

Space Shuttle Wireless Crew Communications

The design, development, and performance characteristics of the Space Shuttle's Wireless Crew Communications System are discussed. This system allows Space Shuttle crews to interface with the onboard audio distribution system without the need for communications umbilicals, and has been designed through the adaptation of commercially available hardware in order to minimize development time. Testing aboard the Space Shuttle Orbiter Columbia has revealed no failures or design deficiencies.

Armstrong, R. W.↗
NASA NTRS1990

A simple analytic model for the evolution of captured galactic disks

The general analytic solution developed by Steinman-Cameron and Durisen and published in 1988 for the evolution of dissipative nonplanar disks is applied to captured galactic disks in model galaxies with nonspherical, scale-free, logarithmic gravitational potentials. Such potentials produce flat rotation curves, similar to those seen in real galaxies. In this case, the analytic solution yields a self-similar structure for the warps and twists that develop while the disks is settling. Being scale-free in a simple, analytic form, this solution is completely defined by only a few dimensionless fitting parameters. As a result, it can be utilized as a mathematical tool to fit settling disks in real galaxies. The minimum time it takes for a disk to settle into a steady state orientation is also a scale-free quantity when expressed in units of the precession period or the orbit period. For realistic parameters, settling times are on the order of one-half to two periods. The use of the time-dependent structure of settling disks as a probe of the three-dimensional mass distribution of the host galaxies, including dark halos, is discussed.

Steiman-Cameron, Thomas Y.↗
NASA NTRS1991

IDE spatio-temporal impact fluxes and high time-resolution studies of multi-impact events and long-lived debris clouds

During the first 12 months of the Long Duration Exposure Facility (LDEF) mission, the Interplanetary Dust Experiment (IDE) recorded over 15,000 total impacts on six orthogonal faces with a time resolution on the order of 15 to 20 seconds. When combined with the orbital data and the stabilized configuration of the spacecraft, this permits a detailed analysis of the micro-particulate environment. The functional status of each of the 459 detectors was monitored every 2.4 hours, and post-flight analyses of these data has now permitted an evaluation of the effective active detection area as a function of time, panel by panel and separately for the two sensitivity levels. Thus, total impacts were transformed into areal fluxes, and are presented here for the first time. Also discussed are possible effects of these fluxes on previously announced results: apparent debris events, meteor stream detections, and beta meteoroids in observationally significant numbers.

Mulholland, J. Derral↗
NASA NTRS1991

Periodic gravitational perturbations for conversion between osculating and mean orbit elements

Algorithms for converting between osculating and mean orbit elements are currently limited to computing the contribution due to the second zonal harmonic (J2). This paper presents an improved conversion algorithm that includes the effects of all zonal, sectorial and tesseral harmonics, second order J2, and third-body gravitational perturbations. Mean elements are useful for preliminary orbit and maneuver design; however, for more precise work, such as groundtrack targeting, osculating elements are required. This improved conversion algorithm was developed to meet accuracy requirements for the TOPEX/Poseidon mission; but, additional use can be considered for satellites orbiting planets like Venus that do not have a dominant J2. Results are presented from tests performed using the new algorithm with the planned TOPEX/Poseidon earth orbit as well as the Mars Observer and proposed circular Magellan (Venus) orbits.

Guinn, Joseph R.↗
NASA NTRS1991

Status of the Stellar X-Ray Polarimeter for the Spectrum-X-Gamma mission

The Stellar X-Ray Polarimeter (SXRP) uses the polarization sensitivity of a graphite Bragg crystal and a lithium Thomsom scattering target to measure the polarization of X-rays from astrophysical sources. The SXRP is a focal plane detector for the Soviet-Danish SODART telescopes which will be launched on the Soviet Spectrum-X-Gamma mission. The SXRP will be the third orbiting stellar X-ray polarimeter, and should provide an order of magnitude increase in polarization sensitivity over its predecessors.

Kaaret, P.↗
NASA NTRS1993

Infrared observations of the remarkable main-sequence star HD 98800

We verified that the IRAS source near HD 98800 is, in fact, coincident with this K5 V star to better than 1 arcsec at a wavelength of 10 micron. Thus about 10 percent of the energy of the multiple-star system HD 98800 emerges at IRAS wavelengths. This percentage is the largest known at any main-sequence star, and the implied mass in dust particles orbiting a few AU from HD 98800 is about six orders of magnitude greater than the mass of the zodiacal dust in the inner solar system. We suggest a few mechanisms that might account for the particles, but, basically, their origin and maintenance are not understood. In many ways, HD 98800 is the most unusual source in the IRAS catalogs.

Zuckerman, B.↗
NASA NTRS1993

The long-term dynamical behavior of short-period comets

The orbits of the known short-period comets under the influence of the Sun and all the planets except Mercury and Pluto are numerically integrated. The calculation was undertaken in order to determine the dynamical lifetimes for these objects as well as explaining the current orbital element distribution. It is found that a comet can move between Jupiter-family and Halley-family comets several times in its dynamical lifetime. The median lifetime of the known short-period comets from the time they are first injected into a short-period comet orbit to ultimate ejection is approximately 50,000 years. The very flat inclination distribution of Jupiter-family comets is observed to become more distended as it ages. The only possible explanation for the observed flat distribution is that the comets become extinct before their inclination distribution can change significantly. It is shown that the anomalous concentration of the argument of perihelion of Jupiter-family comets near 0 and 180 deg is a direct result of their aphelion distance being close to 5.2AU and the comet being recently perturbed onto a Jupiter-family orbit. Also the concentration of their aphelion near Jupiter's orbit is a result of the conservation of the Tisserand invariant during the capture process.

Levison, Harold F.↗
NASA NTRS1994

Visually guided grasping to study teleprogrammation within the BAROCO testbed

This paper describes vision functionalities required in future orbital laboratories; in such systems, robots will be needed in order to execute the on-board scientific experiments or servicing and maintenance tasks under the remote control of ground operators. For this sake, ESA has proposed a robotic configuration called EMATS; a testbed has been developed by ESTEC in order to evaluate the potentialities of EMATS-like robot to execute scientific tasks in automatic mode. For the same context, CNES develops the BAROCO testbed to investigate remote control and teleprogrammation, in which high level primitives like 'Pick Object A' are provided as basic primitives. In nominal situations, the system has an a priori knowledge about the position of all objects. These positions are not very accurate, but this knowledge is sufficient in order to predict the position of the object which must be grasped, with respect to the manipulator frame. Vision is required in order to insure a correct grasping and to guarantee a good accuracy for the following operations. We describe our results about a visually guided grasping of static objects. It seems to be a very classical problem, and a lot of results are available. But, in many cases, it lacks a realistic evaluation of the accuracy, because such an evaluation requires tedious experiments. We propose several results about calibration of the experimental testbed, recognition algorithms required to locate a 3D polyhedral object, and the grasping itself.

Devy, M.↗
NASA NTRS1995

SeaWiFS technical report series. Volume 31: Stray light in the SeaWiFS radiometer

Some of the measurements from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) will not be useful as ocean measurements. For the ocean data set, there are procedures in place to mask the SeaWiFS measurements of clouds and ice. Land measurements will also be masked using a geographic technique based on each measurment's latitude and longitude. Each of these masks involves a source of light much brighter than the ocean. Because of stray light in the SeaWiFS radiometer, light from these bright sources can contaminate ocean measurements located a variable number of pixels away from a bright source. In this document, the sources of stray light in the sensor are examined, and a method is developed for masking measurements near bright targets for stray light effects. In addition, a procedure is proposed for reducing the effects of stray light in the flight data from SeaWiFS. This correction can also reduce the number of pixels masked for stray light. Without these corrections, local area scenes must be masked 10 pixels before and after bright targets in the along-scan direction. The addition of these corrections reduces the along-scan masks to four pixels before and after bright sources. In the along-track direction, the flight data are not corrected, and are masked two pixels before and after. Laboratory measurements have shown that stray light within the instrument changes in a direct ratio to the intensity of the bright source. The measurements have also shown that none of the bands show peculiarities in their stray light response. In other words, the instrument's response is uniform from band to band. The along-scan correction is based on each band's response to a 1 pixel wide bright sources. Since these results are based solely on preflight laboratory measurements, their successful implementation requires compliance with two additional criteria. First, since SeaWiFS has a large data volume, the correction and masking procedures must be such that they can be converted into computationally fast algorithms. Second, they must be shown to operate properly on flight data. The laboratory results, and the corrections and masking procedures that derive from them, should be considered as zeroeth order estimates of the effects that will be found on orbit.

Hooker, Stanford B.↗