Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bandwidth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

L-orthogonal signal transmission and detection.

Investigation of the detailed capabilities and performance characterization of systems that employ L-orthogonal signaling techniques. L-orthogonal signals represent a unified set of signals wherein the polyphase and orthogonal (bi-orthogonal) signal sets are included as special cases. This fact is important, since orthogonal (bi-orthogonal) and polyphase signaling sets represent opposing forces as far as tradeoffs between error probability, energy-to-noise ratio, and bandwidth requirements are concerned. Bounds on the performance of the optimum receiver and the performance of various suboptimum (practical) receiver structures are given. Coherent and differentially coherent detection of differentially encoded signals are also pursued. Various comparisons and tradeoffs are made by means of numerical evaluation of the error probability expressions.

Lindsey, W. C.↗

Effects of multipath fading on low data-rate space communications.

Studies have shown that there is a severe signal fading at the turbulent atmosphere of a distant planet such as Venus. The data may be lost during deep fade. It is the objective of this paper to examine the effects of multipath fading on the performance of the noncoherent coded system which is used for the low data-rate space communications especially with the small probes. An exact error probability of the wideband noncoherent MFSK receiver is derived from using the 'Rician' channel model. While the error performance of the receiver is worse than that of the ideal MFSK receiver, as expected, it is interesting to note that the performance degradation due to the multipath fading diminishes as the product of bit duration and IF filter bandwidth becomes large.

Chen, C. H.↗

Frequency selective coupler for integrated optics systems.

A frequency selective coupler which consists of two thin film waveguides imbedded in a periodic medium is studied using the Brillouin diagram. Detailed results for the relative bandwidth and the coupling factor are plotted as a function of normalized frequency for a representative case.

Elachi, C.↗

Plasmaspheric hiss.

A relatively steady band of ELF hiss has been detected by the OGO 5 search coil magnetometer on almost every passage through the plasmasphere; except for an anomalous region of the dayside at high geomagnetic latitudes, the emissions terminate abruptly at the plasmapause and are therefore referred to as 'plasmaspheric hiss.' A preliminary statistical study of the properties of the observed whistler mode turbulence has yielded the following characteristics: the waves are band limited with a sharp lower-frequency cutoff and a more diffuse upper-frequency cutoff; power spectra show a well-defined maximum near a few hundred hertz, the peak intensities generally ranging between 10 to the minus 7th power and 0.00001 gamma squared/Hz; the wave energy is spread over a bandwidth of a few hundred hertz, and corresponding wideband amplitudes are 5 to 50 milligamma; the waves are highly turbulent in nature and show little tendency toward definite polarization.

Thorne, R. M.↗

Redistribution of resonance radiation. II - The effect of magnetic fields.

Previously obtained results for scattering of radiation in the presence of collisions are restated in a density matrix formalism which employs an irreducible-tensor description of the radiation field. This formalism is particularly useful for problems associated with radiative transfer theory. The redistribution is then extended to include the effect of a weak magnetic field. By averaging over a finite bandwidth which is on the order of the Doppler width, simplified expressions of physical significance for the scattering in the Doppler core and the Lorentz wings are obtained. Expressions are also obtained for the corresponding source function of radiative transfer theory.

Omont, A.↗

Discrete component microwave amplifiers.

Several 2-3 GHz amplifiers using discrete variable components have been designed and tested. A power output of 6.5 watts with 30-mw drive and 29% efficiency has been obtained from a three-stage amplifier operating at 2.25 GHz. The unit has a 3 db bandwidth of 100 MHz and is stable with respect to temperature changes, a vacuum environment, and mechanical vibration. Significant problems arising from the use of discrete components have not been encountered.

Rippy, R. R.↗

Identification of comet nucleus from comet coma.

The study of comets is of important scientific value as part of the exploration of the solar system. This paper proposes a method, called 'stationary target identification,' to detect the nucleus within the coma. The method makes use of the fact that the coma is ever expanding about the nucleus. Therefore, when a radar beam is used for detection, the coma particles will produce a return signal that is Doppler shifted. The effects of the spatial extent of the coma and Doppler bandwidth of the coma returns upon the required data processing are considered. Also different methods of implementation are considered.-

Brock, H. I.↗

The Harvard experiment on OSO-6 - Instrumentation, calibration, operation, and description of observations.

The Harvard experiment carried by OSO-6 was an extreme-ultraviolet (EUV) spectrometer-spectroheliometer with a wavelength range of 285 to 1385 A, a spatial and spectral bandwidth of 35 x 35(arc sec) squared and 3 A, respectively. The instrument acquired data that have been deposited with the National Space Science Data Center and World Data Center A at the Goddard Space Flight Center in Greenbelt, Maryland, and are now available in their entirety to the scientific community. Aspects of the experiment that are relevant to potential users of the data are described - namely, instrument configuration and parameters, laboratory and inflight calibrations, as well as operational capabilities and procedures. The observations obtained are reported, and the nature, number, and dates of observation, where relevant, are listed.

Huber, M. C. E.↗

Multiple-beam satellite repeater tradeoffs applied to a multifunctional system.

This paper concerns satellite repeater tradeoffs for a multiple-beam, multiple-channel, multiple-connectivity satellite postulated to serve a diversity of domestic U.S. noncommercial requirements, with a substantial portion of the satellite power, weight, and bandwidth dedicated to video distribution and bradcast. The orders-of-magnitude of the requirements are given for the video plus high-rate data traffic category. The designs of two alternative baseline repeater configurations are presented, and estimates of their weight and their prime power consumption are given. These data are the basis for estimating the weight and power consumption of a range of alternative beam coverage, modulation, and channel capacity systems. These estimates are used to illustrate tradeoffs with different performance criteria as the independent variable: number of channels per beam and total number of beam-channels.

Kinal, G. V.↗

A digital communications system for manned spaceflight applications.

A highly efficient, all-digital communications signal design employing convolutional coding and PN spectrum spreading is described for two-way transmission of voice and data between a manned spacecraft and ground. Variable-slope delta modulation is selected for analog/digital conversion of the voice signal, and a convolutional decoder utilizing the Viterbi decoding algorithm is selected for use at each receiving terminal. A PN spread spectrum technique is implemented to protect against multipath effects and to reduce the energy density (per unit bandwidth) impinging on the earth's surface to a value within the guidelines adopted by international agreement. Performance predictions are presented for transmission via a TDRS (tracking and data relay satellite) system and for direct transmission between the spacecraft and earth. Hardware estimates are provided for a flight-qualified communications system employing the coded digital signal design.

Batson, B. H.↗

Thin-film temperature sensor.

A new device has been developed for sensing small and rapid temperature changes accompanying biochemical reactions. The active element consists of an evaporated thin-film capacitor having a relatively strong temperature dependence. This dependence is derived from electron trapping effects in the thin amorphous dielectric film. A voltage output of at least 50 mV/deg can be obtained prior to amplification by using a resonant ac bridge circuit operating at 100 kHz. The corresponding noise output for a 10 kHz bandwidth can with an optimum circuit be as low as 4 microvolts. Therefore, the minimum detectable temperature change would be 80 microdegrees at 10 kHz. Rapid thermal response is assured by supporting the thin-film capacitor on a thin anodic tantalum oxide film suspended across an electrolytically etched window in a tantalum foil.

Maserjian, J.↗

The Clark Lake array.

A fully steerable array of 720 conical log spiral antennas nearing completion in southern California is described. It is capable of operation at any frequency between 15 and 130 MHz an instantaneous bandwidth of 3 MHz. The array is a pencil-beam instrument with a beam width proportional to the wavelength; it varies from 3 to 27 feet across the frequency range. It will soon be available for both solar and sidereal studies.

Erickson, W. C.↗

Narrow-band photography of Jupiter and Saturn.

An IR-sensitive vidicon was used in the 1 to 2 mu region, with narrow-bandwidth filters, for Jupiter photographs taken in April, 1971, and Saturn photographs taken in December, 1970. The changes in limb darkening and surface details observed at different wavelengths are discussed. The 37 Jupiter photographs and the 38 Saturn photographs are included.

Fountain, J. W.↗

Mixed finite-difference scheme for analysis of simply supported thick plates.

A mixed finite-difference scheme is presented for the stress and free vibration analysis of simply supported nonhomogeneous and layered orthotropic thick plates. The analytical formulation is based on the linear, three-dimensional theory of orthotropic elasticity and a Fourier approach is used to reduce the governing equations to six first-order ordinary differential equations in the thickness coordinate. The governing equations possess a symmetric coefficient matrix and are free of derivatives of the elastic characteristics of the plate. In the finite difference discretization two interlacing grids are used for the different fundamental unknowns in such a way as to reduce both the local discretization error and the bandwidth of the resulting finite-difference field equations. Numerical studies are presented for the effects of reducing the interior and boundary discretization errors and of mesh refinement on the accuracy and convergence of solutions. It is shown that the proposed scheme, in addition to a number of other advantages, leads to highly accurate results, even when a small number of finite difference intervals is used.

Noor, A. K.↗

On the minimization of the prime power consumption of a coupling-modulated gas laser transmitter

The prime power requirements of a coupling-modulated gas laser transmitter are presented. The latter consists of a gas discharge tube and electro-optic modulator inside a laser resonator. In performing the calculations, the laser discharge length and the modulator voltage are simultaneously varied so that the transmitted power remains constant. In this way, tradeoffs can be made between the prime power supplied individually to the discharge tube and to the modulator driver to obtain a transmitter configuration which minimizes the total prime power consumption. An analytical expression is derived which describes the effects of information bandwidth and transmitter output power on the prime power requirements. Specific numerical results are obtained for a CO2 laser transmitter based on presently available experimental data.

Degnan, J. J.↗

Continental Land Mass Air Traffic Control (COLM ATC)

The application of various satellite systems and techniques relative to providing air traffic control services for the continental United States was studied. Three satellite configurations were reviewed. The characteristics and capabilities of the satellites are described. The study includes consideration for the various ranging waveforms, multiple access alternatives, and the power and bandwidth required as a function of the number of users.

Pecar, J. A.↗

Design and development of a momentum wheel with magnetic bearings

An engineering model momentum wheel with radial magnetic bearings has been designed and developed and successfully operated to a speed of approximately 500 rad/sec. This speed corresponds to a maximum angular momentum of 83 Nm-sec which is 83% of the design value. The maximum momentum achieved was limited by the suspension servo bandwidth and this, in turn, was limited by the lowest structural resonance of the rotor.

Veillette, L. J.↗

NASTRAN multipartitioning and one-shot substructuring

For intermediate size problems where all the data is accessible, the present method of substructuring in three separate phases (for static analysis) is unneccessarily cumbersome. The versatility of NASTRAN's DMAP and internal logic lends itself to finding a practical alternative to these procedures whereby self-contained special-purpose ALTER packages can be written to be run in one pass. Two examples are presented here under the titles of multipartitioning and one-shot substructuring. The flow of multipartitioning resembles that of the present three-phase substructuring. The basic effect is to partition the structure into substructures and operate on each substructure separately. This can be used to reduce the bandwidth of a given problem as well as to store information which will allow a change to be made in one of the substructures in a later run. This latter procedure is carried out in a second program titled one-shot substructuring.

Levy, A.↗