Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “damage modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Effects of Low Dose Radiation and Radiation Countermeasures on Infection By Spaceflight Analogue Cultured Salmonella Using 3-D Biomimetic Human Tissue Models

While both microgravity and radiation are major biological stressors associated with the spaceflight environment, their cumulative impact on host-pathogen interactions and infectious disease risks are rarely considered. This is critical to address, since the cumulative effects of these stressors during spaceflight may result in unexpected negative impacts on crew health and performance that neither condition alone would predict, thus limiting the ability to develop effective countermeasures. Previously, we showed that both spaceflight and spaceflight analogue culture increased the virulence and pathogenesis-related characteristics of the foodborne pathogen, Salmonella Typhimurium (S. Typhimurium), which is responsible for disqualification of food destined for the International Space Station and Salmonella spp. have been found aboard NASA spacecraft. Recently, we demonstrated that spaceflight-analogue culture of S. Typhimurium increased its ability to infect 3-D biomimetic human intestinal tissue models. In a separate study, we showed low dose radiation damaged our 3-D intestinal models. The primary objective of this proposal is to evaluate the possibility that low dose radiation will exacerbate the already increased bacterial pathogenicity of S. Typhimurium observed following spaceflight analogue culture. In addition, we will determine the impact of a radiation countermeasure to provide protection against both radiation and pathogen-induced tissue damage and inflammation. Hypothesis: The already enhanced infection potential of spaceflight analogue cultured S. Typhimurium will be further exacerbated when used to infect host cells exposed to low dose radiation and this enhanced pathogenicity can be mitigated by a radioprotective compound. Aims: 1.Characterize the impact of spaceflight-analogue culture on the ability of S. Typhimurium to infect 3-D biomimetic intestinal tissue models before and after exposure to low dose radiation. 2. Evaluate the ability of the radioprotective compound, EC-18, to protect 3-D intestinal models from low dose radiation, S. Typhimurium infection, and the cumulative impact of these stressors. Significance: Current infectious disease risk assessments for spaceflight do not consider the potential for increased susceptibility to infection and disease resulting from exposure to low dose radiation, which is a critical consideration. This study will provide key evidence to determine if exposure to low dose radiation may be a factor in astronaut susceptibility to infection during long duration exploration missions and the impact of selected countermeasures to mitigate that risk to crew health. We have completed infection studies of the 3-D biomimetic intestinal tissue models and are currently analyzing the data.

Jennifer Barrila↗

Effects of Low Dose Radiation and Radiation Countermeasures on Infection by Spaceflight Analogue Cultured Salmonella Using 3-D Biomimetic Human Tissue Models

While both microgravity and radiation are major biological stressors associated with the spaceflight environment, their cumulative impact on host-pathogen interactions and infectious disease risks are rarely considered. This is critical to address, since the cumulative effects of these stressors during spaceflight may result in unexpected negative impacts on crew health and performance that neither condition alone would predict, thus limiting the ability to develop effective countermeasures. Previously, we showed that both spaceflight and spaceflight analogue culture increased the virulence and pathogenesis-related characteristics of the foodborne pathogen, Salmonella Typhimurium (S. Typhimurium), which is responsible for disqualification of food destined for the International Space Station and Salmonella spp. have been found aboard NASA spacecraft. Recently, we demonstrated that spaceflight-analogue culture of S. Typhimurium increased its ability to infect 3-D biomimetic human intestinal tissue models. In a separate study, we showed low dose radiation damaged our 3-D intestinal models. The primary objective of this proposal is to evaluate the possibility that low dose radiation will exacerbate the already increased bacterial pathogenicity of S. Typhimurium observed following spaceflight analogue culture. In addition, we will determine the impact of a radiation countermeasure to provide protection against both radiation and pathogen-induced tissue damage and inflammation. Hypothesis: The already enhanced infection potential of spaceflight analogue cultured S. Typhimurium will be further exacerbated when used to infect host cells exposed to low dose radiation and this enhanced pathogenicity can be mitigated by a radioprotective compound. Aims: 1.Characterize the impact of spaceflight-analogue culture on the ability of S. Typhimurium to infect 3-D biomimetic intestinal tissue models before and after exposure to low dose radiation. 2. Evaluate the ability of the radioprotective compound, EC-18, to protect 3-D intestinal models from low dose radiation, S. Typhimurium infection, and the cumulative impact of these stressors. Significance: Current infectious disease risk assessments for spaceflight do not consider the potential for increased susceptibility to infection and disease resulting from exposure to low dose radiation, which is a critical consideration. This study will provide key evidence to determine if exposure to low dose radiation may be a factor in astronaut susceptibility to infection during long duration exploration missions and the impact of selected countermeasures to mitigate that risk to crew health. We have completed infection studies of the 3-D biomimetic intestinal tissue models and are currently analyzing the data.

Jennifer Barrila↗

Effects of Low Dose Radiation and Radiation Countermeasures on Infection By Spaceflight Analogue Cultured Salmonella Using 3-D Biometric Human Tissue Models

While both microgravity and radiation are major biological stressors associated with the spaceflight environment, their cumulative impact on host-pathogen interactions and infectious disease risks are rarely considered. This is critical to address, since the cumulative effects of these stressors during spaceflight may result in unexpected negative impacts on crew health and performance that neither condition alone would predict, thus limiting the ability to develop effective countermeasures. Previously, we showed that both spaceflight and spaceflight analogue culture increased the virulence and pathogenesis-related characteristics of the foodborne pathogen, Salmonella Typhimurium (S. Typhimurium), which is responsible for disqualification of food destined for the International Space Station and Salmonella spp. have been found aboard NASA spacecraft. Recently, we demonstrated that spaceflight-analogue culture of S. Typhimurium increased its ability to infect 3-D biomimetic human intestinal tissue models. In a separate study, we showed low dose radiation damaged our 3-D intestinal models. The primary objective of this proposal is to evaluate the possibility that low dose radiation will exacerbate the already increased bacterial pathogenicity of S. Typhimurium observed following spaceflight analogue culture. In addition, we will determine the impact of a radiation countermeasure to provide protection against both radiation and pathogen-induced tissue damage and inflammation. Hypothesis: The already enhanced infection potential of spaceflight analogue cultured S. Typhimurium will be further exacerbated when used to infect host cells exposed to low dose radiation and this enhanced pathogenicity can be mitigated by a radioprotective compound. Aims: 1. Characterize the impact of spaceflight-analogue culture on the ability of S. Typhimurium to infect 3-D biomimetic intestinal tissue models before and after exposure to low dose radiation. 2. Evaluate the ability of the radioprotective compound, EC-18, to protect 3-D intestinal models from low dose radiation, S. Typhimurium infection, and the cumulative impact of these stressors. Significance: Current infectious disease risk assessments for spaceflight do not consider the potential for increased susceptibility to infection and disease resulting from exposure to low dose radiation, which is a critical consideration. This study will provide key evidence to determine if exposure to low dose radiation may be a factor in astronaut susceptibility to infection during long duration exploration missions and the impact of selected countermeasures to mitigate that risk to crew health. This study has been initiated and data collection is beginning.

Jennifer Barrila↗

Effects of Low Dose Radiation and Radiation Countermeasures on Infection by Spaceflight Analogue Cultured Salmonella Using 3-D Biomimetic Human Tissue Models

While both microgravity and radiation are major biological stressors associated with the spaceflight environment, their cumulative impact on host-pathogen interactions and infectious disease risks are rarely considered. This is critical to address, since the cumulative effects of these stressors during spaceflight may result in unexpected negative impacts on crew health and performance that neither condition alone would predict, thus limiting the ability to develop effective countermeasures. Previously, we showed that both spaceflight and spaceflight analogue culture increased the virulence and pathogenesis-related characteristics of the foodborne pathogen, Salmonella Typhimurium (S. Typhimurium), which is responsible for disqualification of food destined for the International Space Station and Salmonella spp. have been found aboard NASA spacecraft. Recently, we demonstrated that spaceflight-analogue culture of S. Typhimurium increased its ability to infect 3-D biomimetic human intestinal tissue models. In a separate study, we showed low dose radiation damaged our 3-D intestinal models. The primary objective of this proposal is to evaluate the possibility that low dose radiation will exacerbate the already increased bacterial pathogenicity of S. Typhimurium observed following spaceflight analogue culture. In addition, we will determine the impact of a radiation countermeasure to provide protection against both radiation and pathogen-induced tissue damage and inflammation. Hypothesis: The already enhanced infection potential of spaceflight analogue cultured S. Typhimurium will be further exacerbated when used to infect host cells exposed to low dose radiation and this enhanced pathogenicity can be mitigated by a radioprotective compound. Aims: 1. Characterize the impact of spaceflight-analogue culture on the ability of S. Typhimurium to infect 3-D biomimetic intestinal tissue models before and after exposure to low dose radiation. 2. Evaluate the ability of the radioprotective compound, EC-18, to protect 3-D intestinal models from low dose radiation, S. Typhimurium infection, and the cumulative impact of these stressors. Significance: Current infectious disease risk assessments for spaceflight do not consider the potential for increased susceptibility to infection and disease resulting from exposure to low dose radiation, which is a critical consideration. This study will provide key evidence to determine if exposure to low dose radiation may be a factor in astronaut susceptibility to infection during long duration exploration missions and the impact of selected countermeasures to mitigate that risk to crew health. This study has been initiated and data collection is beginning.

Jennifer Barrila↗

Systems Biology Model of Interactions between Tissue Growth Factors and DNA Damage Pathways: Low Dose Response and Cross-Talk in TGFβ and ATM Signaling

The etiology of radiation carcinogenesis has been described in terms of aberrant changes that span several levels of biological organization. Growth factors regulate many important cellular and tissue functions including apoptosis, differentiation and proliferation. A variety of genetic and epigenetic changes of growth factors have been shown to contribute to cancer initiation and progression. It is known that cellular and tissue damage to ionizing radiation is in part initiated by the production of reactive oxygen species, which can activate cytokine signaling, and the DNA damage response pathways, most notably the ATM signaling pathway. Recently, the transforming growth factor β (TGFβ) pathway has been shown to regulate or directly interact with the ATM pathway in the response to radiation. The relevance of this interaction with the ATM pathway is not known although p53 becomes phosphorylated and DNA damage responses are involved. However, growth factor interactions with DNA damage responses have not been elucidated particularly at low doses, and further characterization of their relationship to cancer processes is warranted. Our goal will be to use a systems biology approach to mathematically and experimentally describe the low-dose responses and cross-talk between the ATM and TGFβ pathways initiated by low- and high-LET radiation. We will characterize ATM and TGFβ signaling in epithelial and fibroblast cells using 2D models and ultimately extending to 3D organotypic cell culture models to begin to elucidate possible differences that may occur for different cell types and/or inter-cellular communication. We will investigate the roles of the Smad and Activating transcription factor 2 (ATF2) proteins as the potential major contributors to crosstalk between the TGFβ and ATM pathways, and links to cell cycle control and/or the DNA damage response, and potential differences in their responses at low and high doses. We have developed various experimental approaches to apply to these problems using confocal microscopy and flow cytometry to detail changes at low dose/dose-rate in order to understand individual cell responses, and will establish our mathematical models based on the experimental findings resulting from changes in DNA repair, apoptosis and proliferation.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Thermo-Hydro-Mechanical Modeling of Brine Migration in a Heated Borehole Test in Bedded Salt

Abstract This research paper focuses on the thermo-hydro-mechanical (THM) modeling of brine migration in a heated borehole test conducted as part of the ongoing Brine Availability Test in Salt (BATS) at the Waste Isolation Pilot Plant (WIPP) in New Mexico. It is a component of the international collaboration project DECOVALEX-2023 (DEvelopment of COupled models and their VALidation against EXperiments), which aims to understand the THM processes governing brine flow in heated rock salt repositories through collaborative analysis by multiple research teams. Using the TOUGH–FLAC simulator, THM simulations were performed and compared with data from the BATS phase 1a. This experiment involved two identical horizontal-borehole arrays, one heated and one serving as a control, both equipped with sensor arrays. Analysis of measurements revealed water flow rate surges during heater power transitions, with the highest jump observed during cooling. Acoustic emission activity exhibited distinct patterns in response to heater power changes, suggesting that damage to rock salt is particularly pronounced during the cooling phase. The THM simulations successfully captured these phenomena, highlighting the significance of thermal effects, brine migration, and mechanical behavior in predicting brine availability in heated and damaged rock salt. Our modeling also revealed the critical interplay between heating and cooling-induced damage and its influence on flow properties, particularly affecting brine inflow estimation. Notably, we found that cooling-induced brine inflow spikes result from increased permeability due to tensile dilatancy. These findings have important implications for the development of robust containment strategies and enhance our understanding of the complex processes involved in repository performance.

58 GEOSCIENCES↗

Stability Analysis of Intertank Formed Skin/Stringer Compression Panel with Simulated Damage

The External Tank (ET) is a component of the Space Shuttle launch vehicle that contains fuel and oxidizer. During launch, the ET supplies the space shuttle main engines with liquid hydrogen and liquid oxygen. In addition to supplying fuel and oxidizer, it is the backbone structural component of the Space Shuttle. It is comprised of a liquid hydrogen (LH2) tank and a liquid oxygen (LOX) tank, which are separated by an Intertank. The Intertank is a stringer-stiffened cylindrical structure with hat-section stringers that are roll formed from aluminum-lithium alloy Al-2090. Cracks in the Intertank stringers of the STS-133 ET were noticed after a November 5, 2010 launch attempt. The cracks were approximately nine inches long and occurred on the forward end of the Intertank (near the LOX tank), along the fastener line, and were believed to have occurred while loading the ET with the cryogenic propellants. These cracks generated questions about the structural integrity of the Intertank. In order to determine the structural capability of the Intertank with varying degrees of damage, a finite element model (FEM) simulating a 1995 compression panel test was analyzed and correlated to test data. Varying degrees of damage were simulated in the FEM, and non-linear stability analyses were performed. The high degree of similarity between the compression panel and the Intertank provided confidence that the ET Intertank would have similar capabilities.

Harper, David W.↗

Predictions of cell damage rates for Lifesat missions

The track model of Katz is used to make predictions of cell damage rates for possible Lifesat experiments. Contributions from trapped protons and electrons and galactic cosmic rays are considered for several orbits. Damage rates for survival and transformation of C3HT10-1/2 cells are predicted for various spacecraft shields.

Cucinotta, Francis A.↗

Machine Learning for the Prediction of Local Asteroid Damages

Risk assessment studies of local asteroid hazards traditionally simulate the physics of meteors with engineering models tailored to analyze tens-of-millions of scenarios. However, these simplified approaches still need to solve time-dependent ODEs to model the entry process and the resulting ground damage. With a computational cost of O(0.01 CPU.s) per scenario, simulating these large numbers of potential entry conditions in risk assessment studies can take several days on local computers. To improve computational efficiency, we propose in this paper an orthogonal approach based on machine learning models to predict the size of damaged areas given a list of entry parameters. We train 5 machine learning methods and compare the predictions to the outputs of the PAIR model, first only with primitive entry condition variables, and then with more advanced features. We find that complex models like neural networks are well-suited to estimate blast hazards, while simpler linear models can accurately assess thermal damage. For both types of hazards, the radii of damaged areas can be predicted with around 10% average errors and a coefficient of determination (R2) of 0.99. The CPU time is decreased by a factor O(10 3 ) compared to the PAIR model, which enables the simulation of millions of scenarios in minutes, on a local computer. We then use the same machine learning approaches for a classification task where the models are trained to predict if an asteroid will produce a given level of damage. Results show that complex models like the gradient boosting classifier and the neural network can perform this task with 98% accuracy. Beyond surrogate models, we finally incorporate the machine learning algorithms to the state-of-the-art Shapley sensitivity analysis and present a ranking of the entry parameters based on their contributions to ground damages.

SMD↗

HERMES: A model to describe deformation, burning, explosion, and detonation

HERMES (High Explosive Response to MEchanical Stimulus) was developed to fill the need for a model to describe an explosive response of the type described as BVR (Burn to Violent Response) or HEVR (High Explosive Violent Response). Characteristically this response leaves a substantial amount of explosive unconsumed, the time to reaction is long, and the peak pressure developed is low. In contrast, detonations characteristically consume all explosive present, the time to reaction is short, and peak pressures are high. However, most of the previous models to describe explosive response were models for detonation. The earliest models to describe the response of explosives to mechanical stimulus in computer simulations were applied to intentional detonation (performance) of nearly ideal explosives. In this case, an ideal explosive is one with a vanishingly small reaction zone. A detonation is supersonic with respect to the undetonated explosive (reactant). The reactant cannot respond to the pressure of the detonation before the detonation front arrives, so the precise compressibility of the reactant does not matter. Further, the mesh sizes that were practical for the computer resources then available were large with respect to the reaction zone. As a result, methods then used to model detonations, known as β-burn or program burn, were not intended to resolve the structure of the reaction zone. Instead, these methods spread the detonation front over a few finite-difference zones, in the same spirit that artificial viscosity is used to spread the shock front in inert materials over a few finite-difference zones. These methods are still widely used when the structure of the reaction zone and the build-up to detonation are unimportant. Later detonation models resolved the reaction zone. These models were applied both to performance, particularly as it is affected by the size of the charge, and to situations in which the stimulus was less than that needed for reliable performance, whether as a result of accident, hazard, or a fault in the detonation train. These models describe the build-up of detonation from a shock stimulus. They are generally consistent with the mesoscale picture of ignition at many small defects in the plane of the shock front and the growth of the resulting hot-spots, leading to detonation in heterogeneous explosives such as plastic-bonded explosives (PBX). The models included terms for ignition, and also for the growth of reaction as tracked by the local mass fraction of product gas, {lambda}. The growth of reaction in such models incorporates a form factor that describes the change of surface area per unit volume (specific surface area) as the reaction progresses. For unimolecular crystalline-based explosives, the form factor is consistent with the mesoscale picture of a galaxy of hot spots burning outward and eventually interacting with each other. For composite explosives and propellants, where the fuel and oxidizer are segregated, the diffusion flame at the fuel-oxidizer interface can be interpreted with a different form factor that corresponds to grains burning inward from their surfaces. The form factor influences the energy release rate, and the amount of energy released in the reaction zone. Since the 19 th century, gun and cannon propellants have used perforated geometric shapes that produce an increasing surface area as the propellant burns. This helps maintain the pressure as burning continues while the projectile travels down the barrel, which thereby increases the volume of the hot gas. Interior ballistics calculations use a geometric form factor to describe the changing surface area precisely. As a result, with a suitably modified form factor, detonation models can represent burning and explosion in damaged and broken reactant. The disadvantage of such models in application to accidents is that the ignition term does not distinguish between a value of pressure that results from a shock, and the same pressure that results from a more gradual increase. This disagrees with experiments, where explosives were subjected to a gradual rise in pressure and did not exhibit reaction. More recent models do distinguish between slow pressure rises and shocks, and have had some success in the describing the response of explosives to single and multiple shocks, and the increase of shock sensitivity with porosity, at least over a limited range. The original formulation is appropriate for sustained shocks, but further work is ongoing to describe the response to short pulses. The HERMES model combines features from these prior models. It describes burning and explosion in damaged reactant, and also will develop a detonation if the gradual rise in pressure from burning steepens into a strong-enough shock. The shock strength needed for detonation in a fixed run distance decreases with increasing porosity.

36 MATERIALS SCIENCE↗

Ionization Cross Sections and Dissociation Channels of the DNA Sugar-Phosphate Backbone by Electron Collisions

It has been suggested that the genotoxic effects of ionizing radiation in living cells are not caused by the highly energetic incident radiation, but rather are induced by less energetic secondary species generated, the most abundant of which are free electrons.' The secondary electrons will further react to cause DNA damage via indirect and direct mechanisms. Detailed knowledge of these mechanisms is ultimately important for the development of global models of cellular radiation damage. We are studying one possible mechanism for the formation cf DNA strand breaks involving dissociative ionization of the DNA sugar-phosphate backbone induced by secondary electron co!lisions. We will present ionization cross sections at electron collision energies between threshold and 10 KeV using the improved binary encounter dipole (iBED) formulation' Preliminary results of the possible dissociative ionization pathways will be presented. It is speculated that radical fragments produced from the dissociative ionization can further react, providing a possible mechanism for double strand breaks and base damage.

Dateo, Christopher↗

Modeling nuclear waste disposal in crystalline rocks at the Forsmark and Olkiluoto repository sites – Evaluation of potential thermal–mechanical damage to repository excavations

We conduct coupled thermo-hydro-mechanical modeling of a KBS-3V repository design in crystalline rocks, using data and conditions from the Forsmark in Olkiluoto repository sites in Sweden and Finland. The study focuses on repository performance related to the impact of thermal and hydraulic evolution on the potential for thermal–mechanical damage to underground repository excavations. For the designs and conditions considered at the Forsmark and Olkiluoto repository sites, the simulations show a peak temperature well under the adopted performance target of a 100°C maximum temperature, whereas there is still a high potential for thermal–mechanical damage to the KBS-3V waste deposition holes. The thermal–mechanical damage is much more likely if rock permeability is so low that it delays saturation and swelling of bentonite-clay-based backfill beyond the time for the thermal–mechanical peak, which occurs 50 to 100 years after nuclear waste deposition. We also found that sidewalls of the KBS-3V emplacement tunnels are vulnerable to tensile fracturing due to the combined effect of thermal stressing and backfill swelling. The study highlights a strong interaction between bentonite-based backfill and host rock through capillary suction along with induced rock desaturation. A careful design and selection of the bentonite-clay-based backfill materials for KBS-3V tunnels and deposition holes can facilitate a timely saturation and backfill swelling that in turn can minimize thermal–mechanical damage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Systems Biology Model of Interactions Between Tissue Growth Factors and DNA Damage Pathways: Low Dose Response and Cross-Talk in TGFbeta and ATM Signaling

The etiology of radiation carcinogenesis has been described in terms of aberrant changes that span several levels of biological organization. Growth factors regulate many important cellular and tissue functions including apoptosis, differentiation and proliferation. A variety of genetic and epigenetic changes of growth factors have been shown to contribute to cancer initiation and progression. It is known that cellular and tissue damage to ionizing radiation is in part initiated by the production of reactive oxygen species, which can activate cytokine signaling, and the DNA damage response pathways, most notably the ATM signaling pathway. Recently the transforming growth factor β (TGFβ) pathway has been shown to regulate or directly interact with the ATM pathway in the response to radiation. The relevance of this interaction with the ATM pathway is not known although p53 becomes phosphorylated and DNA damage responses are involved. However, growth factor interactions with DNA damage responses have not been elucidated particularly at low doses and further characterization of their relationship to cancer processes is warranted. Our goal will be to use a systems biology approach to mathematically and experimentally describe the low dose responses and cross-talk between the ATM and TGFβ pathways initiated by low and high LET radiation. We will characterize ATM and TGFβ signaling in epithelial and fibroblast cells using 2D models and ultimately extending to 3D organotypic cell culture models to begin to elucidate possible differences that may occur for different cell types and/or inter-cellular communication. We will investigate the roles of the Smad and Activating transcription factor 2 (ATF2) proteins as the potential major contributors to cross- talk between the TGFβ and ATM pathways, and links to cell cycle control and/or the DNA damage response, and potential differences in their responses at low and high doses. We have developed various experimental approaches to apply to these problems using confocal microscopy and flow cytometry to detail changes at low dose/dose-rate in order to understand individual cell responses, and will establish our mathematical models based on the experimental findings resulting from changes in DNA repair, apoptosis and proliferation.

O'Neill, Peter↗

Development and Characterization of a Rate-Dependent Three-Dimensional Macroscopic Plasticity Model Suitable for Use in Composite Impact Problems

Several key capabilities have been identified by the aerospace community as lacking in the material/models for composite materials currently available within commercial transient dynamic finite element codes such as LS-DYNA. Some of the specific desired features that have been identified include the incorporation of both plasticity and damage within the material model, the capability of using the material model to analyze the response of both three-dimensional solid elements and two dimensional shell elements, and the ability to simulate the response of composites composed with a variety of composite architectures, including laminates, weaves and braids. In addition, a need has been expressed to have a material model that utilizes tabulated experimentally based input to define the evolution of plasticity and damage as opposed to utilizing discrete input parameters (such as modulus and strength) and analytical functions based on curve fitting. To begin to address these needs, an orthotropic macroscopic plasticity based model suitable for implementation within LS-DYNA has been developed. Specifically, the Tsai-Wu composite failure model has been generalized and extended to a strain-hardening based orthotropic plasticity model with a non-associative flow rule. The coefficients in the yield function are determined based on tabulated stress-strain curves in the various normal and shear directions, along with selected off-axis curves. Incorporating rate dependence into the yield function is achieved by using a series of tabluated input curves, each at a different constant strain rate. The non-associative flow-rule is used to compute the evolution of the effective plastic strain. Systematic procedures have been developed to determine the values of the various coefficients in the yield function and the flow rule based on the tabulated input data. An algorithm based on the radial return method has been developed to facilitate the numerical implementation of the material model. The presented paper will present in detail the development of the orthotropic plasticity model and the procedures used to obtain the required material parameters. Methods in which a combination of actual testing and selective numerical testing can be combined to yield the appropriate input data for the model will be described. A specific laminated polymer matrix composite will be examined to demonstrate the application of the model.

Impact↗

Piezoelectric impedance-based high-accuracy damage identification using sparsity conscious multi-objective optimization inverse analysis

Two elements are essential in structural health monitoring utilizing dynamic responses: response measurement with high-frequency contents, i.e., small characteristic wavelengths, that can adequately reflect damage features, and effective inverse identification analysis that is however oftentimes under-determined. The advancement of smart structure integration has led to active interrogation through frequency-sweeping piezoelectric impedance measurement at high frequency range. In this research we develop a multi-objective optimization formulation for the identification of damage location and severity utilizing piezoelectric impedance. While one optimization objective is to match the response measurement with finite element model prediction in the damage parametric space, the other is the number of locations of damage, i.e., the sparsity of damage index as the solution vector, since damage usually occurs within a small number of locations. This multi-objective formulation fits well the under-determined nature of damage identification, as it naturally provides multiple solutions as basis for further elucidation. The challenge remaining is how to find a small solution set that can include the actual damage scenario. Here we develop a novel inverse identification framework utilizing the intelligent swarm optimizer which possesses flexibility for enhancement. We first embed a sparsity enforcement process into the population generation of the optimizer, which yields a solution repository intrinsically possessing sparsity. We then apply reinforcement learning so the agents can adaptively opt for local strategies with the aim of enriching the searching patterns to diversify the solutions. Through the incorporation of a Q-table, searching toward more promising directions will be rewarded. Our case analyses employing experimental data indicate that this sparsity-conscious multi-objective particle swarm optimization technique can lead to a small solution set which generally encompasses the true damage scenario. This effectively solves the structural damage identification problem with piezoelectric impedance measurement.

Yang Zhang↗

Prediction and measurement of radiation damage to CMOS devices on board spacecraft

The CMOS Radiation Effects Measurement (CREM) experiment is presently being flown on the Explorer-55, to evaluate device performance in the actual space radiation environment and to correlate the respective measurements to on-the-ground laboratory irradiation results. The experiment contains an assembly of CMOS and P-MOS devices shielded in front over 2 pi steradian by flat slabs of aluminum of 40, 80, 150, and 300 mils (1.02, 2.04, 3.81, and 7.62 mm) thicknesses, and by a practically infinite shield in the back. Initial results from the CREM experiment are reported. Predictions of radiation damage to CMOS devices are based on standard environment models and computational techniques. Measured space damage is smaller than predicted by about a factor of 2-3 for thin shields but agrees well with predictions for thicker shields. It is not clear at this time how the trapped particle environment models or the computational methods should be modified in order to achieve better agreement between experimental results and predicted damage curves.

Cliff, R. A.↗

Review of the Current State of Knowledge on the Effects of Radiation on Concrete

A review of the current state of knowledge on the effects of radiation on concrete in nuclear applications is presented. Emphasis is placed on the effects of radiation damage as reflected by changes in engineering properties of concrete in the evaluation of the long-term operation (LTO) and for Plant Life or Aging Management of nuclear power plants (NPPs) in Japan, Spain, and the United States. National issues and concerns are described for Japan and the US followed by a discussion of the fundamental understanding of the effects radiation on concrete. Specifically, the effects of temperature, moisture content, and irradiation on ordinary Portland cement paste and the role of temperature and neutron energy spectra on radiation induced volumetric expansion (RIVE) of aggregate-forming minerals are described. This is followed by a discussion of the bounding conditions for extended operation, the significance of accelerated irradiation conditions, the role of temperature, creep, and how these issues are being incorporated into numerical and meso-scale models. From these insights on radiation damage, analyses of these effects on concrete structures are reviewed and the current status of work in Japan and the US are described. Also discussed is the recent formation of a new international scientific and technical organization, the International Committee on Irradiated Concrete (ICIC), to provide a forum for timely information exchanges among organizations pursuing the identification, quantification, and modeling of the effects of radiation on concrete in commercial nuclear applications. Lastly, the paper concludes with a discussion of research gaps including: 1) interpreting test-reactor data, 2) evaluating service-irradiated concrete for aging management and to inform radiation damage models with the Zorita NPP (Spain) serving as the first comprehensive test case, 3) irradiated-assisted alkali-silica reactions, and 4) RIVE under constrained conditions.

36 MATERIALS SCIENCE↗