Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VOIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

A Model for Tow Impregnation and Consolidation for Partially Impregnated Thermoset Prepregs

The formation and transport of voids in composite materials remains a key research area in composite manufacturing science. Knowledge of how voids, resin, and fiber reinforcement propagate throughout a composite material continuum from green state to cured state during an automated tape layup process is key to minimizing defects induced by void-initiated stress concentrations under applied loads for a wide variety of composite applications. This paper focuses on modeling resin flow in a deforming fiber tow during an automated process of partially impregnated thermoset prepreg composite material tapes. In this work, a tow unit cell based model has been presented that determines the consolidation and impregnation of a thermoset prepreg tape under an input pressure profile. A parametric study has been performed to characterize the behavior of varying tow speed and compaction forces on the degree of consolidation. Results indicate that increased tow consolidation is achieved with slower tow speeds and higher compaction forces although the relationship is not linear. The overall modeling of this project is motivated to address optimization of the 'green state' composite properties and processing parameters to reduce or eliminate 'cured state' defects, such as porosity and de-lamination. This work is partially funded by the Department of Energy under Award number DE-EE0001367.

36 MATERIALS SCIENCE↗

A Model for Tow Impregnation and Consolidation for Partially Impregnated Thermoset Prepregs

The formation and transport of voids in composite materials remains a key research area in composite manufacturing science. Knowledge of how voids, resin, and fiber reinforcement propagate throughout a composite material continuum from green state to cured state during an automated tape layup process is key to minimizing defects induced by void-initiated stress concentrations under applied loads for a wide variety of composite applications. This paper focuses on modeling resin flow in a deforming fiber tow during an automated process of partially impregnated thermoset prepreg composite material tapes. In this work, a tow unit cell based model has been presented that determines the consolidation and impregnation of a thermoset prepreg tape under an input pressure profile. A parametric study has been performed to characterize the behavior of varying tow speed and compaction forces on the degree of consolidation. Results indicate that increased tow consolidation is achieved with slower tow speeds and higher compaction forces although the relationship is not linear. The overall modeling of this project is motivated to address optimization of the 'green state' composite properties and processing parameters to reduce or eliminate 'cured state' defects, such as porosity and de-lamination. This work is partially funded by the Department of Energy under Award number DE-EE0001367.

36 MATERIALS SCIENCE↗

Carbon microtubes

A carbon microtube comprising a hollow, substantially tubular structure having a porous wall, wherein the microtube has a diameter of from about 10 .mu.m to about 150 .mu.m, and a density of less than 20 mg/cm.sup.3. Also described is a carbon microtube, having a diameter of at least 10 .mu.m and comprising a hollow, substantially tubular structure having a porous wall, wherein the porous wall comprises a plurality of voids, said voids substantially parallel to the length of the microtube, and defined by an inner surface, an outer surface, and a shared surface separating two adjacent voids.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Method of producing nanopatterned articles using surface-reconstructed block copolymer films

Nanopatterned surfaces are prepared by a method that includes forming a block copolymer film on a substrate, annealing and surface reconstructing the block copolymer film to create an array of cylindrical voids, depositing a metal on the surface-reconstructed block copolymer film, and heating the metal-coated block copolymer film to redistribute at least some of the metal into the cylindrical voids. When very thin metal layers and low heating temperatures are used, metal nanodots can be formed. When thicker metal layers and higher heating temperatures are used, the resulting metal structure includes nanoring-shaped voids. The nanopatterned surfaces can be transferred to the underlying substrates via etching, or used to prepare nanodot- or nanoring-decorated substrate surfaces.

36 MATERIALS SCIENCE↗

Benchmark Specifications and Results for ßeff in a HEU Metal System Using ORSphere

In the early 1970s Dr. John T. Mihalczo (team leader), J.J. Lynn, and J.R. Taylor performed experiments at the Oak Ridge Critical Experiments Facility (ORCEF) with highly enriched uranium (HEU) metal (called Oak Ridge Alloy or ORALLOY) in an attempt to recreate GODIVA I results with greater accuracy than those performed at Los Alamos National Laboratory in the 1950s (HEU-MET-FAST-001). The purpose of the Oak Ridge ORALLOY Sphere (ORSphere) experiments was to estimate the unreflected and unmoderated critical mass of an idealized sphere of uranium metal corrected to a density, purity, and enrichment such that it could be compared with the GODIVA I experiments. Part of the experimental series was the measurement of the delayed neutron fraction, ßeff, using time correlation measurements and using the central void reactivity measurement. The time correlations measurements were rejected by the experimenter. The measurements using the central void reactivity measurement yielded a ßeff value of 0.00657, which agrees well with the value measured with GODIVA I (0.0066). This measurement is evaluated, found to be acceptable, and discussed in extensive detail in “ORSphere: Physics Measurements for Bare, HEU(93.2) Metal Sphere". In order to determine the delayed neutron fraction using the central void reactivity delayed neutron parameters must be used. The experimenter utilized the delayed neutron parameters set forth by Keepin, Wimment, and Zeigler. If the derivation of the ßeff is repeated with different delayed neutron parameters from various modern nuclear data sets the resulting values vary greatly from the expected results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nanopatterned articles produced using surface-reconstructed block copolymer films

Nanopatterned surfaces are prepared by a method that includes forming a block copolymer film on a substrate, annealing and surface reconstructing the block copolymer film to create an array of cylindrical voids, depositing a metal on the surface-reconstructed block copolymer film, and heating the metal-coated block copolymer film to redistribute at least some of the metal into the cylindrical voids. When very thin metal layers and low heating temperatures are used, metal nanodots can be formed. When thicker metal layers and higher heating temperatures are used, the resulting metal structure includes nanoring-shaped voids. The nanopatterned surfaces can be transferred to the underlying substrates via etching, or used to prepare nanodot- or nanoring-decorated substrate surfaces.

36 MATERIALS SCIENCE↗

TEM characterization of a simultaneously neutron-irradiated and helium-injected PM2000 ODS alloy

Transmission electron microscopy (TEM) discs of PM2000 were coated on one side with a ~4 µm thick NiAl film and irradiated in HFIR to a neutron displacement damage dose of 21.2 dpa at 500°C. The dpa are primarily produced by fast neutrons, while the in situ He injection (ISHI) to 1230 appm derives from the thermal neutron two-step 59 Ni(n,α) reaction. A uniform He injection profile extends up to about 8 µm below the NiAl coating, hence the remaining material experiences only dpa damage (21.2 dpa at 500°C). This report summarizes analytical TEM analyses to compare the two different regions, i.e., simultaneous He-injection/displacement damage versus displacement damage only, or high and very low He/dpa ratios, respectively. TEM analyses of the He implanted region reveals a high density of small (<2 nm) He bubbles predominantly associated with dislocation loops in the matrix. Because of a very large grain size, no grain or subgrain boundaries were observed in the samples prepared by focused ion beam (FIB) micromachining. The only voids formed were associated with large ODS particles, all of which were amorphous, irrespective of particle size and level of He. The ODS particles range in size from 15-30 nm, and most particles have a single faceted void attached to it that ranges in size from 5 to 15 nm. On the non-implanted side of the sample, no He bubbles could be detected, and faceted voids were found on ~10% of the ODS particles. The He-implanted side contains both <100>{100} and ½<111>{111} dislocation loops and a low density of line dislocations, whereas the un-implanted side possesses predominantly line dislocations with a lower density of dislocation loops. In both regions, nanoscale fcc precipitates exhibiting a cube-on-cube orientation relationship with the bcc matrix were observed. Chemical analysis using energy dispersive x-ray spectroscopy (EDS) indicates this phase is rich in Al and Ti. It was also noted that substantial Cr segregation occurs around the dislocation loops, concurrent with Fe depletion. The clusters of fcc precipitates that do not appear to be associated with the existing loops or line dislocations. The amorphous Y-Al-O particles contain a high Al concentration (>20 at%) and Cr segregation/Fe-depletion at the periphery.

Jung, Hee Joon↗

Nanopatterned articles produced using reconstructed block copolymer films

Nanopatterned surfaces are prepared by a method that includes forming a block copolymer film on a substrate, annealing and surface reconstructing the block copolymer film to create an array of cylindrical voids, depositing a metal on the surface-reconstructed block copolymer film, and heating the metal-coated block copolymer film to redistribute at least some of the metal into the cylindrical voids. When very thin metal layers and low heating temperatures are used, metal nanodots can be formed. When thicker metal layers and higher heating temperatures are used, the resulting metal structure includes nanoring-shaped voids. The nanopatterned surfaces can be transferred to the underlying substrates via etching, or used to prepare nanodot- or nanoring-decorated substrate surfaces.

36 MATERIALS SCIENCE↗

A Revisit to the Hicks' Hyperbolic Two-pressure Two-phase Flow Model

Hicks’ two-phase flow model represents one of the earliest hyperbolic two-pressure two-phase flow models developed in the early 1980s. This model was developed under the separated flow condition, but could be potentially generalized for more realistic flow conditions that are of interest to reactor safety analysis (e.g., bubbly flow). This model is mathematically hyperbolic and therefore well- posed, as eigenvalues from the characteristic analysis found to be all real. Many currently popular two-pressure models are formulated similarly to Hicks’ two-pressure model, with the inclusion of a void fraction transport equation. The void fraction transport equation is closed using the knowledge of transverse velocity on the two-phase interface, which is assumed to be the solution of a Riemann problem in the transverse direction. Numerical experiments on two phenomenological test problems, i.e., the two-phase water faucet problem and the sedimentation problem, were performed using the Hicks’ model, as well as the single-pressure two-phase flow model. Numerical results demonstrate that the channel size, which appears in the void fraction transport equation, has significant impact on the behavior of the Hicks’ model. By comparing to single-pressure model results and available analytical solutions, it was found that Hicks’ model with very small channel width behaves similarly to the single-pressure model. On the contrary, Hicks’ model with large channel width, however, constantly leads to unphysical liquid-phase pressure. These numerical experiments indicate that using the Riemann problem to close the equation system in Hicks’ derivation might be a questionable approach. Further investigations are necessary to explore different approaches that will properly close the equation system without leading to unphysical behaviors.

42 ENGINEERING↗

Preliminary Physics Analysis of the Accident Tolerant Fuels Loop Experiment

After the Fukushima Daiichi power plant disaster in 2011, the United States Congress ordered the Department of Energy (DOE) to investigate new fuel and cladding types that would be more tolerant in an accident similar to the accident at Fukushima. The resulting program was dubbed the Accident Tolerant Fuels (ATF) program. As a part of this program, insertion is planned for an experiment to go into an ATR loop, and physics analysis must be performed. Discussed are the test fission power, void worth, and hardware failure reactivity insertion. For the sensor qualification test, the test fission power was 0 kW, the void worth was 0.42$, and the hardware failure was 0.01$ and 0.04$. For the fueled experiment, the safety case fission power was 170 kW, the void worth was 0.34$, and the hardware failure was 0$ and 0.03$.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Subtask 1.1 – Advanced Characterization of Unconventional Oil and Gas Reservoirs to Enhance CO2 Storage Resource Estimates

The Energy & Environmental Research Center (EERC) developed methods and approaches for advanced characterization of unconventional oil and gas reservoirs to enhance CO2 storage resource estimates using samples collected from organic-rich shales of the Bakken Formation. The project was funded under U.S. Department of Energy (DOE) Cooperative Agreement No. DE-FE0024233, with nonfederal cost share provided by Hitachi High Technologies America. The project participants included the EERC, Hitachi High Technologies America, the team at the National Energy Technology Laboratory’s (NETL’s) computed tomography (CT) scanning laboratory in Morgantown, West Virginia, and several NETL staff who have worked on CO2 storage resource estimation. Investigations on the use of subsurface geologic formations for CO2 storage have been ongoing for many years. In the last decade, improvements in directional drilling technology and hydraulic fracturing of organic-rich shale and other tight rock formations have opened new opportunities for CO2 storage, with the potential cobenefit of enhancing gas and oil recovery. Gas-bearing, organic-rich shales have been of particular interest as a carbon storage target because their ability to store large volumes of CO2 is implied by their ability to store methane; however, estimating the CO2 storage resource of organic-rich shales and other unconventional reservoirs is challenging because of the lack of detailed geologic and petrophysical data that are needed to develop improved volumetric equations. According to NETL’s method for estimating regional-scale CO2 storage resources, the key factors that control CO2 storage in geologic formations include void space within induced fractures, natural fractures and matrix pores, as well as the occurrence and distribution of organic matter (OM) and clay minerals. A key goal of this effort was to use field emission scanning electron microscopy (FESEM) analysis of fine-grain unconventional reservoir rocks coupled with advanced image analysis and machine learning techniques to quantify the occurrence and distribution of porosity, OM, and clay minerals. By better understanding the potential migration pathways of CO2 within tight rocks and quantifying the occurrence of sorptive components (OM and clays) along potential flow pathways, methods to estimate the CO2 storage resource of such rocks can be refined. The Bakken petroleum system (Bakken) was used as the source of rock samples for this effort because it includes organic-rich shales with contrasting degrees of thermal maturity as well as tight, nonshale clastic rocks with varying clay mineral content. To better understand the key components of interest in tight rock samples, the EERC worked closely with Hitachi to optimize the FESEM settings necessary to resolve the sample mineralogy, porosity and OM content at micro- to nanoscale resolution. The EERC also worked closely with Hitachi to apply and improve its advanced mineral identification and characterization system (AMICS) software so that it is better suited for mineral identification at the high resolution necessary to resolve features of interest in fine-grained rocks such as organic-rich shales. The EERC also applied advanced image analysis software packages, including Ilastik, to classify and quantify the key components of interest within the samples using FESEM imagery. These advanced techniques allowed for quantification and differentiation of the void space within fractures, pores and OM, as well as a technique to determine and quantify the key mineral and OM components surrounding pore spaces. Being able to better quantify the void space and the potential accessibility of CO2 to sorptive minerals or OM within tight rocks allows for improved estimation of the CO2 storage resource potential of organic-rich shales and other unconventional formations. The information derived from the image analysis techniques was used to refine NETL’s method for estimating regional-scale CO2 storage resources in collaboration with staff from NETL. An additional goal of this work was to better understand rates of CO2 permeation, flow pathways, and sorption in organic-rich shales and nonshale reservoir rocks and to evaluate potential changes in CO2 flow over time. The EERC conducted long-duration (several weeks) CO2 flow-through testing at reservoir conditions using Bakken shale and nonshale samples to assess CO2 permeation rates and retention/sorption within core plugs to represent bulk matrix behavior. Conventional isothermal adsorption testing over a range of pressure conditions was also performed on pulverized Bakken samples to better assess potential maximum sorptive capacity of the samples. The results of this testing illustrated the higher sorptive capacity of the Bakken shales when compared to the sorptive capacity of the nonshale reservoir rock, which contains very little OM when compared to the Bakken shales. The results also illustrate the differences in permeation behavior as a function of fracture flow versus matrix flow. In an attempt to visualize CO2 permeation and flow behavior in Bakken shale samples over time, the EERC collaborated with NETL’s CT Lab in Morgantown, West Virginia. A variety of tests were performed at the NETL lab on unfractured and fractured samples of the Bakken shale. The unfractured Bakken shale samples did not result in CO2 migration within the samples over the testing duration; thus imagery of CO2 migration pathways within the matrix of Bakken samples was not obtained. The results of the flow-through testing within fractured samples illustrate changes in CO2 permeation rates over time, with a trend of decreasing CO2 flow over time. The results of this effort suggest that FESEM analysis coupled with advanced image analysis and machine learning techniques are effective in characterizing and quantifying the mineralogy, porosity, fractures, and OM content of 2-D imagery at the high resolution needed to identify features of interest in tight rocks. In addition, the image analysis techniques allow for identification and quantification of different porosity types as well as the key mineral components and/or OM that CO2 would contact in the reservoir as it migrates through pores and fracture networks. This is key information needed to better estimate the CO2 storage resource potential of organic-rich shales and other tight reservoirs. Additional work is needed to determine the sorptive capacity of the individual sample components (OM and clay minerals) at reservoir conditions so that this approach and the refined CO2 storage resource equation can be applied to other shale and unconventional reservoirs. In addition, subsequent work should be performed to better understand the number of images needed to use stereological approaches to estimate the volume of sample components using 2-D imagery, to explore machine learning techniques to differentiate between induced vs. natural fractures, and to estimate the connectivity of pores and fracture networks using 2-D imagery. Being able to derive this information at the microscale would facilitate scaling up of the sample characterization data used for reservoir modeling and simulation to estimate the CO2 storage resource potential of tight formations.

03 NATURAL GAS↗

Manufacturing control systems and logic for prognosis of defects in composite materials

Presented are manufacturing control systems for composite-material structures, methods for assembling/operating such systems, and transfer molding techniques for predicting and ameliorating void conditions in fiber-reinforced polymer panels. A method for forming a composite-material construction includes receiving a start signal indicating a fiber-based preform is inside a mold cavity, and transmitting a command signal to inject pressurized resin into the mold to induce resin flow within the mold cavity and impregnate the fiber-based preform. An electronic controller receives, from a distributed array of sensors attached to the mold, signals indicative of pressure and/or temperature at discrete locations on an interior face of the mold cavity. The controller determines a measurement deviation between a calibrated baseline value and the pressure and/or temperature values for each of the discrete locations. If any one of the respective measurement deviations exceeds a calibrated threshold, a void signal is generated to flag a detected void condition.

36 MATERIALS SCIENCE↗

Superhydrophobic coating and process of making same

An improved superhydrophobic coating and a process of making it is provided herein. More particularly, a robust superhydrophobic coating is produced by using carbon dioxide to enhance the integration of a binder material into the superhydrophobic coating. The carbon dioxide may be used to infiltrate and fill the interstitial voids of a superhydrophobic material, such as diatomaceous earth. Consequently, occupying these voids in the superhydrophobic material effectively blocks other components (e.g., binders) from entering the voids. As a result, the coating formulations of the present invention are more robust and may strongly adhere to the substrates to which they are applied.

36 MATERIALS SCIENCE↗

Evaluating the Practicability of Multiphase CFD for BWR Fuel Assembly Analysis

Multiphase computational fluid dynamics (M-CFD) models of a boiling water reactor (BWR) fuel assembly have been generated in the commercial CFD code, STAR-CCM+ Ver.11.04.010-R8. The Eulerian multiphase approach was employed, in combination with a baseline ‘Zero Closure model’ for two-phase flow boiling, applicable to high void fraction regimes. The capability and practicability of MCFD for BWR fuel assembly were evaluated against the international OECD/NRC BWR Full-size Finemesh Bundle Test (BFBT) benchmark data. The benchmark selected, BFBT-4101-61, is a steady-state full power case, with high void fraction conditions. Geometrical modeling and mesh construction of BWR assemblies introduce challenges in generating high quality computational meshes, while retaining a low cell count to allow acceptable runtimes. In order to evaluate the scalability of the CFD code, parallel CFD simulations were carried out with the High Performance Computing (HPC) system of the Idaho National Laboratory. M-CFD results display good agreement with the experimental data for both local void fraction distribution and exit quality. The parallel speedup factor is linearly proportional to the number of processors up to 500 cores, and retains over 92% efficiency with 1000 cores. The execution time of the simulation decreased exponentially with increasing number of processors while the cost of the simulation increased linearly. The proposed baseline closure, in combination with the parallel performance of the STAR-CCM+ code demonstrated promising capabilities for analyzing BWR fuel assemblies.

97 MATHEMATICS AND COMPUTING↗

Systems and methods for additive manufacturing to encapsulate transformative colloidal suspensions

The present disclosure relates to an energy absorbing three dimensional (3D) structure. The structure may have an outer shell formed from a shell material. The outer shell may have a void forming a core volume. A transformative feedstock is contained in the void. The transformative feedstock is encapsulated within the outer shell, within the void, and provides enhanced energy absorbing properties to the 3D structure.

Mancini, Julie A.↗

Assessment of different fuel design options with SiC cladding for light water reactors

It is very important to avoid high tensile stresses in SiC if it is to be used safely as the cladding material in LWRs. To achieve this goal, three fuel design options are examined here: fuel pellets with a 10% vol central void, adding 10% vol BeO in UO{sub 2} fuel and replacing the gas gap with Lead-Bismuth Eutectic (LBE) bond. For each case, a neutronic analysis is first applied using CASMO-4E to obtain the required enrichment to achieve a fuel average burnup of 50 MWd/kgU. The fuel performance code FRAPCON, specifically FRAPCON-3.3 and FRAPCON-EP, is modified and then used to simulate the effects of steady-state irradiation in each case for typical PWR peak rod conditions. Key parameters like fuel average temperature and plenum pressure are examined for the relative performance of each approach. The results show that all three options can improve the fuel performance by lowering the fuel temperature as well as the plenum pressure. Fuel pellets with a central void design offers the most advantages since the larger void volume in the fuel rod results in the lowest plenum pressure, which is the limiting condition for safe operation of the SiC cladding. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nuclear reactor irradiation systems and methods

A reactor irradiation method is provided that can include irradiating Np or Am spheres within a target assembly of a nuclear reactor to form reacted spheres comprising Pu. The target assembly can define a solid core within an exterior housing, and a void between the exterior housing and the solid core, wherein the spheres occupy at least a portion of the void. The irradiating can include exposing the spheres to a neutron energy spectrum while the spheres are in the void of the target assembly to form irradiated spheres.

Katalenich, Jeffrey A.↗

Development of Surface Grain Relief on Self-Ion Irradiated Copper

The development of surface grain relief has been observed on self-ion irradiated pure polycrystalline copper. However, the mechanistic origin of this feature has yet to be determined. Two possible mechanisms, anisotropic creep relaxation of void swelling induced stresses and crystallographic orientation-dependent sputtering rate differences, are being investigated as the cause of this evolution. This work focuses on characterizing the surface development and investigating the mechanism of orientation-dependent sputtering. Based on the conditions under which these specimens were irradiated, preferential sputtering is not likely to be the cause of the observed grain relief. Surface grain relief can greatly influence the ability to non-destructively detect irradiation-induced effects in polycrystalline metals. Determining the origin of grain relief development is necessary before this surface feature can be used an indicator of irradiation-induced effects in pure copper and other alloys. The development of surface grain relief has been observed on self-ion irradiated pure polycrystalline copper irradiated to 100 dpa. This surface feature was first noted by measuring samples using transient grating spectroscopy and later confirmed using scanning electron microscopy. Calculations of single-crystal sputtering rates show that the difference in sputtering yields between a randomly-oriented solid and a low-index plane is not sufficient to account for the observed height difference. SEM images appear to show a maximum step-height difference of around 100 nm and differential sputtering can only account for differences on the order of 10 nm at most. This determination indicates that anisotropic creep relaxation may be the mechanistic origin of the observed surface features. If this is the case, which will be confirmed by future work, then TG spectroscopy may be an effective tool for the determination of the onset of certain radiation-damage evolution. For example, if the onset of creep relaxation is strongly correlated to a specific level of void swelling and if the surface features present as a result of creep relaxation can be observed using TG spectroscopy, then accurate determinations of particular levels of void swelling may be made. (authors)

36 MATERIALS SCIENCE↗