Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ab initio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Rotational study of the NH{sub 3}–CO complex: Millimeter-wave measurements and ab initio calculations

The rotational spectrum of the van der Waals complex NH{sub 3}–CO has been measured with the intracavity OROTRON jet spectrometer in the frequency range of 112–139 GHz. Newly observed and assigned transitions belong to the K = 0–0, K = 1–1, K = 1–0, and K = 2–1 subbands correlating with the rotationless (j{sub k}){sub NH3} = 0{sub 0} ground state of free ortho-NH{sub 3} and the K = 0–1 and K = 2–1 subbands correlating with the (j{sub k}){sub NH3} = 1{sub 1} ground state of free para-NH{sub 3}. The (approximate) quantum number K is the projection of the total angular momentum J on the intermolecular axis. Some of these transitions are continuations to higher J values of transition series observed previously [C. Xia et al., Mol. Phys. 99, 643 (2001)], the other transitions constitute newly detected subbands. The new data were analyzed together with the known millimeter-wave and microwave transitions in order to determine the molecular parameters of the ortho-NH{sub 3}–CO and para-NH{sub 3}–CO complexes. Accompanying ab initio calculations of the intermolecular potential energy surface (PES) of NH{sub 3}–CO has been carried out at the explicitly correlated coupled cluster level of theory with single, double, and perturbative triple excitations and an augmented correlation-consistent triple zeta basis set. The global minimum of the five-dimensional PES corresponds to an approximately T-shaped structure with the N atom closest to the CO subunit and binding energy D{sub e} = 359.21 cm{sup −1}. The bound rovibrational levels of the NH{sub 3}–CO complex were calculated for total angular momentum J = 0–6 on this intermolecular potential surface and compared with the experimental results. The calculated dissociation energies D{sub 0} are 210.43 and 218.66 cm{sup −1} for ortho-NH{sub 3}–CO and para-NH{sub 3}–CO, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BH{sub 2} revisited: New, extensive measurements of laser-induced fluorescence transitions and ab initio calculations of near-spectroscopic accuracy

The spectroscopy of gas phase BH{sub 2} has not been explored experimentally since the pioneering study of Herzberg and Johns in 1967. In the present work, laser-induced fluorescence (LIF) spectra of the A{sup ~} {sup 2}B{sub 1}(Π{sub u})−X{sup ~2}A{sub 1} band system of {sup 11}BH{sub 2}, {sup 10}BH{sub 2}, {sup 11}BD{sub 2}, and {sup 10}BD{sub 2} have been observed for the first time. The free radicals were “synthesized” by an electric discharge through a precursor mixture of 0.5% diborane (B{sub 2}H{sub 6} or B{sub 2}D{sub 6}) in high pressure argon at the exit of a pulsed valve. A total of 67 LIF bands have been measured and rotationally analyzed, 62 of them previously unobserved. These include transitions to a wide variety of excited state bending levels, to several stretch-bend combination levels, and to three ground state levels which gain intensity through Renner-Teller coupling to nearby excited state levels. As an aid to vibronic assignment of the spectra, very high level hybrid ab initio potential energy surfaces were built starting from the coupled cluster singles and doubles with perturbative triples (CCSD(T))/aug-cc-pV5Z level of theory for this seven-electron system. In an effort to obtain the highest possible accuracy, the potentials were corrected for core correlation, extrapolation to the complete basis set limit, electron correlation beyond CCSD(T), and diagonal Born-Oppenheimer effects. The spin-rovibronic states of the various isotopologues of BH{sub 2} were calculated for energies up to 22 000 cm{sup −1} above the X{sup ~} (000) level without any empirical adjustment of the potentials or fitting to experimental data. The agreement with the new LIF data is excellent, approaching near-spectroscopic accuracy (a few cm{sup −1}) and has allowed us to understand the complicated spin-rovibronic energy level structure even in the region of strong Renner-Teller resonances.

74 ATOMIC AND MOLECULAR PHYSICS↗

Assignment of the Fundamental Modes of Hydroxyacetone Using Gas-Phase Infrared, Far-Infrared, Raman, and ab Initio Methods: Band Strengths for Atmospheric Measurements

Hydroxyacetone (acetol) is a simple organic molecule of interest in both the astrophysical and atmospheric communities, having recently been observed in biomass burning events, as well as a known degradation product of isoprene oxidation. However, its vibrational assignment has never been fully completed, and few quantitative data are available for its detection via infrared spectroscopy. Our recent acquisition of both the pressure-broadened gas-phase data and the far-IR spectra now allow for unambiguous assignment of several (new) bands. In particular, the observed C-type bands of several fundamentals (particularly in the far-infrared) and a few combination bands demonstrate that the monomer is in a planar (Cs) conformation, at least a majority of the time. As suggested by other researchers, the monomer is a cis-cis conformer stabilized by an intramolecular O—H···O=C hydrogen bond forming a five-membered planar ring structure. Band assignments in the Cs point group are justified (at least for a good fraction of the molecules in the ensemble) by the presence of the C-type bands. The results and band assignments are well confirmed by both ab initio MP2-ccpvtz calculations as well as GAMESS (B3LYP) theoretical calculations. In addition, using vetted methods for quantitative measurements, we report the first IR absorption band strengths of acetol (also in electronic format) that can be used for atmospheric monitoring and other applications.

Lindenmaier, Rodica↗

Ab initio structural modeling of and experimental validation for Chlamydia trachomatis protein CT296 reveal structural similarity to Fe(II) 2-oxoglutarate-dependent enzymes

Chlamydia trachomatis is a medically important pathogen that encodes a relatively high percentage of proteins with unknown function. The three-dimensional structure of a protein can be very informative regarding the protein's functional characteristics; however, determining protein structures experimentally can be very challenging. Computational methods that model protein structures with sufficient accuracy to facilitate functional studies have had notable successes. To evaluate the accuracy and potential impact of computational protein structure modeling of hypothetical proteins encoded by Chlamydia, a successful computational method termed I-TASSER was utilized to model the three-dimensional structure of a hypothetical protein encoded by open reading frame (ORF) CT296. CT296 has been reported to exhibit functional properties of a divalent cation transcription repressor (DcrA), with similarity to the Escherichia coli iron-responsive transcriptional repressor, Fur. Unexpectedly, the I-TASSER model of CT296 exhibited no structural similarity to any DNA-interacting proteins or motifs. To validate the I-TASSER-generated model, the structure of CT296 was solved experimentally using X-ray crystallography. Impressively, the ab initio I-TASSER-generated model closely matched (2.72-{angstrom} C{alpha} root mean square deviation [RMSD]) the high-resolution (1.8-{angstrom}) crystal structure of CT296. Modeled and experimentally determined structures of CT296 share structural characteristics of non-heme Fe(II) 2-oxoglutarate-dependent enzymes, although key enzymatic residues are not conserved, suggesting a unique biochemical process is likely associated with CT296 function. Additionally, functional analyses did not support prior reports that CT296 has properties shared with divalent cation repressors such as Fur.

59 BASIC BIOLOGICAL SCIENCES↗

Ab initio prediction of fast non-equilibrium transport of nascent polarons in SrI 2 : a key to high-performance scintillation [First-principles study of hole polaron formation and migration in strontium iodide]

The excellent light yield proportionality of europium-doped strontium iodide (SrI 2 :Eu) has resulted in state-of-the-art γ-ray detectors with remarkably high-energy resolution, far exceeding that of most halide compounds. In this class of materials, the formation of self-trapped hole polarons is very common. However, polaron formation is usually expected to limit carrier mobilities and has been associated with poor scintillator light-yield proportionality and resolution. Here using a recently developed first-principles method, we perform an unprecedented study of polaron transport in SrI 2 , both for equilibrium polarons, as well as nascent polarons immediately following a self-trapping event. We propose a rationale for the unexpected high-energy resolution of SrI 2 . We identify nine stable hole polaron configurations, which consist of dimerised iodine pairs with polaron-binding energies of up to 0.5 eV. They are connected by a complex potential energy landscape that comprises 66 unique nearest-neighbour migration paths. Ab initio molecular dynamics simulations reveal that a large fraction of polarons is born into configurations that migrate practically barrier free at room temperature. Consequently, carriers created during γ-irradiation can quickly diffuse away reducing the chance for nonlinear recombination, the primary culprit for non-proportionality and resolution reduction. We conclude that the flat, albeit complex, landscape for polaron migration in SrI 2 is a key for understanding its outstanding performance. This insight provides important guidance not only for the future development of high-performance scintillators but also of other materials, for which large polaron mobilities are crucial such as batteries and solid-state ionic conductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Candidate ferroelectrics via ab initio high-throughput screening of polar materials

Ferroelectrics are a class of polar and switchable functional materials with diverse applications, from microelectronics to energy conversion. Computational searches for new ferroelectric materials have been constrained by accurate prediction of the polarization and switchability with electric field, properties that, in principle, require a comparison with a nonpolar phase whose atomic-scale unit cell is continuously deformable from the polar ground state. For most polar materials, such a higher-symmetry nonpolar phase does not exist or is unknown. Here, we introduce a general high-throughput workflow that screens polar materials as potential ferroelectrics. We demonstrate our workflow on 1978 polar structures in the Materials Project database, for which we automatically generate a nonpolar reference structure using pseudosymmetries, and then compute the polarization difference and energy barrier between polar and nonpolar phases, comparing the predicted values to known ferroelectrics. Focusing on a subset of 182 potential ferroelectrics, we implement a systematic ranking strategy that prioritizes candidates with large polarization and small polar-nonpolar energy differences. To assess stability and synthesizability, we combine information including the computed formation energy above the convex hull, the Inorganic Crystal Structure Database id number, a previously reported machine learning-based synthesizability score, and ab initio phonon band structures. To distinguish between previously reported ferroelectrics, materials known for alternative applications, and lesser-known materials, we combine this ranking with a survey of the existing literature on these candidates through Google Scholar and Scopus databases, revealing ~130 promising materials uninvestigated as ferroelectric. Our workflow and large-scale high-throughput screening lays the groundwork for the discovery of novel ferroelectrics, revealing numerous candidates materials for future experimental and theoretical endeavors.

36 MATERIALS SCIENCE↗

Ab initio DFT+U Study of He Atom Incorporation into UO2 Crystals

We present and discuss results of the density functional theory (DFT) for perfect UO2 crystals with He atoms in octahedral interstitial positions therein. We have calculated basic bulk crystal properties and He incorporation energies into the low temperature anti-ferromagnetic UO2 phase using several exchange–correlation functionals within the spin-polarized local density (LDA) and generalized gradient (GGA) approximations. In all DFT calculations we included the on-site correlation corrections using the Hubbard model (DFT+U approach). We analysed a potential crystalline symmetry reduction from tetragonal down to orthorhombic structure and confirmed the presence of the Jahn–Teller effect in a perfect UO2. We discuss also the problem of a conducting electronic state arising when He is placed into a tetragonal antiferromagnetic phase of UO2 commonly used in defect modelling. Consequently, we found a specific monoclinic lattice distortion which allowed us to restore the semiconducting state and properly estimate He incorporation energies. Unlike the bulk properties, the He incorporation energy strongly depends on several factors, including the supercell size, the use of spin polarization, the exchange–correlation functionals and on-site correlation corrections. We compare our results for the He incorporation with the previous shell model and ab initio DFT calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ab Initio Enhanced calphad Modeling of Actinide-Rich Nuclear Fuels

The process of fuel recycling is central to the Advanced Fuel Cycle Initiative (AFCI), where plutonium and the minor actinides (MA) Am, Np, and Cm are extracted from spent fuel and fabricated into new fuel for a fast reactor. Metallic alloys of U-Pu-Zr-MA are leading candidates for fast reactor fuels and are the current basis for fast spectrum metal fuels in a fully recycled closed fuel cycle. Safe and optimal use of these fuels will require knowledge of their multicomponent phase stability and thermodynamics (Gibbs free energies). In additional to their use as nuclear fuels, U-Pu-Zr-MA contain elements and alloy phases that pose fundamental questions about electronic structure and energetics at the forefront of modern many-body electron theory. This project will validate state-of-the-art electronic structure approaches for these alloys and use the resulting energetics to model U-Pu-Zr-MA phase stability. In order to keep the work scope practical, researchers will focus on only U-Pu-Zr-{Np,Am}, leaving Cm for later study. The overall objectives of this project are to: Provide a thermodynamic model for U-Pu-Zr-MA for improving and controlling reactor fuels; and, Develop and validate an ab initio approach for predicting actinide alloy energetics for thermodynamic modeling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ab initio quantum mechanical/molecular mechanical simulation of electron transfer process: Fractional electron approach

Electron transfer (ET) reactions are one of the most important processes in chemistry and biology. Because of the quantum nature of the processes and the complicated roles of the solvent, theoretical study of ET processes is challenging. To simulate ET processes at the electronic level, we have developed an efficient density functional theory (DFT) quantum mechanical (QM)/molecular mechanical (MM) approach that uses the fractional number of electrons as the order parameter to calculate the redox free energy of ET reactions in solution. We applied this method to study the ET reactions of the aqueous metal complexes Fe(H{sub 2}O){sub 6}{sup 2+/3+} and Ru(H{sub 2}O){sub 6}{sup 2+/3+}. The calculated oxidation potentials, 5.82 eV for Fe(II/III) and 5.14 eV for Ru(II/III), agree well with the experimental data, 5.50 and 4.96 eV, for iron and ruthenium, respectively. Furthermore, we have constructed the diabatic free energy surfaces from histogram analysis based on the molecular dynamics trajectories. The resulting reorganization energy and the diabatic activation energy also show good agreement with experimental data. Our calculations show that using the fractional number of electrons (FNE) as the order parameter in the thermodynamic integration process leads to efficient sampling and validate the ab initio QM/MM approach in the calculation of redox free energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interatomic Coulombic decay in a He dimer: Ab initio potential-energy curves and decay widths

The energy gained by either of the two helium atoms in a helium dimer through simultaneous ionization and excitation can be efficiently transferred to the other helium atom, which then ionizes. The respective relaxation process called interatomic Coulombic decay (ICD) is the subject of the present paper. Specifically, we are interested in ICD of the lowest of the ionized excited states, namely, the He{sup +}(n=2)He states, for which we calculated the relevant potential-energy curves and the interatomic decay widths. The full-configuration interaction method was used to obtain the potential-energy curves. The decay widths were computed by utilizing the Fano ansatz, Green's-function methods, and the Stieltjes imaging technique. The behavior of the decay widths with the interatomic distance is examined and is elucidated, whereby special emphasis is given to the asymptotically large interatomic separations. Our calculations show that the electronic ICD processes dominate over the radiative decay mechanisms over a wide range of interatomic distances. The ICD in the helium dimer has recently been measured by Havermeier et al. [Phys. Rev. Lett. 104, 133401 (2010)]. The impact of nuclear dynamics on the ICD process is extremely important and is discussed by Sisourat et al. [Nat. Phys. 6, 508 (2010)] based on the ab initio data computed in the present paper.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ab initio calculation of the electronic absorption spectrum of liquid water

The electronic absorption spectrum of liquid water was investigated by coupling a one-body energy decomposition scheme to configurations generated by classical and Born-Oppenheimer Molecular Dynamics (BOMD). A Frenkel exciton Hamiltonian formalism was adopted and the excitation energies in the liquid phase were calculated with the equation of motion coupled cluster with single and double excitations method. Molecular dynamics configurations were generated by different approaches. Classical MD were carried out with the TIP4P-Ew and AMOEBA force fields. The BLYP and BLYP-D3 exchange-correlation functionals were used in BOMD. Theoretical and experimental results for the electronic absorption spectrum of liquid water are in good agreement. Emphasis is placed on the relationship between the structure of liquid water predicted by the different models and the electronic absorption spectrum. The theoretical gas to liquid phase blue-shift of the peak positions of the electronic absorption spectrum is in good agreement with experiment. The overall shift is determined by a competition between the O–H stretching of the water monomer in liquid water that leads to a red-shift and polarization effects that induce a blue-shift. The results illustrate the importance of coupling many-body energy decomposition schemes to molecular dynamics configurations to carry out ab initio calculations of the electronic properties in liquid phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of thermal history on the photostructural changes in glassy As{sub 15}S{sub 85} studied by Raman scattering and ab initio calculations

Photostructural changes—the hallmark of non-crystalline chalcogenides—are in essence the basis of a number of photoinduced effects, i.e., changes of their physical properties, which are exploited in a variety of applications, especially in photonics and optoelectronics. Despite the vast number of investigations of photostructural changes, there is currently lack of systematic studies on how the thermal history, which affects glass structure, modifies the extent of photostructural changes. In this article, we study the role of thermal history on photostructural changes in glassy As{sub 15}S{sub 85}. This particular sulfur-rich composition has been chosen based on the colossal photostructural response it exhibits under near-band gap light irradiation, which inherently originates from its nanoscale phase-separated nature. To control the thermal history, the glass was quenched to various temperatures and each of these quenched products was annealed under four different conditions. Off-resonant Raman scattering was used to study the equilibrium study of each product. Structural changes of interest involve changes of the sulfur atoms participating into S{sub 8} rings and S{sub n} chains. Their ratio was found to depend on quenching/annealing conditions. Near-band gap light was used to perturb the rings-to-chain ratio and at the same time to record these changes through Raman scattering, revealing an intricate behavior of photostructural changes. Ab initio calculations were employed to determine the stability of various sulfur clusters/molecules thus aiding the correlation of the particular photo-response of glassy As{sub 15}S{sub 85} with its structural constituents.

36 MATERIALS SCIENCE↗

Photomagnetic Switching of Heterometallic Complexes [M(dmf)[subscript 4](H[subscript 2]O)[subscript 3]([mu]-CN)Fe(CN)[subscript 5]]H[subscript 2]O (M=Nd, La, Gd, Y) Analyzed by Single-Crystal X-ray Diffraction and Ab Initio Theory

Single-crystal X-ray diffraction measurements have been carried out on [Nd(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (1; dmf=dimethylformamide), [Nd(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Co(CN){sub 5}]{center_dot}H{sub 2}O (2), [La(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (3), [Gd(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (4), and [Y(dmf){sub 4}(H{sub 2}O){sub 3}({mu}-CN)Fe(CN){sub 5}]{center_dot}H{sub 2}O (5), at 15(2) K with and without UV illumination of the crystals. Significant changes in unit-cell parameters were observed for all the iron-containing complexes, whereas 2 showed no response to UV illumination. Photoexcited crystal structures have been determined for 1, 3, and 4 based on refinements of two-conformer models, and excited-state occupancies of 78.6(1), 84(6), and 86.6(7) % were reached, respectively. Significant bond-length changes were observed for the Fe-ligand bonds (up to 0.19 {angstrom}), the cyano bonds (up to 0.09{angstrom}), and the lanthanide-ligand bonds (up to 0.10{angstrom}). Ab initio theoretical calculations were carried out for the experimental ground-state geometry of 1 to understand the electronic structure changes upon UV illumination. The calculations suggest that UV illumination gives a charge transfer from the cyano groups on the iron atom to the lanthanide ion moiety, {l_brace}Nd(dmf){sub 4}(H{sub 2}O){sub 3}{r_brace}, with a distance of approximately 6 {angstrom} from the iron atom. The charge transfer is accompanied by a reorganization of the spin state on the {l_brace}Fe(CN)6{r_brace} complex, and a change in geometry that produces a metastable charge-transfer state with an increased number of unpaired electrons, thus accounting for the observed photomagnetic effect.

36 MATERIALS SCIENCE↗

Toward a W4-F12 approach: Can explicitly correlated and orbital-based ab initio CCSD(T) limits be reconciled?

In the context of high-accuracy computational thermochemistry, the valence coupled cluster with all singles and doubles (CCSD) correlation component of molecular atomization energies presents the most severe basis set convergence problem, followed by the (T) component. In the present paper, we make a detailed comparison, for an expanded version of the W4-11 thermochemistry benchmark, between, on the one hand, orbital-based CCSD/AV{5,6}Z + d and CCSD/ACV{5,6}Z extrapolation, and on the other hand CCSD-F12b calculations with cc-pVQZ-F12 and cc-pV5Z-F12 basis sets. This latter basis set, now available for H–He, B–Ne, and Al–Ar, is shown to be very close to the basis set limit. Apparent differences (which can reach 0.35 kcal/mol for systems like CCl{sub 4}) between orbital-based and CCSD-F12b basis set limits disappear if basis sets with additional radial flexibility, such as ACV{5,6}Z, are used for the orbital calculation. Counterpoise calculations reveal that, while total atomization energies with V5Z-F12 basis sets are nearly free of BSSE, orbital calculations have significant BSSE even with AV(6 + d)Z basis sets, leading to non-negligible differences between raw and counterpoise-corrected extrapolated limits. This latter problem is greatly reduced by switching to ACV{5,6}Z core-valence basis sets, or simply adding an additional zeta to just the valence orbitals. Previous reports that all-electron approaches like HEAT (high-accuracy extrapolated ab-initio thermochemistry) lead to different CCSD(T) limits than “valence limit + CV correction” approaches like Feller-Peterson-Dixon and Weizmann-4 (W4) theory can be rationalized in terms of the greater radial flexibility of core-valence basis sets. For (T) corrections, conventional CCSD(T)/AV{Q,5}Z + d calculations are found to be superior to scaled or extrapolated CCSD(T)-F12b calculations of similar cost. For a W4-F12 protocol, we recommend obtaining the Hartree-Fock and valence CCSD components from CCSD-F12b/cc-pV{Q,5}Z-F12 calculations, but the (T) component from conventional CCSD(T)/aug’-cc-pV{Q,5}Z + d calculations using Schwenke’s extrapolation; post-CCSD(T), core-valence, and relativistic corrections are to be obtained as in the original W4 theory. W4-F12 is found to agree slightly better than W4 with ATcT (active thermochemical tables) data, at a substantial saving in computation time and especially I/O overhead. A W4-F12 calculation on benzene is presented as a proof of concept.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The thermal decomposition of NH{sub 2}OH and subsequent reactions : ab initio transition state theory and reflected shock tube experiments.

Primary and secondary reactions involved in the thermal decomposition of NH{sub 2}OH are studied with a combination of shock tube experiments and transition state theory based theoretical kinetics. This coupled theory and experiment study demonstrates the utility of NH{sub 2}OH as a high temperature source of OH radicals. The reflected shock technique is employed in the determination of OH radical time profiles via multipass electronic absorption spectrometry. O-atoms are searched for with atomic resonance absorption spectrometry. The experiments provide a direct measurement of the rate coefficient, k{sub 1}, for the thermal decomposition of NH{sub 2}OH. Secondary rate measurements are obtained for the NH{sub 2} + OH (5a) and NH{sub 2}OH + OH (6a) abstraction reactions. The experimental data are obtained for temperatures in the range from 1355 to 1889 K and are well represented by the respective rate expressions: log[k/(cm{sup 3} molecule{sup -1} s{sup -1})] = (?10.12 {+-} 0.20) + (?6793 {+-} 317 K/T) (k{sub 1}); log[k/(cm{sup 3} molecule{sup -1} s{sup -1})] = (?10.00 {+-} 0.06) + (?879 {+-} 101 K/T) (k{sub 5a}); log[k/(cm{sup 3} molecule{sup -1} s{sup -1})] = (?9.75 {+-} 0.08) + (?1248 {+-} 123 K/T) (k{sub 6a}). Theoretical predictions are made for these rate coefficients as well for the reactions of NH{sub 2}OH + NH{sub 2}, NH{sub 2}OH + NH, NH + OH, NH{sub 2} + NH{sub 2}, NH{sub 2} + NH, and NH + NH, each of which could be of secondary importance in NH{sub 2}OH thermal decomposition. The theoretical analyses employ a combination of ab initio transition state theory and master equation simulations. Comparisons between theory and experiment are made where possible. Modest adjustments of predicted barrier heights (i.e., by 2 kcal/mol or less) generally yield good agreement between theory and experiment. The rate coefficients obtained here should be of utility in modeling NO{sub x} in various combustion environments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ab initio coupled-cluster and configuration interaction calculations for {sup 16}O using the V{sub UCOM} interaction

Using the ground-state energy of {sup 16}O obtained with the realistic V{sub UCOM} interaction as a test case, we present a comprehensive comparison of different configuration interaction (CI) and coupled-cluster (CC) methods, analyzing the intrinsic advantages and limitations of each of the approaches. In particular, we use the importance-truncated (IT) CI and no-core shell model (NCSM) schemes with up to 4-particle-4-hole (4p4h) excitations, with and without the Davidson extensivity corrections, as well as the size extensive CC methods with a complete treatment of one- and two-body clusters (CCSD) and a noniterative treatment of connected three-body clusters via the completely renormalized correction to the CCSD energy defining the CR-CC(2,3) approach, which are all capable of handling larger systems with dozens of explicitly correlated fermions. We discuss the impact of the center-of-mass contaminations, the choice of the single-particle basis, and size-extensivity on the resulting energies. When the IT-CI and IT-NCSM methods include the 4p4h excitations and when the CC calculations include the 1p1h, 2p2h, and 3p3h clusters, as in the CR-CC(2,3) approach, we observe an excellent agreement among the different methodologies, particularly when the Davidson extensivity corrections are added to the IT-CI energies and the effects of the connected three-body clusters are accounted for in the CC calculations. This shows that despite their individual limitations, the IT-CI, IT-NCSM, and CC methods can provide precise and consistent ab initio nuclear structure predictions. Furthermore, the IT-CI, IT-NCSM, and CC ground-state energy values obtained for {sup 16}O are in reasonable agreement with the experimental value, providing further evidence that the V{sub UCOM} two-body interaction may allow for a good description of binding energies for heavier nuclei and that all of the methods used in this study account for most of the relevant particle correlation effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Interaction of a pseudo-π C—C bond with cuprous and argentous chlorides: Cyclopropane⋯CuCl and cyclopropane⋯AgCl investigated by rotational spectroscopy and ab initio calculations

Strongly bound complexes (CH{sub 2}){sub 3}⋯MCl (M = Cu or Ag), formed by non-covalent interaction of cyclopropane and either cuprous chloride or argentous chloride, have been generated in the gas phase by means of the laser ablation of either copper or silver metal in the presence of supersonically expanded pulses of a gas mixture containing small amounts of cyclopropane and carbon tetrachloride in a large excess of argon. The rotational spectra of the complexes so formed were detected with a chirped-pulse, Fourier transform microwave spectrometer and analysed to give rotational constants and Cu and Cl nuclear quadrupole coupling constants for eight isotopologues of each of (CH{sub 2}){sub 3}⋯CuCl and (CH{sub 2}){sub 3}⋯AgCl. The geometry of each of these complexes was established unambiguously to have C{sub 2v} symmetry, with the three C atoms coplanar, and with the MCl molecule lying along a median of the cyclopropane C{sub 3} triangle. This median coincides with the principal inertia axis a in each of the two complexes (CH{sub 2}){sub 3}⋯MCl. The M atom interacts with the pseudo-π bond linking the pair of equivalent carbon atoms {sup F}C (F = front) nearest to it, so that M forms a non-covalent bond to one C—C edge of the cyclopropane molecule. The (CH{sub 2}){sub 3}⋯MCl complexes have similar angular geometries to those of the hydrogen- and halogen-bonded analogues (CH{sub 2}){sub 3}⋯HCl and (CH{sub 2}){sub 3}⋯ClF, respectively. Quantitative details of the geometries were determined by interpretation of the observed rotational constants and gave results in good agreement with those from ab initio calculations carried out at the CCSD(T)(F12*)/aug-cc-pVTZ-F12 level of theory. Interesting geometrical features are the lengthening of the {sup F}C—{sup F}C bond and the shrinkage of the two equivalent {sup B}C—{sup F}C (B = back) bonds relative to the C—C bond in cyclopropane itself. The expansions of the {sup F}C—{sup F}C bond are 0.1024(9) Å and 0.0727(17) Å in (CH{sub 2}){sub 3}⋯CuCl and (CH{sub 2}){sub 3}⋯AgCl, respectively, according to the determined r{sub 0} geometries. The C—C bond lengthening is in each case about four times that observed by similar methods in the corresponding complexes of MCl with ethyne and ethene, even though the cyclopropane complexes are more weakly bound than their ethyne and ethene analogues. Reasons for the larger increase in r(CC) in the pseudo-π complexes are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio quantum scattering calculations and a new potential energy surface for the HCl( X 1Σ+)–O2(X3Σg−) system: Collision-induced line shape parameters for O2-perturbed R(0) 0–0 line in H35Cl

The remote sensing of abundance and properties of HCl—the main atmospheric reservoir of Cl atoms that directly participate in ozone depletion—is important for monitoring the partitioning of chlorine between “ozone-depleting” and “reservoir” species. Such remote studies require knowledge of the shapes of molecular resonances of HCl, which are perturbed by collisions with the molecules of the surrounding air. In this work, we report the first fully quantum calculations of collisional perturbations of the shape of a pure rotational line in H35Cl perturbed by an air-relevant molecule [as the first model system we choose the R(0) line in HCl perturbed by O2]. The calculations are performed on our new highly accurate HCl(X1Σ+)–O2(X3Σg−) potential energy surface. In addition to pressure broadening and shift, we also determine their speed dependencies and the complex Dicke parameter. This gives important input to the community discussion on the physical meaning of the complex Dicke parameter and its relevance for atmospheric spectra (previously, the complex Dicke parameter for such systems was mainly determined from phenomenological fits to experimental spectra and the physical meaning of its value in that context is questionable). We also calculate the temperature dependence of the line shape parameters and obtain agreement with the available experimental data. We estimate the total combined uncertainties of our calculations at 2% relative root-mean-square error in the simulated line shape at 296 K. This result constitutes an important step toward computational population of spectroscopic databases with accurate ab initio line shape parameters for molecular systems of terrestrial atmospheric importance.

Chemistry↗