Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “input data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

ASK: Adversarial Soft k-Nearest Neighbor Attack and Defense

K-Nearest Neighbor (kNN)-based deep learning methods have been applied to many applications due to their simplicity and geometric interpretability. However, the robustness of kNN-based deep classification models has not been thoroughly explored and kNN attack strategies are underdeveloped. In this paper, we first propose an Adversarial Soft kNN (ASK) loss for developing more effective kNN-based deep neural network attack strategies and designing better defense methods against them. Our ASK loss provides a differentiable surrogate of the expected kNN classification error. It is also interpretable as it preserves the mutual information between the perturbed input and the in-class-reference data. We use the ASK loss to design a novel attack method called the ASK-Attack (ASK-Atk), which shows superior attack efficiency and accuracy degradation relative to previous kNN attacks on hidden layers. We then derive an ASK-Defense (ASK-Def) method that optimizes the worst-case ASK training loss. Experiments on CIFAR-10 (ImageNet) show that (i) ASK-Atk achieves ≥13% (≥ 13% ) improvement in attack success rate over previous kNN attacks, and (ii) ASK-Def outperforms the conventional adversarial training method by ≥ 6.9% (≥ 3.5% ) in terms of robustness improvement. Relevant codes are available at https://github.com/wangren09/ASK .

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Large Eddy Simulation of Gasoline Sprays in a Lagrangian–Eulerian Framework Using the High-Order Spectral Element Method

Predicting the spray evolution using simulations requires accurate modeling of the turbulent gas-phase flow field. Here, in this study, the high-order spectral-element method (SEM), implemented in the code Nek5000, was used to provide highly resolved solutions to the turbulent flow field. Spray modeling capabilities were implemented into the Nek5000 code. The spray is modeled in a Lagrangian–Eulerian (LE) framework, where the liquid is represented by discrete parcels of droplets. The method for coupling liquid and gas in the context of SEM is described, which allows for very fine meshes to be used without affecting the stability of the solution. Large-eddy simulations (LES) of the eight-hole ECN Spray G gasoline injector were conducted. Numerical results are compared against experimental data for liquid penetration, droplet size and gas velocity. The morphology of the multiplume spray is compared against experimental data. The effect of different spray injection inputs is analyzed. It was found that using a plume direction of 33 deg and an injection cone angle of 30 deg produced the best results overall. This work shows the applicability of SEM for spray modeling applications, where use of a high-order flow solver can help us understand the multiplume spray aerodynamics and how it leads to plume collapse under certain conditions. Results also highlight the need for tuning spray input parameters in the LE framework, even when high-fidelity gas flow solutions are possible.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

SmartFuse: Reconfigurable Smart Switches to Accelerate Fused Collectives in HPC Applications

Communication switches have sometimes been augmented to process collectives (e.g., the IBM BlueGene project and the Mellanox SHArP switch). In this work, we find that there is a great acceleration opportunity through the further augmentation of switches to accelerate more complex functions that combine communication with computation. We consider three types of such functions. The first is fully-fused collectives built by fusing multiple existing collectives like Allreduce with Alltoall. The second is semi-fused collectives built by combining a collective with another computation. The third we refer to as higher-order collectives built by combining multiple computations and communications, such as to perform matrix-matrix multiply (PGEMM). In this work, we propose a framework called SmartFuse to accelerate fused collective functions. The core of SmartFuse is a reconfigurable smart switch to support these operations. The semi/fully fused collectives are implemented with a CGRAlike architecture, while higher-order collectives are implemented with a more specialized computational unit that can also schedule communication. Supporting our framework is software to evaluate and translate relevant parts of the input program, compile them into a control data flow graph, and then map this graph to the switch hardware. The proposed framework, once deployed, has the strong potential to accelerate existing HPC applications transparently by encapsulation within an MPI implementation. Experimental results show that this approach improves the performance of the PGEMM kernel, MINIFE, and AMG by, on average, 94%, 15%, and 13%, respectively.

Haghi, Pouya↗
DOE OSTI2021

LCOC (Levelized Cost of Light-Duty EV Charging Calculator)

This code was developed to calculate the levelized cost of light-duty electric vehicle (EV) charging (LCOC) for the paper "Levelized Cost of Charging Electric Vehicles in the United States" by Borlaug et al.(https://doi.org/10.1016/j.joule.2020.05.013). The calculation takes inputs from a variety of publicly available data sources (e.g., utility tariffs from the Utility Rate Database; EV charging station locations from the Alternative Fuels Data Center; energy price forecasts from the Energy Information Administration) and produces the current LCOC, considering when, where, and how light-duty EVs are recharged. In addition, the lifetime fuel cost savings (LFCS) calculation estimates the discounted fuel cost savings for a new battery EV (BEV) or plug-in hybrid EV (PHEV) over a 15-year time horizon using state-level gasoline price and LCOC projections.

Borlaug, Brennan↗
DOE OSTI2022

PUFFIn

The PUFFIn software package is a graphical user interface that allows for photon and electron beam calculations using the PENELOPE computer code. It prepares the required input files and displays the resulting output data. It can be used by anyone interested in the interaction of photon or electron beams with matter

Schwarz, Randy↗
DOE OSTI2026

Simulation Inputs for the METS-R Simulator

This dataset served as the input for the METS-R simulator. Data include the historical and predicted demand, cache of transit scheduling results, cache of candidate paths for routing, and link-level average speed and corresponding standard deviations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

ECP Report: Update on Proxy Applications and Vendor Interactions

The ExaLearn miniGAN team (Ellis and Rajamanickam) have released miniGAN, a generative adversarial network(GAN) proxy application, through the ECP proxy application suite. miniGAN is the first machine learning proxy application in the suite (note: the ECP CANDLE project did previously release some benchmarks) and models the performance for training generator and discriminator networks. The GAN's generator and discriminator generate plausible 2D/3D maps and identify fake maps, respectively. miniGAN aims to be a proxy application for related applications in cosmology (CosmoFlow, ExaGAN) and wind energy (ExaWind). miniGAN has been developed so that optimized mathematical kernels (e.g., kernels provided by Kokkos Kernels) can be plugged into to the proxy application to explore potential performance improvements. miniGAN has been released as open source software and is available through the ECP proxy application website (https://proxyapps.exascaleproject.ordecp-proxy-appssuite/) and on GitHub (https://github.com/SandiaMLMiniApps/miniGAN). As part of this release, a generator is provided to generate a data set (series of images) that are inputs to the proxy application.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Algae/Wood Blends Hydrothermal Liquefaction and Upgrading: 2019 State of Technology

The fiscal year (FY) 2019 State of Technology (SOT) Assessment for a microalgae and woody biomass blend feedstock hydrothermal liquefaction (HTL) and biocrude upgrading system has been completed and reported here. This study is a preliminary economic analysis for this system. Inputs from the 2019 NREL open pond algae cultivation model provided microalgae seasonal flowrates and dewatered algae feedstock price. These inputs have been coupled with modeled experimental data from PNNL for algae/wood blends processed via HTL to assess the cost impacts. The TEA results demonstrated a 28% reduction in the conversion cost only from $1.22/gge in 2018 to $0.88/gge in 2019.

09 BIOMASS FUELS↗
DOE OSTI2021

Considerations for Distributed Energy Resource Integration in Puerto Rico: DOE Multi-Lab Grid Modeling Support for Puerto Rico; Analytical Support for Interconnection and IEEE Std 1547-2018 National Renewable Energy Laboratory (Task 3.0)

To ensure the sustainable long-term recovery of Puerto Rico's electric power grid from hurricanes María and Irma and to build capacity to manage future potential natural disasters in the most secure and resilient way, the U.S. Department of Energy (DOE) convened experts from multiple national laboratories to develop a comprehensive set of data, models, analytic tools, and studies, considering inputs from a wide variety of stakeholder groups, to support technically sound recommendations for Puerto Rico's energy investment decisions. A resilient electric grid is vital to Puerto Rico's security, economy, and way of life, and it will provide the foundation for essential services that people and businesses on the island rely on every day. This report shows progress for a grid modeling task under the DOE-sponsored project that is a collaboration among the National Renewable Energy Laboratory (NREL) and other national laboratories. In Phase 1 of the multilab effort to support Puerto Rico's recovery, NREL provided the utility company Puerto Rico Electric Power Authority (PREPA) recommendations for a new framework of interconnection standards to accelerate the integration of utility-scale, transmission-connected renewable electrical generation and energy storage that ensure cross-technology compatibility and enable high deployment levels without compromising grid reliably, safety, or security. This Phase 2 report focuses on the interconnection of distributed energy resources (DERs) to the electric distribution system in Puerto Rico. This report is intended to familiarize the reader with Puerto Rico's distribution infrastructure and operational practices and procedures that are relevant to DER interconnection. The report also provides considerations for streamlining the interconnection process given the expected increase in deployments resulting from Puerto Rico's renewable portfolio standard (RPS) goal of 100% renewables by 2050. Accordingly, the report identifies considerations and concerns associated with the increase in intermittent generation, strategies for DER interconnection best practices, and the potential use of the latest technological solutions identified in the latest revision of the Institute of Electrical and Electronics Engineers (IEEE) 1547-2018 interconnection standard.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Fission TPC FY2020 Report (Mid Q2 FY2021): Preliminary 235 U(n,f)/ 6 Li(n,t)α Cross Section Ratio Analysis & Update on the 239 Pu(n,f) Data Collection

Fission TPC L2 Milestone Description: The fission TPC experimental campaign is in its final stages of collecting high precision (n,f) cross section data aimed at improving our understanding of the 239 Pu fission process. During FY 2019 235 U(n,f)/ 6 Li(n,t) ratio data collection began at WNR/LANSCE. This data is the first step in demonstrating the efficacy of 6 Li(n,t) as a diagnostic standard for a 239 Pu(n,f) ratio measurement. In FY 2020 and FY2021, the NIFFTE Collaboration will analyze 235 U(n,f)/ 6 Li(n,t) data already collected to establish this technique in preparation for 239 Pu(n,f)/ 6 Li(n,t) ratio data. Additionally, the ability to vapor deposit 239 Pu was developed in 2019, greatly improving target quality. As access to experimental facilities allows, 239 Pu/ 235 U and 239 Pu/ 6 Li data will be collected to provide new inputs for evaluation of the 239 Pu(n,f) cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Yield and PDV Measurements of the Godiva-IV Critical Assembly

A high dynamic range, scinillator based detector, the MHD-240, was used to measure the gamma and neutron flux of several prompt critical bursts of the Godiva-IV assembly. The measurements provided the alpha and FWHM for several different burst temperatures. Calibrations of the MHD240 gamma and neutron sensitivity along with MCNP based simulation of the Godiva-IV assembly allowed us to also determine the total fission yield of the burst integrated over approximately 5 ms. In addition a Photo Doppler Velocimetry measurement was conducted to determine the surface motion vibrational frequency of Godiva-IV assembly during the bursts. The combined data were collected to be used as input to multi-physics simulation of the Godiva-IV assembly. This is a preliminary report, there is an ongoing effort to update the MCNP simulations used in the analysis and develop a correction for the room return component of the measured signal.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Improving SGP4 Orbit Determination with New State Estimation Algorithm

The Simplified General Perturbations 4 Model (SGP4) is a well-known tool for performing satellite orbit determination. However, uncertainties and inaccuracies in the initial state inputs (required by SGP4) degrade the performance of the propagator. We present a new state estimation algorithm that allows for independent computation of these initial inputs using Unscented Kalman Filtering and GPS data from a satellite. The algorithm is tested on real flight data and demonstrates a notable performance improvement over the standard method of orbit determination using SGP4.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Energy Resilient Recovery in Puerto Rico: Hurricane Maria Recovery Support

This report covers microgrids as a special application of distributed energy resources (DERs) in Puerto Rico. This is one of a series of reports describing the U.S. Department of Energy (DOE) multi-laboratory efforts undertaken. To ensure the sustainable, long-term recovery of Puerto Rico's electric power grid from hurricanes Maria and Irma and to build capacity to manage future potential natural disasters in the most secure and resilient way, DOE convened experts from multiple national laboratories to develop a comprehensive set of data, models, analytic tools, and studies, considering inputs from a wide variety of stakeholder groups, to support technically sound recommendations for Puerto Rico's energy investment decisions. In Phase 1 of the multi-laboratory effort to support Puerto Rico's recovery, the National Renewable Energy Laboratory (NREL) provided the utility company Puerto Rico Electric Power Authority (PREPA) recommendations for a new framework of interconnection standards to accelerate the integration of utility-scale, transmission-connected, renewable electrical generation and energy storage that ensure cross-technology compatibility and enable high deployment levels without compromising grid reliability, safety, or security (https://www.nrel.gov/docs/fy19osti/73848.pdf). In Phase 2, NREL published a report focused on the interconnection of distributed energy resources (DERs) to the electric distribution system in Puerto Rico (https://www.nrel.gov/docs/fy21osti/77127.pdf). This report familiarized the reader with Puerto Rico's distribution infrastructure and operational practices and procedures that are relevant to DER interconnection. The report also provided considerations for streamlining the interconnection process given the expected increase in deployments resulting from Puerto Rico's renewable portfolio standard goal of 100% renewables by 2050. Accordingly, the report identifies considerations and concerns associated with the increase in intermittent generation, strategies for DER interconnection best practices, and the potential use of the latest technological solutions identified in the latest revision of the Institute of Electrical and Electronics Engineers 1547-2018 interconnection standard. Additionally, the report identified ways to improve the physical resiliency of installed DERs. This task describes how distributed energy systems may participate in and contribute to improving the resiliency of Puerto Rico's energy infrastructure in the future. This report presents an analysis of the Puerto Rico grid to illustrate the possible different microgrid and minigrid scenarios. The capability to form sustained microgrids and minigrids has the potential to provide a high level of resiliency during disturbances on the grid. DERs, on the other hand, have the capability to aid in the microgrid operation by providing grid support as well as grid-forming functionality. Other tasks in Phase 3 include voltage regulation in distribution networks using DERs and transmission-and-distribution co-simulation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Introduction to Evolve Central Appalachia

The Evolve-CAPP project is developing and implementing strategies to enable the Central Appalachian basin to realize its full economic potential for producing high-value, non-fuel, carbon-ore (CO) products, rare earth elements (REE), and critical minerals (CM). The Basinal Assessment of CORE-CM Resources is a state-of-the-art geological model and comprehensive database that will be used to identify, locate, and quantify in-situ resources in the basin. Restrictive aspects of resource recovery, such as ownership and legal restrictions, are being considered in estimating recoverable resources. A gap analysis of missing or unavailable data that could not be fully integrated in the initial assessment due to budget, access, or other constraints during the assessment effort is planned. A characterization and data acquisition plan to fully characterize the basin’s CORE-CM potential will address gaps in data. The plan will be developed with input from project team members and relevant stakeholders, including land and mineral holding companies and coal operators, who maintain sampling programs as part of their normal operations.

Bishop, Richard↗
DOE OSTI2022

Materials Scorecards, Phase 2: Advanced Materials and Manufacturing Technology

This report presents updated material score cards with detailed justification of the proposed rating provided and quantifies the readiness of the advanced manufacturing of materials for nuclear applications. Based on an expanded literature review of available data, the scores in this report (Phase 2) have either been modified or remained constant as compared with Phase 1 scoring. The rating justification are provided for each scoring criteria whereas the maturity quantification of additively manufactured alloys and the knowledge gaps are discussed with reference traceability. This report focuses on the detailed justification and traceability for the adoption of additively manufactured 316SS, SS304, Alloy 800H, Graphite C/C, Alloy N, Silicon Carbide, HT9, Alloy 617, and Alloy 718. Significant variability in data and knowledge gaps exist among the identified materials. The scorecards are therefore based on published literature data, industry response to a survey, stakeholder input collected at workshops, and expert opinion. The interpretation and assessment were somewhat challenged as experimental process parameters and methodology varied and best judgment was exercised for score quantification. This assessment reflects the overall level of technical maturity for AM materials and their deployment in Gen-VI nuclear systems. These Phase 2 scorecards are likely to be revised based on additional input from stakeholders and as new research results become available.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ASME Code change proposal to implement new universal high temperature constitutive models for Section III, Division 5

This report completes work on a universal high temperature constitutive model suitable for use with the ASME Boiler & Pressure Vessel Code Section III, Division 5 rules for the design by inelastic analysis of Class A nuclear reactor components. The goals of this work are to provide a simple model form that adequately captures the high temperature response of materials and can be applied to any future Code material. Additionally, the report describes an automated process for calibrating a model against test data. The idea is to simplify the effort required to generate a constitutive model for an arbitrary material, provided test data is available. This will accelerate the process of qualifying new Code materials in the future. In addition, the report provides calibrated models and detailed validation comparisons to test data for five currently-qualified or soon-to-be qualified materials: 316H, Grade 91, Alloy 800H, Alloy 617, and Alloy 709. The report surveys the available data for the remaining two ASME Class Materials --- 2.25Cr-1Mo and 304H --- concluding that there is enough data data to generate a model for 2.25Cr-1Mo steel provided some additional sources of non-public data can be included in the test database, but that a dedicated cyclic test campaign would be needed for 304H. Supplemental material includes the full text of an ASME Code change proposal to incorporate the models for the four currently-qualified Class A material, detailed validation comparisons to test data for the five material models, and input files for reference implementations of the constitutive models in the NEML and NEML2 modeling frameworks.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Model run output for WM-ABM 2024 HESS Publication

Model output for computational experiments introducing WM-ABM. See associated HESS publication here: https://egusphere.copernicus.org/preprints/2023/egusphere-2023-1604/ all_nldas_cdl_data_v3.txt - Cropland Data Layer data aggregated to 1/8 degree resolution for input into the PMP calibration process. Variables include NLDAS ID, crop type, year, the count of pixels in the grid cell of the crop type, CDL crop ID, and GCAM crop ID. 20230115 ABM runs - WM-ABM model outputs for various scenarios described in HESS publication. If multiple versions exist (e.g., v2, v3, etc.) latest version indicates dataset generated for manuscript. The "baseline" run is the primary run, where as the "memXX" runs indicate sensitivity runs testing different parameters of agent memory. Output files starting with "abm_results_" include groundwater irrigated acres and surface water irrigated acres for each farm/agent combination. Other CSV outputs provide summary statistics of various agent and water shortage outcomes, used for generation of figures in the HESS manuscript.

ABM↗
DOE OSTI2026

Raw soil carbon dioxide, moisture, temperature and micrometeorological data in the East River Watershed, Colorado June 2021-June 2024. (DE-SC0021139)

This dataset contains raw data from four tripod stations along an elevation gradient on Snodgrass Mountain in the East River Watershed, CO, USA. Each station contains a datalogger connected to 3 soil Carbon Dioxide CO2 gas probes, 3 soil temperature/moisture sensors and a micrometeorological station. Sensors are scanned every minute, and the 30 minute average is reported. The file snodgrass_soil_ESS.csv contains raw data, a row of column descriptors, and units of measurements. some data processing and QA/QC was done to filter out data from sensors that went bad and extreme outliers. CO2 sensors that went bad were replaced with new sensors as soon as possible. This research was performed to investigate the ecohydrological linkages of belowground carbon processes in the East River watershed forested communities to better understand how these ecosystems will respond to a changing cold-season moisture input. This is the second version of this data set and was modified on 10/01/2024. The primary change in the data was the addition of data from the fall of 2022 to June of 2024. In addition, minor QA/QC was done to filter out data from sensors that went bad and extreme outliers. THe filtered data are now NA's in this data frame and primarily the CO2 sensors. Limited to no QA/QC has been done on the other environmental data. This is now the third version of the data set, and was modified 03/25/2026. The primary change in the data was the addition of data from the June of 2024 to December 2025. Further r QA/QC was done with the new data to filter out bad data from faulty sensors and extreme outliers. The filtered data are now NA's in this data frame and primarily the CO2 sensors. Limited to no QA/QC has been done on the other environmental data. ##This additional data was funded under DE-SC0024218( Responses of Plant and Microbial Respiration Sources to Changing Cold Season Climate Drivers in the East River Watershed)

54 ENVIRONMENTAL SCIENCES↗