Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

A mass–momentum consistent coupling for mesh-adaptive two-phase flow simulations

Here, we present a novel mass-momentum consistent coupling between a geometric volume-of-fluid scheme and an incompressible flow solver with differing directional-splitting approaches. The advection of the volume fraction is performed using a direction-split algorithm, whereas the momentum advection algorithm uses a traditional unsplit, fractional-step approach. Both algorithms employ finite-volume discretizations based on Cartesian meshes. In solving the mass-momentum consistency problem, momentum fluxes at the cell faces are weighted by the density fluxes based on the already advected volume fraction. The success of our approach lies on introducing a Favre-averaged velocity interpolation at the liquid/gas interface along with a minmod slope limiter. Mesh-convergence studies show that when the minmod slope limiter is used, the two-phase solver retains an accuracy between first and second order, but when a purely upwind scheme is considered, its accuracy drops to first order. Finally, after considering several validation problems, the solver is shown to agree well with reference numerical and experimental data while retaining its robustness and efficiency.

97 MATHEMATICS AND COMPUTING↗

Woven ceramic matrix composite surrogate model based on physics-informed recurrent neural network

A recurrent neural network (RNN) based surrogate model is developed to emulate the nonlinear constitutive behavior of woven ceramic matrix composites (CMCs) driven by matrix damage at multiple length scales. Physics-informed constraints are introduced into the surrogate model through regularization to ground the prediction in physics and improve its predictive capabilities. Training data is generated using the multiscale generalized method of cells (MSGMC) approach coupled with a matrix damage model. This coupling permits simulating the nonlinear behavior of woven CMCs based on constituent response at the micro-, meso-, and macroscales. The multiscale repeating unit cell is loaded under non-monotonic conditions including multiple load / unload cycles and tension / compression. The fiber volume fraction as well as the intra- and intertow void volume fractions are also varied in the generation of training data. Therefore, the RNN-based surrogate model is tasked with predicting, as a function of variable input strain sequence and fiber and void volume fractions, the resulting stress versus strain response while satisfying physical constraints such as positive semi-definiteness of the tangent stiffness matrix and linear elastic unloading. Further, the trained surrogate model effectively matches the stress versus strain response and successfully predicts the tangent modulus throughout the loading regime. Neural network based surrogate models can offer efficient alternatives to running computationally intensive multiscale material models to simulate the nonlinear response of large structural models. Therefore the presented work provides evidence towards the feasibility of developing, training, and running such models for CMCs with complex architectures, nonlinear multiaxial material response, and under non-monotonic loading conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An acidic polysaccharide (AGC3) isolated from North American ginseng ( Panax quinquefolius ) suspension culture as a potential immunomodulatory nutraceutical

Polysaccharides isolated from Panax quinquefolius roots are widely used as nutraceuticals due to their immunomodulatory properties. Despite their popularity, several challenges exist in isolating ginseng root polysaccharides such as batch-to-batch structural inconsistencies and bacterial endotoxin contamination. A plant tissue culture-based platform offers a potential solution to isolate natural polysaccharide fractions with consistent chemical characteristics and reduced endotoxin content. In this study, an acidic polysaccharide fraction (AGC3) with immunomodulatory properties was isolated from Panax quinquefolius suspension cultures. The heterogeneous fraction (molecular weight: 4.81 and 32.14 kDa), purified by anion exchange chromatography, was predominantly composed of galactose (>60%) along with the presence of rhamnose, arabinose, glucose, glucuronic acid and galacturonic acid. The major glycosidic linkages were found to be t-Galp (47.7%), 4-Galp (15.6%), 2,4-Rhap (8.1%), 6-Galp (8.1%) and 4-GalAp (6.8%). Structural analyses indicated the presence of a pectic rhamnogalacturonan I polysaccharide in AGC3. AGC3 significantly (p < 0.05) stimulated RAW 264.7 murine macrophage cells and primary murine splenocytes by enhancing the production of several immunomodulatory mediators such as IL-6, TNF-α, GM-CSF and MCP-1. The results also indicated the putative roles of NF-κB (p65/RelA) and MAPK (p38) signaling pathways in the immunostimulatory response. Additionally, AGC3 induced murine splenocyte proliferation, another major indicator of immunostimulation. Overall, AGC3 has the potential to be used as an immunostimulatory nutraceutical.

59 BASIC BIOLOGICAL SCIENCES↗

The gallium isotopic composition of the Moon

Here, in this study, we present new Ga isotope data from a suite of 28 mare basalts and lunar highland rocks. The δ 71 Ga values of these samples range from -0.10 to +0.66‰ (where δ 71 Ga is the relative difference between the 71 Ga/ 69 Ga ratio of a sample and the Ga-IPGP standard), which is an order of magnitude more heterogeneous than δ 71 Ga values in terrestrial magmatic rocks. The cause of this isotopic heterogeneity must be established to estimate the bulk δ 71 Ga value of the Moon. In general, low-Ti basalts and ferroan anorthosite suite (FAS) rocks have δ 71 Ga values that are lower than high-Ti basalts and KREEP-rich rocks. The observation that rocks derived from later forming LMO cumulates have higher δ 71 Ga values suggests that Ga isotopes are fractionated by processes that operate within the chemically evolving LMO, rather than localized degassing or volatile redistribution. Correlations between indices of plagioclase removal from the LMO (e.g. Eu/Eu*) with Ga isotope ratios suggest that a Δ 71 Ga plagioclase-melt of -0.3‰, (where Δ 71 Ga plagioclase-melt is the isotopic fractionation associated with crystallization of plagioclase from a melt), could drive the observed isotopic fractionation in high-Ti mare basalts and KREEP-rich rocks. This would be consistent with the observation that FAS rocks have δ 71 Ga values that are lower than mare basalts. However, the addition of KREEP-like material into the mare basalt source regions would not contribute enough Ga to perturb the isotopic composition outside of analytical uncertainty. Thus, basalts derived from early formed LMO cumulates such as those from Apollo 15, would preserve light Ga isotopic compositions despite containing modest amounts of urKREEP. We estimate that the δ 71 Ga value of the LMO was ~0.14‰ prior to the onset of plagioclase crystallization and extraction. Whether this δ 71 Ga value is representative of the initial BSM cannot be ascertained from the current dataset. It remains plausible that the Moon accreted with a heavier Ga isotopic composition than the Earth. Alternatively, the Moon and Earth could have accreted with similar isotopic compositions (BSE = 0.00 ± 0.06‰, Kato et al., 2017) and volatile loss drove the LMO to higher δ 71 Ga values prior to formation of the lunar crust.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ deformation of antigorite-olivine two-phase mixtures: Implications for dynamics and seismic anisotropy in the mantle wedge

Water released from hydrous minerals in subducting slabs reacts with the overlying plate, resulting in widespread serpentinization in the mantle wedge. Deformation of serpentinized peridotites has been invoked to explain forearc seismic anisotropy, yet studies of the mechanical properties and deformation behaviors of serpentine-bearing multiphase aggregates remain limited. Here we deformed olivine-antigorite mixtures containing 70, 50, and 20 vol.% of antigorite at 2.5 – 7.6 GPa, 673 K and strain rates of ∼10 –5 –10 –4 s –1 . Elasto-viscoplastic self-consistent simulations, constrained by synchrotron X-ray diffraction (XRD) data, were used to estimate lattice strain, stress–strain partitioning, crystallographic preferred orientations (CPO) development, and aggregate strength. Selected run products were also analyzed by electron backscatter diffraction for comparison with the CPO results obtained from XRD experiments. We found olivine transitions from A- or B-type to C-type when antigorite fraction drops to 20 vol.%, coinciding with a microstructural change from interconnected weak layers to a load-bearing framework (LBF). An additional run on a sample Atg50/Ol50 with preexisting microstructures suggested the formation of LBF was promoted by these microstructures, although the preexisting antigorite CPO has been overprinted at 20.8 % strain and could be erased completely by subsequent deformation in nature. Estimated viscosity of the two-phase mixtures suggests that low-degree serpentinization (≤20 %) in the mantle wedge may increase the strength of olivine-rich peridotite and hinder slab-mantle decoupling, whereas high-degree serpentinization (≥50–70 %) weakens the peridotite and favors decoupling if sufficient viscosity contrast (>10) develops. Seismic anisotropy shows a nonlinear dependence on antigorite fraction: antigorite CPO governs the anisotropy of the mixtures with ≥50 vol.% antigorite, whereas olivine CPO dominates at low fractions (∼20 vol.%). The presence of pre-existing microstructures reduces seismic anisotropy of the deformed mixtures, however the persistence of pre-existing CPO in actively subducting slabs remains uncertain, making their significance over geological timescales questionable.

Crystallographic preferred orientation↗

The effects of turbulence on the flame structure and NO formation of ammonia turbulent premixed combustion at various equivalence ratios

Ammonia is carbon-free and is regarded as a potential fuel to address global warming issues. Here, in this work, three-dimensional direct numerical simulations (DNS) of ammonia/air turbulent premixed flames were performed to explore the influence of turbulence and equivalence ratio on the flame structure and NO formation characteristics. Two equivalence ratios were considered, i.e. Φ=0.9 and Φ=1.1. The general flame structures were presented and species distributions were examined. The NO mass fraction was found to be the highest in the product for the lean case and in the reaction zone for the rich case. The conditional mean values of species mass fractions and reaction rates were compared with those of the unstrained and strained laminar premixed flames to explore how well the laminar flame structures can approach those of the turbulent flame. The budget analysis of the species transport equations showed that turbulent diffusion plays an important role in species transport. The turbulent diffusivity D T was estimated using the gradient hypothesis based on the DNS data. Various laminar flame simulations with different diffusivities were carried out. It was shown that the conditional means of the DNS agree well with those of the laminar flames including D T in the transport property calculation. The global and local NO formation characteristics were investigated. It was found that the mean NO production conditioned on the progress variable is lower compared with the corresponding laminar flame in the rich case. However, the relative contributions from various NO pathways are rarely affected by turbulence. The NO mass fraction is higher in negative curvature regions compared with positive curvature regions of the flame surface for the rich case, which is due to the preferential diffusion of H 2 and other radicals and the enhanced NO pathways in negatively curved regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrotreating pine-derived catalytic fast pyrolysis oil to jet fuel: Process durability and impact of operating conditions

Hydrotreating woody biomass-derived catalytic fast pyrolysis (CFP) oil to jet fuel has the potential to enhance energy security due to the large abundance of forest and woody resources. CFP oil produced from pine over ZSM-5 was hydrotreated over sulfided NiMo/Al 2 O 3 for 410 h to study the impact of hydrotreating conditions (pressure, temperature, and weight hourly space velocity (WHSV)). The degree of deoxygenation remained high across the tested hydrotreating conditions, and the products contained < 0.01 wt% oxygen. Increasing hydrotreating pressure from 84 to 125 bar enhanced hydrogenation of aromatic rings and the formation of cycloalkanes and increasing the temperature from 385 to 400 degrees C enhanced cracking and the formation of jet-range molecules. Decreasing the weight hourly space velocity from 0.2 to 0.1 g/(g cat h) further enhanced cracking and led to higher gasoline- and lower jet fuel-range fractions. The highest jet fuel fraction (49 wt%) was obtained at 400 degrees C, 125 bar, 0.2 g/(g cat h) WHSV. CFP oils produced from pine over phosphorous-modified ZSM-5 were hydrotreated at this condition for 588 h to investigate the process durability. The hydrogenation performance of the catalyst gradually stabilized in approximately 300 h after which the product composition remained constant. Of the final hydrotreated CFP oil, 53 wt% fell in the jet fuel range with most of the tested fuel properties meeting ASTM D4054 and/or ASTM D7566 specifications. The freeze points were < -50 degrees C vs. guideline of < -40 degrees C and the viscosities at -20 degrees C were 3.8-4.1 mm 2 /s vs guideline of 8 mm 2 /s. Increasing the fraction of cycloalkanes could increase the cetane number and heating value, which did not meet the guidelines.

09 BIOMASS FUELS↗

Influence of physical and chemical hydrology on bioremediation of a U-contaminated aquifer informed by reactive transport modeling incorporating 238 U/ 235 U ratios

Microbially-catalyzed reductive immobilization of aqueous uranium (U) as a solid phase has been proposed as a U remediation technique. Both laboratory and field experiments have demonstrated that this reduction reaction alters the 238 U/ 235 U ratio, producing a 238 U-enriched U(IV) solid. In contrast, other major U reactive transport processes fractionate these isotopes much less. This suggests the potential to quantify the extent of bioreduction occurring in groundwater containing U using the 238 U/ 235 U ratio, which would substantially improve upon current practices largely relying on U concentration measurements alone. Current reactive transport models for uranium dynamics include only concentration measurements, which are strongly influenced by highly coupled reactive transformation and aqueous transport processes. The complex physical and chemical behavior of U potentially compromises such quantitative analysis of U storage and release. Here we report the first numerical reactive transport model which explicitly incorporates variations in the 238 U/ 235 U ratio of U and demonstrates improved interpretation of the principal chemical reactions and groundwater transport processes affecting the subsurface mobility and distribution of this widespread contaminant. Recent U bioreduction studies performed in a contaminated aquifer in Rifle, Colorado, USA applied Rayleigh distillation models to interpret U stable isotope fractionation observed as a result of acetate amendment. These simplified models were unable to resolve the spatiotemporal pattern of U isotope fractionation recorded in the aqueous solutes. Here, we employ the multi-component, isotope-enabled CrunchTope reactive transport software to interpret these measured U isotope ratios, and demonstrate accurate reproduction of observed trends in both geochemistry and 238 U/ 235 U ratios for two consecutive years of field experiments. Overall, our results indicate that accurately modeling both the U concentration and isotope ratio distributions greatly constrains the parameter space of the model. We find that the transport properties of U in the Rifle aquifer are governed by the presence of low-permeability regions, which the isotopes are uniquely sensitive to. When U reduction is spatially constrained by these low-permeability regions, the shift in the 238 U/ 235 U ratio becomes more muted. Accurate modeling of observed U isotope ratios thus provides a powerful means to better understand bioremediation, and the current study serves to advance the application of this novel method.

238U/235U↗

Constraining the behavior of gallium isotopes during evaporation at extreme temperatures

Renewed interest in gallium isotope systematics has stemmed from the fact that Ga is moderately volatile and is hypothesized to undergo kinetic fractionation during evaporation. In this work, we present the first Ga isotope data from terrestrial volatile depleted samples including a suite of experimentally heated rhyolitic soils, fallout melt glass, and splash-form tektites from the Australasian strewn field (hereafter termed australite tektites). The Ga in these samples is isotopically heavy compared to Ga in terrestrial basalts and estimates for the composition of the bulk silicate Earth (BSE). For each sample suite the isotopic fractionation of Ga scales with the degree of Ga depletion, consistent with isotopic fractionation caused by evaporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and theoretical determinations of hydrogen isotopic equilibrium in the system CH 4 —H 2 —H 2 O from 3 to 200°C

The stable isotopic composition of methane (CH 4 ) is commonly used to fingerprint natural gas origins. Over the past 50 years, there have been numerous proposals that both microbial and thermogenic CH 4 can form in or later attain hydrogen isotopic equilibrium with water (H 2 O) and carbon isotopic equilibrium with carbon dioxide (CO 2 ). Evaluation of such proposals requires knowledge of the equilibrium fractionation factors between CH 4 and H 2 O or CO 2 at the temperatures where microbial and thermogenic CH 4 form in or are found in the environment, which is generally less than 200°C. Experimental determinations of these fractionation factors are only available above 200°C, requiring extrapolation of these results beyond the calibrated range or the use of theoretical calculations at lower temperatures. Here, we provide a calibration of the equilibrium hydrogen isotopic fractionation factor for CH 4 and hydrogen gas (H 2 ) ( D α CH4(g)–H2(g) ) based on experiments using γ-Al 2 O 3 and Ni catalysts from 3 to 200°C. Results were regressed as a 2 nd order polynomial of 1000 × ln D α CH4(g)–H2(g) vs. 1/T (K -1 ) yielding: 1000 × l n D α C H 4 ( g ) - H 2 ( g ) = 3.5317 × 10 7 T 2 + 2.7749 × 10 5 T - 179.48 We combine this calibration with previous experimental determinations of hydrogen isotope equilibrium between H 2 , H 2 O(g), and H 2 O(l) and we provide an interpolatable experimental calibration of 1000 × ln D α CH4(g)–H2O(l) from 3 to 200°C. Our resulting 4th order polynomial is the following equation: 1000 × l n D α C H 4 ( g ) - H 2 O l = - 7.9443 × 10 12 T 4 + 8.7772 × 10 10 T 3 - 3.4973 × 10 8 T 2 + 5.4398 × 10 5 T - 382.05 At 3°C, the value from our calibration differs by 93‰ relative to what would be calculated based on the extrapolation of the only experimental calibration currently available to temperatures below its calibrated range (lowest temperature of 200°C; Horibe and Craig, 1995). We additionally provide new theoretical estimates of hydrogen isotopic equilibrium between CH 4 (g), H 2 (g), and H 2 O(g) and carbon isotopic equilibrium between CH 4 (g) and CO 2 (g) using Path Integral Monte Carlo (PIMC) calculations. Our PIMC calculations for hydrogen isotopic equilibrium between CH 4 and H 2 agree 1:1 with our experiments. Finally, we compile carbon and hydrogen isotopic measurements of CH 4 , CO 2 , and H 2 O from various environmental systems and compare observed differences between carbon and hydrogen isotopes to those expected based on isotopic equilibrium. We find that isotopic compositions of some microbial gases from marine sedimentary, coalbed, and shale environments are consistent with those expected for CH 4 H 2 O(l) hydrogen and CH 4 CO 2 carbon isotopic equilibrium. In contrast, microbial terrestrial and pure culture gases are not consistent with both CH 4 H 2 O(l) hydrogen and CH 4 CO 2 carbon isotopic equilibrium. Overall, these results are explained qualitatively using previously developed conceptual models that link free energy gradients available to microorganisms to the degree that their enzymes can promote isotope-exchange reactions between CH 4 , CO 2 , and H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isotope effects at the origin of life: Fingerprints of the Strecker synthesis

We report strecker synthesis creates α-amino acids from prebiotically plausible substrates (cyanide, ammonia, and aldehydes) and is widely hypothesized to be a key mechanism in the chemistry that led to life on Earth and on other planets. To better constrain the synthetic environments and precursors of abiotic α-amino acids, and to determine unique signatures of abiogenic amino acids, we measured the molecular-averaged and site-specific carbon and nitrogen isotope effects for the Strecker synthesis of alanine. The reaction steps of the Strecker synthesis can be divided into two groups: an initial series of reversible amination and nitrile-addition reactions (‘equilibration’) and a second series of irreversible hydrolysis reactions (‘hydrolysis’). The equilibration of cyanide, acetaldehyde, and ammonia with the intermediate, α-aminopropionitrile (α-APN), has a measured 55.1‰ equilibrium nitrogen isotope effect between the 15 N-rich amine nitrogen in α-aminopropionitrile and the 15 N-poor ammonia and a 20.0‰ equilibrium carbon isotope effect between the 13 C-poor C-2 site in α-aminopropionitrile and the 13 C-rich carbonyl carbon in acetaldehyde. The first irreversible hydrolysis step is inferred to have an up to 10‰ normal carbon fractionation (i.e., faster for 12 C, slower for 13 C) for the whole molecule, but it also has one or more side reactions that deplete the reactive α-APN reservoir by up to 15‰. The second hydrolysis step has a 15.4‰ normal kinetic isotope effect on the amide (C-1) site of alaninamide, which becomes the carboxyl site of alanine. Other α-amino acids will likely experience similar nitrogen isotope fractionations between ammonia and their amine sites, and similar carbon isotope fractionations between the carbonyl carbon in reactant aldehydes or ketones and the intermediate α-aminonitrile, and between cyanide and the carboxyl site. Therefore, these isotope effects allow us to predict the carbon and nitrogen isotopic contents and intramolecular structures of α-amino acids formed by Strecker synthesis based on their substrates’ isotopic compositions, or to infer the isotopic compositions of substrates from which amino acids formed, for example in the case of the amino-acid-rich carbonaceous chondrites. The site-specific C and N isotopic compositions of amino acids formed by Strecker chemistry contrast with those typical of terrestrial biosynthetic amino acids, so these data also provide a means of discriminating between biogenic and abiogenic α-amino acids.

58 GEOSCIENCES↗

Nickel-rich, volatile depleted iron meteorites: Relationships and formation processes

Ungrouped iron meteorites Tishomingo, Willow Grove, and Chinga, and group IVB iron meteorites, are Ni-rich. Similarities include enrichments of 10–100 × CI for some refractory siderophile elements, and equivalent depletions in more volatile siderophile elements. Superimposed on the overall enrichment/depletion trend, certain siderophile elements (P, W, Fe, Mo) are depleted relative to elements of similar volatility. All three ungrouped irons derive from parent bodies formed in the early Solar System. Willow Grove and Chinga are characterized by cosmic ray exposure corrected 182 W/ 184 W consistent with metal-silicate segregation on their parent bodies within 1–3 Myr of Solar System formation, within the age range determined for segregation of magmatic iron meteorite parent bodies, including group IVB irons. Tishomingo is characterized by a younger model age 4–5 Myr subsequent to Solar System formation, reflecting either late stage melting resulting from 26 Al decay, or an impact resetting. The discovery of stishovite in Tishomingo, indicating exposure to a minimum shock pressure of 8–9 GPa, is consistent with the latter. Stishovite in Tishomingo and chromite included in troilite-daubréelite in IVB irons allows oxygen isotopic composition comparison between these meteorites. Different mass independent oxygen isotopic compositions of IVB irons and Tishomingo indicate genetically distinct parent bodies. By contrast, mass independent Mo isotopic compositions overlap within analytical uncertainties, indicating a similar, carbonaceous chondrite (CC) type genetic heritage. Molybdenum and 183 W isotopic data for Chinga and Willow Grove indicate derivation from CC type parent bodies. Willow Grove shares Mo and 183 W isotopic compositions with the Ni-rich South Byron Trio (SBT) grouplet and the Milton pallasite. These Ni-rich meteorites likely formed in the same general nebular environment as other CC planetesimals, likely the outer Solar System. Highly siderophile element (HSE) abundances of Willow Grove and Tishomingo are similar to some IVB meteorites, consistent with formation by moderate degrees of fractional crystallization from initial metallic melts with low S and P, and modestly fractionated HSE. The comparable HSE abundances of Tishomingo and Willow Grove to some IVB irons, yet substantially higher Ni concentrations, indicate formation on parent bodies with lower bulk HSE abundances or HSE concentration in proportionally smaller volumes of metal. HSE abundances in Chinga are considerably lower than in IVB irons, highly fractionated, and processes responsible for these remain elusive. For IVB irons and these ungrouped irons, high temperature condensation likely dominated the enrichment and depletion of the refractory and volatile siderophile elements, respectively. Parent body degassing may have also played a role. Relative depletion of volatile siderophile elements is not, however, a universal feature of high-Ni meteorites. The SBT and Milton pallasite are Ni-rich, but less depleted in the more volatile siderophile elements. Nickel enrichment was likely driven by oxidation of Fe metal during parent body accretion or core segregation. Oxidation of the Tishomingo and Willow Grove parent bodies may have occurred at ~ IW + 1, indicated by relative Mo and W depletions due to metal/water reaction during differentiation. Late-stage reduction, indicated by the presence of Cr-bearing sulfides in Tishomingo and IVB irons, may have resulted from exhaustion of the oxidant.

36 MATERIALS SCIENCE↗

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 2: Experimental determination of hydrogen isotopic equilibrium for ethane-H2 from 30 to 200 °C and propane-H2 from 75 to 200 °C

The stable isotopic compositions of light n-alkanes, including methane, ethane, and propane, are often used to identify the sources and thermal maturity of natural gas samples. Though stable isotopic compositions of these molecules are commonly assumed to be controlled by kinetic isotope effects, recent studies have proposed both carbon and hydrogen isotopic equilibrium may also occur in some samples. Assessing whether samples are in isotopic equilibrium requires knowledge of light alkane equilibrium fractionation factors over geologically relevant temperatures for formation and storage (up to ∼300 °C). In this study, we report experimental results of hydrogen isotopic equilibrium between ethane and H2 from 30 to 200 °C and propane and H2 from 75 to 200 °C. We compare these results with high-level theoretical calculations and provide a preferred polynomial fit to describe equilibrium fractionation factors. Comparison of these fractionation factors with a compilation of ∼500 compiled environmental gas samples supports the proposal that many (∼50%) of these natural gas samples exhibit hydrogen isotopic compositions consistent with having formed in or attained methane-ethane-propane hydrogen isotopic equilibrium over geologically relevant temperatures for formation and storage (50–300 °C).

Turner, Andrew C↗

Chronological changes in soil biogeochemical properties of the glacier foreland of Midtre Lovénbreen, Svalbard, attributed to soil-forming factors

We report that Glacier forelands provide an excellent opportunity to investigate vegetation succession and soil development along the chronosequence; however, there are few studies on soil biogeochemical changes from environmental factors, aside from time. This study aimed to investigate soil development and biogeochemical changes in the glacier foreland of Midtre Lovenbreen, Svalbard, by considering various factors, including time. Eighteen vegetation and soil variables were measured at 38 different sampling sites of varying soil age, depth, and glacio-fluvial activity. Soil organic matter (SOM) was quantitatively measured, and the compositional changes in SOM were determined following size-density fractionation. In the topsoil, the soil organic carbon (SOC) and total nitrogen (N) content was found to increase along the soil chronosequence and were highly correlated with vegetation-associated variables. These findings suggest that plant-derived material was the main driver of the light fraction of SOM accumulation in the topsoil. The heavy fractions of SOM were composed of microbially transformed organic compounds, eventually contributing to SOM stabilization within short 90-yr deglaciation under harsh climatic conditions. In addition to time, the soil vertical profiles showed that other environmental parameters, also affected the soil biogeochemical properties. The high total phosphorous (P) content and electrical conductivity in the topsoil were attributed to unweathered subglacial materials and a considerable amount of inorganic ions from subglacial meltwater. The high P and magnesium content in the subsoil were attributed to parent materials, while the high sodium and potassium content in the surface soil were a result of sea-salt deposition. Glacio-fluvial runoff hampered ecosystem development by inhibiting vegetation development and SOM accumulation. This study emphasizes the importance of considering various soil-forming factors, including parent/subglacial materials, aeolian deposition, and glacio-fluvial runoff, as well as soil age, to obtain a comprehensive understanding of the ecosystem development in glacier forelands.

glacio-fluvial runoff↗

Land use-land cover gradient demonstrates the importance of perennial grasslands with intact soils for building soil carbon in the fertile Mollisols of the North Central US

The impact of land use change and agricultural management on the cycling of soil organic carbon (SOC) is not well understood, limiting our ability to manage for, and accurately model, soil carbon changes at both local and regional scales. To address this issue, here we combined long-term soil incubations with acid-hydrolysis and dry combustion to parse total SOC (C t ) into three operationally defined SOC pools (active, slow, and recalcitrant) from 9 long-term sites with varying land uses on current and former tallgrass prairie soil. Land uses represented a gradient of soil disturbance histories including remnant prairie, restored prairie, grazed pasture, annual crop rotations, and continuous maize. Dry combustion was used to estimate total carbon (C t , physical), while acid hydrolysis of both the active (C a ) and slow (C s ) pools was used to estimate a recalcitrant carbon pool (C r , chemical). Non-linear modeling of CO 2 efflux data from the long-term incubations was then used to estimate C a , and the decomposition rates of both C a and C s (k a and k r , biological). The size of the slow pools C s was then defined mathematically as C t- (C a + C r ). Remnant prairie had the highest C t , while cool-season pasture and a 35-y-old restored prairie had higher C t than the other agricultural systems. All agricultural systems, including pasture, had the highest fraction of C t as C r (~50%), whose mean residence time (MRT) in these soils is ≥500 years (Paul et al., 2001a) demonstrating that this fraction persists, while the more labile fractions were lost over the course of a few months (C a ) to a few decades (C s ) as a result of tillage-intensive agriculture. The two- to four-decade MRT time of C s indicated a pool likely to be more responsive to the 20 to 40 years of land-use practices used at some of the sites. The C s pool was largest in the remnant- and 35-y-old prairies indicating significant C accrual and stabilization compared to the agricultural ecosystems. Interestingly, the remnant prairie maintained the highest C a pool as well, demonstrating the strong connection between the quantity of fresh C inputs and the potential for long-term C stabilization and accrual. The accumulation of C in active (≈labile) pools as a first step toward long-term stabilization highlights the tenuous nature of early carbon gains, which can be quickly lost in response to climate change or poor management.

54 ENVIRONMENTAL SCIENCES↗

Structural characterization of strawberry pomace

Strawberries are a nutrient dense food rich in vitamins, minerals, non-nutrient antioxidant phenolics, and fibers. Strawberry fiber bioactive structures are not well characterized and limited information is available about the interaction between strawberry fiber and phenolics. Therefore, we analyzed commercial strawberry pomace in order to provide a detailed carbohydrate structural characterization, and to associate structures with functions. The pomace fraction, which remained after strawberry commercial juice extraction, contained mostly insoluble (49.1 % vs. 5.6 % soluble dietary fiber) dietary fiber, with pectin, xyloglucan, xylan, β-glucan and glucomannan polysaccharides; glucose, fructose, xylose, arabinose, galactose, fucose and galacturonic acid free carbohydrates; protein (15.6 %), fat (8.34 %), and pelargonidin 3-glucoside (562 μg/g). Oligosaccharides from fucogalacto-xyloglucan, methyl-esterified rhamnogalacturonan I with branched arabinogalacto-side chains, rhamnogalacturonan II, homogalacturonan and β-glucan were detected by MALDI-TOF MS, NMR and glycosyl-linkage analysis. Previous reports suggest that these oligosaccharide and polysaccharide structures have prebiotic, bacterial pathogen anti-adhesion, and cholesterol-lowering activity, while anthocyanins are well-known antioxidants. A strawberry pomace microwave acid-extracted (10 min, 80 °C) fraction had high molar mass (2376 kDa) and viscosity (3.75 dL/g), with an extended rod shape. A random coil shape, that was reported previously to bind to phenolic compounds, was observed for other strawberry microwave-extracted fractions. These strawberry fiber structural details suggest that they can thicken foods, while the polysaccharide and polyphenol interaction indicates great potential as a multiple-function bioactive food ingredient important for gut and metabolic health.

59 BASIC BIOLOGICAL SCIENCES↗

Pulsating Poiseuille flow of a cement slurry

In this paper, we investigate the pulsatile flow of a cement slurry in a pipe. The constitutive relation for the viscous stress tensor is based on the power-law model, where the shear viscosity not only depends on the shear rate but also the volume fraction of the cement particles. To solve for the volume fraction field, a convection-diffusion equation is used. The dimensionless form of the governing equations and the boundary conditions are solved numerically at different pulsatile cycles. Further, a parametric study is conducted to study the effect of different dimensionless numbers at different cycles on the velocity and the volume fraction profiles.

36 MATERIALS SCIENCE↗

A discrete dislocation dynamics study of precipitate bypass mechanisms in nickel-based superalloys

Order strengthening in nickel-based superalloys is associated with the extra stress required for dislocations to bypass the $\gamma'$ precipitates distributed in the $\gamma$ matrix. Depending on the operating conditions and microstructure, a rich variety of bypass mechanism has been identified, with various shearing and Orowan looping processes gradually giving way to climb bypass as the operating conditions change from the low/intermediate temperatures and high stress regime, to the high temperature and low stress regime. When anti phase boundary (APB) shearing and Orowan looping mechanisms operate, the classical picture is that, at for a given volume fraction, the bypass mechanism changes from shearing to looping with increased particle size and within a broad coexistence size window. Another possibility, which is supported by indirect experimental evidence, is that a third “hybrid” transition mechanism may operate. Here, in this paper we use discrete dislocation dynamics (DDD) simulations to study dislocation bypass mechanisms in Ni-based superalloys. We develop a new method to compute generalized stacking fault forces in DDD simulations, based on a concept borrowed from complex analysis and known as the winding number of a closed curve about a point. We use this method to study the mechanisms of bypass of a square lattice of spherical $\gamma'$ precipitates by $a/2\langle110\rangle$ {111} edge dislocations, as a function of the precipitates volume fraction and size. We show that not only the hybrid mechanism is possible, but also that it operates as the transition mechanism between the shearing and looping regimes over a wide range of precipitates volume fraction and radii. Based on our simulation results, we propose a simple model for the strength of this mechanism. We also consider the effects of a $\gamma$/$\gamma'$ lattice misfit on the bypass mechanisms, which we approximate by an additional precipitate stress computed according to Eshelby’s inclusion theory. We show that in the shearing and hybrid looping-shearing regimes, a lattice misfit generally results in an increased bypass stress. For sufficiently high lattice misfit, the critical bypass configuration in attractive dislocation-precipitates interactions changes dramatically, and the bypass stress is controlled by the pinning of the trailing dislocation on the exit side of the precipitates, similar to what has been reported in the high-temperature creep literature.

36 MATERIALS SCIENCE↗