Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Waveforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

The formation of terrains antipodal to major impacts

The SALE, or Simplified Arbitrary Lagrangian Eulerian code is presently used to calculate the antipodal pressures generated by large impacts on icy satellites and planets of various compositions and core sizes. While in a high density core/lower density mantle planet there is a refraction of the incident pressure wave away from the antipode by the core, resulting in a low antipodal pressure, a planet with a low velocity core with a higher-wave speed mantle will focus the waveform to maximize antipodal pressure. Specific impact basins on the moon, Mercury, and several icy satellites are modeled to ascertain whether the impacts were capable of producing the observed antipodal features.

Watts, Alison W.↗

PC 3,4 magnetic pulsations observed simultaneously in the magnetosphere and at multiple ground stations

Periods of magnetic conjugacy between ISEE and the magnetometer array of the Institute for Geological Sciences have been examined to search for the simultaneous occurrence of Pc 3,4 magnetic pulsations. When compressional waves are seen in space, waves are also observed on the ground at the same frequency and with similar waveforms. The wave amplitude on the ground at midlatitudes is similar to that in space at ISEE but at high latitudes the amplitudes are larger than in space. The one occurrence of a purely transverse signal at ISEE was not observed on the ground. These results confirm that Pc 3,4 wave energy is most readily transported through the magnetosphere by compressional fluctuations.

Odera, T. J.↗

The rate of neutron star binary mergers in the universe - Minimal predictions for gravity wave detectors

Of the many sources which gravitational wave observatories might see, merging neutron star binaries are the most predictable. Their waveforms at the observable frequencies are easy to calculate. And three systems which will merge in less than a Hubble time have already been observed as binary pulsars: two in the disk of the Galaxy, and one in a globular cluster. From the lifetimes and positions of these, a lower limit to the merger rate in the Galaxy and globular cluster system are inferred with confidence. Taking the merger rate in other galaxies to scale with the star formation rate, the merger rate expected in the local universe is computed. An ultraconservative lower limit to the rate gives three per year within 1 Gpc. The best estimate, still conservative in that it considers only systems like those already observed, gives three per year within 200 Mpc. An upper limit of three mergers per year within 23/h Mpc is set by the rate of Type Ib supernovae. The rates of black hole binary mergers and black hole-neutron star binary mergers are model-dependent, but could be comparable to the given rate of neutron-star binary mergers.

Phinney, E. S.↗

Behavior Of Costas Loop In Reception Of Telemetry

Report presents study of behavior of Costas loop in reception of binary non-return-to-zero telemetry signal phase-shift-modulated onto sinusoidal or square-wave subcarrier signal in turn phase-modulated onto carrier signal. Equations describe degradation of performance of Costas loop in terms of phase jitter, conditions causing loss of lock, and other effects. Costas loop used to track telemetry signal with residual carrier in presence of Doppler shift. Performance optimized by suitable choice of bit rate, waveform and frequency of subcarrier, and noise bandwidth of filters in arms of Costas loop.

Nguyen, Tien Manh↗

Sources of noise in magneto-optical readout

The various sources of noise which are often encountered in magneto-optical readout systems are analyzed. Although the focus is on magneto-optics, most sources of noise are common among the various optical recording systems and one can easily adapt the results to other media and systems. A description of the magneto-optical readout system under consideration is given, and the standard methods and the relevant terminology of signal and noise measurement are described. The characteristics of thermal noise, which originates in the electronic circuitry of the readout system, are described. The most fundamental of all sources of noise, the shot noise, is considered, and a detailed account of its statistical properties is given. Shot noise, which is due to random fluctuations in photon arrival times, is an ever-present noise in optical detection. Since the performance of magneto-optical recording devices in use today is approaching the limit imposed by the shot noise, it is important that the reader have a good grasp of this particular source of noise. A model for the laser noise is described, and measurement results which yield numerical values for the strength of the laser power fluctuations are presented. Spatial variations of the disk reflectivity and random depolarization phenomena also contribute to the overall level of noise in readout; these and related issues are treated. Numerical simulation results describing some of the more frequently encountered sources of noise which accompany the recorded waveform itself, namely, jitter noise and signal-amplitude fluctuation noise are presented.

Mansuripur, M.↗

Ranging performance of satellite laser altimeters

Topographic mapping of the earth, moon and planets can be accomplished with high resolution and accuracy using satellite laser altimeters. These systems employ nanosecond laser pulses and microradian beam divergences to achieve submeter vertical range resolution from orbital altitudes of several hundred kilometers. Here, we develop detailed expressions for the range and pulse width measurement accuracies and use the results to evaluate the ranging performances of several satellite laser altimeters currently under development by NASA for launch during the next decade. Our analysis includes the effects of the target surface characteristics, spacecraft pointing jitter and waveform digitizer characteristics. The results show that ranging accuracy is critically dependent on the pointing accuracy and stability of the altimeter especially over high relief terrain where surface slopes are large. At typical orbital altitudes of several hundred kilometers, single-shot accuracies of a few centimeters can be achieved only when the pointing jitter is on the order of 10 mu rad or less.

Gardner, Chester S.↗

Crab pulsar giant pulses: Simultaneous radio and GRO observations

Observations are reported of the Crab pulsar made at radio frequencies concurrent with Oriented Scintillation Spectrometer Experiment (OSSE) observations from 15 to 27 May 1991. Using the 43 m telescope at Green Bank at 0.8 and 1.4 GHz, samples were made continuously for 10 hrs/day at intervals of 100 to 300 microsecs. The analysis of the radio data includes calculation of histograms of pulse intensities, absolute timing to about 20 microsec precision, and characterization of intensity variations on time scales from the 33 ms spin period to days. The most detailed analysis is presented made of giant pulses. The ultimate goal is to bin the radio data into giant and nongiant pulses and to form average waveforms of OSSE data for the corresponding pulse periods. A test is done to see whether the violet radio fluctuations (which are not seen in other radio pulsars to the same degree) are correlated with low energy gamma rays, yielding constraints on the radio coherence mechanism and the steadiness of the electron-positron outflow in the magnetosphere. Timing analysis of the radio data provides a well defined ephemeris over the specified range of epochs. The gamma ray pulse phase was predicted with an error of less than 70 microsecs.

Lundgren, Scott C.↗

Rate 8/9 coded 8-PSK system for downlink applications

An advanced Coded Trellis Modulation (CTM) System which achieves a 2 bits/s/Hz bandwidth efficiency at an information rate of 200 Mbit/s while minimizing satellite power requirements, was developed for downlink earth station applications. The CTM system employs a high-speed rate 8/9 convolutional code with Viterbi decoding and an 8-Phase Shift Keying (PSK) modem. The minimum Euclidean distance between the modulated waveforms corresponding to the information sequences are maximized in order to maximize the noise immunity of the system. Nyquist filters with a square-root of 40 percent roll-off are used at the transmit and receive sides of the modem in order to minimize intersymbol interference, adjacent channel interference, and distortion at the nonlinear satellite power amplifier. The use of a coded system here also minimizes the effects of co-channel interference. The developed performance of the hardware system was measured to achieve within 1.5 dB from theory at a bit error rate of 5 x 10(exp -7) over an additive white Gaussian noise channel.

Fang, Russell↗

Electromechanical systems with transient high power response operating from a resonant AC link

The combination of an inherently robust asynchronous (induction) electrical machine with the rapid control of energy provided by a high frequency resonant AC link enables the efficient management of higher power levels with greater versatility. This could have a variety of applications from launch vehicles to all-electric automobiles. These types of systems utilize a machine which is operated by independent control of both the voltage and frequency. This is made possible by using an indirect field-oriented control method which allows instantaneous torque control in all four operating quadrants. Incorporating the AC link allows the converter in these systems to switch at the zero crossing of every half cycle of the AC waveform. This zero loss switching of the link allows rapid energy variations to be achieved without the usual frequency proportional switching loss. Several field-oriented control systems were developed by LeRC and General Dynamics Space Systems Division under contract to NASA. A description of a single motor, electromechanical actuation system is presented. Then, focus is on a conceptual design for an AC electric vehicle. This design incorporates an induction motor/generator together with a flywheel for peak energy storage. System operation and implications along with the associated circuitry are addressed. Such a system would greatly improve all-electric vehicle ranges over the Federal Urban Driving Cycle (FUD).

Burrows, Linda M.↗

Timing system for firing widely spaced test nuclear detonations

The national weapons design laboratories (Los Alamos National Laboratory and Lawrence Livermore National Laboratory) test fire nuclear devices at the Nevada Test Site (NTS), which is spread over an area of over 1200 square miles (a bit larger than the state of Rhode island). On each test there are hundreds of high time resolution recordings made of nuclear output waveforms and other phenomena. In order to synchronize these recordings with each other, with the nuclear device, and with offsite recordings, there is a requirement that the permanent command center and the outlying temporary firing sites be time tied to each other and to UTC to permit firing the shot at a predetermined time with an accuracy of about a microsecond. The system is so designed that this can reduce to about 100 nanoseconds if it should prove necessary in the future.

Ralph E. Partridge↗

A numerical model for sonic boom propagation through an inhomogeneous, windy atmosphere

The ZEPHYRUS computer model calculates sonic boom distortion during propagation through the atmosphere. The model includes the effects of nonlinear distortion, attenuation, dispersion, and wind. Trial runs with the model indicate that, in general, stable shocks have not formed when the sonic boom reaches the ground. Also, the rise time of the lead shock may strongly depend on the overall waveform shape, and may be significantly increased by purely dispersive effects when matching occurs between the rise time and the characteristic oxygen molecular relaxation time.

Robinson, Leick D.↗

Wave equations and computational models for sonic boom propagation through a turbulent atmosphere

The improved simulation of sonic boom propagation through the real atmosphere requires greater understanding of how the transient acoustic pulses popularly termed sonic booms are affected by atmospheric turbulence. A nonlinear partial differential equation that can be used to simulate the effects of smaller-scale atmospheric turbulence on sonic boom waveforms is described. The equation is first order in the time derivative and involves an extension of geometrical acoustics to include diffraction phenomena. Various terms in the equation are explained in physical terms. Such terms include those representing convection at the wave speed, diffraction, molecular relaxation, classical dissipation, and nonlinear steepening. The atmospheric turbulence enters through an effective sound speed, which varies with all three spatial coordinates, and which is the sum of the local sound speed and the component of the turbulent flow velocity projected along a central ray that connects the aircraft trajectory with the listener.

Pierce, Allan D.↗

Simulations of sonic boom ray tube area fluctuations for propagation through atmospheric turbulence including caustics via a Monte Carlo method

A theory which gives statistical predictions for how often sonic booms propagating through the earth's turbulent boundary layer will encounter caustics, given the spectral properties of the atmospheric turbulence, is outlined. The theory is simple but approximately accounts for the variation of ray tube areas along ray paths. This theory predicts that the variation of ray tube areas is determined by the product of two similar area factors, psi (x) and phi (x), each satisfying a generic harmonic oscillator equation. If an area factor increases the peak acoustic pressure decreases, and if the factor decreases the peak acoustic pressure increases. Additionally, if an area factor decreases to zero and becomes negative, the ray has propagated through a caustic, which contributes a phase change of 90 degrees to the wave. Thus, it is clear that the number of times that a sonic boom wave passes through a caustic should be related to the distorted boom waveform received on the ground. Examples are given based on a characterization of atmospheric turbulence due to the structure function of Tatarski as modified by Crow.

Sparrow, Victor W.↗

Pulsed plane wave analytic solutions for generic shapes and the validation of Maxwell's equations solvers

Generic shapes are subjected to pulsed plane waves of arbitrary shape. The resulting scattered electromagnetic fields are determined analytically. These fields are then computed efficiently at field locations for which numerically determined EM fields are required. Of particular interest are the pulsed waveform shapes typically utilized by radar systems. The results can be used to validate the accuracy of finite difference time domain Maxwell's equations solvers. A two-dimensional solver which is second- and fourth-order accurate in space and fourth-order accurate in time is examined. Dielectric media properties are modeled by a ramping technique which simplifies the associated gridding of body shapes. The attributes of the ramping technique are evaluated by comparison with the analytic solutions.

Yarrow, Maurice↗

Acoustic nonlinearity in dispersive solids

An investigation to consider the effects of dispersion on the generation of the static acoustic wave component is presented. It is considered that an acoustic toneburst may be modeled as a modulated continuous waveform and that the generated initial static displacement pulse may be viewed as a modulation-confined disturbance. A theoretical model for the generation of the acoustic modulation solitons evolved is developed and experimental evidence in samples of vitreous silica demonstrating the essential validity of the model is provided.

Cantrell, John H.↗

The behavior of a Costas loop in the presence of space telemetry signals

When the Costas loop is operated in the presence of a residual carrier space telemetry signal, the loop reconstructs its carrier reference from an input signal whose carrier component is not completely suppressed. The telemetry signal investigated in this work is generated by phase shift-keying the data onto a subcarrier and then phase modulating onto the sinusoidal carrier. The telemetry modulation index, telemetry bit rate, subcarrier waveform, and subcarrier frequency are shown to be the key system parameters that contribute to the performance degradation of a Costas loop. Furthermore, the effect of Doppler shift on the loop is also investigated in this work.

Nguyen, Tien M.↗

Bispectral analysis of equatorial spread F density irregularities

Bispectral analysis has been applied to density irregularities at frequencies 5-30 Hz observed with a sounding rocket launched from Peru in March 1983. Unlike the power spectrum, the bispectrum contains statistical information about the phase relations between the Fourier components which make up the waveform. In the case of spread F data from 475 km the 5-30 Hz portion of the spectrum displays overall enhanced bicoherence relative to that of the background instrumental noise and to that expected due to statistical considerations, implying that the observed f exp -2.5 power law spectrum has a significant non-Gaussian component. This is consistent with previous qualitative analyses. The bicoherence has also been calculated for simulated equatorial spread F density irregularities in approximately the same wavelength regime, and the resulting bispectrum has some features in common with that of the rocket data. The implications of this analysis for equatorial spread F are discussed, and some future investigations are suggested.

Labelle, J.↗

Rapid oscillations in cataclysmic variables. VIII - YY Draconis (=3A 1148 + 719)

A 16th magnitude cataclysmic variable presumably a dwarf nova, was detected near one of the positions permitted for the hard (2-10 keV) X-ray source 3A 1148 + 719. The optical and UV spectra of YY Dra are fairly typical of cataclysmic variables, except that the TiO absorption bands of an M dwarf can be seen for greater than 5000 A. This shows that the accretion disk is intrinsically faint in quiescence, suggesting a very low accretion rate. Yet the fairly blue continuum slope in the vacuum UV indicates the presence of a small hot object, presumably the white dwarf. The radial velocities at H-alpha indicate a 4.0-hr orbital period, and the IR light curve appears to show the expected 'double-humped' waveform from the distorted secondary. High-speed photometry in the U band reveals a stable periodicity of about 1-percent semiamplitude at a period of 275 s, with some power also in the subharmonic at about 550 s.

Patterson, J.↗