Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Aeroelastic Tailoring of a Plate Wing with Functionally Graded Materials

This work explores the use of functionally graded materials for the aeroelastic tailoring of a metallic cantilevered plate-like wing. Pareto trade-off curves between dynamic stability (flutter) and static aeroelastic stresses are obtained for a variety of grading strategies. A key comparison is between the effectiveness of material grading, geometric grading (i.e., plate thickness variations), and using both simultaneously. The introduction of material grading does, in some cases, improve the aeroelastic performance. This improvement, and the physical mechanism upon which it is based, depends on numerous factors: the two sets of metallic material parameters used for grading, the sweep of the plate, the aspect ratio of the plate, and whether the material is graded continuously or discretely.

Dunning, Peter D.↗

Electrophilic Impact of High-Oxidation State Main-Group Metal and Ligands on Alkane C–H Activation and Functionalization Reactions

High-oxidation state main-group metal complexes are potential alternatives to transition metals for electrophilic alkane C–H functionalization reactions. Yet, there is little known about how selection of the p-block, main-group metal and ligand impact alkane C–H activation and functionalization thermodynamics and reactivity. This work reports density functional theory calculations used to determine qualitative and quantitative features of C–H activation and metal-methyl functionalization energy landscapes for reaction between high-oxidation state d 10 s 0 In III , Tl III , Sn IV , and Pb IV carboxylate complexes with methane. While the main-group metal influences the C–H activation barrier height in a periodic manner, the carboxylate ligand has a much larger quantitative impact on C–H activation with stabilized carboxylate anions inducing the lowest barriers. For metal-methyl reductive functionalization reactions, the main-group metal dramatically influences the barrier heights, which are correlated to reaction thermodynamics and bond heterolysis energies as a model for two-electron reduction energies. Generally, this work begins to outline which main-group metals and carboxylate ligands could be useful for alkane functionalization systems that utilize electrophilic C–H activation and metal-alkyl functionalization reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory study on the coupling and reactions of diferuloylputrescine as a lignin monomer

Diferuloylputrescine has been found in a variety of plant species, and recent work has provided evidence of its covalent bonding into lignin. Results from nuclear magnetic resonance spectroscopy revealed the presence of bonding patterns consistent with homo-coupling of diferuloylputrescine and the possibility of cross-coupling with lignin. In the present work, density functional theory calculations have been applied to assess the energetics associated with radical coupling, rearomatization, and dehydrogenation for possible homo-coupled dimers of diferuloylputrescine and cross-coupled dimers of diferuloylputrescine and coniferyl alcohol. Furthermore, the values obtained for these reaction energetics are consistent with those reported for monolignols and other novel lignin monomers. As such, this study shows that there would be no thermodynamic impediment to the incorporation of diferuloylputrescine into the lignin polymer and its addition to the growing list of non-canonical lignin monomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear threshold effects and neutron strength functions

The present work is devoted to study of spectroscopic aspects, in terms of neutron strength function, for the threshold effects with non-light nuclei. Relations to the neutron strength functions of the anomal effects observed at threshold of neutron analogue channel, in deuteron stripping reactions on A ≈ 90 mass target nuclei and in nucleon mirror reactions with A ≈ 30 nuclei, are established. It is proved that these threshold effects follow the mass dependance of the neutron strength functions. The connection between threshold effects and neutron strength functions, proves that the threshold effects are related to spectroscopy of ancestral zero-energy neutron particle resonance. One can conclude the threshold effects depend not only on penetration factors of opening neutron channel, as in Cusp Theory, but also on Multichannel Reaction Dynamics as well as on Spectroscopy of neutron threshold state. The present study is based on Reduced Scattering Matrix, describing the effect of invisible threshold channel on open observed ones. The determining role of Nuclear Reaction Dynamics, Quasiresonant Scattering and Spectroscopy of Neutron Threshold State, on threshold effects is evinced.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Comparison of Exact and Model Exchange–Correlation Potentials for Molecules

Accurate exchange–correlation (XC) potentials for three-dimensional systems–via solution of the inverse density functional theory (DFT) problem–are now available to test the quality of DFT approximations. Herein, the exact XC potential for seven molecules–dihydrogen at four different bond-lengths, lithium hydride, water, and ortho-benzyne–are computed from full configuration interaction reference densities. These are compared to model XC potentials from nonlocal (B3LYP, HSE06, SCAN0, and M08-HX) and semilocal/local (SCAN, PBE, and PW92) XC functionals. Whereas for most systems, relative errors in the ground-state densities are O(10 –3 –10 –2 ) , the model XC potentials have much higher errors of O(10 –1 –10 0 ) . Among the model XC functionals, SCAN0 offers the best agreement with the exact XC potential, underlining the significance of satisfying exact conditions as well as including nonlocal effects in XC functionals. This work indicates that tests against the exact XC potential will provide a promising new direction for building more accurate XC functionals for DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functional integrals and inequivalent representations in Quantum Field Theory

We discuss canonical transformations in Quantum Field Theory in the framework of the functional-integral approach. In contrast with ordinary Quantum Mechanics, canonical transformations in Quantum Field Theory are mathematically more subtle due to the existence of unitarily inequivalent representations of canonical commutation relations. When one works with functional integrals, it is not immediately clear how this algebraic feature manifests itself in the formalism. Here we attack this issue by considering the canonical transformations in the context of coherent-state functional integrals. Specifically, in the case of linear canonical transformations, we derive the general functional-integral representations for both transition amplitude and partition function phrased in terms of new canonical variables. By means of this, we show how in the infinite-volume limit the canonical transformations induce a transition from one representation of canonical commutation relations to another one and under what conditions the representations are unitarily inequivalent. We also consider the partition function and derive the energy gap between statistical systems described in two different representations which, among others, allows to establish a connection with continuous phase transitions. We illustrate the inner workings of the outlined mechanism by discussing two prototypical systems: the van Hove model and the Bogoliubov model of weakly interacting Bose gas. - Highlights: • Functional integrals are sensitive to representations of the Heisenberg–Weyl algebra. • Inequivalent representations can be exhibited in the functional integral formalism. • Passage among inequivalent representations is seen as second-order phase transition. • The inequivalence of representations is physically marked by an infinite energy gap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure, Stability, and Electronic Properties of Boron Suboxide: A Density Functional Theory Study

Boron suboxide (B 6 O) is a boron-rich compound derived from the α-rhombohedral boron lattice with extreme hardness and unusual semiconducting properties. In this work, density functional theory (DFT) was used to show that unit cell volume, mechanical strength, band gaps, and thermodynamic stabilities of B 6 O were influenced by the interstitial elements and point defects at the icosahedral sites. While the hexagonal unit cell volume (HUCV) varies with interstitial occupancy, it is the icosahedral defect that weakens the intrinsic bulk modulus of B 6 O. Using the hybrid HSE functional, we confirmed that the perfect B 6 O bulk is a p-type semiconductor with a direct band gap of 2.8 eV. Furthermore, by screening α-boron compounds systematically, we found that a simple octet rule may offer a consistent explanation for the variations in the computed electronic structures. The formation free energies calculated over a wide range of temperatures (0–2500 K) and pressures (0–80 GPa) predict that formations of interstitial defects become favorable only at higher temperatures (ca. 1800 K) in bulk B 6 O lattices. The nudged elastic band (NEB) method was employed to identify the minimum energy pathways for the diffusions of dislocated B and O atoms. The diffusion of icosahedral B atoms has an energy barrier of 0.16 eV. More complex B diffusion paths involving the reorganization of icosahedral boron atoms incur higher barriers (>1 eV). In contrast, the diffusion of interstitial O atoms is facile with a barrier of 0.4 eV. Lastly, successive O insertions into the α-B lattice were performed using DFT to generate a basic understanding of the oxidation process. Furthermore, these calculations provide fundamental atomistic insights into the growth of B 6 O crystals and control of their point defects.

36 MATERIALS SCIENCE↗

Data Fusion via Neural Network Entropy Minimization for Target Detection and Multi-Sensor Event Classification

Broadly applicable solutions to multimodal and multisensory fusion problems across domains remain a challenge because effective solutions often require substantive domain knowledge and engineering. The chief questions that arise for data fusion are in when to share information from different data sources, and how to accomplish the integration of information. The solutions explored in this work remain agnostic to input representation and terminal decision fusion approaches by sharing information through the learning objective as a compound objective function. The objective function this work uses assumes a one-to-one learning paradigm within a one-to-many domain which allows the assumption that consistency can be enforced across the one-to-many dimension. The domains and tasks we explore in this work include multi-sensor fusion for seismic event location and multimodal hyperspectral target discrimination. We find that our domain- informed consistency objectives are challenging to implement in stable and successful learning because of intersections between inherent data complexity and practical parameter optimization. While multimodal hyperspectral target discrimination was not enhanced across a range of different experiments by the fusion strategies put forward in this work, seismic event location benefited substantially, but only for label-limited scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Does DFT+U mimic hybrid density functionals?

Here, this work examines the question of how a Hubbard U correction to a local exchange–correlation functional compares with adding Hartree–Fock exchange to a local functional for both solid-state and molecular properties. We compute a solid-state property, namely the band gap, and thermochemical molecular properties, in particular main-group bond energies, transition-metal–ligand bond energies, and barrier heights, to elucidate whether the DFT+U method mimics hybrid DFT. We find that a calculation with a Hubbard U correction may or may not mimic a hybrid functional – depending on the atom, the subshell, and the property to which it is applied. For band gaps, we find that adding a Hubbard U correction to the valence d orbitals of transition metals increases the band gap, which thereby gets closer to the experimental value, while adding a Hubbard U correction to valence s or p orbitals of main group elements need not always increase the band gap. For molecular thermochemistry, we find that adding a Hubbard U correction to a local density functional need not have the same effect as adding Hartree–Fock exchange to a local density functional. For example when compared to a local DFT, hybrid DFT increases the barrier height in all cases, but DFT+U does not always increase the barrier height. For the band gaps of transition metal monoxides, the Hubbard-corrected results lowered the mean errors significantly and were comparable to what could be achieved with a much more expensive hybrid functional, but for reaction barrier heights and bond energies the Hubbard correction can lower the mean error by approximately a kcal/mol. As part of the analysis, we also compare VASP and Gaussian 09 calculations for the same density functional.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatial distribution of metals within the liver acinus and their perturbation by PCB126

Animal studies show that exposure to the environmental pollutant 3,3',4,4',5-pentachlorobiphenyl (PCB126) causes alterations in hepatic metals as measured in acid-digested volume-adjusted tissue. These studies lack the detail of the spatial distribution within the liver. Here we use X-ray fluorescence microscopy (XFM) to assess the spatial distribution of trace elements within liver tissue. Liver samples from male Sprague Dawley rats, treated either with vehicle or PCB126, were formalin fixed and paraffin embedded. Serial sections were prepared for traditional H&E staining or placed on silicon nitride windows for XFM. With XFM, metal gradients between the portal triad and the central vein were seen, especially with copper and iron. These gradients change with exposure to PCB126, even reverse. This is the first report of how micronutrients vary spatially within the liver and how they change in response to toxicant exposure. In addition, high concentrations of zinc clusters were discovered in the extracellular space. PCB126 treatment did not affect their presence, but did alter their elemental makeup suggesting a more general biological function. Further work is needed to properly evaluate the gradients and their alterations as well as classify the zinc clusters to determine their role in liver function and zinc homeostasis.

copper↗

Light-Enhanced Ion Migration in Two-Dimensional Perovskite Single Crystals Revealed in Carbon Nanotubes/Two-Dimensional Perovskite Heterostructure and Its Photomemory Application

Two-dimensional (2D) hybrid perovskite sandwiched between two long-chain organic layers is an emerging class of low-cost semiconductor materials with unique optical properties and improved moisture stability. Unlike conventional semiconductors, ion migration in perovskite is a unique phenomenon possibly responsible for long carrier lifetime, current-voltage hysteresis, and low-frequency giant dielectric response. While there are many studies of ion migration in bulk hybrid perovskite, not much is known for its 2D counterparts, especially for ion migration induced by light excitation. Here, we construct an exfoliated 2D perovskite/carbon nanotube (CNT) heterostructure field effect transistor (FET), not only to demonstrate its potential in photomemory applications, but also to study the light induced ion migration mechanisms. We show that the FET I-V characteristic curve can be regulated by light and shows two opposite trends under different CNT oxygen doping conditions. Our temperature-dependent study indicates that the change in the I-V curve is probably caused by ion redistribution in the 2D hybrid perovskite. The first principle calculation shows the reduction of the migration barrier of I vacancy under light excitation. The device simulation shows that the increase of 2D hybrid perovskite dielectric constant (enabled by the increased ion migration) can change the I-V curve in the trends observed experimentally. Finally, the so synthesized FET shows the multilevel photomemory function. Our work shows that not only we could understand the unique ion migration behavior in 2D hybrid perovskite, it might also be used for many future memory function related applications not realizable in traditional semiconductors.

36 MATERIALS SCIENCE↗

Semi-local Density Functional Approximations for Bulk, Surface, and Confinement Physics

Due to its balance of accuracy and computational cost, density functional theory has become the method of choice for computing the electronic structure and related properties of materials. However, present-day semi-local approximations to the exchange-correlation energy of density functional theory break down for materials containing d and f electrons. In this report we summarize the results of our research efforts within the LDRD 200202 titled "Making density functional theory work for all materials" in addressing this issue. Our efforts are grouped into two research thrusts. In the first thrust, we develop an exchange-correlation functional (BSC functional) within the subsystem functional formalism. It enables us to capture bulk, surface, and confinement physics with a single, semi-local exchange-correlation functional in density functional theory calculations. We present the analytical properties of the BSC functional and demonstrate that the BSC functional is able to capture confinement physics more accurately than standard semi-local exchange-correlation functionals. The second research thrust focusses on developing a database for transition metal binary compounds. The database consists of materials properties (formation energies, ground-state energies, lattice constants, and elastic constants) of 26 transition metal elements and 89 transition metal alloys. It serves as a reference for benchmarking computational models (such as lower-level modeling methods and exchange-correlation functionals). We expect that our database will significantly impact the materials science community. We conclude with a brief discussion on the future research directions and impact of our results.

36 MATERIALS SCIENCE↗

Ni and Co Incorporation in Forsterite: A Density Functional Theory Study with Hubbard Correction

Ni and Co are critical elements for the world economy and modern technologies. Mafic and ultramafic deposits represent low-grade yet abundant alternatives to traditional Ni and Co ores. Here, in this work, density functional theory (DFT) with the Hubbard U correction (DFT+U) was used to simulate the incorporation of Ni and Co in forsterite (Mg 2 SiO 4 ), the Mg endmember of olivine, a common mineral in mafic and ultramafic rocks. Hubbard U terms for Ni and Co were parametrized using a series of oxide, hydroxide, carbonate, silicate, and sulfide minerals relevant to extraction and recovery of Ni and Co from mafic and ultramafic deposits. Electronic, energetic, magnetic, and structural properties were considered in the parametrization. For each of Ni and Co, an effective Hubbard correction (U eff ) value that optimized agreement with either experimental data or a hybrid exchange-correlation functional for all of the minerals considered is reported. DFT+U ab initio molecular dynamics (AIMD) simulations of Ni and Co incorporated into the M1 and M2 octahedral sites of forsterite were then performed. Ni and Co substitution in the M1 site was more energetically favorable than substitution in the M2 site, in agreement with published partition coefficients. AIMD trajectories were used to compute extended X-ray absorption fine structure (EXAFS) spectra of Ni in the M1 and M2 sites for direct fitting to a published experimental spectrum of Ni in a natural San Carlos olivine sample. The results of the fit indicated that ordering of Ni in the M1 site was not as strong at the low Ni concentrations relevant to mafic and ultramafic silicate minerals as that at the higher concentrations of the Ni-Mg olivine solid solutions studied to date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiferroic ground states in free standing perovskite-based nanodots: a density functional theory study

In this work, we use density functional theory to investigate the possibility of polar and multiferroic states in free-standing, perovskite-based nanodots at the atomic limit of miniaturization: single unit cells with terminations which allow centro-symmetry. We consider both A-O and B-O 2 terminations for three families of nanodots: (i) A = Ba with B = Ti, Zr, and Hf; (ii) A = Ca and Sr with B = Ti; and (iii) A = Na and K with B = Nb. We find all A–O terminated dots to be non-polar and to exhibit cubic symmetry (except for K 8 NbO 6 ), regardless of the presence of ferroelectricity in the bulk. In contrast, all the B–O 2 terminated nanodots considered relax to a non-cubic ground state. Rather surprisingly, all of these structures exhibit polar ground states (except NaNb 8 O 12 ). We propose a new structural parameter, the cluster tolerance factor (CTF), to determine whether a particular chemistry will result in a polar ground state nanodot, analogous to the Goldschmidt factor for bulk ferroelectrics. In addition, we find that all A–O terminated (except Ca 8 TiO 6 ) and all polar B–O 2 terminated nanodots are magnetic, where none show magnetism in the bulk. As with bulk systems, multiferroicity in the B–O 2 terminated dots originates from separation between spin density in peripheral B atoms and polarity primarily caused by the off-center central A atom. Our findings stress that surface termination plays a crucial role in determining whether ferroelectricity is completely suppressed in perovskite-based materials at their limit of miniaturization.

36 MATERIALS SCIENCE↗

MODELING STATISTICAL PROPERTIES OF SOLAR ACTIVE REGIONS THROUGH DIRECT NUMERICAL SIMULATIONS OF 3D-MHD TURBULENCE

Statistical properties of the Sun's photospheric turbulent magnetic field, especially those of the active regions (ARs), have been studied using the line-of-sight data from magnetograms taken by the Solar and Heliospheric Observatory and several other instruments. This includes structure functions and their exponents, flatness curves, and correlation functions. In these works, the dependence of structure function exponents ({zeta}{sub p}) of the order of the structure functions (p) was modeled using a non-intermittent K41 model. It is now well known that the ARs are highly turbulent and are associated with strong intermittent events. In this paper, we compare some of the observations from Abramenko et al. with the log-Poisson model used for modeling intermittent MHD turbulent flows. Next, we analyze the structure function data obtained from the direct numerical simulations (DNS) of homogeneous, incompressible 3D-MHD turbulence in three cases: sustained by forcing, freely decaying, and a flow initially driven and later allowed to decay (case 3). The respective DNS replicate the properties seen in the plots of {zeta}{sub p} against p of ARs. We also reproduce the trends and changes observed in intermittency in flatness and correlation functions of ARs. It is suggested from this analysis that an AR in the onset phase of a flare can be treated as a forced 3D-MHD turbulent system in its simplest form and that the flaring stage is representative of decaying 3D-MHD turbulence. It is also inferred that significant changes in intermittency from the initial onset phase of a flare to its final peak flaring phase are related to the time taken by the system to reach the initial onset phase.

79 ASTRONOMY AND ASTROPHYSICS↗

Science Requirements Working Group (SRWG) in float zone materials processing in space: A review

A summary and history of the Float Zone Working Group was presented. The functions of this working group are to: provide an informal forum of scientific investigators for the exchange of information and ideas in the approach of the solution of common problems in float zone processing, help plan the research and development necessary to place the float zone process on a firm base of scientific understanding and advanced technological development, establish the science requirements for the AFZES for Spacelab, and seek ways to maximize the advantages of the space environment in the pursuit of these goals.

Fowle, A. A.↗

Performance Analysis: Work Control Events Identified January - August 2010

This performance analysis evaluated 24 events that occurred at LLNL from January through August 2010. The analysis identified areas of potential work control process and/or implementation weaknesses and several common underlying causes. Human performance improvement and safety culture factors were part of the causal analysis of each event and were analyzed. The collective significance of all events in 2010, as measured by the occurrence reporting significance category and by the proportion of events that have been reported to the DOE ORPS under the ''management concerns'' reporting criteria, does not appear to have increased in 2010. The frequency of reporting in each of the significance categories has not changed in 2010 compared to the previous four years. There is no change indicating a trend in the significance category and there has been no increase in the proportion of occurrences reported in the higher significance category. Also, the frequency of events, 42 events reported through August 2010, is not greater than in previous years and is below the average of 63 occurrences per year at LLNL since 2006. Over the previous four years, an average of 43% of the LLNL's reported occurrences have been reported as either ''management concerns'' or ''near misses.'' In 2010, 29% of the occurrences have been reported as ''management concerns'' or ''near misses.'' This rate indicates that LLNL is now reporting fewer ''management concern'' and ''near miss'' occurrences compared to the previous four years. From 2008 to the present, LLNL senior management has undertaken a series of initiatives to strengthen the work planning and control system with the primary objective to improve worker safety. In 2008, the LLNL Deputy Director established the Work Control Integrated Project Team to develop the core requirements and graded elements of an institutional work planning and control system. By the end of that year this system was documented and implementation had begun. In 2009, training of the workforce began and as of the time of this report more than 50% of authorized Integration Work Sheets (IWS) use the activity-based planning process. In 2010, LSO independently reviewed the work planning and control process and confirmed to the Laboratory that the Integrated Safety Management (ISM) System was implemented. LLNL conducted a cross-directorate management self-assessment of work planning and control and is developing actions to respond to the issues identified. Ongoing efforts to strengthen the work planning and control process and to improve the quality of LLNL work packages are in progress: completion of remaining actions in response to the 2009 DOE Office of Health, Safety, and Security (HSS) evaluation of LLNL's ISM System; scheduling more than 14 work planning and control self-assessments in FY11; continuing to align subcontractor work control with the Institutional work planning and control system; and continuing to maintain the electronic IWS application. The 24 events included in this analysis were caused by errors in the first four of the five ISMS functions. The most frequent cause was errors in analyzing the hazards (Function 2). The second most frequent cause was errors occurring when defining the work (Function 1), followed by errors during the performance of work (Function 4). Interestingly, very few errors in developing controls (Function 3) resulted in events. This leads one to conclude that if improvements are made to defining the scope of work and analyzing the potential hazards, LLNL may reduce the frequency or severity of events. Analysis of the 24 events resulted in the identification of ten common causes. Some events had multiple causes, resulting in the mention of 39 causes being identified for the 24 events. The most frequent cause was workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete. The second most frequent cause was unclear, incomplete or confusing documents directing the work. Together, these two causes were mentioned 17 times and contributed to 13 of the events. All of the events with the cause of ''workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete'' had this error in the first two ISMS functions: define the work and analyze the hazard. This means that these causes result in the scope of work being ill-defined or the hazard(s) improperly analyzed. Incomplete implementation of these functional steps leads to the hazards not being controlled. The causes are then manifested in events when the work is conducted. The process to operate safely relies on accurately defining the scope of work. This review has identified a number of examples of latent organizational weakness in the execution of work control processes.

99 GENERAL AND MISCELLANEOUS↗

Moving Beyond Drop-In Replacements: Performance-Advantaged Biobased Chemicals Workshop Summary Report

BETO held the Moving beyond Drop-In Replacements: Performance-Advantaged Biobased Chemicals Workshop on June 1, 2017, in Denver, Colorado. Approximately 90 stakeholders attended, representing companies, national laboratories, government agencies, and academic institutions. A list of workshop attendees who agreed to share their contact information can be found in Appendix A. The breakdown of stakeholders is shown in Figure 3 below. The day began with a keynote presentation from Nichole Fitzgerald of BETO to give participants an overview of the Office’s current work on functional replacements, as well as to outline the goals of the workshop. This was followed by two keynote presentations from industry representatives—Dale McIntyre (Behr Masco) and Michael Saltzberg (DuPont Industrial Biosciences)—on their current work with performance-enhanced biobased chemicals. Participants then attended two breakout sessions in smaller groups to provide feedback. In the afternoon, a third and final keynote—given by Dr. Brent Shanks (Center for Biorenewable Chemicals, Iowa State University)— covered potential strategies for targeting future research in this area, followed by a final breakout session on the same topic. A detailed agenda can be found in Appendix B.

09 BIOMASS FUELS↗