Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heavy elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Payload Accommodations in NASA's Space Launch System, Block 1 and Beyond

As part of NASA's new deep space exploration system, the Space Launch System (SLS) will provide the United States with guaranteed access to deep space and an unparalleled capability for launching primary and co-manifested payloads beyond Earth's orbit. Planned missions for the new SLS family of vehicles include launching the Orion spacecraft and elements of the new Gateway astronaut-tended outpost to lunar orbit and sending robotic probes deep into the solar system, such as to Jupiter's moon Europa. If mission parameters allow, secondary payloads in 6U, 12U or larger sizes will also have rideshare opportunities, providing CubeSats with access to deep space. The SLS vehicle will evolve into progressively more powerful variants with fairings in several sizes available to meet an array of mission needs. Superior mass, volume and characteristic energy (C3) enable sending larger, heavier payloads to a variety of destinations. Several elements of the Block 1 vehicle for the first mission, Exploration Mission-1 (EM-1) are complete and have been delivered to the Exploration Ground Systems (EGS) Program at Kennedy Space Center (KSC), which has responsibility for integrating and launching the vehicle. Contractors are already at work manufacturing the second Block 1 vehicle and incorporating numerous lessons learned in manufacturing America's first super heavy-lift deep space rocket since the Apollo Program's Saturn V enabled humankind to take a giant leap forward.

Schorr, Andrew A.↗
DOE OSTI2024

Neutrinoless double beta decay rates in the presence of light sterile neutrinos

We investigate neutrinoless double-beta decay (0νββ) in minimal extensions of the Standard Model of particle physics where gauge-singlet right-handed neutrinos give rise to Dirac and Majorana neutrino mass terms. We argue that the standard treatment of these scenarios, based on mass-dependent nuclear matrix elements, is missing important contributions to the 0νββ amplitude. First, new effects arise from the exchange of neutrinos with very small (ultrasoft) momenta, for which we compute the associated nuclear matrix elements for the decays of 76 Ge and 136 Xe. These contributions can dominate the 0νββ rate in cases with light sterile neutrinos. The ultrasoft terms are also relevant in the more standard scenario of just three light Majorana neutrinos where they lead to a 10% reduction of the total 0νββ amplitude. Secondly, we highlight the importance of short-range terms associated with medium-heavy sterile neutrinos and provide explicit formulae that can be used in phenomenological analyses. As examples we discuss impact of these new effects in several explicit scenarios, including a realistic 3 + 2 model with two right-handed gauge-singlet neutrinos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Unraveling the solvation phenomena of Ln 3+ cations in room-temperature ionic liquids: A computational study

Rare-earth elements (REEs), classified as critical materials, are difficult to separate due to their similar chemical properties and slight differences in ionic radius. Room-temperature ionic liquids (RTILs) have gained significant attention for REE separation because of their unique physicochemical properties and environmental advantages. In this study, we have investigated the solvation mechanisms of two RE cations (Ln 3+ ), Nd 3+ (light REE) and Yb 3+ (heavy REE), in two 1-butyl-3-methylimidazolium ([BMIM] + )-based RTILs using bis(trifluoromethylsulfonyl)imide ([NTf 2 ] − ) and acetate ([OAc] − ) as the respective anions, employing classical molecular dynamics (MD) simulations and density functional theory (DFT) techniques. From MD simulations, it is evident that Ln 3+ cations are primarily solvated by RTIL anions in the first solvation shell, while [BMIM] + cations form the second solvation shell with their numbers depending on the size and composition of the first solvation shell. The neutralizing [NO 3 − ] counterions are mainly solvated by [BMIM] + cations in their first solvation shell. Relative free energy change of solvation calculations using thermodynamic integration (TI) method indicate that Yb 3+ is more strongly solvated than Nd 3+ in both RTILs, a trend further supported by DFT calculations. While both methods predict consistent qualitative behavior, differences in models and energy evaluations lead to variations in absolute values. Overall, this study provides a comprehensive understanding of the solvation behavior of Ln 3+ cations in RTILs, demonstrating a stronger solvation preference for the heavy Ln 3+ cation (Yb 3+ ). In conclusion, these findings have implications for the design of RTIL-based separation processes for REEs.

Ash, Tamalika [Ames Lab., and Iowa State Univ., Am↗
DOE OSTI2020

Preparation and Characterization of Various Kraft Lignins and Impact on Their Pyrolysis Behaviors

Lignin-derived chemicals and fuel products have received much attention in the context of bio-refinery. In this study we prepared and characterized various lignin samples from black liquor (BL), a major byproduct from the pulp and paper manufacturing processes, and studied the pyrolysis behaviors of these isolated lignin samples at 600 °C under a N2 atmosphere. Three lignin samples were isolated from the Kraft pulping BL of Loblolly pine linerboard grade process (KL, obtained by direct evaporation; L10, obtained by precipitation at pH 10; L3, obtained by precipitation at pH 3), while another three were from the Kraft pulping BL of Loblolly pine bleach grade process (KB, B10, B3). The inorganic elements present in lignin samples were analyzed using an inductively coupled plasma (ICP) analyzer. The KL and KB samples contained a larger amount of inorganic elements, especially Na and S, than did the other lignin samples. Owing to large quantities of inorganic elements, the ash contents in KL and KB were higher than in the precipitated lignin samples (L10, B10, L3, and B3). These inorganic elements have a significant effect on the subsequent pyrolysis process, as a result, more extensive depolymerization of lignin occurred in KL and KB samples, leading to the formation of fewer pyrolysis oils, with lower molecular weights. NMR analyses of pyrolysis oils show that more methoxyl groups and ether bonds were cleaved, resulting in fewer methoxyl groups and aromatic C–O bonds for the KL and KB heavy oil than for the precipitated lignin heavy oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Characterization of Americium and Curium Complexes with the Protein Lanmodulin: A Potential Macromolecular Mechanism for Actinide Mobility in the Environment

Anthropogenic radionuclides, including long-lived heavy actinides such as americium and curium, represent the primary long-term challenge for management of nuclear waste. The potential release of these wastes into the environment necessitates understanding their interactions with biogeochemical compounds present in nature. Here, we characterize the interactions between the heavy actinides, Am 3+ and Cm 3+ , and the natural lanthanide-binding protein, lanmodulin (LanM). LanM is produced abundantly by methylotrophic bacteria, including Methylorubrum extorquens, that are widespread in the environment. We determine the first stability constant for an Am 3+ -protein complex (Am 3 LanM) and confirm the results with Cm 3 LanM, indicating a ~5-fold higher affinity than that for lanthanides with most similar ionic radius, Nd 3+ and Sm 3+ , and making LanM the strongest known heavy actinide-binding protein. The protein’s high selectivity over 243 Am’s daughter nuclide 239 Np enables lab-scale actinide-actinide separations as well as provides insight into potential protein-driven mobilization for these actinides in the environment. The luminescence properties of the Cm 3+ -LanM complex, and NMR studies of Gd 3+ -LanM, reveal that lanmodulin-bound f-elements possess two coordinated solvent molecules across a range of metal ionic radii. Finally, we show under a wide range of environmentally relevant conditions that lanmodulin effectively outcompetes desferrioxamine B, a hydroxamate siderophore previously proposed to be important in trivalent actinide mobility. Overall, these results suggest that natural lanthanide-binding proteins such as lanmodulin may play important roles in speciation and mobility of actinides in the environment; it also suggests that protein-based biotechnologies may provide a new frontier in actinide remediation, detection, and separations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Form factors for semi-leptonic $B_{(s)} \to D_{(s)}^∗\ell \nu_\ell$ decays

Semileptonic $B_{(s)}$ decays are of great phenomenological interestbecause they allow to extract CKM matrix elements or test lepton flavouruniversality. Taking advantage of existing data, we explore extractingform factors for vector final states using the narrow widthapproximation. Based on RBC/UKQCD's set of 2+1 flavour gauge fieldensembles with Shamir domain-wall fermion and Iwasaki gauge fieldaction, we study semileptonic $B_{(s)}$ decays using domain-wallfermions for light, strange and charm quarks, whereas bottom quarks aresimulated with the relativistic heavy quark (RHQ) action. Exploratoryresults for $B_s \to D_s^* \ell \nu_\ell$ are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1982

Chemical composition of cometary nuclei

Observational evidence pertaining to the origin and composition of cometary material is reviewed. Arguments favoring the undifferentiated character of the icy conglomerate are summarized. Theoretical descriptions of the sublimation of a cometary nucleus and the velocity field of the expanding gas are presented and compared with observations. The nature of cometary dust and the atomic abundances of H, C, N, O, and S in the volatile fraction are examined, and data on the dust and volatile fractions are combined to derive elemental abundances. It is shown that O, N, and S in cometary nuclei appear to have essentially cosmic abundances but that both H and C are drastically depleted with respect to the cosmic abundances. The apparent depletion of C by a factor of more than three is discussed. It is suggested that the missing carbon might be hidden in the dust fraction in the form of heavy organic molecules or might have remained in either the primeval solar nebula or interstellar space.

Delsemme, A. H.↗
NASA NTRS2012

Propulsion Progress for NASA's Space Launch System

Leaders from NASA's Space Launch System (SLS) will participate in a panel discussing the progress made on the program's propulsion systems. The SLS will be the nation's next human-rated heavy-lift vehicle for new missions beyond Earth's orbit. With a first launch slated for 2017, the SLS Program is turning plans into progress, with the initial rocket being built in the U.S.A. today, engaging the aerospace workforce and infrastructure. Starting with an overview of the SLS mission and programmatic status, the discussion will then delve into progress on each of the primary SLS propulsion elements, including the boosters, core stage engines, upper stage engines, and stage hardware. Included will be a discussion of the 5-segment solid rocket motors (ATK), which are derived from Space Shuttle and Ares developments, as well as the RS-25 core stage engines from the Space Shuttle inventory and the J- 2X upper stage engine now in testing (Pratt and Whitney Rocketdyne). The panel will respond to audience questions about this important national capability for human and scientific space exploration missions.

May, Todd A.↗
NASA NTRS1993

Potassium isotope cosmochemistry, volatile depletion and the origin of the Earth

We report the first results obtained by our techniques for the precise and accurate determination of the isotopic composition of potassium to constrain the mechanism of volatile element depletion in the formation of the Earth, Moon, and meteorites. Our measurements of delta(K-41) for six chondrites and ten terrestrial rocks attained an average precision of the individual measurement of plus or minus 0.4 percent (2 sigma; plus or minus 0.2 percent/a.m.u. and yield a net chondrite-Earth difference unresolved at the 99 percent confidence limit, delta(K-41) = 0.32 plus or minus 0.35 percent (3 delta). This sets a firm upper limit of 1.3 plus or minus 1.4 percent Rayleigh evaporation of terrestrial potassium (using alpha = square root of 41/39), compared with an observed approximately equals 85 percent chemical depletion of K relative to C1 chondrites. Similar conclusions are reached for the SNC meteorites, Shergotty and Zagami, for 15495 (lunar mare gabbro), and for the eucrite Juvinas. Our conclusion is that direct evaporation of volatile elements from planets (e.g. from silicate vapor atmospheres following giant impact) can be ruled out, and the cause of volatile loss must be sought elsewhere, e.g. nebular processes. Our present findings do not support the conclusions of Hinton et al., the discrepancy to be resolved at a later date. We also find lunar soil 64801, delta(K-41) = +4.99 plus or minus 0.53 percent, to be distinctly heavy in accord with Garner et al.

Humayun, M.↗
NASA NTRS2022

Periodic Solar Wind Structures Observed in Measurements of Elemental and Ionic Composition in situ at L1

Mesoscale periodic structures observed in solar wind plasma serve as an important diagnostic tool for constraining the processes that govern the formation of the solar wind. These structures have been observed in situ and in remote data as fluctuations in proton and electron density. However, only two events of this type have been reported regarding the elemental and ionic composition. Composition measurements are especially important in gaining an understanding of the origin of the solar wind as the composition is frozen into the plasma at the Sun and does not evolve as it advects through the heliosphere. Here, we present the analysis of four events containing mesoscale periodic solar wind structure during which the Iron and Magnesium number density data, measured by the Solar Wind Ion Composition Spectrometer (SWICS)on board the Advanced Composition Explorer spacecraft, are validated at statistically significant count levels. We use a spectral analysis method specifically designed to extract periodic signals from astrophysical time series and apply it to the SWICS 12-minute native resolution dataset. We find variations in the relative abundance of elements with low first ionization potential, mass dependencies, and charge state during time intervals in which mesoscale periodic structures are observed. These variations are linked to temporal or spatial variations in solar source regions and put constraints on the solar wind formation mechanisms that produce them. Techniques presented here are relevant for future, higher-resolution studies of data from new instruments such as Solar Orbiter’s Heavy Ion Sensor.

Irena Gershkovich↗
NASA NTRS1989

Element abundances at high redshift

Abundances of Si(+), S(+), Cr(+), Mn(+), Fe(_), and Zn(+) are considered for two absorption-line systems in the spectrum of the QSO PKS 0528 - 250. Zinc and sulfur are underabundant, relative to H, by a factor of 10 compared to their solar and Galactic interstellar abundances. The silicon-, chromium-, iron-, and nickel-to-hydrogen ratios are less than the solar values and comparable to the local interstellar ratios. A straightforward interpretation is that nucleosynthesis in these high-redshift systems has led to only about one-tenth as much heavy production as in the gas clouds around the sun, and that the amount of the observed underabundances attributable to grain depletion is small. The dust-to-gas ratio in these clouds is less than 8 percent of the Galactic value.

Meyer, David M.↗
DOE OSTI2023

Periplasmic biomineralization for semi-artificial photosynthesis

Semiconductor-based biointerfaces are typically established either on the surface of the plasma membrane or within the cytoplasm. In Gram-negative bacteria, the periplasmic space, characterized by its confinement and the presence of numerous enzymes and peptidoglycans, offers additional opportunities for biomineralization, allowing for nongenetic modulation interfaces. We demonstrate semiconductor nanocluster precipitation containing single- and multiple-metal elements within the periplasm, as observed through various electron- and x-ray-based imaging techniques. The periplasmic semiconductors are metastable and display defect-dominant fluorescent properties. Unexpectedly, the defect-rich (i.e., the low-grade) semiconductor nanoclusters produced in situ can still increase adenosine triphosphate levels and malate production when coupled with photosensitization. We expand the sustainability levels of the biohybrid system to include reducing heavy metals at the primary level, building living bioreactors at the secondary level, and creating semi-artificial photosynthesis at the tertiary level. The biomineralization-enabled periplasmic biohybrids have the potential to serve as defect-tolerant platforms for diverse sustainable applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

Advanced Spacecraft Designs in Support of Human Missions to Earth's Neighborhood

NASA's strategic planning for technology investment draws on engineering studies of potential future missions. A number of hypothetical mission architectures have been studied. A recent study completed by The NASA/JSC Advanced Design Team addresses one such possible architecture strategy for missions to the moon. This conceptual study presents an overview of each of the spacecraft elements that would enable such missions. These elements include an orbiting lunar outpost at lunar L1 called the Gateway, a lunar transfer vehicle (LTV) which ferries a crew of four from the ISS to the Gateway, a lunar lander which ferries the crew from the Gateway to the lunar surface, and a one-way lunar habitat lander capable of supporting the crew for 30 days. Other supporting elements of this architecture discussed below include the LTV kickstage, a solar-electric propulsion (SEP) stage, and a logistics lander capable of re-supplying the 30-day habitat lander and bringing other payloads totaling 10.3 mt in support of surface mission activities. Launch vehicle infrastructure to low-earth orbit includes the Space Shuttle, which brings up the LTV and crew, and the Delta-IV Heavy expendable launch vehicle which launches the landers, kickstage, and SEP.

Fletcher, David↗
NASA NTRS2016

Rare Earth Element Partitioning in Lunar Minerals: An Experimental Study

The partitioning behavior of rare earth elements (REE) between minerals and melts is widely used to interpret the petrogenesis and geologic context of terrestrial and extra-terrestrial samples. REE are important tools for modelling the evolution of the lunar interior. The ubiquitous negative Eu anomaly in lunar basalts is one of the main lines of evidence to support the lunar magma ocean (LMO) hypothesis, by which the plagioclase-rich lunar highlands were formed as a flotation crust during differentiation of a global-scale magma ocean. The separation of plagioclase from the mafic cumulates is thought to be the source of the Eu depletion, as Eu is very compatible in plagioclase. Lunar basalts and volcanic glasses are commonly depleted in light REEs (LREE), and more enriched in heavy REEs (HREE). However, there is very little experimental data available on REE partitioning between lunar minerals and melts. In order to interpret the source of these distinctive REE patterns, and to model lunar petrogenetic processes, REE partition coefficients (D) between lunar minerals and melts are needed at conditions relevant to lunar processes. New data on D(sub REE) for plagioclase, and pyroxenes are now available, but there is limited available data for olivine/melt D(sub REE), particularly at pressures higher than 1 bar, and in Fe-rich and reduced compositions - all conditions relevant to the lunar mantle. Based on terrestrial data, REE are highly incompatible in olivine (i.e. D much less than 1), however olivine is the predominant mineral in the lunar interior, so it is important to understand whether it is capable of storing even small amounts of REE, and how the REEs might be fractionatied, in order to understand the trace element budget of the lunar interior. This abstract presents results from high-pressure and temperature experiments investigating REE partitioning between olivine and melt in a composition relevant to lunar magmatism.

McIntosh, E. C.↗
DOE OSTI2026

Properties of Heavy Cosmic Nuclei Phosphorus, Chlorine, Argon, Potassium, and Calcium: Results from the Alpha Magnetic Spectrometer

We report the unique properties of cosmic phosphorus (P), chlorine (Cl), argon (Ar), potassium (K), and calcium (Ca) fluxes in the GV to TV rigidity range collected by the Alpha Magnetic Spectrometer (AMS) on the International Space Station. With a total of one million events collected over 13.5 years, we observed that the rigidity dependencies of the five fluxes are well described by the sums of a primary cosmic ray component and a secondary cosmic ray component. The abundance ratios of all five elements to Si at the source are accurately determined independent of cosmic ray propagation. The source abundance of Ar and Ca (even-𝑍 elements) is larger than P, Cl, and K (odd-𝑍 elements). The secondary components of the P and the Cl fluxes are each ∼1/3 of the F flux, and the secondary components of the Ar, K, and Ca fluxes are each ∼1/2 of the F flux. The twenty elements measured by AMS, from He to Ca and Fe, can be categorized into four classes, two primary and two secondary, based on their rigidity dependence.

cosmic ray acceleration↗
DOE OSTI2026

Averages of 𝑏-hadron, 𝑐-hadron, and 𝜏-lepton properties as of 2023

This paper reports world averages of measurements of 𝑏-hadron, 𝑐-hadron, and 𝜏-lepton properties obtained by the Heavy Flavor Averaging Group using results available before October 2023. In rare cases, significant results obtained several months later are also used. For the averaging, common input parameters used in the various analyses are adjusted (rescaled) to common values, and known correlations are taken into account. The averages include branching fractions, lifetimes, neutral meson mixing parameters, 𝐶⁢𝑃 violation parameters, parameters of semileptonic decays, and Cabibbo-Kobayashi-Maskawa matrix elements.

Bottom quark production↗
NASA NTRS1984

Advanced launch vehicles

Vehicles capable of lifting very large and heavy payloads into low earth orbit (LEO) will be needed to support certain large-scale space missions being considered for the late 1990-2000 time period. These missions include the support of strategic national commitments, large space power systems, and interplanetary and lunar exploration. Nearer term missions will utilize the Space Shuttle and its direct derivatives, the Shuttle-Derived Vehicles (SDV), currently being defined under NASA and DOD sponsored studies. A conceptual design of a Heavy Lift Launch Vehicle (HLLV) that will lift a half million pounds to low earth orbit is presented. Design alternatives and key system design problems and issues are discussed. The new developments required, such as a new large liquid booster engine and Space Shuttle Main Engine (SSME) modifications, are identified. New candidate launch locations and launch facility requirements are also discussed. The commonality and utilization of the booster stage 'elements' as a liquid booster for a 'growth' Space Shuttle are conceptually defined.

Marshall, W. R.↗
NASA NTRS2008

Friction-Stir Welding - Heavy Inclusions in Bi-metallic welds of Al 2219/2195

Heavy Inclusions (HI) were detected for the first time by radiographic examination in aluminum alloy 2219forging/2195plate (advancing/retreating side) Friction Sir Welds (FSW) for the Space Shuttle External Tank (ET) Program. Radiographic HI indications appear as either small (approx.0.005"-0.025") individual particles or clusters of small particles. Initial work was performed to verify that the HI was not foreign material or caused by FSW pin tool debris. That and subsequent elemental analysis determined that the HI were large agglomerations of Al2Cu (theta phase), which is the strengthening precipitate in Al2219. A literature search on that subject determined that the agglomeration of phase has also been found in Al2219 bead on plate FSW [Ref. 1]. Since this was detected in ET space flight hardware, an investigative study of the effect of agglomerated theta phase particles in FSW Al2219f/2195p was performed. Numerous panels of various lengths were welded per ET weld procedures and radiographically inspected to determine if any HI was detected. Areas that had HI were sampled for room temperature and cyclic cryogenic (-423F) tensile testing and determined no significant adverse affect on mechanical properties when compared to test specimens without HI and historical data. Fracture surface examination using the Scanning Electron Microscope (SEM) revealed smaller phase agglomerations undetectable by radiographic inspection dispersed throughout the Al2219f/2195p FSW. This indicates that phase agglomeration is inherent to the Al2219f/2195p FSW process and only rarely creates agglomerations large enough to be detected by radiography. HI has not been observed in FSW of plate to plate material for either Al2219 or AL2195.

Rietz, Ward W., Jr.↗