Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “open”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Substrate effects on the epitaxial growth of ZnGeP2 thin films by open tube organometallic chemical vapor deposition

Epitaxial ZnGeP2-Ge films have been grown on (111)GaP substrates using MOCVD. The films grown with dimethylzinc to germane flow rate ratio R greater than 10 show mirror-smooth surface morphology. Films grown with R less than 10 show a high density of twinning, including both double position and growth twins. Compared to films grown on (001) GaP substrates, the layers on (111) GaP generally show a higher density of microstructural defects. TEM electron diffraction patterns show that the films grown on (111) GaP substrates are more disordered than films grown on (001) GaP under comparable conditions. The growth rate on (111) GaP substrates is about 2.5 times slower than that on (001) GaP, and films grown on Si substrates show extensive twinning formation. Both TEM and SEM examinations indicate that smooth epitaxial overgrowth may be easier on (111) Si substrates than on (001) Si.

Xing, G. C.↗

Properties data for opening the Galileo's partially unfurled main antenna

An investigation was conducted into the friction and wear behavior of both unlubricated and dry-film-lubricated (Tiolube 460) titanium alloy (Ti-6Al-4V) in contact with an uncoated high-nickel-content superalloy (Inconel 718) both in vacuum and in air. The acquisition of friction and wear data for this sliding couple was motivated by the need for input data for the 'antenna stuck ribs model' effort to free Galileo's High Gain Antenna. The results of the investigation indicate that galling occurred in the unlubricated system in vacuum and that the coefficient of friction increased to 1.2. The abnormally high friction (1.45) was observed when relatively large wear debris clogged at the sliding interface. The coefficient of friction for the dry-film-lubricated system in vacuum is 0.04, while the value in air is 0.13. The endurance life of the dry-film lubricant is about three orders of magnitude greater in vacuum than in air. The worn surfaces of the dry-film-lubricated Ti-6Al-4V pin and Inconel 718 disk first run in humid air and then rerun in vacuum was completely different from that of the pin and disk run only in vacuum. When galling occurred in the humid-air and vacuum contact, coefficient of friction rose to 0.32 when sliding in humid air and to 1.4 when sliding in vacuum. The galling was accompanied by severe surface damage and extensive transfer of the Ti-6Al-4V to the Inconel 718, or vice versa. When spalling occurred in the dry-film-lubricated Ti-6Al-4V pin run only in vacuum, the coefficient of friction rose to 0.36 or greater. The wear damage caused by spalling can self-heal when rerun in vacuum - the coefficient of friction decreased to 0.05. The friction and wear data obtained can be used for the 'antenna stuck ribs model' effort to free Galileo's high gain antenna.

Miyoshi, Kazuhisa↗

Analysis of EM penetration into and scattering by electrically large open waveguide cavities using Gaussian beam shooting

Gaussian beam (GB) representation methods are used to analyze the electromagnetic coupling into and the scattering by a large nonuniform cavity. The aperture field in the cavity is decomposed into beams using the Gabor expansion, and shooting techniques are then employed. The method is illustrated only for the two-dimensional (2-D) case. The GBs are tracked axially using the rules of beam optics which ignore any beam distortion upon reflection at the walls. The effects of beam distortion are not significant for relatively slowly varying waveguide cavities. The field scattered into the exterior by the termination within the cavity is found using a reciprocity integral formulation which requires a knowledge of the beam fields near the termination. Numerical results based on this GB approach are presented and compared with results based on an independent reference solution.

Burkholder, Robert J.↗

Map-based trigonometric parallaxes of open clusters. II - The Hyades: 51 Tauri

The trigonometric parallax, mass, and mass ratio of 51 Tauri, a binary member of the Hyades star cluster, are determined. The parallax solution, 19.4 mas with a standard error of 1.1 mas, is slightly greater than its generally accepted value and yields a cluster distance of 4.30 +/-2.0 pc or a distance modulus equivalent of 3.16 +/- 0.10 mag, in excellent agreement with recent photographic parallax results. The weighted mean of all trigonometric parallax determinations of the cluster is now 22.9 +/-0.6 mas or a modulus of 3.20 +/- 0.06 mag. The total mass of the 51 Tauri system was found to be 2.56 +/- 0.44 solar masses. Adopting a magnitude difference in line with the spectral types of the components yields individual masses of 1.61 +/- 0.28 and 0.95 +/- 0.18 solar masses. This result places the mass of both the A8 V primary and the G0 secondary stars within the errors of the measurement of the mass-luminosity relation established for solar-neighborhood main-sequence stars.

Gatewood, George↗

B supergiants in open clusters and associations

The final report on project NAG5-78, 'IUE Observations of B Supergiants in the Large Magellanic Cloud', a collaborative effort between Garmany (U. of Colorado), Sonneborn (Goddard Space Flight Center) and Fitzpatrick (Princeton Univ.) is presented. Over 90 B supergiants in the Large Magellanic Cloud with the IUE satellite, using the low dispersion mode were observed. These stars were chosen because they resemble the precursor star to SN 1987a, and a data base in the continuing effort to understand why the precursor star was a blue, not a red supergiant was needed. The observations were all reduced and made into an atlas, and efforts to understand the evolutionary history of stars of the H-R diagram are underway.

Garmany, C. D.↗

An open, parallel I/O computer as the platform for high-performance, high-capacity mass storage systems

APTEC Computer Systems is a Portland, Oregon based manufacturer of I/O computers. APTEC's work in the context of high density storage media is on programs requiring real-time data capture with low latency processing and storage requirements. An example of APTEC's work in this area is the Loral/Space Telescope-Data Archival and Distribution System. This is an existing Loral AeroSys designed system, which utilizes an APTEC I/O computer. The key attributes of a system architecture that is suitable for this environment are as follows: (1) data acquisition alternatives; (2) a wide range of supported mass storage devices; (3) data processing options; (4) data availability through standard network connections; and (5) an overall system architecture (hardware and software designed for high bandwidth and low latency). APTEC's approach is outlined in this document.

Abineri, Adrian↗

O-Plan2: The open planning architecture

The O-Plan2 Project at the Artificial Intelligence Applications Institute of the University of Edinburgh is exploring a practical computer based environment to provide for specification, generation, interaction with, and execution of activity plans. O-Plan2 is intended to be a domain-independent general planning and control framework with the ability to embed detailed knowledge of the domain. Various aspects of the project are presented.

Drabble, Brian↗

Opening remarks

The year's accomplishments at the onset of the yearly NAPEX meetings are reviewed. Therefore, I will present the last year's accomplishments and the plans for the next year. The studies supported by the Propagation Program during the last year are listed: OLYMPUS data collection and analysis; the ACTS Propagation Program; low elevation angle 11-GHz measurements; satellite broadcast and mobile studies; radiometric techniques; propagation models database; NASA Reference Publication 1274; CCIR activities; fade detection and compensation; rain rate measurements; and information dissemination.

Davarian, Faramaz↗

Transition to chaos in an open unforced 2D flow

The present numerical study of unsteady, low Reynolds number flow past a 2D airfoil attempts to ascertain the bifurcation sequence leading from simple periodic to complex aperiodic flow with rising Reynolds number, as well as to characterize the degree of chaos present in the aperiodic flow and assess the role of numerics in the modification and control of the observed bifurcation scenario. The ARC2D Navier-Stokes code is used in an unsteady time-accurate mode for most of these computations. The system undergoes a period-doubling bifurcation to chaos as the Reynolds number is increased from 800 to 1600; its chaotic attractors are characterized by estimates of the fractal dimension and partial Liapunov exponent spectra.

Pulliam, Thomas H.↗

Hypersonic flow past open cavities

The hypersonic flow over a cavity is investigated. The time-dependent compressible Navier-Stokes equations, in terms of mass averaged variables, are numerically solved. An implicit algorithm, with a subiteration procedure to recover time-accuracy, is used to perform the time-accurate computations. The objective of the study is to investigate the effects of Reynolds number and cavity dimensions. The comparison of the computations with available experimental data, in terms of time mean static pressure, heat transfer, and Mach number show good agreement. In the computations large vortex structures, which adversely affect the cavity flow characteristics, are observed at the rear of the cavity. A self-sustained oscillatory motion occurs within the cavity over a range of Reynolds number and cavity dimensions. The frequency spectra of the oscillations show good agreement with a modified semi-empirical relation.

Morgenstern, Alagacyr, Jr.↗