Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Vectorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Application of a vectorized particle simulation in high-speed near-continuum flow

An efficient particle simulation technique, developed for use on vector architecture based supercomputers for studying hypersonic rarefied gas flows is employed to simulate the complex wake generated by Mach six flow over a 10 deg half-angle wedge for freestream Reynolds numbers of 1780 and 3560. Data obtained are compared against higher Reynolds number experimental results. Simulations utilized as many as 10 to the 5th computational cells and 10 to the 7th simulated particles having power-law interaction potentials. A code performance of 1.8-2.4 microsec of Cray-2 CPU time to process a single particle per timestep is achieved. Diffuse adiabatic and isothermal wedge surface models are used in this investigation. Although the wedge geometry is two-dimensional, the simulation incorporates a width-wise direction, resulting in a three-dimensional computation.

Woronowicz, Michael S.↗
NASA NTRS1989

Calculation of nonequilibrium hydrogen-air reactions with implicit flux vector splitting method

Two methods, fully- and loosely-coupled, are developed to incorporate nonequilibrium hydrogen-air chemistry into the fluid dynamic implicit flux vector splitting code (F3D). The new code (F3D/Chem) is validated against other existing codes for two cases: nozzle expansion, and shock-induced combustion around a blunt body. The shock-induced combustion case is compared also with an experimental data. The reaction rate constants are varied in an effort to reproduce the experimental data. The fully- and loosely-coupled methods are found to yield comparable results, but the computation time is shorter using the loosely-coupled method. The present method is found to reproduce results obtained using different existing codes. The experimental data was not reproduced with any selected rate coefficients set.

Lee, Seung-Ho↗
NASA NTRS1989

Off disk-center potential field calculations using vector magnetograms

A potential field calculation for off disk-center vector magnetograms that uses all the three components of the measured field is investigated. There is neither any need for interpolation of grid points between the image plane and the heliographic plane nor for an extension or a truncation to a heliographic rectangle. Hence, the method provides the maximum information content from the photospheric field as well as the most consistent potential field independent of the viewing angle. The introduction of polarimetric noise produces a less tolerant extrapolation procedure than using the line-of-sight extrapolation, but the resultant standard deviation is still small enough for the practical utility of this method.

Venkatakrishnan, P.↗
NASA NTRS1990

Thrust-Vector Deflectors For Spacecraft

Rotating shield steers thrust in desired direction. Report discusses use of thrust-vector deflectors (TVD's) to enhance controllability and reduce number of small rocket engines (thrustors) needed to control attitudes of artificial satellites. Developed in aircraft industry for use in jet engines. Principal advantages gained, lower cost and greater simplicity.

Soong, William C.↗
NASA NTRS1990

Processing Laser-Velocimetric Data By Vector Scanning

Velocity plots obtained in minutes instead of hours. Velocity scanning technique for processing flow-field data from pulsed-laser-velocimetry images into two-dimensional velocity-vector maps. Requires no special equipment other than charge-coupled-device (CCD) camera, circuitry to digitize output of camera, and computer. Once image data digitized, all processing done in computer.

Wernet, Mark P.↗
NASA NTRS1988

Independent Orbiter Assessment (IOA): Assessment of the ascent thrust vector control actuator subsystem FMEA/CIL

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA effort first completed an analysis of the Ascent Thrust Vector Control Actuator (ATVD) hardware, generating draft failure modes and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the NASA FMEA/CIL baseline with proposed Post 51-L updates included. A resolution of each discrepancy from the comparison is provided through additional analysis as required. This report documents the results of that comparison for the Orbiter ATVC hardware. The IOA product for the ATVC actuator analysis consisted of 25 failure mode worksheets that resulted in 16 potential critical items being identified. Comparison was made to the NASA baseline which consisted of 21 FMEAs and 13 CIL items. This comparison produced agreement on all CIL items. Based on the Pre 51-L baseline, all non-CIL FMEAs were also in agreement.

Wilson, R. E.↗
NASA NTRS1989

Aerodynamics of thrust vectoring

Thrust vectoring as a means to enhance maneuverability and aerodynamic performane of a tactical aircraft is discussed. This concept usually involves the installation of a multifunction nozzle. With the nozzle, the engine thrust can be changed in direction without changing the attitude of the aircraft. Change in the direction of thrust induces a significant change in the aerodynamic forces on the aircraft. Therefore, this device can be used for lift-augmenting as well as stability and control purposes. When the thrust is deflected in the longitudinal direction, the lift force and the pitching stability can be manipulated, while the yawing stability can be controlled by directing the thrust in the lateral direction.

Tseng, J. B.↗
NASA NTRS1988

Parallel algorithm for determining motion vectors in ice floe images by matching edge features

A parallel algorithm is described to determine motion vectors of ice floes using time sequences of images of the Arctic ocean obtained from the Synthetic Aperture Radar (SAR) instrument flown on-board the SEASAT spacecraft. Researchers describe a parallel algorithm which is implemented on the MPP for locating corresponding objects based on their translationally and rotationally invariant features. The algorithm first approximates the edges in the images by polygons or sets of connected straight-line segments. Each such edge structure is then reduced to a seed point. Associated with each seed point are the descriptions (lengths, orientations and sequence numbers) of the lines constituting the corresponding edge structure. A parallel matching algorithm is used to match packed arrays of such descriptions to identify corresponding seed points in the two images. The matching algorithm is designed such that fragmentation and merging of ice floes are taken into account by accepting partial matches. The technique has been demonstrated to work on synthetic test patterns and real image pairs from SEASAT in times ranging from .5 to 0.7 seconds for 128 x 128 images.

Manohar, M.↗
NASA NTRS1989

Engine inlet distortion in a 9.2 percent scale vectored thrust STOVL model in ground effect

Advanced Short Takeoff/Vertical Landing (STOVL) aircraft which can operate from remote locations, damaged runways, and small air capable ships are being pursued for deployment around the turn of the century. To achieve this goal, NASA Lewis Research Center, McDonnell Douglas Aircraft, and DARPA defined a cooperative program for testing in the NASA Lewis 9- by 15-foot low speed wind tunnel (LSWT) to establish a database for hot gas ingestion, one of the technologies critical to STOVL. Results are presented which show the engine inlet distortions (both temperature and pressure) in a 9.2 percent scale vectored thrust STOVL model in ground effects. Results are shown for the forward nozzle splay angles of 0 degrees, -6 degrees, and 18 degrees. The model support system had 4 degrees of freedom, heated high pressure air for nozzle flow, and a suction system exhaust for inlet flow. The headwind (freestream) velocity was varied from 8 to 23 knots.

Johns, Albert L.↗
NASA NTRS1989

A vectorized algorithm for 3D dynamics of a tethered satellite

Equations of motion characterizing the three dimensional motion of a tethered satellite during the retrieval phase are studied. The mathematical model involves an arbitrary number of point masses connected by weightless cords. Motion occurs in a gravity gradient field. The formulation presented accounts for general functions describing support point motion, rate of tether retrieval, and arbitrary forces applied to the point masses. The matrix oriented program language MATLAB is used to produce an efficient vectorized formulation for computing natural frequencies and mode shapes for small oscillations about the static equilibrium configuration; and for integrating the nonlinear differential equations governing large amplitude motions. An example of time response pertaining to the skip rope effect is investigated.

Wilson, Howard B.↗
NASA NTRS1990

Performance characteristics of a one-third-scale, vectorable ventral nozzle for SSTOVL aircraft

Several proposed configurations for supersonic short takeoff, vertical landing aircraft will require one or more ventral nozzles for lift and pitch control. The swivel nozzle is one possible ventral nozzle configuration. A swivel nozzle (approximately one-third scale) was built and tested on a generic model tailpipe. This nozzle was capable of vectoring the flow up to + or - 23 deg from the vertical position. Steady-state performance data were obtained at pressure ratios to 4.5, and pitot-pressure surveys of the nozzle exit plane were made. Two configurations were tested: the swivel nozzle with a square contour of the leading edge of the ventral duct inlet, and the same nozzle with a round leading edge contour. The swivel nozzle showed good performance overall, and the round-leading edge configuration showed an improvement in performance over the square-leading edge configuration.

Esker, Barbara S.↗
NASA NTRS1989

Evaluation of unambiguous vector winds from the Seasat scatterometer

In this paper, the vector winds produced by the JPL and the Goddard Space Flight Center (GSFC) ambiguity removal methods are compared for 14 days of overlap, and the data are checked for any systematic differences. This comparison draws attention to some possible sources of error in each data set and provides a first-order evaluation of the quality of the two ambiguity removal techniques. It was found that the directional differences are generally small and random, so that no significant differences occurred between spatially and temporally averaged wind fields constructed from the two data sets.

Chelton, Dudley B.↗
NASA NTRS1989

Engine inlet distortion in a 9.2 percent scaled vectored thrust STOVL model in ground effect

Advanced Short Takeoff/Vertical Landing (STOVL) aircraft which can operate from remote locations, damaged runways, and small air capable ships are being pursued for deployment around the turn of the century. To achieve this goal, a cooperative program has been defined for testing in the NASA Lewis 9- by 15-foot Low Speed Wind Tunnel (LSWT) to establish a database for hot gas ingestion, one of the technologies critical to STOVL. This paper presents results showing the engine inlet distortions (both temperature and pressure) in a 9.2 percent scale Vectored Thrust STOVL model in ground effects. Results are shown for the forward nozzle splay angles of 0, -6, and 18 deg. The model support system had 4 deg of freedom, heated high pressure air for nozzle flow, and a suction system exhaust for inlet flow. The headwind (freestream) velocity was varied from 8 to 23 kn.

Johns, Albert L.↗
NASA NTRS1990

A vectorized Lanczos eigensolver for high-performance computers

The computational strategies used to implement a Lanczos-based-method eigensolver on the latest generation of supercomputers are described. Several examples of structural vibration and buckling problems are presented that show the effects of using optimization techniques to increase the vectorization of the computational steps. The data storage and access schemes and the tools and strategies that best exploit the computer resources are presented. The method is implemented on the Convex C220, the Cray 2, and the Cray Y-MP computers. Results show that very good computation rates are achieved for the most computationally intensive steps of the Lanczos algorithm and that the Lanczos algorithm is many times faster than other methods extensively used in the past.

Bostic, Susan W.↗
NASA NTRS1990

A parallel-vector algorithm for rapid structural analysis on high-performance computers

A fast, accurate Choleski method for the solution of symmetric systems of linear equations is presented. This direct method is based on a variable-band storage scheme and takes advantage of column heights to reduce the number of operations in the Choleski factorization. The method employs parallel computation in the outermost DO-loop and vector computation via the 'loop unrolling' technique in the innermost DO-loop. The method avoids computations with zeros outside the column heights, and as an option, zeros inside the band. The close relationship between Choleski and Gauss elimination methods is examined. The minor changes required to convert the Choleski code to a Gauss code to solve non-positive-definite symmetric systems of equations are identified. The results for two large-scale structural analyses performed on supercomputers, demonstrate the accuracy and speed of the method.

Storaasli, Olaf O.↗
NASA NTRS1989

Vector performance analysis of three supercomputers - Cray-2, Cray Y-MP, and ETA10-Q

Results are presented of a series of experiments to study the single-processor performance of three supercomputers: Cray-2, Cray Y-MP, and ETA10-Q. The main object of this study is to determine the impact of certain architectural features on the performance of modern supercomputers. Features such as clock period, memory links, memory organization, multiple functional units, and chaining are considered. A simple performance model is used to examine the impact of these features on the performance of a set of basic operations. The results of implementing this set on these machines for three vector lengths and three memory strides are presented and compared. For unit stride operations, the Cray Y-MP outperformed the Cray-2 by as much as three times and the ETA10-Q by as much as four times for these operations. Moreover, unlike the Cray-2 and ETA10-Q, even-numbered strides do not cause a major performance degradation on the Cray Y-MP. Two numerical algorithms are also used for comparison. For three problem sizes of both algorithms, the Cray Y-MP outperformed the Cray-2 by 43 percent to 68 percent and the ETA10-Q by four to eight times.

Fatoohi, Rod A.↗
NASA NTRS1990

Performance characteristics of a one-third-scale, vectorable ventral nozzle for SSTOVL aircraft

Several proposed configurations for supersonic short takeoff, vertical landing aircraft will require one or more ventral nozzles for lift and pitch control. The swivel nozzle is one possible ventral nozzle configuration. A swivel nozzle (approximately one-third scale) was built and tested on a generic model tailpipe. This nozzle was capable of vectoring the flow up to + or - 23 deg from the vertical position. Steady-state performance data were obtained at pressure ratios to 4.5, and pitot-pressure surveys of the nozzle exit plane were made. Two configurations were tested: the swivel nozzle with a square contour of the leading edge of the ventral duct inlet, and the same nozzle with a round leading edge contour. The swivel nozzle showed good performance overall, and the round-leading-edge configuration showed an improvement in performance over the square-leading-edge configuration.

Esker, Barbara S.↗
NASA NTRS1990

Fundamentals of chemistry modeling applicable to a vectorized particle simulation

This paper describes the fundamentals of extending the vectorized particle simulation method derived by Baganoff and McDonald (1990), McDonald and Baganoff (1988), and McDonald (1989) for modeling chemically reacting flows. Details of reaction mechanics per reaction are presented, with particular attention given to the quantum nature of the vibrational mode. The models of reactive flows developed here were verified through a simulation of a superheated diatomic gas relaxing thermochemically to equilibrium in a reservoir.

Haas, Brian L.↗