Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WELL LOGGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Interpreting the Strain Tensor During Injection into a Reservoir

A suite of well tests was conducted to evaluate the feasibility of measuring and interpreting the strain tensor during injection. Water was injected at 1 liter/s for a few days to a few weeks into a well completed at a depth of 530 m in the Bartlesville sandstone in the North Avant Field in Oklahoma. The strain tensor was measured using strainmeters at a depth of 30m and a distance of 220m from the well. We used a Gladwin strainmeter, a state-of-the-art geodetic strainmeter, as well as novel borehole strainmeters developed for the project. After processing, the horizontal strains were tensile and the vertical strain was compressive during injection. The radial strain was less than the circumferential strain. Strain magnitudes increased during injection and recovered afterward. The strain rate was as fast as 100 nanostrain/d at the start of injection, and decreased to 10 nanostrain/d after a few days. The normal strain signals were approximately proportional to the log of time during the first few days of injection, and the semi-log slope was 50 to 75 nanostrain. Data from the Gladwin strainmeter were essentially identical to data from a strainmeter we developed using optical fiber sensors. Tilt was measured using two tiltmeters, but the tilts were erratic compared to the normal strain and were of limited value. Strain data were analyzed using a strain type-curve method, an analytical solution to a poroelastic inhomogeneity, and a stochastic inversion method. Poroelastic simulations explain the data well. Results from the interpretation methods are consistent with each other, and with independent information characterizing the area. The hydraulic diffusivity is approximately 0.5 m2/s and the permeability is between 100 and 500 mD, according to analysis of the strain signals. This is consistent with measurements of permeability from cores, and with analyses of pressure transients. The analyses indicate that Young’s modulus of the reservoir is between 2 and 6 GPa. Strain interpretations indicate the well intersects a permeable lens with a maximum dimension of 500 to 1,000 m. An isopach map of coarse-grained sand confirms a feature roughly 1,000 m in lateral extent. The results demonstrate that the strain signal measured at shallow (30m) depth can be used to infer properties and heterogeneities in an underlying reservoir or aquifer.

Murdoch, Larry↗

MORPHOLOGICAL EVOLUTION OF GALAXIES FROM ULTRA-DEEP HUBBLE SPACE TELESCOPE WIDE FIELD CAMERA 3 IMAGING: THE HUBBLE SEQUENCE AT z {approx} 2

We use ultra-deep Hubble Space Telescope Wide Field Camera 3/infrared imaging of the Hubble Ultra Deep Field to investigate the rest-frame optical morphologies of a mass-selected sample of galaxies at z {approx} 2. We find a large variety of galaxy morphologies, ranging from large, blue, disk-like galaxies to compact, red, early-type galaxies. We derive rest-frame u - g color profiles for these galaxies and show that most z {approx} 2 galaxies in our sample have negative color gradients such that their cores are red. Although these color gradients may partly be caused by radial variations in dust content, they point to the existence of older stellar populations in the centers of z {approx} 2 galaxies. This result is consistent with an 'inside-out' scenario of galaxy growth. We find that the median color gradient is fairly constant with redshift: ({Delta}(u - g{sub rest})/{Delta}(log r)){sub median} = -0.47, -0.33, and -0.46 for z {approx} 2, z {approx} 1, and z = 0, respectively. Using structural parameters derived from surface brightness profiles we confirm that at z {approx} 2 galaxy morphology correlates well with specific star formation rate. At the same mass, star-forming galaxies have larger effective radii, bluer rest-frame u - g colors, and lower Sersic indices than quiescent galaxies. These correlations are very similar to those at lower redshift, suggesting that the relations that give rise to the Hubble sequence at z = 0 are already in place for massive galaxies at this early epoch.

79 ASTRONOMY AND ASTROPHYSICS↗

SciPhon : a data analysis software for nuclear resonant inelastic X-ray scattering with applications to Fe, Kr, Sn, Eu and Dy

We present the synchrotron radiation technique of nuclear resonant inelastic X-ray scattering (NRIXS), also known as nuclear resonance vibrational spectroscopy or nuclear inelastic scattering, provides a wealth of information on the vibrational properties of solids. It has found applications in studies of lattice dynamics and elasticity, superconductivity, heme biochemistry, seismology, isotope geochemistry and many other fields. It involves probing the vibrational modes of solids by using the nuclear resonance of Mössbauer isotopes such as 57 Fe, 83 Kr, 119 Sn, 151 Eu and 161 Dy. After data reduction, it provides the partial phonon density of states of the Mössbauer isotope that is investigated, as well as many other derived quantities such as the mean force constant of the chemical bonds and the Debye velocity. The data reduction is, however, not straightforward and involves removal of the elastic peak, normalization and Fourier–Log transformation. Furthermore, some of the quantities derived are highly sensitive to details in the baseline correction. A software package and several novel procedures to streamline and hopefully improve the reduction of the NRIXS data generated at sector 3ID of the Advanced Photon Source have been developed. The graphical user interface software is named SciPhon and runs as a Mathematica package. It is easily portable to other platforms and can be easily adapted for reducing data generated at other beamlines. Several tests and comparisons are presented that demonstrate the usefulness of this software, whose results have already been used in several publications. Here, the SciPhon software is used to reduce Kr, Sn, Eu and Dy NRIXS data, and potential implications for interpreting natural isotopic variations in those systems are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Lidar Buoy Data Analysis: Basic Assessment of Observed Conditions and Instrument Performance Off Virginia and New Jersey

One of the challenges for developing offshore wind energy in the United States has been a lack of long-term observations to characterize the wind resource and design load conditions and to provide validation for the numerical weather prediction models. To address this challenge, the U.S. Department of Energy supported the procurement in 2014 and subsequent deployment of two buoys equipped with motion-compensated lidars and a comprehensive set of supporting meteorological and oceanographic (“metocean”) measurement systems. Each of the systems was deployed off the U.S. East Coast in excess of one year—one each near the coasts of Virginia and New Jersey. One notable observation from both buoys is the dramatic dependence of the wind shear on atmospheric stability as indicated by the air-sea temperature difference. This observation suggests that the commonly used neutral log law will not be a fully suitable representation of wind shear off the U.S. East Coast. This report provides a basic summary of observations at each location from key systems on each of the buoys as well as an assessment of instrument performance. These data are beginning to fill a long-standing observational gap for the wind energy community in the United States.

17 WIND ENERGY↗

Modeling the Earth's radiation belts. A review of quantitative data based electron and proton models

The evolution of quantitative models of the trapped radiation belts is traced to show how the knowledge of the various features has developed, or been clarified, by performing the required analysis and synthesis. The Starfish electron injection introduced problems in the time behavior of the inner zone, but this residue decayed away, and a good model of this depletion now exists. The outer zone electrons were handled statistically by a log normal distribution such that above 5 Earth radii there are no long term changes over the solar cycle. The transition region between the two zones presents the most difficulty, therefore the behavior of individual substorms as well as long term changes must be studied. The latest corrections to the electron environment based on new data are outlined. The proton models have evolved to the point where the solar cycle effect at low altitudes is included. Trends for new models are discussed; the feasibility of predicting substorm injections and solar wind high-speed streams make the modeling of individual events a topical activity.

Vette, J. I.↗

Spectral Evidence for Heating at Large Column Mass in Umbral Solar Flare Kernels. I. IRIS Near-UV Spectra of the X1 Solar Flare of 2014 October 25

The GOES X1 flare SOL2014-10-25T17:08:00 was a three-ribbon solar flare observed with the Interface Region Imaging Spectrograph (IRIS)in the near-UV(NUV)and far-UV. One of the flare ribbons crossed a sunspot umbra, producing a dramatic, ∼1000% increase in the NUV continuum radiation. We comprehensively analyze the UV spectral data of the umbral flare brightenings, which provide new challenges for radiative−hydrodynamic modeling of the chromospheric velocity field and the white-light continuum radiation. The emission line profiles in the umbral flare brightenings exhibit redshifts and profile asymmetries, but these are significantly smaller than in another, well-studied X-class solar flare. We present a ratio of the NUV continuum intensity to the FeIIλ2814.45intensity. This continuum-to-line ratio is a new spectral diagnostic of significant heating at high column mass (log m/[gcm−2]>−2) during solar flares because the continuum and emission line radiation originate from relatively similar temperatures but moderately different optical depths. The full spectral readout of these IRIS data also allow for a comprehensive survey of the flaring NUV landscape: in addition to many lines of Fe II and Cr II, we identify a new solar flare emission line, HeIλ2829.91(as previously identified in laboratory and early-type stellar spectra). The Fermi/GBM hard X-ray data provide inputs to radiative−hydrodynamic models (which will be presented in Paper II) in order to better understand the large continuum-to-line ratios, the origin of the white-light continuum radiation, and the role of electron beam heating in the low atmosphere.

Adam F Kowalski↗

A Gravitational-wave Measurement of the Hubble Constant Following the Second Observing Run of Advanced LIGO and Virgo

This paper presents the gravitational-wave measurement of the Hubble constant (H(0)) using the detections from the first and second observing runs of the Advanced LIGO and Virgo detector network. The presence of the transient electromagnetic counterpart of the binary neutron star GW170817 led to the first standard-siren measurement of H(0). Here we additionally use binary black hole detections in conjunction with galaxy catalogs and report a joint measurement. Our updated measurement is H(0) = 69(+16,-8) km/s Mpc (68.3% of the highest density posterior interval with a flat-in-log prior) which is an improvement by a factor of 1.04 (about 4%) over the GW170817-only value of 6(+17,-8) km/s Mpc. A significant additional contribution currently comes from GW170814, a loud and well-localized detection from a part of the sky thoroughly covered by the Dark Energy Survey. With numerous detections anticipated over the upcoming years, an exhaustive understanding of other systematic effects are also going to become increasingly important. These results establish the path to cosmology using gravitational-wave observations with and without transient electromagnetic counterparts.

B. P. Abbott↗

Method to account for natural fracture induced elastic anisotropy in geomechanical characterization of shale gas reservoirs

Shale has been usually recognized as a transverse isotropic (TI) medium in conventional geomechanical log interpretation due to its laminated nature. However, when natural fractures exist in the shale rock, additional elastic anisotropy is introduced, converting laminated Shale to an orthorhombic (OB) medium. Previous studies illustrate that neglecting the natural fracture induced anisotropy in shale geomechanical log interpretation could lead to inaccurate evaluations of elastic moduli and in-situ stresses. In this paper, a new method is developed to account for the natural fracture induced anisotropy in geomechanical log interpretation based upon the TI acoustic model developed by the author and a characterization technique of elastic wave anisotropy (Sayers, 1991). The new OB model incorporates the four acoustic log data inputs and five modeling constraints in a nonlinear optimization algorithm to solve for the nine independent stiffness coefficients of an OB rock, and further to solve for the geomechanical properties and in-situ stress profiles in an OB formation. The new method was validated with a Marcellus Gas Shale field case. Both the new OB model and the conventional TI model were applied to interpret the minimum horizontal stress profile for the same formation. By comparing the results, the OB model is more robust than the TI from two aspects. First, the average stress magnitude predicted by the OB model is closer to the one measured by the Diagnostic Fracture Injection Test (DFIT). Second, the OB model predicts a more obvious stress barrier between the lower Marcellus and upper Onondaga Limestone than the TI model does. Finally, the predicted stress barrier is consistent with the observation of the microseismic events of a horizontal well drilled and completed nearby, which reveals that no hydraulic fracture propagates downward through the bottom boundary of Marcellus Shale into the underlying Onondaga Limestone.

03 NATURAL GAS↗

Not all moissanites are created equal: New constraints on moissanite from metamorphic rocks of Bulgaria

Here, terrestrial moissanite (SiC) is widely reported as an ultra-high pressure mineral occurring in kimberlites, diamonds and ultramafic/mafic rocks of mantle origin. However, the conditions of crystallization remain largely unknown. Moreover, dozens of SiC occurrences have been reported from continental crust sources such as granitoids, andesite–dacite volcanic rocks and their breccia, metasomatic and metamorphic rocks, and even limestones. The validity of many of these reports is still debated primarily due to possible contaminations from the widespread use of synthetic SiC abrasives in samples preparation. Indeed, reports of well-documented in-situ occurrences of moissanite in association with co-existing minerals are still scarce. The only condition of moissanite formation that is agreed upon is that extremely reducing media are required (e.g. 4.5–6 log units below the iron-wustite buffer). Here, we report the new occurrence of moissanite that was found in-situ within the garnet–staurolite–mica schists of Topolovgrad metamorphic group of Triassic age in Southern Bulgaria. The 10–300 μm moissanite crystals are situated within 0.1–1.2 mm isolated clusters, filled with amorphous carbon and nanocrystalline graphite. Most of moissanite crystals are 15R (rhombohedral) and 6H (hexagonal) polytypes, and one prismatic crystal, found within them, exhibits unusual concentric polytypical zoning with core (15R), intermediate zone (6H) and rim (3C-cubic). Experimental data show that this type of polytypical zonation is likely due to a decrease in temperature (or/and pressure?) and changes in Si/C ratio. Indeed, amphibolite facies metamorphism (500–580°C – garnet–staurolite zone) followed by a subsequent cooling during the retrograde stage of green schist facies metamorphism (~400–500°C) could have provided a change in temperature. The SiC containing clusters exhibit evidence that they are pre-metamorphic, and we hypothesize that their protolith was a “black shale” material likely rich in carbon, hydrocarbon and terrigenous silica. The latter served as a source of isolated chemically-reduced media, which is required for SiC formation. Other concepts to explain moissanite occurrences in metasedimentary rocks are also discussed. Importantly, our findings show that the formation conditions of moissanite are likely more variable than previously recognized.

15R-SiC↗

SPECTROSCOPIC ANALYSIS OF THE WHITE DWARF KUV 02196+2816: A NEW UNRESOLVED DA+DB DEGENERATE BINARY

A spectroscopic analysis of the DBA (or DAB) white dwarf KUV 02196+2816 is presented. The observed hydrogen- and helium-line profiles are shown to be incompatible with model spectra calculated under the assumption of a homogeneous hydrogen and helium chemical composition. In contrast, an excellent fit to the optical spectrum of KUV 02196+2816 can be achieved if the object is interpreted as an unresolved double degenerate composed of a hydrogen-line DA star and a helium-line DB star. The atmospheric parameters obtained from the best fit are T {sub eff} = 27170 K and log g = 8.09 for the DA star, T {sub eff} = 36340 K and log g = 8.09 for the DB star, which implies that the total mass of the system (M {approx} 1.4 M {sub sun}) is very close to the Chandrasekhar limit. Moreover, the effective temperature of the DB stars lies well within the so-called DB gap where very few bright DB stars are found. The implications of this discovery with respect to the DAB and DBA spectral classes and to the evolution of double-degenerate binaries are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

MAPPING THE SHORES OF THE BROWN DWARF DESERT. II. MULTIPLE STAR FORMATION IN TAURUS-AURIGA

We have conducted a high-resolution imaging study of the Taurus-Auriga star-forming region in order to characterize the primordial outcome of multiple star formation and the extent of the brown dwarf desert. Our survey identified 16 new binary companions to primary stars with masses of 0.25-2.5 M{sub sun}, raising the total number of binary pairs (including components of high-order multiples) with separations of 3-5000 AU to 90. We find that {approx}2/3-3/4 of all Taurus members are multiple systems of two or more stars, while the other {approx}1/4-1/3 appear to have formed as single stars; the distribution of high-order multiplicity suggests that fragmentation into a wide binary has no impact on the subsequent probability that either component will fragment again. The separation distribution for solar-type stars (0.7-2.5 M{sub sun}) is nearly log-flat over separations of 3-5000 AU, but lower-mass stars (0.25-0.7 M{sub sun}) show a paucity of binary companions with separations of {approx}>200 AU. Across this full mass range, companion masses are well described with a linear-flat function; all system mass ratios (q = M{sub B} /M{sub A} ) are equally probable, apparently including substellar companions. Our results are broadly consistent with the two expected modes of binary formation (free-fall fragmentation on large scales and disk fragmentation on small scales), but the distributions provide some clues as to the epochs at which the companions are likely to form.

79 ASTRONOMY AND ASTROPHYSICS↗

CaloChallenge 2022: a community challenge for fast calorimeter simulation

Here, we present the results of the ‘Fast Calorimeter Simulation Challenge 2022’—the CaloChallenge. We study state-of-the-art generative models on four calorimeter shower datasets of increasing dimensionality, ranging from a few hundred voxels to a few tens of thousand voxels. The 31 individual submissions span a wide range of current popular generative architectures, including variational autoencoders (VAEs), generative adversarial networks (GANs), normalizing flows, diffusion models, and models based on conditional flow matching. We compare all submissions in terms of quality of generated calorimeter showers, as well as shower generation time and model size. To assess the quality we use a broad range of different metrics including differences in one-dimensional histograms of observables, KPD/FPD scores, AUCs of binary classifiers, and the log-posterior of a multiclass classifier. The results of the CaloChallenge provide the most complete and comprehensive survey of cutting-edge approaches to calorimeter fast simulation to date. In addition, our work provides a uniquely detailed perspective on the important problem of how to evaluate generative models. As such, the results presented here should be applicable for other domains that use generative AI and require fast and faithful generation of samples in a large phase space.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

FORTÉ Machine Learning

Of the non-corrupted data collected by the Orbiting Experiment (forté) satellite’s Photo-Diode Detector during the year 2001, I estimate that 7.9% of 914 894 signals are noise. My result differs dramatically from Guillen’s estimate of 96%. To arrive at this estimate, I used Gaussian mixture model (GMM) clustering–unsupervised machine learning–to aggregate the wave forms into groups based on the absolute value of the lowest 25 positive frequency discrete Fourier transform coefficients. Then, I marked several of the groups as noise by inspecting a random sampling of wave forms from each group. Marking groups as either noise or non-noise is a supervised binary classification operation. After removing the signals in noise groups from further consideration, I clustered the remaining signals into families. Again, I used a GMM, but for the familial clustering I used a Non-Negative Matrix Factorization feature vector transform. The result was 9 distinct families of lightning signals, as well as a second stage of noise filtering. To efficiently represent the entirety of the signal space, I broke each family into deciles based on their distance from the family mean. In this case, distance means the log-likelihood based on the GMM. Signals in lower deciles are more similar in shape and amplitude to their family average. I took the top 200 samples from each decile of each group, resulting in 18 000 signals. These signal approximately represent the entirety of the forté observations. To represent outliers, I also kept a zoo of the 1000 signals furthest from any family’s average. All told, the resulting data set represents the forté data with a reduction of about 51:1. To allow synthesis of an arbitrarily large number of test signals, I also captured each family’s average signal and the time-sample covariance matrix over the signals in each family. Using these two pieces of information, I can synthesize new waveforms by using a Gaussian random realization from the family average and covariance matrix. I wrote a program to test the synthesis quality. The program shows me two signals on the screen, one synthesized and one randomly drawn from the data. I attempted to identify the synthesized signal. Although the synthesis is imperfect, in an A/B comparison I only correctly chose the synthesized signal 36% of the time.

97 MATHEMATICS AND COMPUTING↗

Stratigraphically Controlled Stress Variations at the Hydraulic Fracture Test Site-1 in the Midland Basin, TX

We investigated the relationship between stratigraphy, stress, and microseismicity at the Hydraulic Fracture Test Site-1. The site comprises two sets of horizontal wells in the Wolfcamp shale and a deviated well drilled after hydraulic fracturing. Regional stresses indicate normal/strike-slip faulting with E-W compression. Stress measurements in vertical and horizontal wells show that the minimum principal stress varies with depth. Strata with high clay and organic content show high values of the least compressive stress, consistent with the theory of viscous stress relaxation. By integrating data from core, logs, and the hydraulic fracturing stages, we constructed a stress profile for the Wolfcamp sequence, which predicts how much pressure is required for hydraulic fracture growth. We applied the results to fracture orientation data from image logs to determine the population of pre-existing faults that are expected to slip during stimulation. We also determined microseismic focal plane mechanisms and found slip on steeply dipping planes striking NW, consistent with the orientations of potentially active faults predicted by the stress model. This case study represents a general approach for integrating stress measurements and rock properties to predict hydraulic fracture growth and the characteristics of injection-induced microseismicity.

microseismicity↗

Tethered Satellite System Contingency Investigation Board

The Tethered Satellite System (TSS-1) was launched aboard the Space Shuttle Atlantis (STS-46) on July 31, 1992. During the attempted on-orbit operations, the Tethered Satellite System failed to deploy successfully beyond 256 meters. The satellite was retrieved successfully and was returned on August 6, 1992. The National Aeronautics and Space Administration (NASA) Associate Administrator for Space Flight formed the Tethered Satellite System (TSS-1) Contingency Investigation Board on August 12, 1992. The TSS-1 Contingency Investigation Board was asked to review the anomalies which occurred, to determine the probable cause, and to recommend corrective measures to prevent recurrence. The board was supported by the TSS Systems Working group as identified in MSFC-TSS-11-90, 'Tethered Satellite System (TSS) Contingency Plan'. The board identified five anomalies for investigation: initial failure to retract the U2 umbilical; initial failure to flyaway; unplanned tether deployment stop at 179 meters; unplanned tether deployment stop at 256 meters; and failure to move tether in either direction at 224 meters. Initial observations of the returned flight hardware revealed evidence of mechanical interference by a bolt with the level wind mechanism travel as well as a helical shaped wrap of tether which indicated that the tether had been unwound from the reel beyond the travel by the level wind mechanism. Examination of the detailed mission events from flight data and mission logs related to the initial failure to flyaway and the failure to move in either direction at 224 meters, together with known preflight concerns regarding slack tether, focused the assessment of these anomalies on the upper tether control mechanism. After the second meeting, the board requested the working group to complete and validate a detailed integrated mission sequence to focus the fault tree analysis on a stuck U2 umbilical, level wind mechanical interference, and slack tether in upper tether control mechanism and to prepare a detailed plan for hardware inspection, test, and analysis including any appropriate hardware disassembly.

Source record↗

ISS Operations Cost Reductions Through Automation of Real-Time Planning Tasks

In 2008 the Johnson Space Center s Mission Operations Directorate (MOD) management team challenged their organization to find ways to reduce the costs of International Space station (ISS) console operations in the Mission Control Center (MCC). Each MOD organization was asked to identify projects that would help them attain a goal of a 30% reduction in operating costs by 2012. The MOD Operations and Planning organization responded to this challenge by launching several software automation projects that would allow them to greatly improve ISS console operations and reduce staffing and operating costs. These projects to date have allowed the MOD Operations organization to remove one full time (7 x 24 x 365) ISS console position in 2010; with the plan of eliminating two full time ISS console support positions by 2012. This will account for an overall 10 EP reduction in staffing for the Operations and Planning organization. These automation projects focused on utilizing software to automate many administrative and often repetitive tasks involved with processing ISS planning and daily operations information. This information was exchanged between the ground flight control teams in Houston and around the globe, as well as with the ISS astronaut crew. These tasks ranged from managing mission plan changes from around the globe, to uploading and downloading information to and from the ISS crew, to even more complex tasks that required multiple decision points to process the data, track approvals and deliver it to the correct recipient across network and security boundaries. The software solutions leveraged several different technologies including customized web applications and implementation of industry standard web services architecture between several planning tools; as well as a engaging a previously research level technology (TRL 2-3) developed by Ames Research Center (ARC) that utilized an intelligent agent based system to manage and automate file traffic flow, archiving f data, and generating console logs. This technology called OCAMS (OCA (Orbital Communication System) Management System), is now considered TRL level 9 and is in daily use in the Mission Control Center in support of ISS operations. These solutions have not only allowed for improved efficiency on console; but since many of the previously manual data transfers are now automated, many of the human error prone steps have been removed, and the quality of the planning products has improved tremendously. This has also allowed our Planning Flight Controllers more time to focus on the abstract areas of the job, (like the complexities of planning a mission for 6 international crew members with a global planning team), instead of being burdened with the administrative tasks that took significant time each console shift to process. The resulting automation solutions have allowed the Operations and Planning organization to realize significant cost savings for the ISS program through 2020 and many of these solutions could be a viable

Hall, Timothy A.↗

A NEW SYNTHETIC LIBRARY OF THE NEAR-INFRARED Ca II TRIPLET INDICES. I. INDEX DEFINITION, CALIBRATION, AND RELATIONS WITH STELLAR ATMOSPHERIC PARAMETERS

Adopting the SPECTRUM package, which is a stellar spectral synthesis program, we have synthesized a comprehensive set of 2890 near-infrared (NIR) synthetic spectra with a resolution and wavelength sampling similar to the Sloan Digital Sky Survey (SDSS) and the forthcoming Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) spectra. During the synthesis, we applied the 'New grids of ATLAS9 Model Atmosphere' to develop a grid of local thermodynamic equilibrium model atmospheres for effective temperatures (T{sub eff}) ranging from 3500 to 7500 K, for surface gravities (log g) from 0.5 to 5.0 dex, for metallicities ([Fe/H]) from -4.0 to 0.5 dex, and for solar ([{alpha}/Fe] = 0.0 dex) and non-solar ([{alpha}/Fe] = +0.4 dex) abundances. This synthetic stellar library is composed of 1350 solar scaled abundance (SSA) and 1530 non-solar scaled abundance (NSSA) spectra, grounding on which we have defined a new set of NIR Ca II triplet indices and an index CaT as the sum of the three. These defined indices were automatically measured on every spectrum of the synthetic stellar library and calibrated with the indices computed on the observational spectra from the INDO-U.S. stellar library. In order to check the effect of {alpha}-element enhancement on the so-defined Ca II indices, we compared indices measured on the SSA spectra with those on the NSSA ones at the same trine of stellar parameters (T{sub eff}, log g, [Fe/H]); luckily, little influences of {alpha}-element enhancement were found. Furthermore, comparisons of our synthetic indices with the observational ones from measurements on the INDO-U.S. stellar library, the SDSS-DR7 and SDSS-DR8 spectroscopic survey are presented, respectively, for dwarfs and giants in specific. For dwarfs, our synthetic indices could well reproduce the behaviors of the observational indices versus stellar parameters, which verifies the validity of our index definitions for dwarfs. For giants, the consistency between our synthetic indices and the observational ones does not appear to be as good. However, a new synthetic library of NIR Ca II indices has been founded for deeper studies on the NIR wave band of stellar spectra, and this library is particularly appropriate for the SDSS and the forthcoming LAMOST stellar spectra. We have regressed the strength of the CaT index as a function of stellar parameters for both dwarfs and giants after a series of experimental investigations into relations of the indices with stellar parameters. For dwarfs, log g has little effect on the indices, while [Fe/H] and T{sub eff} play a role together. The leading factor is probably [Fe/H], which changes the strength of the indices by a positive trend. For giants, log g starts to influence the strength of the indices by a negative trend for the metal-poor, and even impact deeply for the metal-rich; besides, [Fe/H] and T{sub eff} still matter. In addition, we briefly discussed the major differences between our Ca II triplet indices and the CaHK doublet indices. Ultimately, a supplemental experiment was carried out to show that spectral noises do have effects on our set of NIR Ca II indices. However, the influence is not weak enough to be ignored if the signal-to-noise ratio falls below 20.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental and modeling studies of PR and ND oxalate solubility to high ionic strengths: Insight into actinide(III) oxalates

Actinide oxalates are chemical compounds important to nuclear industry, ranging from actinide separation in waste reprocessing, to production of specialty actinides, and to disposal of high level nuclear waste (HLW) and spent nuclear fuel (SNF). In this study, the solubility constants for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O by performing solubility experiments in HNO 3 and mixtures of HNO 3 and H 2 C 2 O 4 at 23.0 ± 0.2 °C have been determined. The targeted starting materials, Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O, were successfully synthesized at room temperature using PrCl 3 , NdCl 3 and oxalic acid as the source metrials. Then, we utilized the targeted solubility-controlling phases to conduct solubility measurements. There was no phase change over the entire periods of experiments, demonstrating that Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O were the solubility-controlling phases in our respective experiments. Based on our experimental data, we have developed a thermodynamic model for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O in the mixtures of HNO 3 and H 2 C 2 O 4 to high ionic strengths. The model for Pr 2 (C 2 O 4 ) 3 •10H 2 O reproduces well the reported experimental data for Pu 2 (C 2 O 4 ) 3 •10H 2 O, which are not utilized for the model development, demonstrating that Pr(III) is an excellent analog for Pu(III). Similarly, the model for Nd 2 (C 2 O 4 ) 3 •10H 2 O reproduces the solubility of Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The Pitzer model was used for the calculation of activity coefficients. Based on the published, well established model for dissociation constants for oxalic acid and stability constants for actinide-oxalate complexes [i.e., AmC 2 O 4 + , and Am(C 2 O 4 ) 2 - ] to high ionic strengths, we have obtained the solubility constants (log 10 K 0 ) for the following reactions at 25 °C, Pr 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Pr 3+ + 3C 2 O 4 2- + 10H 2 O(l). Nd 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Nd 3+ + 3C 2 O 4 2- + 10H 2 O(l). to be -30.82 ± 0.30 (2σ), and - 31.14 ± 0.35 (2σ), respectively. These values for can be directly applied to Pu 2 (C 2 O 4 ) 3 •10H 2 O, Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The model established for actinide oxalates by this study provides the needed knowledge with regard to solubilities of actinide/REE oxalates at various ionic strengths, and is expected to find applications in many fields, including the geological disposal of nuclear waste and the mobility of REE under the surface conditions, as Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O can be regarded as the pure Pr and Nd end-members of deveroite, a recently discovered natural REE oxalate with the following stoichiometry, (Ce 1.01 Nd 0.33 La 0.32 Pr 0.11 Y 0.11 Sm 0.01 Pb 0.04 U 0.03 Th 0.01 Ca 0.04 ) 2.01 (C 2 O 4 ) 2.99 •9.99H 2 O. Regarding its importance in the geological disposal of nuclear waste, Am 2 (C 2 O 4 ) 3 •10H 2 O/Pu 2 (C 2 O 4 ) 3 •10H 2 O/Cm 2 (C 2 O 4 ) 3 •10H 2 O can be the source-term phase for actinides, as demonstrated by the instance in the disposal in clay/shale formations. This is exemplified by the stability of Am 2 (C 2 O 4 ) 3 •10H 2 O in comparison with Am(OH) 3 (am), Am(OH) 3 (s) and AmCO 3 (OH)(s) under the relevant geological repository conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗