Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesh”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Cryogenic metal mesh bandpass filters for submillimeter astronomy

The design and performance of a tunable double-half-wave bandpass filter centered at 286 microns (Delta lambda/lambda = 0.16) and operating at cryogenic temperatures (for astronomy applications) are presented. The operating principle is explained, and the fabrication of the device, which comprises two identical mutually coupled Fabry-Perot filters with electroformed Ni-mesh reflectors and is tuned by means of variable spacers, is described. A drawing of the design and graphs of computed and measured performance are provided. Significantly improved bandpass characteristics are obtained relative to the single Fabry-Perot filter.

Dragovan, M.↗

Electrostatic shielding of a charged conducting sphere by a fine-mesh grounded screen

A simple model of an electrostatic-shielding arrangement that will reduce the electric field from the Near Infrared Mapper Spectrometer aboard the Galileo spacecraft is presented. The system considered consists of a charged conducting sphere held at a fixed absolute potential via a power source. This system is screened by a larger, concentric sphere made of fine mesh which is grounded. A derivation based on elementary principles of electrostatics is used to show that the shielding effectiveness of the screen can be expressed in terms of the separation between the two spheres and another quantity B that is an intrinsic property of the screen. For a given screen, B can be determined by measuring the capacitance per unit area and separation between a flat piece of the screen and a parallel metal plate.

Edmonds, L.↗

Into mesh lubrication of spur gears with arbitrary offset oil jet. I - For jet velocity less than or equal to gear velocity

An analysis was conducted for into mesh oil jet lubrication with an arbitrary offset and inclination angle from the pitch point for the case where the oil jet velocity is equal to or less than pitch line velocity. The analysis includes the case for the oil jet offset from the pitch point in the direction of the pinion and where the oil jet is inclined to intersect the common pitch point. Equations were developed for the minimum oil jet velocity required to impinge on the pinion or gear and the optimum oil jet velocity to obtain the maximum impingement depth.

Akin, L. S.↗

High-Performance Heat Pipe With Screen Mesh

Liquid distributed more evenly in evaporator section. Improved heat pipe contains an artery and wick rolled from stainless-steel screen of 180 mesh (openings about 80 micrometers). Screen material helps to prevent dryout in evaporator section by conducting liquid through hotspots and to vaporchannel wall. Insert reduces incidence of dryout at hotspots or during intervals of general thermal overload.

Alario, J. P.↗

Wrinkle-Free Hydroforming of Wire Mesh

Plastic films lubricate workpiece so it deforms smoothly. Thin layers of plastic below top die and above bottom die ensure wire screen slides as shaped by hydroforming. Plastic layers are 0.0043 in. (0.11 m) thick. Preformed to contours of dies and final workpiece. New method of hydroforming fine-wire-mesh heat-shield screens eliminates wrinkles and marks. Prevents screen from being damaged and pores from becoming blocked.

Fadness, J.↗

Stability of interfaces with mesh refinement

A study is conducted of the stability of mesh refinement in space and time for several different interface equations and finite-difference approximations. First, a root condition which implies stability for the initial-boundary value problem for this type of interface is derived. From the root condition, the stability of several interface equations is proved, using the maximum principle. In some cases, the final verification steps can be done analytically; in other cases, a simple computer program has been written to check the condition for values of a parameter along the boundary of the unit circle. Using this method, stability for Lax-Wendroff with all the interface conditions considered, and for Leapfrog with interpolation interface conditions when the fine and coarse grids overlap is proved.

Berger, M. J.↗

A mesh re-zoning technique for finite element simulations of metal forming processes

Based on some fundamental properties of finite element approximations, a mesh re-zoning scheme is proposed for finite element simulations of metal forming problems. It is demonstrated that this technique is indispensable in analyzing many difficult forming processes, especially when there exist corners or very irregular shapes on the boundaries. The algorithm is tested by a backward extrusion process and direct extrusion through a square die.

Cheng, J.-C.↗

Iterative methods for elliptic finite element equations on general meshes

Iterative methods for arbitrary mesh discretizations of elliptic partial differential equations are surveyed. The methods discussed are preconditioned conjugate gradients, algebraic multigrid, deflated conjugate gradients, an element-by-element techniques, and domain decomposition. Computational results are included.

Nicolaides, R. A.↗

Helical gears with circular arc teeth: Generation, geometry, precision and adjustment to errors, computer aided simulation of conditions of meshing and bearing contact

The authors have proposed a method for the generation of circular arc helical gears which is based on the application of standard equipment, worked out all aspects of the geometry of the gears, proposed methods for the computer aided simulation of conditions of meshing and bearing contact, investigated the influence of manufacturing and assembly errors, and proposed methods for the adjustment of gears to these errors. The results of computer aided solutions are illustrated with computer graphics.

Litvin, Faydor L.↗

Finite difference operators on unstructured triangular meshes

A new form of the Laplace operator is derived which is shown to be second-order accurate when calculated at mesh triangle nodes if the cells corresponding to the nodes have a high degree of symmetry. It is demonstrated that the Laplace operator directly derived from Stokes' integral theorem is only zeroth-order accurate on these same cells. The construction of gradient and Laplace operators on unstructured triangular grids are discussed from the variational point of view. Two discrete representations of the Laplacian are compared to each other, and conclusions are drawn regarding their accuracy on a pointwise basis. Finally, geometric relations valid on arbitrary polygons are given for completeness in an appendix.

Erlebacher, G.↗

A Lagrangian method for the shallow water equations based on a Voronoi mesh - Flows on a rotating sphere

A Lagrangian scheme using the Voronoi mesh is applied to study shallow water flow on a sphere. Discrete approximations to the shallow water equations are obtained for the surfaces of a nonrotating and a rotating sphere, and discrete differential operators are defined for the gradient and the divergence on the sphere. Dissipation is put into the model, when needed, by merging fluid points when they get too close to each other. The full numerical scheme is described and results of numerical computations on various test cases are given, including zonal flow and the Riemann problem.

Augenbaum, J. M.↗

Extension and applications of flux-vector splitting to unsteady calculations on dynamic meshes

The Van Leer method of flux-vector splitting for the Euler equations is extended for use on moving meshes and all the properties of the original splittings are maintained. The solution is advanced in time with an implicit, approximately factored algorithm. The use of multiple grids to reduce the computer time is investigated. A substantial reduction in computer time to resolve a pitching cycle is easily obtained with virtually no loss in accuracy. A subiterative procedure to eliminate factorization and linearization errors so that larger time steps can be used is also investigated. Subsequent computations show good agreement with experimental data for transonic and supersonic airfoils and wings undergoing forced pitching oscillation.

Anderson, W. Kyle↗

Accurate multigrid solution of the Euler equations on unstructured and adaptive meshes

A method for accurately solving inviscid compressible flow in the subcritical and supercritical regimes about complex configurations is presented. The method is based on the use of unstructured triangular meshes in two dimensions, and special emphasis is placed on the accuracy and efficiency of the solutions. High accuracy is achieved by careful scaling of the artificial dissipation terms, and by reformulating the inner and outer boundary conditions for both the convective and dissipative operators. An adaptive grid refinement strategy is presented which enhances the solution accuracy for complex flows. When coupled with an unstructured multigrid algorithm, this method is shown to produce an efficient solver for flows about arbitrary configurations.

Mavriplis, Dimitri J.↗

Construction and evaluation of an imaging focussed-mesh electron multiplier for space instrumentation

A focused-mesh electron multiplier (FMEM) has been combined with a wedge and strip position-sensitive anode to create a novel detector that is considered likely to have a number of applications in space astronomy and laboratory image sensing. Results from the first application of a wedge and strip anode to an FMEM are presented including spatial resolution, spatial linearity, background rate, and pulse risetime. The converted multiplier retains the attributes of an FMEM that made it attractive in the first place, such as low background, high speed, and high dynamic range.

Vallerga, J.↗

Generating fractal-like surfaces on general purpose mesh-connected computers

Realistic images of natural surfaces are often generated using computationally expensive stochastic modeling techniques. Here a parallel procedure to generate such models is presented. The target machines are general-purpose mesh-connected computers. The complexity of the procedure is similar to that of a proposed special-purpose parallel fractal generator.

Wainer, Michael↗

Accurate multigrid solution of the Euler equations on unstructured and adaptive meshes

A method for accurately solving inviscid compressible flow in the subcritical and supercritical regimes about complex configurations is presented. The method is based on the use of unstructured triangular meshes in two dimensions, and special emphasis is placed on the accuracy and efficiency of the solutions. High accuracy is achieved by careful scaling of the artificial dissipation terms, and by reformulating the inner and outer boundary conditions for both the convective and dissipative operators. An adaptive grid refinement strategy is presented which enhances the solution accuracy for complex flows. When coupled with an unstructured multigrid algorithm, this method is shown to produce an efficient solver for flows about artibrary configurations.

Mavriplis, Dimitri J.↗

Flux-vector splitting for unsteady calculations on dynamic meshes

The method of flux vector splitting used is that of Van Leer. The fluxes split in this manner have the advantage of being continuously differentiable at eigenvalue sign changes and this allows normal shocks to be captured with at most two interior zones, although in practice only one zone is usually observed. The fluxes as originally derived, however did not include the necessary terms appropriate for calculations on a dynamic mesh. The extension of the splitting to include these terms while retaining the advantages of the original splitting is the main purpose of this investigation. In addition, the use of multiple grids to reduce the computer time is investigated. A subiterative procedure to eliminate factorization and linearization error so that larger time steps can be used is also investigated.

Anderson, W. Kyle↗