SEARCH · Engineering Papers

Results for “data assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Performance improvements of the windowed multipole formalism using a rational fraction approximation of the Faddeeva function

The windowed multipole (WMP) formalism was introduced as a way to calculate Doppler broadened cross sections on the fly during Monte Carlo simulations. While more arithmetic is needed compared to point-wise cross section look-ups, performance remained competitive from the large memory reductions and sequential data access. The single most expensive function call in a depleted fuel assembly problem using WMP comes from the evaluation of the Faddeeva function, which previously relied on a highly accurate, highly-branching algorithm. This paper explores the use of rational fraction approximations tailored to the domain interest of reactor physics applications and the development of lower accuracy approximations sufficient for our application. The rational approximations were implemented and tested in OpenMC on an infinite medium problem to stress the cross section calculation routine and a PWR assembly problem. In both cases, the rational approximation nearly eliminated the ∼ 20% penalty previously observed when comparing to point-wise libraries. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

Status Update on the High Precision Isotopic Measurements on High Burnup LWR Fuel in 2020

The US Department of Energy (DOE) Office of Nuclear Energy (NE) is currently investigating the feasibility of directly disposing dual-purpose (storage and transportation) canisters (DPCs) in a spent nuclear fuel (SNF) repository. Criticality during the repository performance period (10,000 years or more) is one of the major concerns related to direct disposal of DPCs, specifically as the system undergoes degradation in the repository environment and timeframe. Oak Ridge National Laboratory (ORNL) is developing an as-loaded criticality analysis methodology using full (actinides + fission products) burnup credit that exploits the inherent criticality margin associated with actual canister-specific loading configuration. Burnup credit criticality analysis requires validation of the depletion/decay codes used to generate the burned isotopic inventory of an assembly by comparing the code-predicted inventory with experimentally determined isotopic data. Currently, isotopic measurement data for boiling water reactors (BWR) SNF are limited, and additional measurements will be highly beneficial for BWR burnup credit analysis, which is essential to demonstrate disposability of BWR DPCs. Moreover, new pressurized water reactor (PWR) samples of isotopic measurements will expand the PWR sample population and consequently will greatly improve sample statistics. In turn, this will reduce uncertainty in the computational determination of the isotopic composition of commercial SNF and eliminate additional penalties currently used for lack of data. As part of the isotopic analysis task, eight diverse, high burnup (HBU) samples from several PWR rods are being dissolved and isotopically analyzed to provide high-quality measurement data for PWR SNF to reducing the uncertainties associated with PWR isotopic depletion validation. The isotopics of interest focus on nuclides important to burnup credit, shielding, and decay heat in PWR SNF. Additionally, eight high burnup BWR fuel samples from the Limerick nuclear power plant have been identified for measurement to support reducing uncertainties associated with BWR isotopic depletion validation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Anion-exchange membrane water electrolysis: insights from round-robin testing

As research and industrial interest in anion-exchange membrane water electrolysis (AEMWE) grows, there is an increasing need for reliable baselines and cross-lab validation of results. The wide variety of material sets and operating conditions under consideration for AEMWE has thus far limited efforts for standardization. In this study, round-robin testing was conducted in deionized water and KOH-based supporting electrolyte by 5 institutions from academia, national laboratories, and industry to provide baseline performance data and identify sources of cross-lab variability. Baseline membrane electrode assemblies were fabricated with commercial catalysts, membranes, and transport layers using standard techniques and tested using reagent-grade electrolytes, aiming for accessibility rather than state-of-the-art performance. From all tests, the average voltage at 1 A/cm 2 was 2.72 ± 0.17 V and 1.87 ± 0.03 V in deionized water and 0.1 M KOH, respectively. The maximum in-house and cross-lab variations at this current density were 118 mV and 476 mV in water and 60 and 88 mV in 0.1 M KOH. The KOH purity, station contamination, and temperature control were identified as possible factors affecting performance between labs, with in-house specific variation attributed to sample-to-sample differences in fabrication, cell assembly, and station contamination. This work provides a commercial baseline for the field and highlights the need for improved standardization and reproducibility in AEMWE research.

08 HYDROGEN↗

DOE OSTI2021

Astrometric Membership Tests for the Zinn–Newell–Gibson UV-bright Stars in Galactic Globular Clusters

In 1972, Zinn, Newell, & Gibson (ZNG) published a list of 156 candidate UV-bright stars they had found in 27 Galactic globular clusters (GCs), based on photographs in the U and V bands. UV-bright stars lie above the horizontal branch (HB) and blueward of the asymptotic giant branch (AGB) and red giant branch in the clusters’ color–magnitude diagrams. They are in rapid evolutionary phases—if they are members and not unrelated bright foreground stars. The ZNG list has inspired numerous follow-up studies, aimed at understanding late stages of stellar evolution. However, the ZNG candidates were presented only in finding charts, and celestial coordinates were not given. Using my own collection of CCD frames in u and V, I have identified all of the ZNG objects, and have assembled their coordinates, parallaxes, and proper motions from the recent Gaia Early Data Release 3 (EDR3). Based on the Gaia astrometry, I have determined which objects are probable cluster members (45% of the sample). For the members, using photometry from EDR3, I have assigned the stars to various evolutionary stages, including luminous post-AGB stars, and stars above the HB. I point out several ZNG stars of special interest that have still, to my knowledge, never been studied in detail. This study is an adjunct to a forthcoming survey of the Galactic GCs in the uBVI photometric system, designed for detection of low-gravity stars with large Balmer discontinuities.

47 OTHER INSTRUMENTATION↗

NASA NTRS1972

Regeneration of oxygen from carbon dioxide and water.

In a closed ecological system it is necessary to reclaim most of the oxygen required for breathing from respired carbon dioxide and the remainder from waste water. One of the advanced physicochemical systems being developed for generating oxygen in manned spacecraft is the solid electrolyte-electrolysis system. The solid electrolyte system consists of two basic units, an electrolyzer and a carbon monoxide disproportionator. The electrolyzer can reclaim oxygen from both carbon dioxide and water. Electrolyzer preparation and assembly are discussed together with questions of reactor design and electrolyzer performance data.

Weissbart, J.↗

NASA NTRS1974

Kinetics of oxygen atom formation during the oxidation of methane behind shock waves

An experimental and analytical study of the formation of oxygen atoms during the oxidation of methane and methane-hydrogen mixtures behind incident shock waves was carried out over the temperature range 1790-2584 K at reaction pressures between 1.2 and 1.7 atm. Oxygen atom levels were determined indirectly by measurement of emission from reaction of O with CO. On the basis of these data and ignition-delay data reported in the literature, a kinetic scheme for methane oxidation was assembled. The proposed kinetic mechanism, in general, predicts higher peak oxygen atom levels than the current oxidation mechanisms proposed by Bowman and Seery and by Skinner and his co-workers.

Jachimowski, C. J.↗

NASA NTRS1977

Large-scale impact and explosion craters - Comparisons of morphological and structural analogs

Crater studies indicate now that there are a broad set of morphological and structural analogs which occur in both impact and explosion craters. A description is presented of impact and explosion analogs for three basic crater types, including bowl-shaped craters, flat-floored craters with central uplift, and flat-floored craters with multirings. A systematic documentation is provided of the more critical morphological and structural analogs common between large natural bowl-shaped impact and explosion craters, between central uplift impact and explosion craters, and between multiring impact and explosion craters. The data presented consist of a set of published and unpublished cratering studies assembled into a single ordered outline with each crater described in the same format and graphic style.

Roddy, D. J.↗

NASA NTRS1978

GCF HSD error control

A selective repeat automatic repeat request (ARQ) system was implemented under software control in the Ground Communications Facility error detection and correction (EDC) assembly at JPL and the comm monitor and formatter (CMF) assembly at the DSSs. The CMF and EDC significantly improved real time data quality and significantly reduced the post-pass time required for replay of blocks originally received in error. Since the remote mission operation centers (RMOCs) do not provide compatible error correction equipment, error correction will not be used on the RMOC-JPL high speed data (HSD) circuits. The real time error correction capability will correct error burst or outage of two loop-times or less for each DSS-JPL HSD circuit.

Hung, C. K.↗

NASA NTRS1977

Solar heating system installed at Telex Communications, Inc., Blue Earth, Minnesota

The solar heating system for space heating a 97,000 square foot building which houses administrative offices, assembly areas, and warehouse space is summarized. Information on system description, test data, major problems and resolutions, performance, operation and maintenance manual, manufacturer's literature, and as-built drawings is presented.

Source record↗

NASA NTRS1981

A pad perturbation method for the dynamic coefficients of tilting-pad journal bearings

A pad assembly method for analyzing tilting-pad bearings is presented. The method results in the complete coefficient matrix for a tilting-pad bearing; the matrix is independent of the pad inertia, the pitch frequency and the number of degrees of freedom of the pad. A pad assembly method is used because it allows the collection of more bearing data with less computer time than a brute force iterative procedure. The results given show the complete dynamical matrices for a five-pad tilting-pad bearing both including and ignoring the damping effects of the unloaded (top) pads. For a symmetrical tilting-pad bearing the reduced cross-coupling coefficients are zero when the moment of inertia of the pad is ignored.

Allaire, P. E.↗

NASA NTRS1982

Aerodynamic characteristics of a large-scale, twin tilt-nacelle V/STOL model

A subsonic tilt-nacelle V/STOL aircraft configuration is described which is powered by two turbofan engines, mounted on a single carry-through structure that is designed to maintain the thrust axis close to the center of gravity at nacelle incidences of 5-95 deg. Control during V/STOL operation, often from small ship platforms, is achieved by means of a vane assembly that is immersed in each turbofan's exhaust. Wind tunnel test data have been obtained with an 11.2-m wing span model for the vertical-to-horizontal flight transition capability of the concept. It is found that the aircraft can operate over a broad transition corridor, with sufficient maneuver capability about the trim points. The control vane exhibited linear response characteristics over a large deflection range, with little influence from power, angle of attack or ground proximity in hover. The model induced a positive ground effect in hover that increased as wheel height was approached and strake angle increased.

Falarski, M. D.↗

NASA NTRS1982

Design and evaluation of low cost blades for large wind driven generating systems

The development and evaluation of a low cost blade concept based on the NASA-Lewis specifications is discussed. A blade structure was designed and construction methods and materials were selected. Complete blade tooling concepts, various technical and economic analysis, and evaluations of the blade design were performed. A comprehensive fatigue test program was conducted to provide data and to verify the design. A test specimen of the spar assembly, including the root end attachment, was fabricated. This is a full-scale specimen of the root end configuration, 20 ft long. A blade design for the Mod '0' system was completed.

Eggert, W. S.↗

NASA NTRS1986

Clouds, aerosols, and photochemistry in the Jovian atmosphere

An assessment is made of the development status of concepts for cloud and aerosol compositions, vertical and horizontal distributions, and microphysical properties, in the Jovian upper troposphere and stratosphere. Attention is given to several key photochemical species' relationships to aerosol formation as well as their transport process implications, treating photochemistry in the context of comparative planetology and noting differences and similarities among the outer planet atmospheres; since this approach emphasizes observational data, a variegated assortment of ground-based and spacecraft observations is assembled. Current views on the tropospheric distribution of clouds are challenged, and a rationale is presented for alternative accounts.

West, R. A.↗

NASA NTRS1987

Microwave component time delays for the 70-meter antennas

The X-band feed assemblies in the 64 meter antennas were redesigned to accommodate the upgrading to 70 meters and the associated surface reshaping. To maintain time delay data logs, new calculations were made of the microwave component delays for the XRO Mod IV X-band (8.4 to 8.45 GHz) feed assembly that was installed at DSS-63, and will soon be implemented at DSS-43 and DSS-14.

Hartop, R.↗

NASA NTRS1987

Five year global dataset: NMC operational analyses (1978 to 1982)

This document describes procedures used in assembling a five year dataset (1978 to 1982) using NMC Operational Analysis data. These procedures entailed replacing missing and unacceptable data in order to arrive at a complete dataset that is continuous in time. In addition, a subjective assessment on the integrity of all data (both preliminary and final) is presented. Documentation on tapes comprising the Five Year Global Dataset is also included.

Straus, David↗

NASA NTRS1992

Shuttle flight experiment preliminary proposal: Demonstration of welding applications in space

In June 1991 work was initiated at MSFC on an end-effector for 'Robotic Assembly of Welded Truss Structures in Space'. The case for welded joint assembly on orbit was discussed in the 1991 SFFP Final Report 'D'. Data drawn from Aerobrake studies (supported by the ISAAC program) allowed the more detailed investigations that accompany a design with relatively concrete goals. This principle guides current efforts to develop scenarios that further demonstrate the utility of welding for space construction and/or repair.

Brewer, William V.↗

NASA NTRS1990

Flight telerobotic servicer

Viewgraphs on the Space Station Flight Telerobotic Servicer (SSFTS) are presented. Topics covered include: SSFTS design; SSFTS elements; FTS mission requirements; FTS general requirements; flight telerobotic servicer - telerobot; FTS manipulator; force-torque transducer; end effector changeout mechanism; flight telerobotic servicer - end-of-arm tooling; user interfaces; FTS data management and processing; control subsystem; FTS vision subsystem and camera positioning assembly; FTS workstation display assembly panel; mini-master hand controller; and FTS NASREM system architecture.

Haley, Dennis↗

NASA NTRS1992

Advanced construction management for lunar base construction - Surface operations planner

The study proposes a conceptual solution and lays the framework for developing a new, sophisticated and intelligent tool for a lunar base construction crew to use. This concept integrates expert systems for critical decision making, virtual reality for training, logistics and laydown optimization, automated productivity measurements, and an advanced scheduling tool to form a unique new planning tool. The concept features extensive use of computers and expert systems software to support the actual work, while allowing the crew to control the project from the lunar surface. Consideration is given to a logistics data base, laydown area management, flexible critical progress scheduler, video simulation of assembly tasks, and assembly information and tracking documentation.

Kehoe, Robert P.↗