Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analyses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Stress and vibraton analyses of anisotropic shells of revolution

An efficient computational strategy is presented for reducing the cost of the stress and free vibration analyses of laminated anisotropic shells of revolution. The analytical formulation is based on a form of the Sanders-Budiansky shell theory including the effects of both the transverse shear deformation and the laminated anisotropic material response. The fundamental unknowns consist of the eight strain components, the eight stress resultants and the five generalized displacements of the shell. Each of the shell variables is expressed in terms of trigonometric functions (Fourier series) in the circumferential co-ordinate, and a three-field mixed finite element model is used for the discretization in the meridional direction. The shell response associated with a range of Fourier harmonics is approximated by a linear combination of a few global approximation vectors, which are generated at a particular value of the Fourier harmonic, within that range. The full equations of the finite element model are solved for only a single Fourier harmonic, and the response corresponding to the other Fourier harmonics is generated using a reduced system of equations with considerably fewer degrees of freedom.

Noor, Ahmed K.↗

Numerical thermal analyses that contributed to the elimination of turbine blade firtree cracks in the Space Shuttle Main Engine High Pressure Fuel Turbopump turbine

NASA-Marshall has undertaken analytical and experimental efforts to eliminate all turbine blade cracking and further improve the safety and reliability of the SSME. This work is focused on the elimination of cracks at the blade firtree attachment to the disk, in both the first- and second-stage rotors of the High Pressure Fuel Turbopump. Emphasis is placed on thermal analyses that preceded the overall structural evaluation of the blade firtrees. Thermally-induced contributions to the stresses and strains in the firtrees were quantified by these studies, and feasible design improvement options were identified and tested.

Principe, R. S.↗

Solution accuracies of finite element reentry heat transfer and thermal stress analyses of Space Shuttle Orbiter

Accuracies of solutions (structural temperatures and thermal stresses) obtained from different thermal and structural FEMs set up for the Space Shuttle Orbiter (SSO) are compared and discussed. For studying the effect of element size on the solution accuracies of heat-transfer and thermal-stress analyses of the SSO, five SPAR thermal models and five NASTRAN structural models were set up for wing midspan bay 3. The structural temperature distribution over the wing skin (lower and upper) surface of one bay was dome shaped and induced more severe thermal stresses in the chordwise direction than in the spanwise direction. The induced thermal stresses were extremely sensitive to slight variation in structural temperature distributions. Both internal convention and internal radiation were found to have equal effects on the SSO.

Ko, William L.↗

Correlation Functions Aid Analyses Of Spectra

New uses found for correlation functions in analyses of spectra. In approach combining elements of both pattern-recognition and traditional spectral-analysis techniques, spectral lines identified in data appear useless at first glance because they are dominated by noise. New approach particularly useful in measurement of concentrations of rare species of molecules in atmosphere.

Beer, Reinhard↗

System design analyses of a rotating advanced-technology space station for the year 2025

Studies of an advanced technology space station configured to implement subsystem technologies projected for availability in the time period 2000 to 2025 is documented. These studies have examined the practical synergies in operational performance available through subsystem technology selection and identified the needs for technology development. Further analyses are performed on power system alternates, momentum management and stabilization, electrothermal propulsion, composite materials and structures, launch vehicle alternates, and lunar and planetary missions. Concluding remarks are made regarding the advanced technology space station concept, its intersubsystem synergies, and its system operational subsystem advanced technology development needs.

Queijo, M. J.↗

Optimizing for minimum weight when two different finite element models and analyses are required

The Finite Element Structural Optimization Program's (FESOP) ability to perform minimum weight optimization using two different finite element analyses and models is discussed. FESOP uses the ADS optimizer developed by Dr. Garret Vanderplaats to solve the nonlinear constrained optimization problem. The design optimization problem requires a response spectrum analysis and model to evaluate the stress and displacement constraints. However, the problem needs a frequency analysis and model to calculate the natural frequencies used to evaluate the frequency range constraints. The results of both the successful and unsuccessful approaches used to solve this difficult weight minimization problem are summarized. The results show that no one ADS optimization algorithm worked in all cases. However, the Sequential Convex Programming and Modified Method of Feasible Directions algorithms were the most successful.

Hall, Jeffrey C.↗

Analyses of the wind-driven response of tropical oceans

Numerical and analytical models are used to study the upper-ocean response to surface wind stress estimates from the tropical Atlantic and Pacific Oceans. These models are used to identify regions of important variability in the wind field, analyze the oceanic response, and demonstrate the applicability of remotely sensed vector wind stress and altimetry data. Both model and XBT depictions of the mean seasonal cycle, 1979 to 1981, were analyzed along the major ship tracks in the western, central, and eastern tropical Pacific. Model solutions were also used to address array design questions in observing system simulation experiments. Subsequent analyses of the 1982 to 1983 solutions will be performed with respect to differences from the mean seasonal cycle 1979 to 1981, as well as, differences in the three wind products.

Busalacchi, A. J.↗

Reproducible analyses of microbial food for advanced life support systems

The use of yeasts in controlled ecological life support systems (CELSS) for microbial food regeneration in space required the accurate and reproducible analysis of intracellular carbohydrate and protein levels. The reproducible analysis of glycogen was a key element in estimating overall content of edibles in candidate yeast strains. Typical analytical methods for estimating glycogen in Saccharomyces were not found to be entirely aplicable to other candidate strains. Rigorous cell lysis coupled with acid/base fractionation followed by specific enzymatic glycogen analyses were required to obtain accurate results in two strains of Candida. A profile of edible fractions of these strains was then determined. The suitability of yeasts as food sources in CELSS food production processes is discussed.

Petersen, Gene R.↗

Elemental abundance analyses with coadded DAO spectrograms. VI - The mercury-manganese stars Nu Cancri, Iota Coronae Borealis and HR 8349

The elemental abundances of three mercury-manganese stars, Nu Cancri, Iota Coronae Borealis, and HR 8349, were found to be consistent with previous analyses of this series. As Iota CrB is a double-lined spectroscopic binary with a small velocity amplitude for most of its period, its study required determining whether the observed lines were produced in the primary or secondary or both. The derived abundances and effective termperatures were used along with those of mercury-manganese stars previously analyzed in order to extend the study of probable correlations between abundances, with the effective temperature and surface gravity in accordance with radiative diffusion explanations.

Adelman, Saul J.↗

Geology of Southern Guinevere Planitia, Venus, based on analyses of Goldstone radar data

The ensemble of 41 backscatter images of Venus acquired by the S Band (12.6 cm) Goldstone radar system covers approx. 35 million km and includes the equatorial portion of Guinevere Planitia, Navka Planitia, Heng-O Chasma, and Tinatin Planitia, and parts of Devana Chasma and Phoebe Regio. The images and associated altimetry data combine relatively high spatial resolution (1 to 10 km) with small incidence angles (less than 10 deg) for regions not covered by either Venera Orbiter or Arecibo radar data. Systematic analyses of the Goldstone data show that: (1) Volcanic plains dominate, including groups of small volcanic constructs, radar bright flows on a NW-SE arm of Phoebe Regio and on Ushas Mons and circular volcano-tectonic depressions; (2) Some of the regions imaged by Goldstone have high radar cross sections, including the flows on Ushas Mons and the NW-SE arm of Phoebe Regio, and several other unnamed hills, ridged terrains, and plains areas; (3) A 1000 km diameter multiringed structure is observed and appears to have a morphology not observed in Venera data (The northern section corresponds to Heng-O Chasma); (4) A 150 km wide, 2 km deep, 1400 km long rift valley with upturned flanks is located on the western flank of Phoebe Regio and extends into Devana Chasma; (5) A number of structures can be discerned in the Goldstone data, mainly trending NW-SE and NE-SW, directions similar to those discerned in Pioneer-Venus topography throughout the equatorial region; and (6) The abundance of circular and impact features is similar to the plains global average defined from Venera and Arecibo data, implying that the terrain imaged by Goldstone has typical crater retention ages, measured in hundreds of millions of years. The rate of resurfacing is less than or equal to 4 km/Ga.

Arvidson, R. E.↗

An atlas of ECMWF analyses (1980-1987). Part 1: First moment quantities

This document is an atlas of the European Center for Medium Range Weather Forecasts (ECMWF) initialized analyses for 1980 to 1987. Various first moment quantities are presented for monthly, seasonal, and annual averages on a global cylindrical projection, as well as, cross section maps of zonal averages. Global maps of winds, temperature, stream function, and velocity potential are presented at 850 and 200 mb. In addition, global maps of the 300 mb height field (total and eddy), the 500 mb vertical velocity, the 850 mb moisture field, and sea level pressure are presented. The average seasonal cycle and anomalies during the 8 year period are presented for selected quantities.

Schubert, S.↗

Application of finite-element-based solution technologies for viscoplastic structural analyses

Finite-element solution technology developed for use in conjunction with advanced viscoplastic models is described. The development of such solution technology is necessary for performing stress/life analyses of engineering structural problems where the complex geometries and loadings make the conventional analytical solutions difficult. The versatility of the solution technology is demonstrated by applying it to viscoplastic models possessing different mathematical structures and encompassing isotropic and anisotropic material. The computational results qualitatively replicate deformation behavior observed in experiments on prototypical structural components.

Arya, V. K.↗

An atlas of ECMWF analyses (1980-1987). Part 2: Second moment quantities

This document is an atlas based on European Center for Medium Range Weather Forecasts (ECMWF) initialized analyses for 1980-1987. Transports and variance are presented globally at 200 and 850 mb as well as zonally averaged for seasonal and annual averages. Selected fields are filtered to isolate the synoptic (2.5 days is less than periods is less than 6 days) and low frequency (10 days is less than periods is less than 90 days) regions of the spectrum. In addition, time series of the zonally and monthly averaged transports and variances are presented over the entire 8 year period.

Schubert, S.↗

Explosive east coast cyclogenesis over the west-central North Atlantic Ocean - A composite study derived from ECMWF operational analyses

This paper describes the observational aspects of explosive east-coast cyclogenesis using composites constructed from the daily global analyses generated and archived by ECMWF. An explosively deepening storm or bomb is defined as an extratropical cyclone whose mean sea-level pressure falls at least 1 mb/h for 24 h. The ECMWF data sets are used to examine the three-dimensional kinematic and thermodynamic structure of bombs over the entire depth of the troposphere. The evolution and structure of the composite bomb is diagnosed using a moving coordinate system consisting of a box with dimensions of 35 x 35 deg of latitude-longitude. The results reveal that explosive cyclogenesis is a baroclinic phenomenon in which the rapid development in the presence of strong upper tropospheric forcing is most likely enhanced by a highly destabilized lower troposphere.

Manobianco, John↗

The Southern Hemisphere lower stratosphere during August and September 1987 - Analyses based on the United Kingdom Meteorological Office Global Model

This paper presents a series of meteorological analyses used to aid the interpretation of the in situ Airborne Antarctic Ozone Experiment (AAOE) observations obtained aboard the ER-2 and DC-8 aircraft and examines the basis and accuracy of the analytical procedure. Maps and sections of meteorological variables derived from the UK Meteorological Office Global Model are presented for ER-2 and DC-8 flight days. It is found that analyzed temperatures and winds are generally in good agreement with AAOE observations at all levels; minor discrepancies were evident only at DC-8 altitudes. Maps of potential vorticity presented on the 428-K potential temperature surface show that the vortex is essentially circumpolar, although there are periods when major distortions are apparent.

Mckenna, D. S.↗

Atmospheric moisture and cloud structure determined from SSM/I and global gridpoint analyses

Data from the Special Sensor Microwave Imager/I on the DMSP satellite are used to study atmospheric moisture and cloud structure. Column-integrated water vapor and total liquid water retrievals are obtained using an algorithm based on a radiative model for brightness temperature (Wentz, 1983). The results from analyzing microwave and IR measurements are combined with independent global gridpoint analyses to study the distribution and structure of atmospheric moisture over oceanic regions.

Robertson, Franklin R.↗

Buckling and postbuckling analyses of laminated anisotropic structures

A review is given of recent advances in two aspects of the numerical simulation of the buckling and postbuckling responses of composite structures. The first aspect is exploiting non-traditional symmetries exhibited by composite structures; and strategies for reducing the size of the model and the cost of the buckling and postbuckling analyses in the presence of symmetry-breaking conditions (e.g., asymmetry of the material, geometry, and/or loading). The second aspect pertains to the prediction of onset of local delamination in the postbuckling range and accurate determination of transverse shear stresses in the structure. The accuracy and effectiveness of the strategies developed are demonstrated by means of a numerical example.

Noor, Ahmed K.↗

Preliminary analyses of space radiation protection for lunar base surface systems

Radiation shielding analyses are performed for candidate lunar base habitation modules. The study primarily addresses potential hazards due to contributions from the galactic cosmic rays. The NASA Langley Research Center's high energy nucleon and heavy ion transport codes are used to compute propagation of radiation through conventional and regolith shield materials. Computed values of linear energy transfer are converted to biological dose-equivalent using quality factors established by the International Commision of Radiological Protection. Special fluxes of heavy charged particles and corresponding dosimetric quantities are computed for a series of thicknesses in various shield media and are used as an input data base for algorithms pertaining to specific shielded geometries. Dosimetric results are presented as isodose contour maps of shielded configuration interiors. The dose predictions indicate that shielding requirements are substantial, and an abbreviated uncertainty analysis shows that better definition of the space radiation environment as well as improvement in nuclear interaction cross-section data can greatly increase the accuracy of shield requirement predictions.

Nealy, John E.↗